DC1368.ADD
Dawicontrol DC-1368 Parallel to SCSI Adapter
BASEDEV=DC1368.ADD
Parameters
- /S[=ID-List]
- Forces Safe transfermode. Optionally you can specify the target id's, otherwise this parameter is valid for all targets.
- Examples:
- /S ;forces safe mode for all targets
- /S=0,1,2,3 ;forces safe mode for target-id's 0,1,2 and 3
- /S=0;1;2;3 ;same as above
- /S=0123 ;same as above
- /S:0123 ;same as above
- /S=0,1;23 ;same as above
- /U[=ID-List]
- Forces Uni-Directional transfermode. Optionally you can specify the target id's, otherwise this parameter is valid for all targets.
- /B[=ID-List]
- Forces Bi-Directional transfermode. Optionally you can specify the target id's, otherwise this parameter is valid for all targets.
- /US[=ID-List]
- Forces Uni-Directional Safe transfermode. Optionally you can specify the target id's, otherwise this parameter is valid for all targets.
- /BS[=ID-List]
- Forces Bi-Directional Safe transfermode. Optionally you can specify the target id's, otherwise this parameter is valid for all targets.
- /EPP8[=ID-List]
- Forces EPP-Byte mode. This parameter can help to solve problems related to some EPP port hardware. Optionally you can specify the target-id's, otherwise this parameter is valid for all targets.
- /PORT=xxx
- xxx=378, 278 or 3BC, this parameter selects the I/O address the driver should use. Normaly you don't need this parameter, because the driver automatically detects the port, where the SCSI cable is connected. If the driver fails to do this or in case of conflict with other adapter cards this parameter will force the driver to check only the given port address.
| OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
|---|---|---|---|
| Yes | Yes | Yes | Yes |