Jump to content

QUICKCAM.SYS

From EDM2
Revision as of 13:42, 27 November 2016 by Ak120 (talk | contribs) (Created page with "Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro '''NOTE:''' It is recommended that you set your parallel port to either ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro

NOTE: It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bi-directional modes, respectively. Bi-directional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used. Available at: http://www.cix.co.uk/~elad/qv2.htm 

DEVICE=QUICKCAM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes
Retrieved from "https://www.edm2.com/index.php?title=QUICKCAM.SYS&oldid=37441"