Jump to content

CONFIG.SYS - DEVICE Statements

From EDM2
Revision as of 22:05, 26 November 2016 by Ak120 (talk | contribs) (DRVOQ117.SYS)

Return to The Config.sys Documentation Project Main Page

Device Drivers are needed by OS/2 to work with your installed hardware.

The Device Drivers are loaded after the Base Device Drivers. Unlike them the Device Drivers are loaded in the order they appear in the CONFIG.SYS file.

The following pages describe these entries:

Chipset Support

PC Card/CardBus

Power Management

Network Adapters

NDIS MAC

Ethernet
Infrared
Token-Ring
VG AnyLAN
Wireless

NDIS Protocols

ODI

Input Devices

Pointer Devices

Multimedia Devices

Audio Adapter

Misc

ADSMSDIS.SYS

Personally Safe'n'Sound tape backup driver that from Warp Server for e-Business

DEVICE=ADSMSDIS.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ADSMTAPE.SYS

Personally Safe'n'Sound tape backup driver that from Warp Server for e-Business.

DEVICE=ADSMTAPE.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No No Yes

AFINETK.SYS

32-bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak 13 for Warp 4 Part of the TCP/IP Ver. 4.x firewall

DEVICE=\MPTN\PROTOCOL\AFINETK.SYS

Parameter:

  • /V

Verbose, shows version-number

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No FP13 Yes

AFOS2.SYS

Part of the TCP/IP Protocol Drivers

DEVICE=\MPTN\PROTOCOL\Afos2.sys 
Parameter
/V - Verbose, shows version-number
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

VDD

Multimedia

ASP4CORE.SYS

Vortex AU8820 Core OS/2 driver.

DEVICE=ASP4CORE.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASP4JOY.SYS

Vortex AU8820 OS/2 Joystick driver

DEVICE=ASP4JOY.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASP4OS2.SYS

Vortex AU8820 OS/2 MMPM/2 driver

DEVICE=ASP4OS2.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASP4VDD.SYS

Vortex AU8820 Virtual DOS driver

DEVICE=ASP4VDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASPI

ASPIDRV.SYS

ASPI Driver supplied by Solution Technology Inc. (STI)

DEVICE=ASPIDRV.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASPIPFA.SYS

Device driver used to distinguish between IDE drives and SCSI drives when using Hard Disk Drive Monitor.

The Hard Disk Drive Monitor monitors the status of SMART-compatible harddisk drives in your computer. available as ftp://ftp.pc.ibm.com/pub/pccbbs/commercial_desktop/zp1t06a.exe

DEVICE=ASPIPFA.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASPIROUT.SYS

The interface of ASPI Router merely is an extension of the interface of OS2ASPI.DMD needed e.g. by the free CDRecord/2 from Chris Wohlgemuth available at: http://www.geocities.com/SiliconValley/Sector/5785/ and SANE (Scanner Access Now Easy) from Yuri Dario available at http://www.geocities.com/SiliconValley/Peaks/4320.

DEVICE=ASPIROUT.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

ASPITAPE.SYS

GTAK Driver for SCSI tape access by GTAR scsitape.dmd and scsitape.sys also belong to the package by Andreas Kaiser: gtak258.zip gtar258.zip.

DEVICE=ASPITAPE.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

Display Adapter

ATI0.SYS

Used by ATI 3D Rage graphic adapter cards.

DEVICE=\OS2\ATI0.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ATIM64.SYS

Used by ATI 3D Rage graphic adapter cards.

DEVICE=\OS2\ATIM64.SYS 
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

BUSAUDIO.SYS

C-Media CMI 8330 Soundcard driver (AD 8329 Chip).

DEVICE=BUSAUDIO.SYS

Parameters:

  • /D:n - DMA channel, n=0,1 or 3
  • /I:n - Interrupt, n=5,7,9,10,11 or 12
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CCSINIT.SYS

ChipChat Sound Initializer - only needed with Warp 4

DEVICE=CCSINIT.SYS

The ChipChat is one of the rare available Soundcards for the microchannel, it is based on the ESS1688. For more information see: http://www.ChipChat.com

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CD1400.SYS

RISC COM CD1400 Device driver by DECISION-COMPUTER INTERNATIONAL Co.,LTD

DEVICE=CD1400.SYS

Parameter:

  • /Mxxxx

card memory address

  • /Ixx

IRQ Nø

  • /Cxx

Assign the port number of the first port on the card ( COM1 to COM96 )

NOTE: The driver will autodetect the number of communication ports on the card ( 4 or 8 ports ).

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CDBASPI.SYS

CD-TEK driver to access easily the PIONEER DRM-1804X autochange CD-ROM device.

DEVICE=CDBASPI.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CLICHOS2.SYS

Crystal Semiconductor CS4299 AC97 Audio Driver (to be found e.g. on IBM T23 Thinkpad) This chip doesn't support Midi, you need Timidity to geht Midi working.

DEVICE=CLICHOS2.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CMPCI32.SYS

C-Media CMI8738 OS/2 Audio Driver

DEVICE=CMPCI32.SYS

Parameter:

  • /V:

verbose (prints copyrights during driver init)

  • /D:

print start and end address of code (useful to locate the code that causes a trap (CS:EIP in trapscreen))

  • /R:

use linein jack to output rear channels

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

COM.SYS

This driver is required for serial communications.

DEVICE=C:\OS2\Boot\COM.SYS <parameters>

TIP: below. This line MUST appear after any driver that uses a communications port. Older versions of COM.SYS are limited to 57600 Baud, newer ones (e.g. delivered with Warp 4) are able to do 115200 Baud. Beginning with build 10.042 PCI Add-On cards with implemented software interrupt sharing are supported too, beginning with build 10.052 there are 16 com ports available and beginning with build 10.068 Combo Cards are supported.

TIP: There are two very good replacement drivers called SIO.SYS\VSIO.SYS.

TIP: To add support for COM3 and COM4 at location 3E8 with IRQ 4 and 2E8 with IRQ 3 respectively, add (3,3E8,4) (4,2E8,3) to the DEVICE line, e.g.

DEVICE=drive:\OS2\COM.SYS (3,3E8,4) (4,2E8,3)

You can also use this method to change a COM ports assigned IRQ. The normal address for COM1 is 3F8 and IRQ 4, for COM2 2F8 and IRQ3.

TIP: With ThinkPads should the address be added. e.g:

DEVICE=drive:\OS2\BOOT\COM.SYS (1,3F8,4) (2,2F8,3)

Parameter:

  • /V - Verbose (since 10.052)
  • /W - Wait verbose mode (since 10.052). Displaying pauses with a "Press Enter to continue..." message.
  • /F - Find COM ports on PCI combo (serial/parallel) cards automatically (since 10.068).
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

COM02.SYS

For IBM PS/2 model 90 & 95 only. Lets you use the communications ports COM1 and COM2. See DEVICE COM.SYS.

DEVICE=COM02.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CWGUTIL.SYS

Crystal DSP manager utility device driver.

DEVICE=CWGUTIL.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CWMPU401.SYS

Crystal MPU401 driver for a complete discription see MPU401.SYS.

DEVICE=CWMPU401.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CWVAUDIO.SYS

Virtual DOS driver for Crystal Soundcards

DEVICE=\MMOS2\CWVAUDIO.SYS BSAUD1$

Parameter:

  • /S

The CWVAUDIO.SYS driver will automatically set a 'BLASTER' DOS environment variable to the proper audio hardware settings. This is done by adding a '@SET BLASTER=' line to the beginning of all DOS session's autoexec file. This file is specified in DOS session's DOS_AUTOEXEC property. The /S option for CWVAUDIO.SYS will skip the automatic setting of this environment variable.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CWVOPL3.SYS

Crystal Midi FM Virtual Dos Driver.

DEVICE=CWVOPL3.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CWWINPDD.SYS

Crystal WinOS2 Audio PDD.

DEVICE=CWWINPDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

CWWINVDD.SYS

Crystal VDD supporting WinOS2 audio DRV.

DEVICE=CWWINVDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

DCF2CDE.SYS

This driver is used by the DCF/2 disk compression program.

DEVICE=\DCF2\DCF2CDE.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

DCF2PDD.SYS

This driver is used by the DCF/2 disk compression program.

DEVICE=C:\Dcf2\DCF2PDD.SYS <parameter>
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

DCF2MGR.SYS

This driver is used by the DCF/2 disk compression program.

DEVICE=C:\Dcf2\DCF2MGR.SYS <parameter>
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

DISKFIT.SYS

Driver for the fault tolerance system. See OS/2 manual for more information.

DEVICE=DISKFIT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes Yes Yes

DOS.SYS

Is needed if you want to run DOS or Windows applications.

DEVICE=C:\OS2\BOOT\DOS.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes


DP83815.OS2

National Semiconductor DP83815 10/100 MacPhyter3v PCI Adapter.

DEVICE=DP83815.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

DPROM01.SYS

This driver was found on XTEL software configurations (version 5.6 (MINI X-TEL) and 6.0). This driver is for PLC usage.

