CP Error Codes
Reprint Courtesy of International Business Machines Corporation, © International Business Machines Corporation
The following shows the numerical value of an error, its symbolic name, and a brief description of the error.
0 to 99
| Code | Name | Description |
|---|---|---|
| 0 | NO_ERROR | No error occurred. |
| 1 | ERROR_INVALID_FUNCTION | Function number is not valid. |
| 2 | ERROR_FILE_NOT_FOUND | File not found. |
| 3 | ERROR_PATH_NOT_FOUND | Path not found. |
| 4 | ERROR_TOO_MANY_OPEN_FILES | Too many open files (no handles left). |
| 5 | ERROR_ACCESS_DENIED | Access denied. |
| 6 | ERROR_INVALID_HANDLE | Handle is not valid. |
| 7 | ERROR_ARENA_TRASHED | Memory control blocks destroyed. |
| 8 | ERROR_NOT_ENOUGH_MEMORY | Insufficient memory. |
| 9 | ERROR_INVALID_BLOCK | Memory-block address is not valid. |
| 10 | ERROR_BAD_ENVIRONMENT | Environment is not valid. |
| 11 | ERROR_BAD_FORMAT | Format is not valid. |
| 12 | ERROR_INVALID_ACCESS | Access code is not valid. |
| 13 | ERROR_INVALID_DATA | Data is not valid. |
| 14 | Reserved | |
| 15 | ERROR_INVALID_DRIVE | Drive is not valid. |
| 16 | ERROR_CURRENT_DIRECTORY | Attempting to remove current directory. |
| 17 | ERROR_NOT_SAME_DEVICE | Not same device. |
| 18 | ERROR_NO_MORE_FILES | No more files. |
| 19 | ERROR_WRITE_PROTECT | Attempt to write on write-protected diskette. |
| 20 | ERROR_BAD_UNIT | Unknown unit. |
| 21 | ERROR_NOT_READY | Drive not ready. |
| 22 | ERROR_BAD_COMMAND | Unknown command. |
| 23 | ERROR_CRC | Data error - cyclic redundancy check. |
| 24 | ERROR_BAD_LENGTH | Request structure length is not valid. |
| 25 | ERROR_SEEK | Seek error. |
| 26 | ERROR_NOT_DOS_DISK | Unknown media type. |
| 27 | ERROR_SECTOR_NOT_FOUND | Sector not found. |
| 28 | ERROR_OUT_OF_PAPER | Printer is out of paper. |
| 29 | ERROR_WRITE FAULT | Write fault. |
| 30 | ERROR_READ_FAULT | Read fault. |
| 31 | ERROR_GEN_FAILURE | General failure. For DosGetShrSeg and DosGetNamedSharedMem, indicates that a segment's maximum reference count of 65535 has been exceeded. |
| 32 | ERROR_SHARING_VIOLATION | Sharing violation. |
| 33 | ERROR_LOCK_VIOLATION | Lock violation. |
| 34 | ERROR_WRONG_DISK | Disk change is not valid. |
| 35 | ERROR_FCB_UNAVAILABLE | FCB unavailable. |
| 36 | ERROR_SHARING_BUFFER_EXCEEDED | Sharing buffer overflow. |
| 37 | ERROR_CODE_PAGE_MISMATCHED | Code page does not match. |
| 38 | ERROR_HANDLE_EOF | End of file reached. |
| 39 | ERROR_HANDLE_DISK_FULL | Disk is full. |
| 40 | Reserved | |
| 41 | Reserved | |
| 42 | Reserved | |
| 43 | Reserved | |
| 44 | Reserved | |
| 45 | Reserved | |
| 46 | Reserved | |
| 47 | Reserved | |
| 48 | Reserved | |
| 49 | Reserved | |
| 50 | ERROR_NOT_SUPPORTED | Network request not supported. |
| 51 | ERROR_REM_NOT_LIST | Remote network node is not online. |
| 52 | ERROR_DUP_NAME | Duplicate file name in network. |
| 53 | ERROR_BAD_NETPATH | Network path not found. |
| 54 | ERROR_NETWORK_BUSY | Network is busy. |
| 55 | ERROR_DEV_NOT_EXIST | Device is not installed in network. |
| 56 | ERROR_TOO_MANY_CMDS | Network command limit reached. |
| 57 | ERROR_ADAP_HDW_ERR | Network adapter hardware error. |
| 58 | ERROR_BAD_NET_RESP | Incorrect response in network. |
| 59 | ERROR_UNEXP_NET_ERR | Unexpected error in network. |
| 60 | ERROR_BAD_REM_ADAP | Remote network adapter error. |
| 61 | ERROR_PRINTQ_FULL | Network printer queue is full. |
| 62 | ERROR_NO_SPOOL_SPACE | No space in print spool file. |
| 63 | ERROR_PRINT_CANCELLED | Print spool file deleted. |
| 64 | ERROR_NETNAME_DELETED | Network name deleted. |
| 65 | ERROR_NETWORK_ACCESS_DENIED | Access to network denied. |
| 66 | ERROR_BAD_DEV_TYPE | Device type for network is not valid. |
| 67 | ERROR_BAD_NET_NAME | Network name not found. |
| 68 | ERROR_TOO_MANY_NAMES | Network name limit exceeded. |
| 69 | ERROR_TOO_MANY_SESS | Network session limit exceeded. |
| 70 | ERROR_SHARING_PAUSED | Temporary pause in network. |
| 71 | ERROR_REQ_NOT_ACCEP | Network request denied. |
| 72 | ERROR_REDIR_PAUSED | Pause in network print disk redirection. |
| 73 | ERROR_SBCS_ATT_WRITE_PROT | Attempted write on protected disk. |
| 74 | ERROR_SBCS_GENERAL_FAILURE | General failure, single-byte character set. |
| 75 | ERROR_XGA_OUT_MEMORY | XGA is out of memory. |
| 76 | Reserved | |
| 77 | Reserved | |
| 78 | Reserved | |
| 79 | Reserved | |
| 80 | ERROR_FILE_EXISTS | File exists. |
| 81 | ERROR_DUP_FCB | Reserved. |
| 82 | ERROR_CANNOT_MAKE | Cannot make directory entry. |
| 83 | ERROR_FAIL_I24 | Failure on INT24. |
| 84 | ERROR_OUT_OF_STRUCTURES | Too many redirections. |
| 85 | ERROR_ALREADY_ASSIGNED | Duplicate redirection. |
| 86 | ERROR_INVALID_PASSWORD | Password is not valid. |
| 87 | ERROR_INVALID_PARAMETER | Parameter is not valid. |
| 88 | ERROR_NET_WRITE_FAULT | Network device fault. |
| 89 | ERROR_NO_PROC_SLOTS | No process slots available. |
| 90 | ERROR_NOT_FROZEN | System error. |
| 90 | ERROR_SYS_COMP_NOT_LOADED | System error. |
| 91 | ERR_TSTOVFL | Timer service table overflow. |
