Jump to content

ST01.ADD

From EDM2
Revision as of 21:13, 12 June 2019 by Ak120 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

ST01 Adapter Device Driver by Jochen Friedrich. 

BASEDEV=ST01.ADD

Parameters

  • /V - Turn on verbose output during installation
  • /I:<levl> - Set interrupt level. levl=0 disables disconnectios, so no interrupt is used.
  • /!SM:<id>,<id>,... - Disable OS2SCSI.DMD for specified devices
  • /!DM:<id>,<id>,... - Disable OS2DASD.DMD for specified devices
  • /S:<id> - Report streamer device to any requesting driver during boot time, even if it is powered off
  • /C:<id> - Report CD-ROM device to any requesting driver during boot time, even if it is powered off
  • /A:<adr> - Specifies the address of the ST01 adapter
  • /R - Resets bus in driver initialization phase
Retrieved from "https://www.edm2.com/index.php?title=ST01.ADD&oldid=63028"