Examples:

DEVICE=X:\XPROSYS\EXE\DPROM01.SYS MAXSPEED=9600

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

DRVOCDB.SYS

Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0.

DEVICE=DRVOCDB.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

DRVOPPQT.SYS

Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0.

DEVICE=DRVOPPQT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EQNKRCSH.EXE

Driver by Netfinity* Version 5.20.3.

DEVICE=EQNKRCSH.EXE
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EQNKVKBD.SYS

Driver by Netfinity* Version 5.20.3.

DEVICE=EQNKVKBD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EQNRCSH.EXE

Part of DCAF (Distributed Console Access Facility).

DEVICE=EQNRCSH.EXE

ATTENTION: If you don't have the IBM Internal Y2K fix it won't work after 31.12.1999.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EQNVKBD.SYS

Part of DCAF (Distributed Console Access Facility).

DEVICE=EQNVKBD.SYS

ATTENTION: See also DEVICE EQNRCSH.EXE

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ES1688DD.SYS

Sounddriver for the ESS1688. A FREE mixer for this Soundchip is ESSMIX13.ZIP by Oleg Deribas (older@iname.com).

DEVICE=ES1688DD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ES1868DD.SYS

Sounddriver for the ESS1868pnp (many soundcards). A FREE Mixer for this soundcard is MINIMIX2.ZIP by Marco G. Salvagno (mgs@whiz.cjb.net) http://whiz.cjb.net.

DEVICE=ES1868DD.SYS

Platform Support:

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ES1869DD.SYS

Driver for the ESS 1869 soundchip.

DEVICE=ES1869DD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ES198X.SYS

ESS Allegro-1/Maestro-3 PCI Audio Device Driver.

DEVICE=ES198X.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ESP.SYS

Ray Gwinn's Hayes ESP device driver.

DEVICE=ESP.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ET32ND.OS2

KTI Networks Inc. base 10 t/tx PCI combo ethernet card.

DEVICE=ET32ND.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ET32ND.SYS

Driver for KTI Networks System ethernet card.

DEVICE=ET32ND.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ETHPCI.OS2

Acton EN1207 Ethernet Card.

DEVICE=ETHPCI.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EXCPHEAD.SYS

New with eCS 1.1. This works around a condition in DOSCALL1 when the exception handlers have not yet been initialized during boot, and a failing driver causes a trap. EXCPHEAD.SYS should be loaded before other DEVICE= or IFS= lines in CONFIG.SYS to properly terminate the chain of exception handlers for DOSCALL1.

This may not be necessary for the 14.104a kernel or above.

DEVICE=EXCPHEAD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
eCS

EXMOUSE2.SYS

Kensington mouse driver for OS/2.

DEVICE=EXMOUSE2.SYS

NOTE: Doesn't work together with the Scitech Display driver

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EXP16.OS2

Intel EtherExpress 16 Family Adapter Network driver.

DEVICE=EXP16.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

EXTDSKDD.SYS

EXTDSKDD.SYS supports external disk drives. See your online Command Reference for complete details.

DEVICE=EXTDSKDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

FETND.OS2

PCI Fast Ethernet 10M/100M Adapter. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/via.zip.

DEVICE=FETND.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

FIREBIRD.SYS

Enables the programming of the Gravis Firebird and Thunderbird Joysticks under DOS.

DEVICE=FIREBIRD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

FIOAUXDD.SYS

Device Driver file that contains the device driver that supports mouse port (auxiliary) attachment of both the 4777 Magnetic Stripe Unit and 4778 PIN-Pad Magnetic Stripe Reader. [1]

DEVICE=FIOAUXDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Unknown Unknown Unknown

FIOSERDD.SYS

Device Driver for serial attached 4777 Magnetic Stripe Unit or 4778 PIN-Pad Magnetic Stripe Reader. ftp://public.dhe.ibm.com/4700/fiodd/docs/77os2prg.pdf]

DEVICE=FIOSERDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Unknown Unknown Unknown

FLSH2MTD.SYS

PCMCIA Storage Driver for OS/2 (FLASH MTD).

DEVICE=FLSH2MTD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

FMD.SYS

Driver required by Faxworks lite 2.* in Warp 3 or the Pro Versions of Faxworks/PMFax.

DEVICE=FMD.SYS

Parameter:

  • L = disable logo on error free boot
  • T = do port tests (default)
  • N = no port tests, assume ports exist (PCMCIA default)
  • S = allow interrupt sharing (MCA bus only)
  • A = get ABIOS LID on port open (MCA bus only)
  • c = COM number (1-48)
  • h = I/O port address (in hex)
  • i = interrupt number

(defaults are for the standard COM ports)

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

FWIP.SYS

Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IP packet filtering to the Firewall.

DEVICE=C:\Mptn\Potocol\Fwip.sys 

IP Packet Filter Driver. This component of the VPN security system manages the firewall packet fileter and address translation service. Part of the TCP/IP Ver. 4.1/4.2/4.21 firewall

For configuring the Firewall get the FREE ServerConfig Which can be found at: http://www.ecs.soton.ac.uk/~dm898/soft.html a GUI config util for Apache 1.3.9, InetPowerServer/2 0.85 and the IBM OS/2 TCP/IP Firewall. Author: SEHH (sehh@altered.com)

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

FXWRAP.SYS

NDIS wrapper for the InJoy Firewall for OS/2 from: http://www.fx.dk/firewall

DEVICE=FXWRAP.SYS

Designed with Cable Modems and LAN-2-LAN connections in mind, the InJoy Firewall is a complete Internet Gateway, Firewall and IPSec VPN gateway/client in one. FEATURES: IPSec; PPPoE; Superior performance NDIS Protocol Engine; RFC 1631-NAT support; Direct Internet Access for your LAN PC's; Packet Filtering; Traffic Accounting, Port Redirection; Rule Based Access Control; Identd support; No reconfiguration of software; Great step-by-step docs; YK2; PM & text GUI; DHCP support; On-the-fly updates.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

GAMEDD.SYS

It is used by many Soundcards. It gives support for the Joystick connector for OS/2 programs.

DEVICE=\MMOS2\GAMEDD.SYS

The following joysticks are supported by this driver:

  • Advance Gravis Analog Joystick
  • Advance Gravis GamePad
  • Advance Gravis Analog Pro
  • CH Products Flightstick
  • Dexxa Joystick ( Infrared )
  • Kraft Thunderstick
  • Logitech WingMan Extreme
  • Logitech Wingman
  • Thrustmaster XL Action Controller

There is also an Enhanced Joystick driver by Vesa Jääskeläinen who supports the following joysticks:

  • Generic 4 axis and 4 button joystick
  • Gravis GamePad Pro (in GrIP mode)
  • CH FlightStick Pro
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

GAMEPRT2.SYS

Joystick interface driver. By Jose DaSilva silva@dowco.com.

DEVICE=GAMEPRT2.SYS <parameter>

Parameter:

  • /VB - displays the gameport header at startup.
  • /P:hhhh - Is the joystick port (hhhh=hex address of port)
  • /W:hhhh - Is the wait run-a-way counter (hhhh=waiting time).

NOTE: This driver is incompatible with the original IBM GAMEDD.SYS. You must use GAMEDD.SYS from the same author.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

GAMEVDD.SYS

It is used by many Soundcards. It gives support for the Joystick connector for DOS and Windows programs.

DEVICE=\MMOS2\GAMEVDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

GPH2USB.SYS

USB driver for GPhoto2

DEVICE=GPH2USB.SYS

NOTE: With this driver installed accessing your camera using the USBMSD.ADD or CWUSBMSD.ADD drivers doesn't work.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

GRADD.SYS

Graphic card driver.

DEVICE=C:\OS2\Boot\GRADD.SYS 
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

GRAHPIRE.SYS

WACOM Graphire Tablet device dependant OS/2 driver (serial model). It supports both Graphire Pen & Mouse and emulates usual 3-button serial mouse.

DEVICE=GRAHPIRE.SYS <parameters>

Parameter:

  • SERIAL=COMn

Specifies the COM Port, COM1 is used by default

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

I2OLOSM.OS2

IBM I2O Token Ring LAN Driver

DEVICE=I2OLOSM.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBG_DATI.DRV

Sytos Plus driver for the IBM 2.0G 4mm Tape.

DEVICE=IBG_DATI.DRV
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBM360P.SYS

Pen for OS/2 Device Driver for IBM360P.

DEVICE=IBM360P.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBM730T.SYS

Pen for OS/2 Device Driver for IBM730T.

DEVICE=IBM730T.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBM750P.SYS

Pen for OS/2 Device Driver for IBM750P.

DEVICE=IBM750P.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBMCOMO.SYS

Device driver for the IBM Advanced System Mangement service processor hardware.

DEVICE=IBMCOMO.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBMSPO.SYS

Device driver for the IBM Advanced System Mangement service processor hardware.

DEVICE=IBMSPO.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBMTOK.OS2

Network adapter driver for IBM Token-Ring cards.

DEVICE=C:\IBMCOM\MACS\IBMTOK.OS2 
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

IBMTOKCS.OS2

IBM Turbo 16/4 Token-Ring PC Card.