| 92 | ERR_TSTDUP | Timer service table duplicate. |
| 93 | ERROR_NO_ITEMS | No items to work on. |
| 95 | ERROR_INTERRUPT | Interrupted system call. |
| 99 | ERROR_DEVICE_IN_USE | Device in use. |
100 to 199
| Code | Name | Description |
|---|---|---|
| 100 | ERROR_TOO_MANY_SEMAPHORES | User/system open semaphore limit reached. |
| 101 | ERROR_EXCL_SEM_ALREADY_OWNED | Exclusive semaphore already owned. |
| 102 | ERROR_SEM_IS_SET | DosCloseSem found semaphore set. |
| 103 | ERROR_TOO_MANY_SEM_REQUESTS | Too many exclusive semaphore requests. |
| 104 | ERROR_INVALID_AT_INTERRUPT_TIME | Operation at interrupt time is not valid. |
| 105 | ERROR_SEM_OWNER_DIED | Previous semaphore owner ended without freeing semaphore. |
| 106 | ERROR_SEM_USER_LIMIT | Semaphore limit exceeded. |
| 107 | ERROR_DISK_CHANGE | Insert drive B disk into drive A. |
| 108 | ERROR_DRIVE_LOCKED | Drive locked by another process. |
| 109 | ERROR_BROKEN_PIPE | Write on pipe with no reader. |
| 110 | ERROR_OPEN_FAILED | Open/create failed due to explicit fail command. |
| 111 | ERROR_BUFFER_OVERFLOW | Buffer passed to system call too small to hold return data. |
| 112 | ERROR_DISK_FULL | Not enough space on the disk. |
| 113 | ERROR_NO_MORE_SEARCH_HANDLES | Cannot allocate another search structure and handle. |
| 114 | ERROR_INVALID_TARGET_HANDLE | Target handle in DosDupHandle is not valid. |
| 115 | ERROR_PROTECTION_VIOLATION | User virtual address is not valid. |
| 116 | ERROR_VIOKBD_REQUEST | Error on display write or keyboard read. |
| 117 | ERROR_INVALID_CATEGORY | Category for DevIOCtl not defined. |
| 118 | ERROR_INVALID_VERIFY_SWITCH | Value passed for verify flag is not valid. |
| 119 | ERROR_BAD_DRIVER_LEVEL | Level four driver not found. |
| 120 | ERROR_CALL_NOT_IMPLEMENTED | Function called is not valid. |
| 121 | ERROR_SEM_TIMEOUT | Time-out occurred from semaphore API function. |
| 122 | ERROR_INSUFFICIENT_BUFFER | Data buffer too small. |
| 123 | ERROR_INVALID_NAME | Illegal character or file-system name is not valid. |
| 124 | ERROR_INVALID_LEVEL | Level for information retrieval or setting is not valid. |
| 125 | ERROR_NO_VOLUME_LABEL | No volume label found with DosQueryFSInfo function. |
| 126 | ERROR_MOD_NOT_FOUND | Module handle not found with DosQueryProcAddr(), DosQueryModAddr(). |
| 127 | ERROR_PROC_NOT_FOUND | Procedure address not found with DosQueryProcAddr(). |
| 128 | ERROR_WAIT_NO_CHILDREN | DosWaitChild finds no children. |
| 129 | ERROR_CHILD_NOT_COMPLETE | DosWaitChild children not ended. |
| 130 | ERROR_DIRECT_ACCESS_HANDLE | Handle operation is not valid for direct disk-access handles. |
| 131 | ERROR_NEGATIVE_SEEK | Attempting seek to negative offset. |
| 132 | ERROR_SEEK_ON_DEVICE | Application trying to seek on device or pipe. |
| 133 | ERROR_IS_JOIN_TARGET | Drive has previously joined drives. |
| 134 | ERROR_IS_JOINED | Drive is already joined. |
| 135 | ERROR_IS_SUBSTED | Drive is already substituted. |
| 136 | ERROR_NOT_JOINED | Cannot delete drive that is not joined. |
| 137 | ERROR_NOT_SUBSTED | Cannot delete drive that is not substituted. |
| 138 | ERROR_JOIN_TO_JOIN | Cannot join to a joined drive. |
| 139 | ERROR_SUBST_TO_SUBST | Cannot substitute to a substituted drive. |
| 140 | ERROR_JOIN_TO_SUBST | Cannot join to a substituted drive. |
| 141 | ERROR_SUBST_TO_JOIN | Cannot substitute to a joined drive. |
| 142 | ERROR_BUSY_DRIVE | Specified drive is busy. |
| 143 | ERROR_SAME_DRIVE | Cannot join or substitute a drive to a directory on the same drive. |
| 144 | ERROR_DIR_NOT_ROOT | Directory must be a subdirectory of the root. |
| 145 | ERROR_DIR_NOT_EMPTY | Directory must be empty to use join command. |
| 146 | ERROR_IS_SUBST_PATH | Path specified is being used in a substitute. |
| 147 | ERROR_IS_JOIN_PATH | Path specified is being used in a join. |
| 148 | ERROR_PATH_BUSY | Path specified is being used by another process. |
| 149 | ERROR_IS_SUBST_TARGET | Cannot join or substitute a drive that has a directory that is the target of a previous substitute. |
| 150 | ERROR_SYSTEM_TRACE | System trace error. |
| 151 | ERROR_INVALID_EVENT_COUNT | DosWaitMuxWaitSem errors. |
| 152 | ERROR_TOO_MANY_MUXWAITERS | System limit of 100 entries reached. |
| 153 | ERROR_INVALID_LIST_FORMAT | List format is not valid. |
| 154 | ERROR_LABEL_TOO_LONG | Volume label too big. |
| 155 | ERROR_TOO_MANY_TCBS | Cannot create another TCB. |
| 156 | ERROR_SIGNAL_REFUSED | Signal refused. |
| 157 | ERROR_DISCARDED | Segment is discarded. |
| 158 | ERROR_NOT_LOCKED | Segment is not locked. |
| 159 | ERROR_BAD_THREADID_ADDR | Thread-identity address is not valid. |
| 160 | ERROR_BAD_ARGUMENTS | Environment pointer is not valid. |
| 161 | ERROR_BAD_PATHNAME | Path name is not valid. |
| 162 | ERROR_SIGNAL_PENDING | Signal already pending. |
| 163 | ERROR_UNCERTAIN_MEDIA | Error with INT 24 mapping. |
| 164 | ERROR_MAX_THRDS_REACHED | No more process slots. |
| 165 | ERROR_MONITORS_NOT_SUPPORTED | Error with INT 24 mapping. |
