TRIOS2.ADD

Triones Bus Master EIDE/ATAPI Device Driver.

BASEDEV=TRIOS2.ADD    [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]]

Parameters

• V

Indicates to display verbose information.

• drive

Specifies which drive to override on. It can be:

               PM  primary/master
               PS  primary/slave
               SM  secondary/master
               SS  secondary/slave

dmamode specifies the overriding DMA mode. It can be:

               SW2 single word DMA mode 2
               MW1 multi-word DMA mode 1
               MW2 multi-word DMA mode 2
               NO   not use DMA operation. The PIO will be used.

piomode specifies the overriding PIO mode. It can be:

               0   PIO mode 0
               1   PIO mode 1
               2   PIO mode 2
               3   PIO mode 3
               4   PIO mode 4

If the pio_mode is specified, the driver will only use PIO operation on the corresponding drive.

• !lba

indicates not to use LBA mode.

• !ms

indicates not to use multi-sectors commands.

Platform Support:

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x
Yes	Yes	Not tested	Not tested