DEVICE=IBMTOKCS.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ICHCSND.SYS

Analog Devices SoundMax Integrated Digital Audio AD188x/198x OS/2 driver for Intel 82801AA/AB/BA/CA/DB/EB and NVidia MCP2/CK8 chipsets.

DEVICE=ICHCSND.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
- Yes Yes Yes

ICHCVDD.SYS

AD18xx/19xx virtual DOS driver for Intel 82801AA/AB/BA/CA/DB/EB and NVidia MCP2/CK8 chipset.

DEVICE=ICHCVDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ICHSND.SYS

Analog Devices SoundMax Integrated Digital Audio AD18xx for Intel 82801AA/AB chipsets.

DEVICE=ICHSND.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ICHVDD.SYS

AD1881 virtual DOS driver for Intel 82801AA/AB chipset.

DEVICE=ICHVDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
- Yes Yes Yes

IRMAC.OS2

IBM Wireless LAN PCMCIA Adapter driver.

DEVICE=IRMAC.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

KBLS120.SYS

Kingbyte LS-120 ATAPI Disk Driver. http://www.kingbyte.com

DEVICE=KBLS120.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

KBPD.SYS

Kingbyte OS/2 Parallel PD ATAPI Disk Driver. http://www.kingbyte.com

DEVICE=KBPD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

KDBNET.SYS

Kernel Failure Network protocol, enables remote Kernel-Failure repair over TCP/IP.

DEVICE=KDBNET.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

KMGAX64.SYS

It is used by Matrox Graphics cards.

DEVICE=C:\Mga\Os2\KMGAX64.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

KTC110.OS2

Kingston EtheRX PCI Fast Ethernet Adapter. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.

DEVICE=KTC110.OS2
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

KTC111.OS2

Kingston Fast EtheRx KNE111TX PCI Fast Ethernet Adapter.

DEVICE=KTC111.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

KTC120.OS2

Kingston EtheRX PCI Fast Ethernet Adapter.

DEVICE=KTC120.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

KTC40.OS2

Kingston EtheRx PCI-Ethernet-Networkadapter driver. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.

DEVICE=KTC40.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

KURTAXGT.SYS

Pen for OS/2 Device Driver for Kurta.

DEVICE=KURTAXGT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

L100.OS2

PNIC 100 Base FX Fast Ethernet adapter. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.

DEVICE=L100.OS2

TIP: By Jan Swartling. To get this driver to work with a Netgaer FA 310TX edeit the L100.NIF as follows:

 [Media_Mode]
 display = "Serial connection type"
 type = string
 strlength = 14
 optional = yes
 set = TP_10,TP_10_FD,TP_100,TP_100_FD,AUTODETECT
 default = AUTODETECT
 help = "This parameter specifies the serial connection type used on the adapter.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANDD.SYS

LAN Manager's user device driver that provides services for MAC frame protocols.

DEVICE=LANDD.SYS

NOTE: By Jeff Summner: Looking at the driver, it supplies the driver names \dev\LANDD$ and requires another device, \dev\protman$ to work. In my experience, in OS/2 it is strictly used for SNA, be that Anynet (Netbios over SNA/APPN) or simple Mainframe connectivity. It is also used to configure Bridges and LAM/CAU equipment. It does allow for some pretty cool stuff, like simple Token Ring utilization figures (a la Ringutil, IBM EWS, useless at full duplex, though) and Token Ring Diags (last ring code, upstream neighbor, beaconing MAC, Ring Parameter Server reporting.)

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANDLLDD.OS2

LAN Manager interface to LAND.OS2 - the 802.2 protocol.

DEVICE=LANDLLDD.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANDLLDD.SYS

LAN Manager's common DLL device driver.

DEVICE=LANDLLDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANMSGDD.OS2

Writes a log named LANTRAG.LOG into drive:\IBMCOM. This file will contain any messages (such as errors) generated via LANMSGDD.OS2.

DEVICE=C:\IBMCOM\LANMSGDD.OS2 <parameter>

Parameters

  • /I:C:\IBMCOM /S

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANPDD.OS2

Part of MPTS. It enables the NetBIOS and the IEEE 802.2 Protocols to OS/2 Programs. It loads also support for the LAN Virtual Device Driver ( Lanvdd.os2 ).

DEVICE=C:\Ibmcom\Protocol\Lanpdd.OS2
DEVICE=\IBMCOM\LANMSGDD.OS2 /I:drive:\IBMCOM /S

Writes a log named LANTRAG.LOG into drive:\IBMCOM. This file will contain any messages (such as errors) generated via LANMSGDD.OS2.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANPDD.SYS

LAN Manager's kernel device driver.

DEVICE=LANPDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANVDD.OS2

Part of MPTS. It is the LAN Virtual Device Driver. It enables the NetBIOS and the IEEE 802.2 Protocols to Dos and Windows Programs.

DEVICE=C:\Ibmcom\Protocol\LANVDD.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANVDD.SYS

DOS LAN Manager's virtual device driver.

DEVICE=LANVDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LANVMEM.SYS

LAN Virtual DOS Driver, needed when using an specific DOS to be started.

DEVICE=LANVMEM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LDCOPY.SYS

Simple OS/2 driver for copying files while CONFIG.SYS is being processed by Bob Eager.

DEVICE=LDCOPY.SYS

Parameter:

  • sourcefile destinationfile

Note: The driver can appear several times in the config.sys, thats not a fault. http://www.tavi.co.uk/os2pages/ldcopy.html

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LNE100.OS2

Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4). NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.

DEVICE=LNE100.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LPTDD.SYS

This driver allows a DOS session to print to an LPT port that has been redirected (or captured) to a network printer.

DEVICE=C:\OS2\Mdos\Lptdd.sys 

Parameter:

  • -T:ss

Specifying the timeout value on send/receive (default 10 seconds). If using slow media (diskette), or when LPTool is used on a very busy system, increase this for reliable operation.

  • -P:n

Specifying the LPT port-address to use (default is 1 for using 0378). Use LPTDD.CMD to define the correct n.

The FREE LPTool is developed by Jan van Wijk available at http://www.fsys.demon.nl

TIP: Together with e.g. the great FileCommander/2 by Brian Harvard create a user-menue entry that sends the current directory to the connected Computer for an easy use.

Example:

  S: Copy to Remote via parallel port
  D:\TOOLS\LPTOOL\LPTOOL send

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

LSL.SYS

This is the Link Support Layer driver. It is the lowest layer in the Novell Open Data Link Interface model and is required for the requester.

DEVICE=C:\Netware\Lsl.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes Yes Yes

LTMDMOS2.SYS

Lucent Technologies Modem Driver. An older V. 5.55 Beta 3 is available for FREE at http://www.drmartinus.de/notebook2/notebook.htm

DEVICE=LTMDMOS2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MACFH.OS2

Part OS/2 Virtual LAN Kernel.

DEVICE=MACFH.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MAESTR2E.SYS

AudioDrive Maestro-2E OS/2 Driver modified by Daniela Engert

DEVICE=MAESTR2E.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MD5.SYS

Used by the Firewall built into TCP/IP 4.1 and above. This driver adds MD5 encryption to the Firewall. Device driver used by the IBM TCP/IP Firewall to impliment MD5 encryption. Part of the TCP/IP Ver. 4.1/4.2/4.21 firewall. This is RSA's message digest algorithm used to provide authentication and integrity verification.

DEVICE=x:\MPTN\PROTOCOL\MD5.SYS 

There are several tools to configure the firewall:

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MEDIAOS2.SYS

MediaDrive OS/2 Device Driver. The MediaDrive is an internal PC Card drive for Workstations. Useful e.g. for Digital-Cameras. Available at http://www.altec-computersysteme.com

DEVICE=MEDIAOS2.SYS

Parameter:

  • /V - Verbose
  • /B:XXX - Basisadress at XXX e.g. 170

Limitations:

The driver can only read/write FAT formatted ATA & SRAM PC Cards. With OS/2 only the lower slot can be used. Must be the only drive attached to the IDE-Controller.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MEIO0437.SYS

Driver for the MWAVE Modem for IBM Thinkpads.

DEVICE=MEIO0437.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MEMMAN.OS2

LAN Manager's memory manager for DOS/Windows mode operation. Left over from old code to provide compatibility. Not needed for normal operations.

DEVICE=MEMMAN.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MIDI.SYS

RTMIDI helper driver. Is used by your Soundcard, but RTMIDI will work only if your Soundcard supports RTMIDI with the audio driver.

DEVICE=C:\OS2\Boot\Midi.sys 

TIP: For working with Midi there is the MIDI Station Sequencer: http://www.dinosoft.it/~midistation/index.html

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No Yes Yes

MONMOU01.SYS

Serial Touchscreen Controller on PC-Bus System

DEVICE=MONMOU01.SYS <parameter>

Parameter: where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller.

matches the jumper settings on the controller.

matches the interrupt jumper on the controller.

NOTE: Disabling the COM Drivers If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.

