DosDevConfig
Gets information about attached devices.
Syntax
DosDevConfig(pdevinfo, item)
Parameters
- pdevinfo (PVOID) - output
- Address of the area where the information is returned.
- All returned device information is BYTE-sized, so this should be the address of a BYTE variable.
- item (ULONG) - input
- Device information to be returned.
- This parameter has one of the possible values:
- 0 DEVINFO_PRINTER: Number of parallel or printer ports.
- 1 DEVINFO_RS232: Number of RS232 ports.
- 2 DEVINFO_FLOPPY: Number of diskette drives.
- 3 DEVINFO_COPROCESSOR: Presence of math coprocessor hardware:
- 0 No coprocessor hardware
- 1 Coprocessor hardware installed
- 4 DEVINFO_SUBMODEL: PC Submodel Type. The returned information is the system submodel byte.
- 5 DEVINFO_MODEL: PC Model Type. The returned information is the system model byte.
- 6 DEVINFO_ADAPTER: Type of primary display adapter:
- 0 Monochrome or printer adapter
- 1 Other
Return Code
- ulrc (APIRET) - return
- DosDevConfig returns one of the following values:
- 0 - NO_ERROR
- 87 - ERROR_INVALID_PARAMETER
Example Code
This example gets information about the installed devices and displays it. Some return code checking was omitted for brevity.
#define INCL_DOSDEVICES /* Device values */
#define INCL_DOSERRORS /* Error values */
#include <os2.h>
#include <stdio.h>
int main(VOID) {
BYTE Model = 0, /* Model number */
SubModel = 0, /* Submodel */
Adapter = 0, /* Display adapter type */
CoProc = 0, /* Math coprocessor installed? */
Printers = 0; /* Number of printers */
APIRET rc = NO_ERROR; /* Return code */
rc = DosDevConfig(&Model, DEVINFO_MODEL);
if (rc != NO_ERROR) {
printf("DosDevConfig error: return code = %u\n", rc);
return 1;
}
rc = DosDevConfig(&SubModel, DEVINFO_SUBMODEL);
printf(" Model/SubModel: %d / %d\n", Model, SubModel);
rc = DosDevConfig(&Adapter, DEVINFO_ADAPTER);
printf(" Display type: %s\n", (Adapter ? "Color" : "Monochrome"));
rc = DosDevConfig(&CoProc, DEVINFO_COPROCESSOR);
printf(" Math co-processor? %s\n", (CoProc ? "Yes" : "No"));
rc = DosDevConfig(&Printers, DEVINFO_PRINTER);
printf("Number of printers: %d\n", Printers);
return NO_ERROR;
}