| 166 | ERROR_UNC_DRIVER_NOT_INSTALLED | Default redirection return code. |
| 167 | ERROR_LOCK_FAILED | Locking failed. |
| 168 | ERROR_SWAPIO_FAILED | Swap I/O failed. |
| 169 | ERROR_SWAPIN_FAILED | Swap in failed. |
| 170 | ERROR_BUSY | Segment is busy. |
| 171 | Reserved | |
| 172 | Reserved | |
| 173 | ERROR_CANCEL_VIOLATION | A lock request is not outstanding for the specified file range, or the range length is zero. |
| 174 | ERROR_ATOMIC_LOCK_NOT_SUPPORTED | The file-system driver (FSD) does not support atomic lock operations. Versions of OS/2 prior to version 2.00 do not support atomic lock operations. |
| 175 | ERROR_READ_LOCKS_NOT_SUPPORTED | The file system driver (FSD) does not support shared read locks. |
| 176 | Reserved | |
| 177 | Reserved | |
| 178 | Reserved | |
| 179 | Reserved | |
| 180 | ERROR_INVALID_SEGMENT_NUMBER | Segment number is not valid. |
| 181 | ERROR_INVALID_CALLGATE | Call gate is not valid. |
| 182 | ERROR_INVALID_ORDINAL | Ordinal is not valid. |
| 183 | ERROR_ALREADY_EXISTS | Shared segment already exists. |
| 184 | ERROR_NO_CHILD_PROCESS | No child process to wait for. |
| 185 | ERROR_CHILD_ALIVE_NOWAIT | No Wait specified and child alive. |
| 186 | ERROR_INVALID_FLAG_NUMBER | Flag number is not valid. |
| 187 | ERROR_SEM_NOT_FOUND | Semaphore does not exist. |
| 188 | ERROR_INVALID_STARTING_CODESEG | Starting code segment is not valid, incorrect END ( label ) directive. |
| 189 | ERROR_INVALID_STACKSEG | Stack segment is not valid. |
| 190 | ERROR_INVALID_MODULETYPE | Module type is not valid - dynamic-link library file cannot be used as an application. Application cannot be used as a dynamic-link library. |
| 191 | ERROR_INVALID_EXE_SIGNATURE | EXE signature is not valid - file is a DOS mode program or an improper program. |
| 192 | ERROR_EXE_MARKED_INVALID | EXE marked is not valid - link detected errors when the application was created. |
| 193 | ERROR_BAD_EXE_FORMAT | EXE format not valid - file is a DOS mode program or an improper program. |
| 194 | ERROR_ITERATED_DATA_EXCEEDS_64k | Iterated data exceeds 64KB - there is more than 64KB of data in one of the segments of the file. |
| 195 | ERROR_INVALID_MINALLOCSIZE | Minimum allocation size is not valid - the size is specified to be less than the size of the segment data in the file. |
| 196 | ERROR_DYNLINK_FROM_INVALID_RING | Dynamic link from privilege level is not valid - privilege level 2 routine cannot link to dynamic-link libraries. |
| 197 | ERROR_IOPL_NOT_ENABLED | IOPL set to NO in CONFIG.SYS. |
| 198 | ERROR_INVALID_SEGDPL | Segment descriptor privilege level is not valid - can only have privilege levels of 2 and 3. |
| 199 | ERROR_AUTODATASEG_EXCEEDS_64k | Automatic data segment exceeds 64KB. |
200 to 299
| Code | Name | Description |
|---|---|---|
| 200 | ERROR_RING2SEG_MUST_BE_MOVABLE | Privilege level 2 segment must be movable. |
| 201 | ERROR_RELOC_CHAIN_XEEDS_SEGLIM | Relocation chain exceeds segment limit. |
| 202 | ERROR_INFLOOP_IN_RELOC_CHAIN | Infinite loop in relocation chain segment. |
| 203 | ERROR_ENVVAR_NOT_FOUND | Environment variable not found. |
| 204 | ERROR_NOT_CURRENT_CTRY | Not current country. |
| 205 | ERROR_NO_SIGNAL_SENT | No signal sent - no process in the command subtree has a signal handler. |
| 206 | ERROR_FILENAME_EXCED_RANGE | File name or extension is greater than 8.3 characters. |
| 207 | ERROR_RING2_STACK_IN_USE | Privilege level 2 stack is in use. |
| 208 | ERROR_META_EXPANSION_TOO_LONG | Meta (global) expansion is too long. |
| 209 | ERROR_INVALID_SIGNAL_NUMBER | Signal number is not valid. |
| 210 | ERROR_THREAD_1_INACTIVE | Inactive thread. |
| 211 | ERROR_INFO_NOT_AVAIL | File system information is not available for this file. |
| 212 | ERROR_LOCKED | Locked error. |
| 213 | ERROR_BAD_DYNALINK | Attempted to execute a non-family API in DOS mode. |
| 214 | ERROR_TOO_MANY_MODULES | Too many modules. |
| 215 | ERROR_NESTING_NOT_ALLOWED | Nesting is not allowed. |
| 216 | ERROR_CANNOT_SHRINK | System error. |
| 217 | ERROR_ZOMBIE_PROCESS | Zombie process. |
| 218 | ERROR_STACK_IN_HIGH_MEMORY | Stack is in high memory. |
| 219 | ERROR_INVALID_EXITROUTINE_RING | Exit routine ring is not valid. |
| 220 | ERROR_GETBUF_FAILED | Get buffer failed. |
| 221 | ERROR_FLUSHBUF_FAILED | Flush buffer failed. |
| 222 | ERROR_TRANSFER_TOO_LONG | Transfer is too long. |
| 223 | ERROR_FORCENOSWAP_FAILED | System error. |
| 224 | ERROR_SMG_NO_TARGET_WINDOW | The application window was created without the FCF_TASKLIST style, or the application window not yet been created or has already been destroyed. |
| 228 | ERROR_NO_CHILDREN | No child process. |
| 229 | ERROR_INVALID_SCREEN_GROUP | Session is not valid. |
| 230 | ERROR_BAD_PIPE | The pipe is non-existent pipe or the operation is not valid. |
| 231 | ERROR_PIPE_BUSY | Pipe is busy. |
| 232 | ERROR_NO_DATA | No data available on non-blocking read. |
| 233 | ERROR_PIPE_NOT_CONNECTED | Pipe was disconnected by server. |
| 234 | ERROR_MORE_DATA | More data is available. |