NOTE: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No Yes Yes

MONMOU02.SYS

Serial Touchscreen Controller on PS/2 System

DEVICE=MONMOU02.SYS <parameter>

Parameter: where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller.

matches the jumper settings on the controller.

matches the interrupt jumper on the controller.

NOTE: Disabling the COM Drivers If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.

NOTE: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No Yes Yes

MONMOU03.SYS

PC-Bus and MicroChannel Touchscreen Controller

DEVICE=MONMOU03.SYS <parameter>

Parameter: where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller.

matches the jumper settings on the controller.

matches the interrupt jumper on the controller.

NOTE: Disabling the COM Drivers If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.

NOTE: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No Yes Yes

MOUSE2.SYS

Driver for the Trackpoint of IBM Thinkpads

DEVICE=MOUSE2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MWAVEDD.SYS

Driver for MWAVE Modem on IBM Thinkpads.

DEVICE=MWAVEDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

MWAVEVDD.SYS

Dos Driver for the MWAVE-DSP in Thinkpads.

DEVICE=MWAVEVDD.SYS

ATTENTION: The MWAVEVDD.SYS must placed before VEMM.SYS.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NE2000.OS2

Eagle Technology NE2000plus Ethernet Adapter.

DEVICE=NE2000.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NETBEUI.OS2

This is the NetBIOS protocol driver.

DEVICE=C:\Ibmcom\Protocol\NETBEUI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NETBIOS.OS2

This is the NetBIOS API driver.

DEVICE=C:\Ibmcom\Protocol\NETBIOS.OS2

TIP: By Roland Sambain. The conventions wisdom about IFS statements coming at the beginning of config.sys seems not to apply. i.e. for netbios to load correctly the device statement must comes before the NETWKSTA.200 IFS.

Netbios and Gigsabit adapters

Due to the Nature of NetBIOS, it has some limitations to work on Gigabit adapters with requires some adjustments to MPTS settings.

Explanation: NetBIOS can not work with large Ethernet frame sizes which are used by default with Gigabit Ethernet adapters. Both transfer and receive buffer sizes should be set to 1024 bytes and USEMAXDATAGRAM set to "NO". The DIX 2.0 protocol type (ETHERAND_TYPE) should be set to "D".

Procedure to change settings

  1. From MPTS select 'Configure'
  2. In 'Current Configuration' find the "IBM 1000BaseT Gigabit Ethernet Adapter" and press 'Edit'
  3. Set 'Receive Buffer Size' = 1024
  4. Set 'Transmit Buffer Size' = 1024
  5. Select OK
  6. In 'Current Configuration' find the "IBM OS/2 NETBIOS" and press 'Edit'
  7. Set 'Type of Ethernet driver support = "D"
  8. Set 'Full buffer datagrams' = "NO"
  9. Select OK
  10. Select 'Exit' MPTS.
  11. Reboot

The other possibility is to use "IBM OS/2 NETBIOS OVER TCP/IP". You might want to try this and compare the results to native NetBIOS.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NETBIOS.SYS

Loads support for the NETBIOS protocol.

DEVICE=NETBIOS.SYS

TIP: If you do not use NETBIOS applications, you can remove the NETBIOS driver from the config.sys and the NETBIOS section from the PROTOCOL.INI to remove some of the confusion this creates. You should also remove the virtual netbios drivers at the same time since these bind onto the NETBIOS driver and not the LM10 interface (which is why they appear after the NETWKSTA.SYS driver, so it can "eat" its resources first, then what is left over is assigned to NETBIOS.SYS). [<- Note: this should be NETBIOS.OS2] (The mentioned virtual NETBIOS drivers are \IBMCOM\PROTOCOL\LANPDD.OS2 and LANVDD.OS2)

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NETFLX3.OS2

OS/2 NDIS 2 Driver for Compaq NetFlex-3/Netelligent Controllers.

DEVICE=NETFLX3.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NGUEST2.SYS

NetOp driver. NetOp is a family of remote contral products which support multiple operating systems and various communication interfaces.

DEVICE=NGUEST2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NHOST2.SYS

NetOp driver. NetOp is a family of remote contral products which support multiple operating systems and various communication interfaces.

DEVICE=NHOST2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NHOST2W.SYS

NetOp driver. NetOp is a family of remote contral products which support multiple operating systems and various communication interfaces.

DEVICE=NHOST2W.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NMPIPE.SYS

This driver provides Named Pipes support on the Netware client.

DEVICE=C:\Netware\NMPIPE.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NOVAQOS2.SYS

Driver for backup-software from NOVABACK.

DEVICE=NOVAQOS2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NOVASPI.SYS

Driver for backup-software from NOVABACK.

  DEVICE=NOVASPI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NPSERVER.SYS

This driver allows your workstation to function as a Named Pipes Netware server.

DEVICE=\Netware\NPSERVER.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NSIR.SYS

Part of the Infrared driver for IBM PC300PL computer.

DEVICE=\OS2\DLL\NSIR.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

NTRACE.OS2

Goldencode Network Trace (http://www.goldencode.com).

DEVICE=NTRACE.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NVC.SYS

This is a "Smart Behavior Blocker for DOS" from Norman antivirus. Basically a shield running in dos-boxes and similar to protect from possible virus "sneak attacks".

DEVICE=NVC.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

NWREQ.SYS

This is the main Netware requester module and must appear in config.sys after the NmPipe.sys , Ipx.sys and Spx.sys drivers.

DEVICE=\Netware\Nwreq.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ODI2NDI.SYS

This driver allows the Netware client to use MPTS as the interface to a network adapter driver and in turn, the LAN.

DEVICE=\Netware\Odi2Ndi.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

OPL3.SYS

Is used by soundcards with an OPL3 sound chip.

DEVICE=C:\Os2\Boot\Opl3.sys 

Parameter:

  • /P:nnn

Base I/O: Sets the base I/O address for FM device. Is almost always, 388 (nnn is in hex)

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

OPL3SA.SYS

It is used by Soundcards with Yamaha SAx sound chips.

DEVICE=C:\Mmos2\Opl3sa.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

OPL3VDD.SYS

It is used by Soundcards with Yamaha SAx sound chips. It provides support for DOS sessions.

DEVICE=C:\Mmos2\OPL3VDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

OPL4D.SYS

Yahama FM Sythesis OPL4 MIDI Driver

DEVICE=OPL4D.SYS

Parameter:

  • /P:xxx

Midiport Address, 300, 310, 330 or 388 (default)

  • /N:OPL41$

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

OS2EASY.SYS

Altec EASY DRIVE. http://www.altec-computersysteme.com

DEVICE=OS2EASY.SYS <parameter>

Parameter:

  • /V

Set Verbose Mode on

  • /B:XXX

Set Base Adress to XXX e.g. 170

NOTE: Currently only one slot supported, the standard format command is unsupported, no API to get direct access to the memory media.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

P9100.SYS

Is used by display adapters with a Weitek P9100 chipset

DEVICE=\OS2\BOOT\P9100.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PARADISE.SYS

Driver for the Paradise mixer for all Crystal CS423x soundcards using a mode-3 driver.

DEVICE=PARADISE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PAUSE.SYS

DEVICE=PAUSE.SYS

Parameter:

  • /W:NNN

Where: NNN = seconds to wait (default = 30 seconds)

Pauses the config.sys for a given time. Useful for maintenance purposes. The driver can be found at the IBM Device Driver Pak Online site.

TIP: Together with BASEDEV=IBM1S506.ADD the /W parameter does the same.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PC.SYS

Driver from Process Commander by Stardock.

DEVICE=PC.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCCOM2.SYS

PCCOM 2 PORT Card Device driver.

DEVICE=PCCOM2.SYS

Parameter:

  • /Axxx,yyy

card I/O address; port1=xxx, port2=yyy

  • /Imm,nn

IRQ Nø; IRQ1=mm, IRQ2=nn

  • /Cxx

Assign the port number of the first port on the card ( COM1 to COM98 )

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes


PCCOM4.SYS

PCCOM 4 PORT Card Device driver.

DEVICE=PCCOM4.SYS <parameter>

Parameter: /Axxx : card address

/Ixx : IRQ Nø

/D : compatible mode: COM1 and COM2 ( same as PC COM ). Use COM.SYS ( from IBM) for these 2 ports and PCCOM4.SYS for other ports. This option must be put to the front of all other options.

/Cxx : Assign the port number of the first port on the card ( COM1 to COM96 )

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCCOM8.SYS

PCCOM 8 PORT Card Device driver.

DEVICE=PCCOM8.SYS

Parameter:

  • /Axxx,xxx

Address of the card, following of vector address( without any space ! )

  • /Ixx

IRQ Nø

  • /Cxx

Assign the port number of the first port on the card ( COM1 to COM92 )

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCIND.OS2

NDIS driver for RealTek RTL-8029 based NE2000-combatible cards.

DEVICE=PCIND.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCKBD.SYS

Process Commander Keyboard driver. The PCKBD line lets full-screen Process Commander be invoked, even when the customized KBDBASE.SYS is not being used.

