Jump to content

RMVIEW.EXE

From EDM2

Revision as of 16:24, 27 May 2025 by Martini (talk | contribs) (→Parameters)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

RMVIEW is a utility to show hardware resources.

Syntax

RMVIEW <switch>

Parameters

/P: Display Physical view (default)
/P1: Physical view with planar chipset
/D: Display Driver view
/DA: Driver view - with snoopers
/D1: Driver view with planar chipset
/DC: Display Detected view - Current boot tree only
/DP: Display Detected view - Previous boot tree only
/L: Display Logical view
/R: Display raw data. Use with P L D switch
/IRQ: Display claimed Interrupt levels (IRQ)
/IO: Display claimed IO ports above 100 Hex
/IOA: Display all claimed IO ports
/DMA: Display claimed DMA channels
/MEM: Display claimed Memory regions
/SO: Sort IO, IOA, IRQ, DMA, MEM by owner
/HW: Display Hardware Tree
/?: Help

Version

Date	Version	Size	Comments
2002-05-21	10.070	32,885 bytes

DLLs Loaded

Retrieved from "https://www.edm2.com/index.php?title=RMVIEW.EXE&oldid=87960"

Files