| 240 | ERROR_VC_DISCONNECTED | Session was dropped due to errors. |
| 250 | ERROR_CIRCULARITY_REQUESTED | Renaming a directory that would cause a circularity problem. |
| 251 | ERROR_DIRECTORY_IN_CDS | Renaming a directory that is in use. |
| 252 | ERROR_INVALID_FSD_NAME | Trying to access an FSD that is not valid. |
| 253 | ERROR_INVALID_PATH | Pseudo device is not valid. |
| 254 | ERROR_INVALID_EA_NAME | Character in name or cbName is not valid. |
| 255 | ERROR_EA_LIST_INCONSISTENT | List does not match its size, or there are EAs that are not valid in the list. |
| 256 | ERROR_EA_LIST_TOO_LONG | FEAList is longer than 64K-1 bytes. |
| 257 | ERROR_NO_META_MATCH | String does not match expression. |
| 258 | ERROR_FINDNOTIFY_TIMEOUT | System error. |
| 259 | ERROR_NO_MORE_ITEMS | DosQueryFSAttach ordinal query. |
| 260 | ERROR_SEARCH_STRUC_REUSED | DOS mode findfirst/next search structure reused. |
| 261 | ERROR_CHAR_NOT_FOUND | Character not found. |
| 262 | ERROR_TOO_MUCH_STACK | Stack request exceeds system limit. |
| 263 | ERROR_INVALID_ATTR | Attribute is not valid. |
| 264 | ERROR_INVALID_STARTING_RING | Starting ring is not valid. |
| 265 | ERROR_INVALID_DLL_INIT_RING | DLL INIT ring is not valid. |
| 266 | ERROR_CANNOT_COPY | Cannot copy. |
| 267 | ERROR_DIRECTORY | Used by DOSCOPY in doscall1. |
| 268 | ERROR_OPLOCKED_FILE | Oplocked file. |
| 269 | ERROR_OPLOCK_THREAD_EXISTS | Oplock thread exists. |
| 270 | ERROR_VOLUME_CHANGED | Volume changed. |
| 271 | ERROR_FINDNOTIFY_HANDLE_IN_USE | Handle in use. |
| 272 | ERROR_FINDNOTIFY_HANDLE_CLOSED | Handle closed. |
| 273 | ERROR_NOTIFY_OBJECT_REMOVED | Object removed. |
| 274 | ERROR_ALREADY_SHUTDOWN | System is already shut down. |
| 275 | ERROR_EAS_DIDNT_FIT | Buffer is not big enough to hold the EAs. |
| 276 | ERROR_EA_FILE_CORRUPT | EA file has been damaged. |
| 277 | ERROR_EA_TABLE_FULL | EA table is full. |
| 278 | ERROR_INVALID_EA_HANDLE | EA handle is not valid. |
| 279 | ERROR_NO_CLUSTER | No cluster. |
| 280 | ERROR_CREATE_EA_FILE | Cannot create the EA file. |
| 281 | ERROR_CANNOT_OPEN_EA_FILE | Cannot open the EA file. |
| 282 | ERROR_EAS_NOT_SUPPORTED | Destination file system does not support EAs. |
| 283 | ERROR_NEED_EAS_FOUND | Destination file system does not support EAs, and the source file's EAs contain a need EA. |
| 284 | ERROR_DUPLICATE_HANDLE | The handle already exists. |
| 285 | ERROR_DUPLICATE_NAME | The name already exists. |
| 286 | ERROR_EMPTY_MUXWAIT | The list of semaphores in a muxwait semaphore is empty. |
| 287 | ERROR_MUTEX_OWNED | The calling thread owns one or more of the mutex semaphores in the list. |
| 288 | ERROR_NOT_OWNER | Caller does not own the semaphore. |
| 289 | ERROR_PARAM_TOO_SMALL | Parameter is not large enough to contain all of the semaphore records in the muxwait semaphore. |
| 290 | ERROR_TOO_MANY_HANDLES | Limit reached for number of handles. |
| 291 | ERROR_TOO_MANY_OPENS | There are too many files or semaphores open. |
| 292 | ERROR_WRONG_TYPE | Attempted to create wrong type of semaphore. |
| 293 | ERROR_UNUSED_CODE | Code is not used. |
| 294 | ERROR_THREAD_NOT_TERMINATED | Thread has not ended. |
| 295 | ERROR_INIT_ROUTINE_FAILED | Initialization routine failed. |
| 296 | ERROR_MODULE_IN_USE | Module is in use. |
| 297 | ERROR_NOT_ENOUGH_WATCHPOINTS | There are not enough watchpoints. |
| 298 | ERROR_TOO_MANY_POSTS | Post count limit was reached for an event semaphore. |
| 299 | ERROR_ALREADY_POSTED | Event semaphore is already posted. |
300 to 399
| Code | Name | Description |
|---|---|---|
| 300 | ERROR_ALREADY_RESET | Event semaphore is already reset. |
| 301 | ERROR_SEM_BUSY | Semaphore is busy. |
| 302 | Reserved | |
| 303 | ERROR_INVALID_PROCID | Process identity is not valid. |
| 304 | ERROR_INVALID_PDELTA | Priority delta is not valid. |
| 305 | ERROR_NOT_DESCENDANT | Not descendant. |
| 306 | ERROR_NOT_SESSION_MANAGER | Requestor not session manager. |
| 307 | ERROR_INVALID_PCLASS | P class is not valid. |
| 308 | ERROR_INVALID_SCOPE | Scope is not valid. |
| 309 | ERROR_INVALID_THREADID | Thread identity is not valid. |
| 310 | ERROR_DOSSUB_SHRINK | Cannot shrink segment - DosSubSetMem. |
| 311 | ERROR_DOSSUB_NOMEM | No memory to satisfy request - DosSubAllocMem. |
| 312 | ERROR_DOSSUB_OVERLAP | Overlap of the specified block with a block of allocated memory - DosSubFreeMem. |
| 313 | ERROR_DOSSUB_BADSIZE | Size parameter is not valid - DosSubAllocMem or DosSubFreeMem. |
| 314 | ERROR_DOSSUB_BADFLAG | Flag parameter is not valid - DosSubSetMem. |
| 315 | ERROR_DOSSUB_BADSELECTOR | Segment selector is not valid. |
| 316 | ERROR_MR_MSG_TOO_LONG | Message too long for buffer. |
| 317 | ERROR_MR_MID_NOT_FOUND | Message identity number not found. |
| 318 | ERROR_MR_UN_ACC_MSGF | Unable to access message file. |
| 319 | ERROR_MR_INV_MSGF_FORMAT | Message file format is not valid. |
| 320 | ERROR_MR_INV_IVCOUNT | Insertion variable count is not valid. |
| 321 | ERROR_MR_UN_PERFORM | Unable to perform function. |
| 322 | ERROR_TS_WAKEUP | Unable to wake up. |