DEVICE=PCKBD.SYS <parameter>

Parameter:

  • KEYB:CA-A

For getting it to work with FP13 and up see: http://www.scoug.com/os24u/2001/scoug003.mrkia.html

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCLOGIC.SYS

Provides mouse support for Genius, Logitech, PC Mouse Systems.

DEVICE=PCLOGIC.SYS

ATTENTION: Must reside between POINTDD.SYS and MOUSE.SYS.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCM2FLSH.SYS

PCMCIA Storage Driver for OS/2 (FLASH).

DEVICE=PCM2FLSH.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PCM2SRAM.SYS

PCMCIA Storage Driver for OS/2 (SRAM).

DEVICE=PCM2SRAM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

PCMNICCS.OS2

IBM Ethernet Adapter (PCMCIA) driver.

DEVICE=PCMNICCS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
2.1 Yes Yes Yes

PCMSSDIF.SYS

PCMCIA Storage Driver for OS/2 (Interface).

DEVICE=PCMSSDIF.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
2.1 Yes Yes Yes

PCNTND.OS2

AMD PCNet Ethernet Family Adapter driver.

DEVICE=PCNTND.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PDITOU01.SYS

See DEVICE TOUCH.SYS.

DEVICE=PDITOU01.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PDITOU02.SYS

See DEVICE TOUCH.SYS.

DEVICE=PDITOU02.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PENCC.SYS

Pen for OS/2 Device Driver for CalComp 3300.

DEVICE=PENCC.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PENDD.SYS

Wacom IV and V Tablet driver by Masami Kitamura.

DEVICE=PENDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PMDD.SYS

Installs pointer draw device driver support.

DEVICE=\Os2\Boot\Pmdd.sys 

WARNING: OS/2 will not start without this line in your config.sys file.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PNPND.OS2

Device driver for the RTL8019 Ethernet card.

  DEVICE=PNPND.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

POINTDD.SYS

Provides mouse pointer draw support. Text modes 0, 1, 2, 3, and 7 and graphic modes D, E, F, and 10 are supported. For graphic modes other than D, E, F, and 10, the correct graphic device driver must also be installed.

DEVICE=\Os2\Boot\Pointdd.sys 

WARNING: In order for MOUSE.SYS to work effectively, this driver must be loaded by OS/2 before MOUSE.SYS. Do not remove it from your config.sys file.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PPPEMYWI.OS2

PPP over Ethernet Protocol driver included in ISDNPM 3.x.

 DEVICE=PPPEMYWI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PROTMAN.OS2

Network protocol-manager driver. IBM OS/2 LAN Protocol Manager, read PROTOCOL.INI in directory drive:\IBMCOM

DEVICE=C:\IBMCOM\PROTMAN.OS2 <parameter>

Parameters

  • /I:C:\IBMCOM

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PRTUTIL.SYS

Part of the Infrared driver for IBM PC300PL computer.

DEVICE=C:\OS2\DLL\PRTUTIL.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

PSCOM.SYS

This driver is required for serial communications on ACPI systems.

DEVICE=\OS2\Boot\PSCOM.SYS <parameters>

NOTE: This line MUST appear after any driver that uses a communications port, but before USB serial drivers (e.g., USBSER.SYS and/or USBCOM.SYS).

NOTE: See other notes related to COM.SYS.

TIP: To specify address and interrupt manually, use the syntax (port,address,IRQ), e.g.:

Set COM3 and COM4 at address 3E8 on IRQ 4 and 2E8 on IRQ 3:

  DEVICE=drive:\OS2\COM.SYS (3,3E8,4) (4,2E8,3)

Parameter:

  • /V - Verbose
  • /W - Wait verbose mode. Displaying pauses with a "Press Enter to continue..." message.
  • /F - Find COM ports on PCI combo (serial/parallel) cards automatically.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

PTDVR.SYS

Driver of Backmaster tape backup system.

DEVICE=PTDVR.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

QAP2DRVR.SYS

Driver for QAPlus/2, a PM program for testing system hardware: CDROM, ser/par ports, floppy drives, HD, keyboard, system board, memory, mouse... It can pinpoint failed SIMMs. Makes reports; everything. A bit dated now (1996), but still kinda useful. From DiagSoft, Inc., in Scott's Valley, CA, USA.

DEVICE=QAP2DRVR.SYS

Information by Wm D Loughman (wdlkhl@attglobal.net)

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

QCAMM.SYS

Driver for the Connectix Quickcam connected to parallel port. QCammdd01.zip is FREE for personal use.

DEVICE=QCAMM.SYS <parameter>

Parameter:

  • /CB=nnn - Camera Balance 1-254 (varies)
  • /CC=nnn - Camera Contrast,nnn=1-255,default 104
  • /CE=nnn - Camera Exposure,nnn=1-254,default 210
  • /CT=n - Camera Transfer,n=1,2,4, default 1
  • /FD=n - Frame Depth,n=4,6,default 6
  • /FH=nnn - Frame Height,nnn=1-240,default 240
  • /FL=nnn - Frame Left,nnn=1-320,default 1
  • /FT=nnn - Frame Top,nnn=1-240,default 1
  • /FW=nnn - Frame Width,nnn=1-320,default 320
  • /PA=nnn - Port Address,nnn=278,378,3bc
  • /PN=n - Port Number,n=1,2,3
  • /QM - Quiet Mode

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

QCOM.SYS

Quatech (www.quatech.com) asynchronous serial device driver for the Quatech ISA and PCI boards High baud rates to 921,600 bits per second, depending on UART type. Support for 16750 UARTs and their 64-byte FIFOs. Up to 32 serial ports.

  DEVICE=QCOM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

QUICKCAM.SYS

Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro

NOTE: It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bi-directional modes, respectively. Bi-directional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used. Available at: http://www.cix.co.uk/~elad/qv2.htm

DEVICE=QUICKCAM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes

QVCOM.SYS

Quatech (www.quatech.com) asynchronous serial device driver for the Quatech ISA and PCI boards for DOS.

DEVICE=QVCOM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

R0STUB.SYS

Is somewhere used by MMOS2. R0STUB is the ring-0 half of the sync-stream-manager (SSM) that allows MMPM/2 to synchronize audio and video. Allows audiosh.dll to talk to audio drivers vis IDC entrypoint. In the beginning, all the streaming took place at ring-0. Later (Warp 3?), the audio streaming was moved to ring-3. The API still had to be maintained to audio driver. R0STUB is small piece of code that takes FIFOs buffers to/from MMPM/2 ring-3 audio stream handler and delivers them from/to the hardware vender audio device driver.

DEVICE=C:\Mmos2\R0stub.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RAWEMYWI.OS2

DSL cable-modem driver from ISDNPM.

DEVICE=RAWEMYWI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RCPTRNDS.OS2

Racore Preferred Token Ring Adapter (PCMCIA Support).

DEVICE=RCPTRNDS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RDRHELP.200

This driver is part of MPTS and is necessary somewhere for the NetBIOS protocol.

DEVICE=\Ibmcom\Netprog\Rdrhelp.200 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

REFPART.SYS

Driver for accessing the Refernce Partition on IBM PS/2 Microchannel Machines. Information by: Ralph-Marcus Boenicke

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RMAUDIO.SYS

Reel Magic sound card driver.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ROUTE.SYS

This driver allows a Netware client to see Netware servers on other physical LAN (or segment) across source-routing routers (used by many IBM routers). This is equivalent to Route.nlm for a Netware server.

DEVICE=C:\Netware\Route.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RSJSCSI.SYS

The device driver RSJSCSI.SYS provides simplified access to SCSI devices. The CD Writer File System uses this device driver to access the CD Recorder (also needed for ATAPI).

DEVICE=RSJSCSI.SYS <parameter>

Parameter:

  • -q

While booting, ask user for confirmation before installing the device driver.

  • -x

This option allows using memory above the 16MB line. This works together with true 32-bit SCSI adapters, only (e.g. most EISA and PCI adapters).

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RSMVDWO.SYS

Driver for PolyPM a Remote Service Management Solution. http://www.iss2you.com

DEVICE=RSMVDWO.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RTFND.OS2

RTL8129 Fast Ethernet Adapter. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/realtek.zip.

DEVICE=RTFND.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RTGNDA.OS2

New description.

DEVICE=RTGNDA.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RTR16NDIS.OS2

Racore 16/4 Token-Ring Adapter.

DEVICE=RTR16NDIS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RTSND.OS2

NDIS MAC for RTL8139 Fast Ethernet Adapter.

  DEVICE=RTSND.OS2 <parameter>

Parameters

  • /V

Verbose mode

  • /Q

Quiet mode

  • /2 .. /9

Selecects other Drivername = netry in \ibmcom\protocol.ini used automaticly if you install more than one card.

  • /U

Number cards as found. useful if BUSNO, DEVICENO or ETHERID values are not present in protocol.ini

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RVGNDIS.OS2

Racore 10/100 AnyLAN Card.

DEVICE=RVGNDIS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

RZT2BOOT.SYS

This driver is used by the IBM AO-Manager.

  DEVICE=C:\SMG\Bin\Rzt2boot.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SB16D2.SYS

Driver for Sound Blaster 16 sound card.

