This component contains the "IBM OS/2 Dynamic Host Configuration Protocol Services", "IBM OS/2 TCP/IP Stack" and "IBM OS/2 TCP/IP Security Services (40/56-bit Encryption)".
Documentation
The distribution of the TCP/IP OS/2 files is described on the next graphic:
Files
\MPTN
Name |
Comments
|
DDCCMST.HLP |
help file DDNS Client Configuration
|
DHCAMST.HLP |
help file DHCP and Dynamic IP Client Administration
|
DHCMMST.HLP |
help file DHCP Client Monitor
|
DIPAMST.HLP |
help file Introduction to DHCP and Dynamic IP
|
SYSLEVEL.DHC |
|
SYSLEVEL.IPS |
|
SYSLEVEL.MPT |
|
\MPTN\BIN
\MPTN\DLL
\MPTN\ETC
\MPTN\ETC\DAT
\MPTN\ETC\SECURITY
\MPTN\MSG\NLS
\MPTN\PROTOCOL
Name |
Comments
|
AFINET.SYS |
IBM OS/2 TCP/IP Stack Protocol Layer: Transport protocol device driver for the AF_INET socket type.
|
AFINETK.SYS |
IBM OS/2 TCP/IP Stack Protocol Layer: 32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak13 for Warp 4 Part of the TCP/IP Ver. 4.x firewall
|
AFLEAN.SYS |
IBM OS/2 TCP/IP Stack Protocol Layer: Mini stack for remote cid install.
|
AFNB.SYS |
IBM OS/2 TCP/IP Stack Protocol Layer: Provides support for sockets over NetBIOS.
|
AFOS2.SYS |
IBM OS/2 TCP/IP Stack Protocol Layer: Local Interprocess Communication (LIPC) device driver.
|
CDMF.SYS |
Used by the Firewall built into TCP/IP 4.1 and above.
|
DES.SYS |
National standard encryption protocol (US) used in triple DES encryption with 128-bit key.
|
FWIP.SYS |
Device which will receive packets, check them to the current ruleset and choose wether or not to discard them.
|
IPSEC.SYS |
Used for the IPSec implementation on OS/2, however it is needed for the installation of your firewall, otherwise you will not be able to use the logging-feature.
|
MD5.SYS |
|
SOCKETS.SYS |
IBM OS/2 TCP/IP Stack Sockets Layer: Provides the common sockets layer for the protocol stacks.
|
SOCKETSK.SYS |
|
\MPTN\SAMPLES\ETC
Publications
Links