EIDE2300.ADD

EIDE 2300PLUS VL-Bus disk controller driver. Adapter Driver for ST506/IDE DASD.

Syntax

BASEDEV=EIDE2300.ADD /A:0 /U:0 /DMASPEED:7 /U:1 /PIOSPEED:5

Parameters

/A:

Adapter number

/U:

Drive number

/PIOSPEED:

Set the drive PIO speed. The PIO speed of drive is from 0 to 8 or A.

/DMASPEED:

Set the drive DMA speed. The DMA speed of drive is from 0 to 8. If the drive does not have this feature, the switch will be ignored and the driver will automatically detect and set the speed of drive.

Remarks

NOTES: Only one speed mode can be specified per drive.

Do not set a speed setting for the driver higher than the speed setting that the EIDE2300.EXE Install utility reported for your drive(s).

The driver will automatically detect and set the speed of drive if user doesn't specify it.

Links

• EIDE_2300P_8-162.zip - 8.162 (1995-08-10)