DEVICE=SB16D2.SYS <parameter>

Parameter:

  • /C:

Card Number, this will be set to 1 in most cases

  • /D:

8-bit DMA channel, Valid values - 0, 1 & 3 (Sound Blaster cards that use Vibra chipset do not have 0). Default value - 1.

  • /H:

16-bit DMA channel, Valid values - 5, 6 & 7 (Sound Blaster cards that use Vibra chipset do not have 6). Default value - 5.

  • /I:

IRQ number, Valid values - 5, 7, 9, 10 & 11. Default IRQ - 5.

  • /A:

Base addresss, Valid values - 220, 240, 260, 280 Default value - 220.

  • /B:

Buffer size in KB, Valid values - 1-24. While any value in this range will work fine, to get the best results don't use this option and let the driver use the default buffer size. Default value - 8KB.

  • /M:

MPU port address Valid values - 300 & 330 Default value - 330.

  • /N:

Driver name, set this to SBAUD1$

  • /Q

Quiet mode flag, OPTIONAL. Setting this option disables initialization messages. If not specified the initialization messages are displayed during boot-up.

  • /EXT

Use MPU port instead of internal synth for MIDI, OPTIONAL By default the drivers are configured to use the internal synthesizer. But if you have a daughterboard attached to your Sound Blaster card and you want MIDI playback to use the synthesizer in the daughterboard, specify this flag.

  • /P

Ignore PnP BIOS if it is present. If PnP BIOS is present, the driver usually queries the BIOS for certain PnP port addresses. Specifying this option causes the driver not to access the BIOS and determine these port addresses itself.

  • /G

Override PnP BIOS, undocumented switch. When used all parameters must be specified.

TIP: Look for the SB163264.ZIP package which contains all drivers for the soundblaster cards including those for the AWE 64.

A FREE Mixer for SB 16/32/64 is Mixomat 1.01b by Christoph Bratschi, and the newer Mixomat 2.0 available at http://www.bratschi.net

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SBAWED2.SYS

It is used by Creative Labs AWE32 soundcards.

DEVICE=C:\Sbos2\Sbawed2.sys 

Parameter: See DEVICE SB16D2.SYS

TIP: According to OS/2-Inside the statement can be shortened to:

  SBAWED2.SYS /N:SBAUD1$

TIP: Look for the SB163264.ZIP package which contains all drivers for the soundblaster cards including those for the AWE 64. According to OS2VOICE for the AWE 64 the entry should look like this:

 DEVICE=drive:\SBOS2\SBAWED2.SYS /C:1 /D:1 /H:5 /I:5 /A:220 /B:1 /M:330 /N:SBAUD1$ /G

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes


SBLIVE16.SYS

Soundblaster Live 16Bit MMPM/2 Sounddriver ported from the Linux sources by Sander van Leuween (sandervl@xs4all.nl)

DEVICE=SBLIVE16.SYS <parameter>

Parameters:

  • /V verbose (prints copyrights during driver init)
  • /C enable CD audio input
  • /M enable microphone audio input
  • /L enable linein audio input
  • /A enable aux audio input (since driver 0.80)

ATTENTION: Read the supplied readme.txt to avoid troubles if you have installed the scitech display drivers (SDDHELP.SYS).

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SBLIVE32.SYS

Soundblaster Live 32Bit core audio driver ported from the Linux sources by Sander van Leuween (sandervl@xs4all.nl)

DEVICE=SBLIVE32.SYS <parameter>

Parameter:

  • /D

Print start and end address of code (useful to locate code that causes a trap)

NOTE: The install.cmd copies - if it finds a Warp 4.5 (fixpak 13 or WarpServer for E-Business) an driver according to the new KEE API (32 Bit driver architecture) to this file.

A appropiate Mixer is the FREE LBMix by Lesha Bogdanow (boga@inbox.ru) The lastest version of the mixer can be downloaded from http://www.podolsk.ru/~boga/OS2Programs.html where you can also find a couple of other useful OS/2 programs.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SBMIX.SYS

Soundblaster-mixer driver.

DEVICE=SBMIX.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SCANHP1.SYS

SCSISCAN OS/2 Copyright from Danmar Systems Inc. Scanner Driver for use with the propietary SCSI controller included with the HPIIp series.

DEVICE=SCANHP1.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SCANOS2.SYS

SCSISCAN OS/2 Version 1.20 from Danmar Systems Inc. ASPI Compatible Scanner Driver.

DEVICE=SCANOS2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SDI_ASPI.SYS

PC-BaX ASPI Device Driver. This driver provides PC-BaX with support for SCSI devices, it uses the OS2ASPI.DMD device manager. This is the prefered method of SCSI support for PC-BaX and should be used in almost all cases.

DEVICE=SDI_ASPI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SDI_CISA.SYS

PC-BaX ISA Device Driver. This driver provides PC-BaX with support for a special CRISTIE 8-bit SCSI controller.

DEVICE=SDI_CISA.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SDI_IDE.SYS

PC-BaX IDE Device Driver. This driver provides PC-BaX with support for IDE connected devices like Travan backup stations.

DEVICE=SDI_IDE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SDI_LPT.SYS

PC-BaX LPT Device Driver. This driver provides PC-BaX with support for Cristie parallel port connect tape drives, it does not need any other OS/2 Devices managers or Drivers.

DEVICE=SDI_LPT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SDI_SCSI.SYS

PC-BaX SCSI Device Driver. This driver provides PC-BaX with support for SCSI devices, it uses the OS2SCSI.DMD device manager. This method of SCSI support is only neccesary when using an IBM MCA type SCSI controller. See common problems by clicking on the support icon within PC-BaX for a full description.

DEVICE=SDI_SCSI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SEAGB24.SYS

Sytos Plus driver for the Seagate 4mm Tape.

DEVICE=SEAGB24.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SESDD32.SYS

Security device driver. Part of IBM's security system - enabler driver. Will stop install if by itself. Network Associates has a product called 'VirusScan for OS/2'. In its User Guide's appendix 'C' is a very good description of how to modifiy the config.sys file manually to add SES to the user's machine.

DEVICE=C:\Os2\Boot\Sesdd32.sys

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SIO.SYS

The Sio.sys driver is a replacement for the com.sys driver. The Sio.sys driver can support up to 16 COM ports.

DEVICE=\OS2\BOOT\SIO.SYS <parameters>
DEVICE=\OS2\BOOT\SIO.SYS (Cn, An, In, Ig, Fc)
  • CN

The number of the Com port or the string COM1 to COMn. If you use a * in front of the Com port, then the port will be used as a PCMCIA Com port.

  • AN

A hexnumber to define the I/O address of the Com port.

  • IN

The IRQ number (0 to 15) or the string IRQ0 to IRQ15. If you don't use this parameter, SIO will search for a IRQ.

  • IG

This exists only for compatibility with COM.SYS and is ignored by Sio.sys.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes


SIS900.OS2

SIS 900/7016 PCI Fast Ethernet Adapter.

DEVICE=SIS900.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SND16.SYS

The SND16.SYS driver is used by the MAD16 soundcard.

DEVICE=C:\Os2\Boot\SND16.SYS <parameters>

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SND931.SYS

OPTiSound 82C931 Sound Card Driver.

DEVICE=SND931.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SNDSCAPE.SYS

Ensoniq Soundscape VIVO (SND-ENSVIVO) AD1848 Audio OS/2 Device Driver.

DEVICE=SNDSCAPE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SOCKETS.SYS

Network driver.

DEVICE=\MPTN\PROTOCOL\SOCKETS.SYS <parameter>

Parameters:

  • /c:value

Number of the COM port to which debug information should be sent. Value may be any valid COM port number. Default = 2

  • /v

Display the banner at boot time.

  • /uis:0

Turn off unique ID for select(). If this parameter is not set it defaults to ON .

  • /mem:value

Number of 4kbyte clusters allocated at initialization time. Value can be in the range from 30 to 32766 . Default = 75

  • /gdt:value

The maximum number of 64kbyte blocks the stack can allocate. Default = 80

TIP: According to IBM, the undocumented parameter /UIS:0 is for use on the 3172 Offload System to improve performance. This parameter is only intended for use on the 3172 Offload System, and turns off the process id : thread id processing on select() calls in the stack.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SOCKETSK.SYS

32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak 13 for Warp 4. Part of the TCP/IP Ver. 4.x firewall.

DEVICE=SOCKETSK.SYS <parameter>

Parameter:

  • /V

Verbose, shows version-number

  • /MEM:#

amount of 4KB Clusters. Standard = 75; valid Range = 30 - 32766

  • /GDT:#

max. amount of 64KB Blocks the Stack can arrange; Standard = 80

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SPX.SYS

Provides support for the Novell Netware SPX protocol.

DEVICE=C:\Netware\Spx.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SRVIFS.SYS

Part of the ThinIFS by IBM.

DEVICE=SRVIFS.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SSCOMA1.SYS

OS/2 Serial port driver with auto-detection of Serial Solutions PCI serial cards available at: http://www.brainboxes.com/

PCI card support, 115200 baud rate, ISA interrupt sharing cards with a shared interrupt status register, PCMCIA single function serial communications card support, the device driver is a replacement for the COM.SYS standard serial port driver. Up to 8 COM ports can be opened.

