IBMIDECD.FLT
This filter driver makes your IDE CD-ROM drive visible to OS/2. Support for ATAPI CD-ROM drives attached to an IDE Port. Superseded by IBMATAPI.FLT Version 10.085.
Version
| Date | Version | Size | Comments |
|---|---|---|---|
| 1995-10-30 | 8.157 | 20,358 bytes | |
| 1998-04-20 | 9.23 | 24,080 bytes | |
| 10.047 | IDE CD-RW support | ||
| 2002-10-08 | 10.085 | 39,416 bytes | Extended Warm Swap Support |
| 2003-01-17 | 10.095 | 24,652 bytes |
CONFIG.SYS Information
This filter driver makes IDE CD-ROM drives visible to OS/2. Support for ATAPI CD-ROM drives attached to an IDE Port. Superseded by IBMATAPI.FLT V 10.085. It is important to use IBMIDECD.FLT with the IBM1S506.ADD driver. Since Ver. 10.047 IDE CD-Writers for reading/writing are supported. Note: To get CD-ROM support in OS/2 you must also install IBM1S506.ADD and OS2CDROM.DMD.
BASEDEV=IBMIDECD.FLT <parameter>
Parameters
- /V
- Displays some information during the boot.
- /C
- IBMATAPI.FLT and IBMIDECD.FLT have been modified so that they no longer fill the request's S/G list with 0's for the commands without data transfer phase, even if the particular command contains a valid S/G list. To avoid possible unforeseen compatibility problems with older drivers, /C parameter disables this new behaviour.
| Product Support | |
|---|---|
| OS/2 1.3 | |
| OS/2 2.0 | |
| OS/2 2.1 | C |
| OS/2 2.11 SMP | C |
| OS/2 Warp 3 | S |
| OS/2 Warp Connect | S |
| OS/2 Warp 4 | S |
| OS/2 Warp Server for e-Business | S |