| 323 | ERROR_TS_SEMHANDLE | System semaphore is not valid. |
| 324 | ERROR_TS_NOTIMER | No timers available. |
| 326 | ERROR_TS_HANDLE | Timer handle is not valid. |
| 327 | ERROR_TS_DATETIME | Date or time is not valid. |
| 328 | ERROR_SYS_INTERNAL | Internal system error. |
| 329 | ERROR_QUE_CURRENT_NAME | Current queue name does not exist. |
| 330 | ERROR_QUE_PROC_NOT_OWNED | Current process does not own queue. |
| 331 | ERROR_QUE_PROC_OWNED | Current process owns queue. |
| 332 | ERROR_QUE_DUPLICATE | Duplicate queue name. |
| 333 | ERROR_QUE_ELEMENT_NOT_EXIST | Queue element does not exist. |
| 334 | ERROR_QUE_NO_MEMORY | Inadequate queue memory. For DosOpenQueue, DosCreateQueue, and DosWriteQueue, the following applies: These calls use a system-wide pool of memory. Every DosOpenQueue and DosCreateQueue uses up 34 bytes of memory, which is freed on close. Every DosWriteQueue uses 24 bytes of memory, which is freed on read. If too many elements are written to queues, further opens, creates, reads, or writes fail with this error code. |
| 335 | ERROR_QUE_INVALID_NAME | Queue name is not valid. |
| 336 | ERROR_QUE_INVALID_PRIORITY | Queue priority parameter is not valid. |
| 337 | ERROR_QUE_INVALID_HANDLE | Queue handle is not valid. |
| 338 | ERROR_QUE_LINK_NOT_FOUND | Queue link not found. |
| 339 | ERROR_QUE_MEMORY_ERROR | Queue memory error. |
| 340 | ERROR_QUE_PREV_AT_END | Previous queue element was at end of queue. |
| 341 | ERROR_QUE_PROC_NO_ACCESS | Process does not have access to queues. |
| 342 | ERROR_QUE_EMPTY | Queue is empty. |
| 343 | ERROR_QUE_NAME_NOT_EXIST | Queue name does not exist. |
| 344 | ERROR_QUE_NOT_INITIALIZED | Queues not initialized. |
| 345 | ERROR_QUE_UNABLE_TO_ACCESS | Unable to access queues. |
| 346 | ERROR_QUE_UNABLE_TO_ADD | Unable to add new queue. |
| 347 | ERROR_QUE_UNABLE_TO_INIT | Unable to initialize queues. |
| 349 | ERROR_VIO_INVALID_MASK | Function replace is not valid. |
| 350 | ERROR_VIO_PTR | Pointer to parameter is not valid. |
| 351 | ERROR_VIO_APTR | Pointer to attribute is not valid. |
| 352 | ERROR_VIO_RPTR | Pointer to row is not valid. |
| 353 | ERROR_VIO_CPTR | Pointer to column is not valid. |
| 354 | ERROR_VIO_LPTR | Pointer to length is not valid. |
| 355 | ERROR_VIO_MODE | Unsupported screen mode. |
| 356 | ERROR_VIO_WIDTH | Cursor width value is not valid. |
| 357 | ERROR_VIO_ATTR | Cursor attribute value is not valid. |
| 358 | ERROR_VIO_ROW | Row value is not valid. |
| 359 | ERROR_VIO_COL | Column value is not valid. |
| 360 | ERROR_VIO_TOPROW | Top Row value is not valid. |
| 361 | ERROR_VIO_BOTROW | Bot Row value is not valid. |
| 362 | ERROR_VIO_RIGHTCOL | Right column value is not valid. |
| 363 | ERROR_VIO_LEFTCOL | Left column value is not valid. |
| 364 | ERROR_SCS_CALL | Call issued by other than session manager. |
| 365 | ERROR_SCS_VALUE | Value is not for save or restore. |
| 366 | ERROR_VIO_WAIT_FLAG | Wait flag setting is not valid. |
| 367 | ERROR_VIO_UNLOCK | Screen not previously locked. |
| 368 | ERROR_SGS_NOT_SESSION_MGR | Caller not session manager. |
| 369 | ERROR_SMG_INVALID_SGID | Session identity is not valid. |
| 369 | ERROR_SMG_INVALID_SESSION_ID | Session ID is not valid. |
| 370 | ERROR_SMG_NOSG | No sessions available. |
| 370 | ERROR_SMG_NO_SESSIONS | No sessions available. |
| 371 | ERROR_SMG_GRP_NOT_FOUND | Session not found. |
| 371 | ERROR_SMG_SESSION_NOT_FOUND | Session not found. |
| 372 | ERROR_SMG_SET_TITLE | Title sent by shell or parent cannot be changed. |
| 373 | ERROR_KBD_PARAMETER | Parameter to keyboard is not valid. |
| 374 | ERROR_KBD_NO_DEVICE | No device. |
| 375 | ERROR_KBD_INVALID_IOWAIT | I/O wait specified is not valid. |
| 376 | ERROR_KBD_INVALID_LENGTH | Length for keyboard is not valid. |
| 377 | ERROR_KBD_INVALID_ECHO_MASK | Echo mode mask is not valid. |
| 378 | ERROR_KBD_INVALID_INPUT_MASK | Input mode mask is not valid. |
| 379 | ERROR_MON_INVALID_PARMS | One or more parameters to DosMon is not valid. |
| 380 | ERROR_MON_INVALID_DEVNAME | Device name string is not valid. |
| 381 | ERROR_MON_INVALID_HANDLE | Device handle is not valid. |
| 382 | ERROR_MON_BUFFER_TOO_SMALL | Buffer too small. |
| 383 | ERROR_MON_BUFFER_EMPTY | Buffer is empty. |
| 384 | ERROR_MON_DATA_TOO_LARGE | Data record is too large. |
| 385 | ERROR_MOUSE_NO_DEVICE | Mouse device closed; the device handle is not valid. |
| 386 | ERROR_MOUSE_INV_HANDLE | Mouse device closed; the device handle is not valid. |
| 387 | ERROR_MOUSE_INV_PARMS | Parameters for display mode are not valid. |
| 388 | ERROR_MOUSE_CANT_RESET | Function assigned and cannot be reset. |
| 389 | ERROR_MOUSE_DISPLAY_PARMS | Parameters for display mode are not valid. |
| 390 | ERROR_MOUSE_INV_MODULE | Module not valid. |
| 391 | ERROR_MOUSE_INV_ENTRY_PT | Entry point not valid. |
| 392 | ERROR_MOUSE_INV_MASK | Function mask is not valid. |
| 393 | NO_ERROR_MOUSE_NO_DATA | No valid data. |
| 394 | NO_ERROR_MOUSE_PTR_DRAWN | Pointer drawn. |
| 395 | ERROR_INVALID_FREQUENCY | Frequency for beep is not valid. |