DEVICE=SSCOMA1.SYS <parameter>

Parameter:

  • /TTEMPLATE.PCI

This template describes a range of PCI coms cards and gives additional information to the driver about a specific card's non-standard features.

  • /L

List the detected PCI cards

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

SWD1.SYS

SWD1.SYS is an OS/2 device driver for the Superwatchdog SWD1. The purpose is to detect and restart a hanging system by hardware. [2] [3]

TCPBEUI.OS2

This is the TCPBEUI (NetBIOS over TCP/IP) protocol driver.

DEVICE=C:\Ibmcom\Protocol\TcpBEUI.os2 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
* * Yes Yes

TESTCFG.SYS

Test configuration device driver. TESTCFG.SYS is used during the install process to test your systems configuration. It is also used by the Selective Install process and during device driver installations.

DEVICE=C:\Boot\Testcfg.sys 

NOTE: Because this driver is used by the Selective Install process, it should not be deleted.

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

THESEUS2.SYS

Driver for the outdated memory analysis tool THESEUS2 by IBM. See DEVICE THESEUS5.SYS for an update.

DEVICE=THESEUS2.SYS

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

THESEUS5.SYS

Driver for the new memory analysis tool THESEUS3 by IBM downloadable at: ftp://ftp.boulder.ibm.com/ps/products/os2/fixes/v4warp/theseus3/

DEVICE=THESEUS5.SYS

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

TOKEN.SYS

This line differs depending on the network board you have.

DEVICE=TOKEN.SYS

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

TR2KNDIS.OS2

Texas Instruments TokenLite Compatible Token-Ring Adapter driver.

DEVICE=TR2KNDIS.OS2

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

TSRKRN.SYS

Module for Teles ISDN-Cards.

DEVICE=TSRKRN.SYS

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

UART.SYS

Basic UART device driver for DEVICE SIO2K.SYS.

DEVICE=UART.SYS

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ULTRADD.SYS

Device driver for Gravis Ultra Soundcards (discontinued)

DEVICE=ULTRADD.SYS <parameter>

Now FREE available at http://www.xs4all.nl/~sandervl free REGISTRATION KEY: 191181338

Parameter:

  • /P:,
  • /I:,
  • /D:,
  • /C:

(default = 28) (Ignored on a GUS PnP)

  • /J

(enable joystick)

  • /L

(always enable line-in)

  • /V

(verbose messages at startup)

  • /X

Displays initial Code & Data offsets (for debugging crashes)

The next switches are only for the GUS PnP (Pro) and other InterWave based soundcards:

  • /G

(enable GUS PnP (and Interwave) detection)

  • /R

(force PnP reset if your system doesn't have a PnP BIOS and you are NOT running OS/2 Warp 4.0) NOTE: /R seems to be necessary for the Reveal WaveXtreme

  • /E:XXXXXXX

(3 letters + 4 digits) (PnP ISA Vendor ID for Interwave based soundcards not sold by Gravis example (uses the GUS PnP Vendor ID): /E:GRV0001 The Vendor ID can be found in the iw.ini file)

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

ULTRAVDD.SYS

Virtual Device driver for Gravis Ultra Soundcard for DOS (discontinued).

DEVICE=ULTRAVDD.SYS

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

UNICODE.SYS

Warp Server for E-Business Unicode Driver, enables unicode and locale support. Necessary for JFS.IFS.

DEVICE=UNICODE.SYS <parameter>

Parameter:

  • -L

Specifies that base locale setting is permanent. If selected \LANGUAGE\LOCALE\DEFAULT.LOC overrides the config.sys settings.

  • -x

Disables codepage conversion, must not be used with JFS.IFS

  • -V

Verbose

Platform Support

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No No No Yes

USLGENIO.SYS

Driver for the TV HappyPlayer, this driver can be used with TV cards which have Bt848, Bt849, Bt878 or Bt879 chipsets. This driver will not work with other TV applications.

DEVICE=C:\Apps\HappyTV\Uslgenio.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

V110.SYS

Module for Teles ISDN cards

DEVICE=V110.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VAD64.SYS

Virtual Device driver used by ATI 3D Rage graphic adapter cards. Gives support for DOS and WIN-OS/2.

DEVICE=C:\OS2\Vad64.sys
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

VAPM.SYS

Virtual device driver for Advanced Power Management used by DOS and Windows.

DEVICE=C:\Os2\Boot\Vapm.sys 
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

VASPI.SYS

Adaptec ASPI device drivers for SCSI support.

DEVICE=VASPI.SYS

After you have installed the driver(s) correctly and have restarted your system, you will find a new entry in the DOS settings of DOS program objects, ASPI_ENABLE. This parameter defines, if ASPI is available in the session started from this object. The default is OFF, i.e. the ASPI interface is NOT available. Please change this parameter for all those program objects which you use to start your (DOS and WIN-OS/2) ASPI applications to ON.

The default (OFF) can be changed globally to ON by adding the option /ON to the line DEVICE=C:\OS2\VASPI.SYS in your CONFIG.SYS. In this case all DOS and WIN-OS/2 sessions have ASPI available automatically, but you can still disable ASPI for each program object individually.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VASACOM1.SYS

This driver was found on XTEL software configurations (version 5.6 (MINI X-TEL) and 6.0). This driver is for PLC usage.

Examples:

DEVICE=X:\OS2\VASACOM1.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

VASPIDD.SYS

Adaptec ASPI device drivers for SCSI support.

DEVICE=VASPIDD.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VAUDDRV.SYS

DOS Soundcard-Driver.

DEVICE=VAUDDRV.SYS

Parameter:

  • ES16881$ for Soundcards with ESS 1688 chip
  • ES18681$ for Soundcards with ESS 1868 chip
  • ES18691$ for Soundcrads with ESS 1869 chip

NOTE: the parameter is the link between the OS2 driver and the DOS driver. The DOS driver inherits it's settings associated with the parameter.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VBOXGUEST.SYS

This driver is for OS/2 guests running inside a VirtualBox virtual machine. Included on the VirtualBox Guest Additions virtual CD image. Last version: 1.6.51 - 2008

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes

VBSAUDIO.SYS

Virtual DOS Driver for the C-Media CMI 8330 soundcard.

DEVICE=VBSAUDIO.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCADCMDR.SYS

Ctrl-Alt-Del Commander DOS FS Game Boost Driver.

DEVICE=VCADCMDR.SYS

NOTE: It is reported that fixpak 13 for Warp 4 doesn't work correctly with this driver.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCAPI.SYS

Teles Virtual DOS ISDN Capi Driver.

DEVICE=VCAPI.SYS

Note: Delete this driver when running Warp Server for E-Business or Fixpack 13 for Warp 4 otherwise you'll get a Trap.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCAPI20.SYS

ELSA Virtual DOS ISDN CAPI 2.0 Driver

DEVICE=VCAPI20.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCAPIAVM.SYS

AVM Virtual DOS Driver for the ISDN controllers B1 and Fritz.

DEVICE=VCAPIAVM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCDROM.SYS

Virtual device driver for CDRom drives used by DOS and Windows.

DEVICE=C:\Os2\Boot\Vcdrom.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCFOS.SYS

Gives support for CFOS in DOS and Windows.

DEVICE=C:\Cfos\Vcfos.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCGA.SYS

Virtual device driver for colour graphic adapters (CGA) used by DOS and Windows.

DEVICE=C:\Os2\Mdos\Vcga.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCOM.SYS

Virtual device driver for the serial Ports COMx, used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VCOM.SYS

NOTE: If you are using COM3 and/or COM4, add the appropriate parameters to the COM.SYS line above only. It is not necessary to add any parameters to this line. VCOM.SYS inherits its parameters from the COM.SYS line.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCOMPAT.SYS

Compatibility VDD. It hooks itself into the middle of several APIs and it contains a magical VM patcher, that is able to patch out some buggy routines on-the-fly, which means the user won't notice that he got a broken program.

DEVICE=C:\OS2\BOOT\VCOMPAT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VCSHDD.SYS

Is needed for the video parts of MMOS2.

DEVICE=C:\Mmos2\Vcshdd.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VDOSTCP.SYS

Virtual device driver for the TCP/IP protocol used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VDOSTCP.SYS

Parameter:

  • /C:x

x is the number of the serial port.

TIP: If you don't need TCP/IP support in DOS sessions REM this line.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VDOSTCP.VDD

DOS API Driver for the TCP/IP protocol.

DEVICE=C:\OS2\BOOT\VDOSTCP.VDD

TIP: If you don't need TCP/IP support in DOS sessions REM this line.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VDPMI.SYS

Supports the DPMI memory access and is required to support all Windows applications.

DEVICE=C:\OS2\MDOS\VDPMI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VDPX.SYS

This driver is the protected mode to real mode driver for DPMI applications.

