TRIOS2.ADD

Triones Bus Master EIDE/ATAPI Device Driver

BASEDEV=TRIOS2.ADD [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]]

Parameters

V

Indicates to display verbose information.

drive

Specifies which drive to override on. It can be:

PM primary/master

PS primary/slave

SM secondary/master

SS secondary/slave

dmamode

specifies the overriding DMA mode. It can be:

SW2 single word DMA mode 2

MW1 multi-word DMA mode 1

MW2 multi-word DMA mode 2

NO not use DMA operation. The PIO will be used.

piomode

specifies the overriding PIO mode. It can be:

0 PIO mode 0

1 PIO mode 1

2 PIO mode 2

3 PIO mode 3

4 PIO mode 4

If the pio_mode is specified, the driver will only use PIO operation on the corresponding drive.

!lba

indicates not to use LBA mode.

!ms

indicates not to use multi-sectors commands.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x
Yes	Yes	Not tested	Not tested