| 396 | ERROR_NLS_NO_COUNTRY_FILE | Cannot find COUNTRY.SYS file. |
| 397 | ERROR_NLS_OPEN_FAILED | Cannot open COUNTRY.SYS file. |
| 398 | ERROR_NLS_NO_CTRY_CODE | Country code not found. |
| 398 | ERROR_NO_COUNTRY_OR_CODEPAGE | Country code not found. |
| 399 | ERROR_NLS_TABLE_TRUNCATED | Table returned information truncated, buffer is too small. |
400 to 499
| Code | Name | Description |
|---|---|---|
| 400 | ERROR_NLS_BAD_TYPE | Selected type does not exist. |
| 401 | ERROR_NLS_TYPE_NOT_FOUND | Selected type is not in file. |
| 402 | ERROR_VIO_SMG_ONLY | Valid from session manager only. |
| 403 | ERROR_VIO_INVALID_ASCIIZ | ASCIIZ length is not valid. |
| 404 | ERROR_VIO_DEREGISTER | VioDeRegister not allowed. |
| 405 | ERROR_VIO_NO_POPUP | Pop-up window not allocated. |
| 406 | ERROR_VIO_EXISTING_POPUP | Pop-up window on screen (NoWait). |
| 407 | ERROR_KBD_SMG_ONLY | Valid from session manager only. |
| 408 | ERROR_KBD_INVALID_ASCIIZ | ASCIIZ length is not valid. |
| 409 | ERROR_KBD_INVALID_MASK | Replacement mask is not valid. |
| 410 | ERROR_KBD_REGISTER | KbdRegister not allowed. |
| 411 | ERROR_KBD_DEREGISTER | KbdDeRegister not allowed. |
| 412 | ERROR_MOUSE_SMG_ONLY | Valid from session manager only. |
| 413 | ERROR_MOUSE_INVALID_ASCIIZ | ASCIIZ length is not valid. |
| 414 | ERROR_MOUSE_INVALID_MASK | Replacement mask is not valid. |
| 415 | ERROR_MOUSE_REGISTER | Mouse register not allowed. |
| 416 | ERROR_MOUSE_DEREGISTER | Mouse deregister not allowed. |
| 417 | ERROR_SMG_BAD_ACTION | Action specified is not valid. |
| 418 | ERROR_SMG_INVALID_CALL | INIT called more than once, or the session identity is not valid. |
| 419 | ERROR_SCS_SG_NOTFOUND | New session number. |
| 420 | ERROR_SCS_NOT_SHELL | Caller is not shell. |
| 421 | ERROR_VIO_INVALID_PARMS | Parameters passed are not valid. |
| 422 | ERROR_VIO_FUNCTION_OWNED | Save/restore already owned. |
| 423 | ERROR_VIO_RETURN | Non-destruct return (undo). |
| 424 | ERROR_SCS_INVALID_FUNCTION | Caller function is not valid. |
| 425 | ERROR_SCS_NOT_SESSION_MGR | Caller not session manager. |
| 426 | ERROR_VIO_REGISTER | Vio register not allowed. |
| 427 | ERROR_VIO_NO_MODE_THREAD | No mode restore thread in SG. |
| 428 | ERROR_VIO_NO_SAVE_RESTORE_THD | No save/restore thread in SG. |
| 429 | ERROR_VIO_IN_BG | Function in background is not valid. |
| 430 | ERROR_VIO_ILLEGAL_DURING_POPUP | Function not allowed during pop-up window. |
| 431 | ERROR_SMG_NOT_BASESHELL | Caller is not the base shell. |
| 432 | ERROR_SMG_BAD_STATUSREQ | Status requested is not valid. |
| 433 | ERROR_QUE_INVALID_WAIT | NoWait parameter out of bounds. |
| 434 | ERROR_VIO_LOCK | Error returned from Scroll Lock. |
| 435 | ERROR_MOUSE_INVALID_IOWAIT | Parameters for IOWait are not valid. |
| 436 | ERROR_VIO_INVALID_HANDLE | VIO handle is not valid. |
| 437 | ERROR_VIO_ILLEGAL_DURING_LOCK | Function not allowed during screen lock. |
| 438 | ERROR_VIO_INVALID_LENGTH | VIO length is not valid. |
| 439 | ERROR_KBD_INVALID_HANDLE | KBD handle is not valid. |
| 440 | ERROR_KBD_NO_MORE_HANDLE | Ran out of handles. |
| 441 | ERROR_KBD_CANNOT_CREATE_KCB | Unable to create kcb. |
| 442 | ERROR_KBD_CODEPAGE_LOAD_INCOMPL | Unsuccessful code-page load. |
| 443 | ERROR_KBD_INVALID_CODEPAGE_ID | Code page identity is not valid. |
| 444 | ERROR_KBD_NO_CODEPAGE_SUPPORT | No code page support. |
| 445 | ERROR_KBD_FOCUS_REQUIRED | Keyboard focus required. |
| 446 | ERROR_KBD_FOCUS_ALREADY_ACTIVE | Calling thread has an outstanding focus. |
| 447 | ERROR_KBD_KEYBOARD_BUSY | Keyboard is busy. |
| 448 | ERROR_KBD_INVALID_CODEPAGE | Code page is not valid. |
| 449 | ERROR_KBD_UNABLE_TO_FOCUS | Focus attempt failed. |
| 450 | ERROR_SMG_SESSION_NON_SELECT | Session is not selectable. |
| 451 | ERROR_SMG_SESSION_NOT_FOREGRND | Parent / child session is not foreground. |
| 452 | ERROR_SMG_SESSION_NOT_PARENT | Not parent of requested child. |
| 453 | ERROR_SMG_INVALID_START_MODE | Session start mode is not valid. |
| 454 | ERROR_SMG_INVALID_RELATED_OPT | Session start related option is not valid. |
| 455 | ERROR_SMG_INVALID_BOND_OPTION | Session bond option is not valid. |
| 456 | ERROR_SMG_INVALID_SELECT_OPT | Session select option is not valid. |
| 457 | ERROR_SMG_START_IN_BACKGROUND | Session started in background. |
| 458 | ERROR_SMG_INVALID_STOP_OPTION | Session stop option is not valid. |
| 459 | ERROR_SMG_BAD_RESERVE | Reserved parameters are not zero. |
| 460 | ERROR_SMG_PROCESS_NOT_PARENT | Session parent process already exists. |
| 461 | ERROR_SMG_INVALID_DATA_LENGTH | Data length is not valid. |
| 462 | ERROR_SMG_NOT_BOUND | Parent is not bound. |
| 463 | ERROR_SMG_RETRY_SUB_ALLOC | Retry request block allocation. |
| 464 | ERROR_KBD_DETACHED | This call is not allowed for a detached PID. |
| 465 | ERROR_VIO_DETACHED | This call is not allowed for a detached PID. |
| 466 | ERROR_MOU_DETACHED | This call is not allowed for a detached PID. |
| 467 | ERROR_VIO_FONT | No font is available to support the mode. |
