Jump to content

Using Your DDK

From EDM2
Revision as of 21:54, 6 December 2017 by Ak120 (talk | contribs)

Reprint Courtesy of International Business Machines Corporation, © International Business Machines Corporation

Joystick Virtual Device Driver and Applications

Driver Description
The IBM PC game port adapter provides a simple interface to joysticks and other similar analog devices. This component includes the OS/2 device driver source code for the PDD/VDD pair and OS/2 source code for the JOYTUNE and JOYTEST applications.
Compilers/assemblers Required
  • Microsoft Assembler 5.0
  • IBM C Set ++ V2.01
Build Instructions
  1. Set the environment variables so the correct tools are picked up during the build.
    e.g., SET PATH=<drive>:\DDK\TOOLS;%PATH%
    Where <drive> represents your DDK installed drive and DDK represents the DDK installed directory. On the CD-ROM, the TOOLS directory path is DDK\ TOOLS.
  2. Before the FIRST build is attempted, run (only once) the COPYCSET.CMD REXX command file in the DDK\TOOLS directory. This command copies the set of needed files from your copy of the IBM C Set ++ V2.01 compiler to the proper directories under the DDK base directory.
    e.g., COPYCSET <IBMCdrive>:\'IBMC' <drive>:\DDK
    Where <IBMCdrive> represents the IBM C Set ++ V2.01 installed drive and 'IBMC' represents the IBM C Set ++ V2.01 installed directory, <drive> represents your DDK installed drive and DDK represents the DDK installed directory.
  3. Change the directory to \DDK\BASE\SRC\VDEV\MME\VJOY.
  4. Invoke NMAKE on the resident makefile.
  5. Invoke NMAKE DEBUG to build the debug version.
Files Created By Successful Build
Directory: \DDK\BASE\SRC\VDEV\MME\VJOY
Retail Version:
  • GAMEVDD.SYS
  • JOYTEST.EXE
  • JOYTUNE.EXE
Debug Version:
  • DGAMEVDD.SYS

Joystick Physical Device Driver

Driver Description
The IBM PC game port adapter provides a simple interface to joysticks and other similar analog devices. This component includes the OS/2 device driver source code for the PDD/VDD pair and OS/2 source code for the JOYTUNE and JOYTEST applications.
Compilers/assemblers Required
  • Microsoft Assembler 5.0
  • Microsoft C 6.0
Build Instructions
  1. Set the environment variables so the correct tools are picked up during the build.
    e.g., SET PATH=<drive>:\DDK\TOOLS;%PATH%
    Where <drive> represents your DDK installed drive and DDK represents the DDK installed directory. On the CD-ROM, the TOOLS directory path is DDK\ TOOLS.
  2. Before the FIRST build is attempted, run (only once) the COPYC60.CMD REXX command file in the DDK\TOOLS directory. This command copies the set of needed files from your copy of the Microsoft C 6.0 compiler to the proper directories under the DDK base directory.
    e.g., COPYC60 <MSCdrive>:\'C600' <drive>:\DDK
    Where <MSCdrive> represents the Microsoft C installed drive and 'C600' represents the Microsoft C installed directory, <drive> represents your DDK installed drive and DDK represents the DDK installed directory.
  3. Change the directory to DDK\BASE\SRC\DEV\MME\JOY.
  4. Invoke NMAKE on the resident makefile.
  5. Invoke NMAKE DEBUG to build the debug version.
Files Created By Successful Build
Directory: \DDK\BASE\SRC\DEV\MME\JOY
Retail Version:
  • GAMEDD.SYS
Debug Version:
  • DGAMEDD.SYS

USB Device Driver Sample

Driver Description
The Universal Serial Bus (USB) device driver sample contains source code for USB device drivers and installation protocols. The code includes the base USB device driver stack and the following drivers:
  • Keyboard
  • Mouse
  • Modem
  • Digital audio
Compilers/Assemblers Required
  • Microsoft MASM 5.1 (supplied with the DDK)
  • Microsoft C 6.0
Build Instructions
  1. Set the environment variables so the correct tools are picked up during the build.
    e.g., SET PATH=<drive>:\DDK\TOOLS;%PATH%
    Where <drive> represents your DDK installed drive and DDK represents the DDK installed directory. On the CD-ROM, the TOOLS directory path is \DDK\TOOLS.
  2. Before the FIRST build is attempted, run (only once) the COPYC60.CMD REXX command file in the \DDK\TOOLS directory. This command copies the set of needed files from your copy of the Microsoft C 6.0 compiler to the proper directories under the DDK base directory.
    e.g., COPYC60 <MSCdrive>:\'MSC60' <drive>:\DDK
    Where <MSCdrive> represents the Microsoft C installed drive and "MSC60" represents the Microsoft C installed directory, <drive> represents your DDK installed drive and DDK represents the DDK installed directory.
  3. To ensure the device driver gets created properly on a FAT file system, type SET LANG=US at an OS/2 command prompt before invoking NMAKE.

To build all the USB device drivers:

  1. Change the directory to \DDK\BASE\SRC\DEV\USB.
  2. Invoke NMAKE on the resident makefile.

To build an individual USB device driver:

  1. Change the directory to \DDK\BASE\SRC\DEV\MOUSE\USB.
  2. Change to the directory of the desired USB device driver.
  3. Invoke NMAKE on the resident makefile.
Files Created by Successful Build
Directory: \DDK\BASE\SRC\DEV\USB\USBD
  • USBD.SYS
Directory: \DDK\BASE\SRC\DEV\USB\UHCI
  • USBUHCD.SYS
  • USBUHCD2.SYS
Directory: \DDK\BASE\SRC\DEV\USB\HID
  • USBHID.SYS
Directory: \DDK\BASE\SRC\DEV\USB\USBMOUSE
  • USBMOUSE.SYS
Directory: \DDK\BASE\SRC\DEV\USB\USBKBD
  • USBKBD.SYS
Directory: \DDK\BASE\SRC\DEV\USB\USBAUDIO
  • USBAUDIO.SYS
Directory: \DDK\BASE\SRC\DEV\USB\USBCOM
  • USBCOM.SYS
Retrieved from "https://www.edm2.com/index.php?title=Using_Your_DDK&oldid=52859"