Jump to content

TRIOS2.ADD

From EDM2
Revision as of 00:03, 5 September 2017 by Ak120 (talk | contribs)

Triones Bus Master EIDE/ATAPI Device Driver

BASEDEV=TRIOS2.ADD [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]]

Parameters

V
Indicates to display verbose information.
drive
Specifies which drive to override on. It can be:
PM primary/master
PS primary/slave
SM secondary/master
SS secondary/slave
dmamode
specifies the overriding DMA mode. It can be:
SW2 single word DMA mode 2
MW1 multi-word DMA mode 1
MW2 multi-word DMA mode 2
NO not use DMA operation. The PIO will be used.
piomode
specifies the overriding PIO mode. It can be:
0 PIO mode 0
1 PIO mode 1
2 PIO mode 2
3 PIO mode 3
4 PIO mode 4
If the pio_mode is specified, the driver will only use PIO operation on the corresponding drive.
!lba
indicates not to use LBA mode.
!ms
indicates not to use multi-sectors commands.
Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
Yes Yes Not tested Not tested

Download