CEOS2.ADD

CEI SCSI ISA Boards

BASEDEV=CEOS2.ADD /P:350

Parameters

/P:hhhh - Selects the I/O address of the SCSI controller (0320h, 0330h or 0340h)

/DM - Enables DASD Manager Support for all drives via OS2DASD.SYS (default).

/!DM - Disables DASD Manager Support for all drives.

/DM:d - Enables DASD Manager Support for a specific drive(s) with the SCSI target ID "d" (d=0...6). More than one SCSI drives can be selected, i.e. /DM:2,5,6.

/!DM:d - Disables DASD Manager Support for a specific drive(s) with the SCSI target ID "d" (d=0...6). More than one SCSI drives can be selected, i.e. /DM:2,5,6.

/SM - Enables DASD Manager Support for all devices via OS2DASD.SYS (default).

/!SM - Disables DASD Manager Support for all devices.

/SM:d - Enables DASD Manager Support for a specific device with the SCSI target ID "d" (d=0...6).

/!SM:d - Disables DASD Manager Support for a specific device(s) with the SCSI target ID "d" (d=0...6).

/DEV0:x - Starts the target search at the device with the SCSI target "x" (d=0...6).

/T:d - Treats the MO drive with the SCSI ID "d" as if it were a harddisk.

/!D:d - Do not allow the SCSI disconnect command with the SCSI ID(s) "d".

/SL - Use a slower SCSI transfer speed.

/SL:d - Use a slower SCSI transfer speed for a specific device with the SCSI target ID "d" (d=0...6).

/Q - Disables the display of the SCSI response strings.