| 468 | ERROR_VIO_USER_FONT | User font is active. |
| 469 | ERROR_VIO_BAD_CP | Codepage specified is not valid. |
| 470 | ERROR_VIO_NO_CP | System displays do not support codepage. |
| 471 | ERROR_VIO_NA_CP | Current display does not support codepage. |
| 472 | ERROR_INVALID_CODE_PAGE | Codepage is not valid. |
| 473 | ERROR_CPLIST_TOO_SMALL | Codepage list is too small. |
| 474 | ERROR_CP_NOT_MOVED | Codepage was not moved. |
| 475 | ERROR_MODE_SWITCH_INIT | Mode switch initialization error. |
| 476 | ERROR_CODE_PAGE_NOT_FOUND | Codepage was not found. |
| 477 | ERROR_UNEXPECTED_SLOT_RETURNED | Internal error. |
| 478 | ERROR_SMG_INVALID_TRACE_OPTION | Start session trace indicator is not valid. |
| 479 | ERROR_VIO_INTERNAL_RESOURCE | VIO internal resource error. |
| 480 | ERROR_VIO_SHELL_INIT | VIO shell initialization error. |
| 481 | ERROR_SMG_NO_HARD_ERRORS | No session manager hard errors. |
| 482 | ERROR_CP_SWITCH_INCOMPLETE | DosSetProcessCp is unable to set a KBD or VIO codepage. |
| 483 | ERROR_VIO_TRANSPARENT_POPUP | Error during VIO pop-up window. |
| 484 | ERROR_CRITSEC_OVERFLOW | Critical section overflow. |
| 485 | ERROR_CRITSEC_UNDERFLOW | Critical section underflow. |
| 486 | ERROR_VIO_BAD_RESERVE | Reserved parameter is not zero. |
| 487 | ERROR_INVALID_ADDRESS | Physical address is not valid. |
| 488 | ERROR_ZERO_SELECTORS_REQUESTED | At least one selector must be requested. |
| 489 | ERROR_NOT_ENOUGH_SELECTORS_AVA | Not enough GDT selectors to satisfy request. |
| 490 | ERROR_INVALID_SELECTOR | GDT selector is not valid. |
| 491 | ERROR_SMG_INVALID_PROGRAM_TYPE | Program type is not valid. |
| 492 | ERROR_SMG_INVALID_PGM_CONTROL | Program control is not valid. |
| 493 | ERROR_SMG_INVALID_INHERIT_OPT | Inherit option is not valid. |
| 494 | ERROR_VIO_EXTENDED_SG | |
| 495 | ERROR_VIO_NOT_PRES_MGR_SG | |
| 496 | ERROR_VIO_SHIELD_OWNED | |
| 497 | ERROR_VIO_NO_MORE_HANDLES | |
| 498 | ERROR_VIO_SEE_ERROR_LOG | |
| 499 | ERROR_VIO_ASSOCIATED_DC |
500 to 599
| Code | Name | Description |
|---|---|---|
| 500 | ERROR_KBD_NO_CONSOLE | |
| 501 | ERROR_MOUSE_NO_CONSOLE | |
| 502 | ERROR_MOUSE_INVALID_HANDLE | |
| 503 | ERROR_SMG_INVALID_DEBUG_PARMS | |
| 504 | ERROR_KBD_EXTENDED_SG | |
| 505 | ERROR_MOU_EXTENDED_SG | |
| 506 | ERROR_SMG_INVALID_ICON_FILE | |
| 507 | ERROR_TRC_PID_NON_EXISTENT | |
| 508 | ERROR_TRC_COUNT_ACTIVE | |
| 509 | ERROR_TRC_SUSPENDED_BY_COUNT | |
| 510 | ERROR_TRC_COUNT_INACTIVE | |
| 511 | ERROR_TRC_COUNT_REACHED | |
| 512 | ERROR_NO_MC_TRACE | |
| 513 | ERROR_MC_TRACE | |
| 514 | ERROR_TRC_COUNT_ZERO | |
| 515 | ERROR_SMG_TOO_MANY_DDS | |
| 516 | ERROR_SMG_INVALID_NOTIFICATION | |
| 517 | ERROR_LF_INVALID_FUNCTION | |
| 518 | ERROR_LF_NOT_AVAIL | |
| 519 | ERROR_LF_SUSPENDED | |
| 520 | ERROR_LF_BUF_TOO_SMALL | |
| 521 | ERROR_LF_BUFFER_CORRUPTED | |
| 521 | ERROR_LF_BUFFER_FULL | |
| 522 | ERROR_LF_INVALID_DAEMON | |
| 522 | ERROR_LF_INVALID_RECORD | |
| 523 | ERROR_LF_INVALID_TEMPL | |
| 523 | ERROR_LF_INVALID_SERVICE | |
| 524 | ERROR_LF_GENERAL_FAILURE | |
| 525 | ERROR_LF_INVALID_ID | |
| 526 | ERROR_LF_INVALID_HANDLE | |
| 527 | ERROR_LF_NO_ID_AVAIL | |
| 528 | ERROR_LF_TEMPLATE_AREA_FULL | |
| 529 | ERROR_LF_ID_IN_USE | |
| 530 | ERROR_MOU_NOT_INITIALIZED | |
| 531 | ERROR_MOUINITREAL_DONE | |
| 532 | ERROR_DOSSUB_CORRUPTED | |
| 533 | ERROR_MOUSE_CALLER_NOT_SUBSYS | |
| 534 | ERROR_ARITHMETIC_OVERFLOW | |
| 535 | ERROR_TMR_NO_DEVICE | |
| 536 | ERROR_TMR_INVALID_TIME | |
| 537 | ERROR_PVW_INVALID_ENTITY | |
| 538 | ERROR_PVW_INVALID_ENTITY_TYPE | |
| 539 | ERROR_PVW_INVALID_SPEC | |
| 540 | ERROR_PVW_INVALID_RANGE_TYPE | |
| 541 | ERROR_PVW_INVALID_COUNTER_BLK | |
| 542 | ERROR_PVW_INVALID_TEXT_BLK | |
| 543 | ERROR_PRF_NOT_INITIALIZED | |
| 544 | ERROR_PRF_ALREADY_INITIALIZED | |
| 545 | ERROR_PRF_NOT_STARTED | |
| 546 | ERROR_PRF_ALREADY_STARTED | |
| 547 | ERROR_PRF_TIMER_OUT_OF_RANGE | |
| 548 | ERROR_PRF_TIMER_RESET | |
| 549 | Reserved | |
| 550 | Reserved | |
| 551 | Reserved | |
| 552 | Reserved | |
| 553 | Reserved | |
| 554 | Reserved | |
| 555 | Reserved | |
| 556 | Reserved | |
| 557 | Reserved | |
| 558 | Reserved | |
| 559 | Reserved | |
| 560 | Reserved | |
| 561 | Reserved | |
| 562 | Reserved | |
| 563 | Reserved | |
| 564 | Reserved | |
| 565 | Reserved | |
| 566 | Reserved | |
| 567 | Reserved | |
| 568 | Reserved | |
| 569 | Reserved | |
| 570 | Reserved | |
| 571 | Reserved | |
| 572 | Reserved | |
| 573 | Reserved | |
| 574 | Reserved | |
| 575 | Reserved | |
| 576 | Reserved | |
| 577 | Reserved | |
| 578 | Reserved | |
| 579 | Reserved | |
| 580 | Reserved | |
| 581 | Reserved | |
| 582 | Reserved | |
| 583 | Reserved | |
| 584 | Reserved | |
| 585 | Reserved | |
| 586 | Reserved | |
| 587 | Reserved | |
| 588 | Reserved | |
| 589 | Reserved | |
| 590 | Reserved | |
| 591 | Reserved | |
| 592 | Reserved | |
| 593 | Reserved | |
| 594 | Reserved | |
| 595 | Reserved | |
| 596 | Reserved | |
| 597 | Reserved | |
| 598 | Reserved | |
| 599 | Reserved |
600 to 1999
- 600-638 Reserved.
