Jump to content

CDD110.ADD

From EDM2
Revision as of 03:44, 28 February 2020 by Martini (talk | contribs) (Created page with "Orchid CDS-3110, Wearnes CDD110 CD-ROM device driver. BASEDEV=CDD110.ADD /P:nnn /AT ==Parameters== '''/P:nnn''' :is the base I/O port address selected on the CD-ROM host ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Orchid CDS-3110, Wearnes CDD110 CD-ROM device driver.

BASEDEV=CDD110.ADD  /P:nnn /AT

Parameters

/P:nnn

is the base I/O port address selected on the CD-ROM host interface card. The default base I/O port address for the Wearnes interface card is 340h, so the statement would appear as follows if the card is set to address 340h:
BASEDEV=CDD110.ADD  /P:340
/AT
If your CD-ROM drive is attached to an audio card, (i.e. the Orchid SoundWave 32), you must add the /AT parameter switch which is described in the "Wearnes Device Driver Parameters" section below.