DEVICE=C:\OS2\MDOS\VDPX.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VDTA.SYS

DOS Virtual device driver for the Data Transport Agent (DTA)

DEVICE=VDTA.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VEGA.SYS

Virtual device driver for EGA graphic cards used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VEGA.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VGENAUD.SYS

Generic WinOS/2 Audio Driver R0 VDD component.

DEVICE=VGENAUD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VHAPI.OS2

Paul Kurr wrote the following. "This provides for Virtual HLLAPI support within VDM's (not sure about VMB's). This allows DOS programs that use the HLLAPI to access the HOST sessions running at the OS/2 level under comm mgr. So you can actually watch your comm mgr sessions in one window and your DOS program in another while they interact."

DEVICE=VHAPI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VIPX.SYS

This driver enables the Novell Netware IPX support for DOS based Netware utilities.

DEVICE=C:\NETWARE\VIPX.SYS 
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VKBD.SYS

Virtual device driver for the keyboard used by DOS and Windows.

DEVICE=C:\OS2\BOOT\Vkbd.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VLAN.OS2

OS/2 Virtual LAN Kernal.

DEVICE=VLAN.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

VLFN.SYS

Driver for long filenames in DOS sessions.

DEVICE=VLFN.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VLFNMEM.SYS

Driver for long filenames in DOS sessions.

DEVICE=VLFNMEM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VLTMODEM.SYS

Lucent Technologies Virtual DOS Modem Driver, V. 5.55 Beta 3. Available for FREE at http://www.drmartinus.de/notebook2/notebook.htm

DEVICE=VLTMODEM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMAD16.SYS

Virtual device driver for the MAD16 soundcard used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VMAD16.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMANWIN.SYS

This driver is used by your Graphic card to support Windows.

DEVICE=C:\OS2\MDOS\VMANWIN.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMDRV.SYS

This driver is used by Microsoft Virtual PC. Called OS/2 Additions Driver.

DEVICE=C:\VM\VMDRV.SYS

Parameters:

  • /Q

Quiet Mode: Disable messages at boot.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

VMGAX64.SYS

Virtual device driver for Matrox graphic cards.

DEVICE=C:\MGA\OS2\VMGAX64.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMMOUSE.SYS

This is Mouse Driver included on Microsoft Virtual Machine Additions for OS/2. This one allows to automatic switch from Windows to OS/2 running on Microsoft Virtual PC and viceversa without pressing the host key.

DEVICE=C:\VM\VMMOUSE.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

VMODEM.SYS

Ray Gwinn's Virtaul Modem device driver.

DEVICE=VMODEM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMONO.SYS

Virtual device driver for monochrome graphic cards used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VMONO.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMOUSE.SYS

Virtual device driver for the mouse used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VMOUSE.SYS 

NOTE: If you don't have this line (or you REM'd it), you will not have mouse support in your DOS sessions.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMPU401.SYS

Virtual DOS MPU401 driver.

DEVICE=VMPU401.SYS

Parameter:

  • MPU4011$

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VMVDD.SYS

This driver comes with Microsoft Virtual Machine Additions for OS/2 for MS Virtual PC 2007.

DEVICE=x:\VM\VMVDD.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
? Yes Yes Yes

VNETAPI.OS2

This driver is part of the File and Print client for OS/2.

Paul Kurr wrote: "This sets up the virtual network support API within the VDM's (not VMB's). This allows DOS programs running within a VDM to "see" that the network is loaded, and interact with it (get/set redirections and such). If VDOLANAPI support is required in a VMB the device driver VNETAPI.SYS needs to be loaded within the VMB (this is found in \IBMLAN\NETPROG)."

DEVICE=C:\IBMLAN\NETPROG\VNETAPI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VNETAPI.SYS

Paul Kurr wrote: "This sets up the virtual network support API within the VDM's (not VMB's). This allows DOS programs running within a VDM to "see" that the network is loaded, and interact with it (get/set redirections and such). If VDOLANAPI support is required in a VMB the device driver VNETAPI.SYS needs to be loaded within the VMB (this is found in \IBMLAN\NETPROG)."

DEVICE=VNETAPI.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VNPX.SYS

This device driver works _with_ your systems math coprocessor. If you do not have a math coprocessor, this driver will not load. Some have suggested that if you add it to your config.sys you will see an enhancement in your systems performance. Not so. There is no reason for it to be added to your config.sys file. IF YOU HAVE A MATH COPROCESSOR, OS/2 WILL LOAD THIS DRIVER AUTOMATICALLY. If you add it to your config.sys file, a second copy of the driver will be loaded. In doing so, many have reported that no DOS programs would run. DO NOT ADD THIS STATEMENT TO YOUR CONFIG.SYS FILE.

DEVICE=VNPX.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VP9100.SYS

Virtual device driver for Weitek P9100 based graphic cards used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VP9100.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VP91VGA.SYS

Virtual device driver for Weitek P9100 based graphic cards used by DOS and Windows.

DEVICE=C:\OS2\BOOT\VP91VGA.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VPC.SYS

Virtual Dos Driver of Process Commander.

DEVICE=VPC.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VPCAPP.SYS

InnoTek Virtual PC for OS/2 Application driver. Virtual PC for OS/2 allows you to run additional operating systems on top of your OS/2 system. It is based on Virtual PC by Connectix Corporation, delivering the most advanced virtualization technology available.

DEVICE=VPCAPP.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VPCMCIA.SYS

This driver gives support for PCMCIA cards in DOS and Windows sessions.

DEVICE=C:\OS2\BOOT\VPCMCIA.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VPICPARM.SYS

Some applications like PCAS (and some terminal emulators) have problems sharing IRQ9 in a VDM. Since the DOS Virtual Device drivers are not loaded out of CONFIG.SYS, a new device driver VPICPARM.SYS has been added starting with Warp 3 FixPak 38 and Warp 4 FixPak 8.

To prevent sharing of IRQ9 in a VDM, add the device in config.sys: Next, in the settings for the program that requires exclusive access to IRQ9, set the DOS setting HW_SHARE_IRQ9 to ON. When you next boot your system, VDMs will not share IRQ

DEVICE=VPICPARM.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VPRPMI.SYS

Private video PMI virtual device driver. GRADD Display Drivers - generic DOS part. Some laptops, including those that use the Intel i845, the S3 Savage/IX or S3 SuperSavage chipsets, will require an additional driver for full LCD BIOS support. When booting with the LCD panel active, if the OS/2 System object does not display refresh rate selection, and/or displays video modes larger than your LCD panel, then you need this driver. This driver should not be required for the"Convenience Pak" releases of OS/2 Warp 4 and WSeB.

DEVICE=C:\OS2\MDOS\VPRPMI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VSIO.SYS

Virtual device driver for the serial ports COMx used by DOS and Windows. This is a replacement for the Vcom.sys driver.

DEVICE=C:\Os2\Boot\VSIO.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VSND931.SYS

OPTiSound 82C931 Virtual Audio Card Driver.

DEVICE=VSND931.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VSVGA.SYS

Virtual device driver for SVGA graphic cards used by DOS and Windows.

DEVICE=x:\OS2\BOOT\VSVGA.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VVGA.SYS

Virtual device driver for VGA graphic cards used by DOS and Windows.

DEVICE=x:\OS2\BOOT\VVGA.SYS 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VVTCAPT.SYS

TVShow Video Capturing driver. Available at: http://os2.kiev.ua

DEVICE=VVTCAPT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VW32S.SYS

Supplies support for the WIN32S Windows APIs. Only needed for Windows programs that use WIN32S APIs.

DEVICE=C:\OS2\MDOS\VW32S.SYS

NOTE: This driver has no parameters.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VWCAT.SYS

This driver is used by the Watchcat task killer.

DEVICE=x:\Watchcat\Vwcat.sys 

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VWIN.SYS

This driver provides seamless Windows support in Win-OS2.

DEVICE=C:\OS2\MDOS\VWIN.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VX00.SYS

Old version of Ray Gwinn's communication driver, needed by some DOS-VDM programs.

TIP: by Mike Luther To load it together with the later version of VMODEM.SYS from SIO2K these entries must be done:

rem device=C:\sio2k\esp.sys logfile=C:\sio2k\sio2k.log NoPause
device=C:\sio2k\uart.sys logfile=C:\sio2k\sio2k.log
device=C:\sio2k\vsio2k.sys logfile=C:\sio2k\vsio2k.log _ vIrqList(2=3,1=4,3=12)
device=C:\sio2k\vx00.sys
device=C:\sio2k\vmodem.sys logfile=C:\sio2k\sio2k.log NoPause nPorts=1
device=C:\sio2k\sio2k.sys logfile=C:\sio2k\sio2k.log 
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

VYMF724.SYS

Virtual DOS YAMAHA YMF724 sound card driver.

DEVICE=VYMF724.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

WACOMOS2.SYS

Pen for OS/2 Device Driver for Wacom SD-501.

DEVICE=WACOMOS2.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

WARPDRVR.SYS

Driver for TVShow.

DEVICE=WARPDRVR.SYS
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Yes Yes

WATCHCRD.SYS

WATCHCRD.SYS is an OS/2 device driver for the CEWS WatchCard. The purpose is to detect and restart a hanging system by hardware. [4], [5]