- 639 ERROR_VDD_LOCK_USEAGE_DENIED
- 640 ERROR_TIMEOUT
- 641 ERROR_VDM_DOWN
- 642 ERROR_VDM_LIMIT
- 643 ERROR_VDD_NOT_FOUND
- 644 ERROR_INVALID_CALLER
- 645 ERROR_PID_MISMATCH
- 646 ERROR_INVALID_VDD_HANDLE
- 647 ERROR_VLPT_NO_SPOOLER
- 648 ERROR_VCOM_DEVICE_BUSY
- 649 ERROR_VLPT_DEVICE_BUSY
- 650 ERROR_NESTING_TOO_DEEP
- 651 ERROR_VDD_MISSING
- 691 ERROR_IMP_INVALID_PARM
- 692 ERROR_IMP_INVALID_LENGTH
- 693 MSG_HPFS_DISK_ERROR_WARN
| Code | Name | Description |
|---|---|---|
| 600-638 | Reserved | |
| 639 | ERROR_VDD_LOCK_USEAGE_DENIED | |
| 640 | ERROR_TIMEOUT | |
| 641 | ERROR_VDM_DOWN | |
| 642 | ERROR_VDM_LIMIT | |
| 643 | ERROR_VDD_NOT_FOUND | |
| 644 | ERROR_INVALID_CALLER | |
| 645 | ERROR_PID_MISMATCH | |
| 646 | ERROR_INVALID_VDD_HANDLE | |
| 647 | ERROR_VLPT_NO_SPOOLER | |
| 648 | ERROR_VCOM_DEVICE_BUSY | |
| 649 | ERROR_VLPT_DEVICE_BUSY | |
| 650 | ERROR_NESTING_TOO_DEEP | |
| 651 | ERROR_VDD_MISSING | |
| 691 | ERROR_IMP_INVALID_PARM | |
| 692 | ERROR_IMP_INVALID_LENGTH | |
| 693 | MSG_HPFS_DISK_ERROR_WARN | |
| 730 | ERROR_MON_BAD_BUFFER | |
| 731 | ERROR_MODULE_CORRUPTED | |
| 732-1476 | Reserved | |
| 1477 | ERROR_SM_OUTOF_SWAPFILE | |
| 1478-1999 | Reserved |
2000 to 59999
- 2000-2054 Reserved.
- 2055 ERROR_LF_TIMEOUT
- 2057 ERROR_LF_SUSPEND_SUCCESS
- 2058 ERROR_LF_RESUME_SUCCESS
- 2059 ERROR_LF_REDIRECT_SUCCESS
- 2060 ERROR_LF_REDIRECT_FAILURE
- 32768 ERROR_SWAPPER_NOT_ACTIVE
- 32769 ERROR_INVALID_SWAPID
- 32770 ERROR_IOERR_SWAP_FILE
- 32771 ERROR_SWAP_TABLE_FULL
- 32772 ERROR_SWAP_FILE_FULL
- 32773 ERROR_CANT_INIT_SWAPPER
- 32774 ERROR_SWAPPER_ALREADY_INIT
- 32775 ERROR_PMM_INSUFFICIENT_MEMORY
- 32776 ERROR_PMM_INVALID_FLAGS
- 32777 ERROR_PMM_INVALID_ADDRESS
- 32778 ERROR_PMM_LOCK_FAILED
- 32779 ERROR_PMM_UNLOCK_FAILED
- 32780 ERROR_PMM_MOVE_INCOMPLETE
- 32781 ERROR_UCOM_DRIVE_RENAMED
- 32782 ERROR_UCOM_FILENAME_TRUNCATED
- 32783 ERROR_UCOM_BUFFER_LENGTH
- 32784 ERROR_MON_CHAIN_HANDLE
- 32785 ERROR_MON_NOT_REGISTERED
- 32786 ERROR_SMG_ALREADY_TOP
- 32787 ERROR_PMM_ARENA_MODIFIED
- 32788 ERROR_SMG_PRINTER_OPEN
- 32789 ERROR_PMM_SET_FLAGS_FAILED
- 32790 ERROR_INVALID_DOS_DD
- 32791 ERROR_BLOCKED
- 32792 ERROR_NOBLOCK
- 32793 ERROR_INSTANCE_SHARED
- 32794 ERROR_NO_OBJECT
- 32795 ERROR_PARTIAL_ATTACH
- 32796 ERROR_INCACHE
- 32797 ERROR_SWAP_IO_PROBLEMS
- 32798 ERROR_CROSSES_OBJECT_BOUNDARY
- 32799 ERROR_LONGLOCK
- 32800 ERROR_SHORTLOCK
- 32801 ERROR_UVIRTLOCK
- 32802 ERROR_ALIASLOCK
- 32803 ERROR_ALIAS
- 32804 ERROR_NO_MORE_HANDLES
- 32805 ERROR_SCAN_TERMINATED
- 32806 ERROR_TERMINATOR_NOT_FOUND
- 32807 ERROR_NOT_DIRECT_CHILD
- 32808 ERROR_DELAY_FREE
- 32809 ERROR_GUARDPAGE
- 32900 ERROR_SWAPERROR
- 32901 ERROR_LDRERROR
- 32902 ERROR_NOMEMORY
- 32903 ERROR_NOACCESS
- 32904 ERROR_NO_DLL_TERM
- 32905-59999 Reserved.
60000 to 65079
- 60000-65025 Reserved.
- 65026 ERROR_CPSIO_CODE_PAGE_INVALID
- 65027 ERROR_CPSIO_NO_SPOOLER
- 65028 ERROR_CPSIO_FONT_ID_INVALID
- 65029-65032 Reserved.
- 65033 ERROR_CPSIO_INTERNAL_ERROR
- 65034 ERROR_CPSIO_INVALID_PTR_NAME
- 65035-65036 Reserved.
- 65037 ERROR_CPSIO_NOT_ACTIVE
- 65038 Reserved.
- 65039 ERROR_CPSIO_PID_FULL
- 65040 ERROR_CPSIO_PID_NOT_FOUND
- 65041-65042 Reserved.
- 65043 ERROR_CPSIO_READ_CTL_SEQ
- 65044 Reserved.
- 65045 ERROR_CPSIO_READ_FNT_DEF
- 65046 Reserved.
- 65047 ERROR_CPSIO_WRITE_ERROR
- 65048 ERROR_CPSIO_WRITE_FULL_ERROR
- 65049 ERROR_CPSIO_WRITE_HANDLE_BAD
- 65050-65073 Reserved.
- 65074 ERROR_CPSIO_SWIT_LOAD
- 65075-65076 Reserved.
- 65077 ERROR_CPSIO_INV_COMMAND
- 65078 ERROR_CPSIO_NO_FONT_SWIT
- 65079 ERROR_ENTRY_IS_CALLGATE