INI910U.ADD: Difference between revisions

Latest revision as of 00:17, 29 May 2019

Driver for Initio 9100 SCSI cards

BASEDEV=INI910U.ADD

Parameter

/V - Verbose mode provides detail information about driver when driver is initialized
/!V - Non Verbose mode (default)
/ET - Driver assumes that all targets have more than one LUN (default)
/!ET - Driver assumes that all targets only have LUN 0
/Q:x - Specifies maximum number of tag commands per target
/!Q - No tag command
/B:(d,dd),. - Scan devices only on PCI BUS d, DEVICE dd
/B:d - Scan all the devices on the PCI BUS d
/T:xxxx - Target enable mask WORD (Default scan all targets)
/A:d - Adapter IDs are assigned based on BIOS address and then PCI device address
/DM:d,.. - Enable direct access storage device (DASD) support on target d
/!DM:d,.. - Disable DASD manager support on target d
/SM:d,.. - Enable SCSI manager support on target d
/!SM:d,.. - Disable SCSI manager support on target d

Product Support
OS/2 1.3
OS/2 2.0	S
OS/2 2.1	S
OS/2 2.11 SMP	S
OS/2 Warp 3	S
OS/2 Warp Connect	S
OS/2 Warp 4	S
OS/2 Warp Server for e-Business	S

@@ Line 1: / Line 1: @@
-===INI910U.ADD===
+Driver for Initio 9100 SCSI cards
-Driver for Initio 9100 SCSI cards.
   BASEDEV=INI910U.ADD
-'''Parameter:'''
+==Parameter==
+* /V - Verbose mode provides detail information about driver when driver is initialized
+* /!V - Non Verbose mode (default)
+* /ET - Driver assumes that all targets have more than one LUN (default)
+* /!ET - Driver assumes that all targets only have LUN 0
+* /Q:x - Specifies maximum number of tag commands per target
+* /!Q - No tag command
+* /B:(d,dd),. - Scan devices only on PCI BUS d, DEVICE dd
+* /B:d - Scan all the devices on the PCI BUS d
+* /T:xxxx - Target enable mask WORD (Default scan all targets)
+* /A:d - Adapter IDs are assigned based on BIOS address and then PCI device address
+* /DM:d,.. - Enable direct access storage device (DASD) support on target d
+* /!DM:d,.. - Disable DASD manager support on target d
+* /SM:d,.. - Enable SCSI manager support on target d
+* /!SM:d,.. - Disable SCSI manager support on target d
-* /V
+{{ProdS |V20=S|V21=S|V22=S|V30=S|V31=S|V40=S|V45=S}}
-Verbose mode provides detail information about driver when driver is initialized
-* /!V
+[[Category:BASEDEV Statements]][[Category:Adapter Device Drivers]]
-Non Verbose mode (default)
-* /ET
-Driver assumes that all targets have more than one LUN (default)
-* /!ET
-Driver assumes that all targets only have LUN 0
-* /Q:x
-Specifies maximum number of tag commands per target
-* /!Q
-No tag command
-* /B:(d,dd),.
-Scan devices only on PCI BUS d, DEVICE dd
-* /B:d
-Scan all the devices on the PCI BUS d
-* /T:xxxx
-Target enable mask WORD (Default scan all targets)
-* /A:d
-Adapter IDs are assigned based on BIOS address and then PCI device address
-* /DM:d,..
-Enable direct access storage device (DASD) support on target d
-* /!DM:d,..
-Disable DASD manager support on target d
-* /SM:d,..
-Enable SCSI manager support on target d
-* /!SM:d,..
-Disable SCSI manager support on target d
-'''Platform Support:'''
-{| class="wikitable"
-|-
-!OS/2 2.x
-!OS/2 3.0
-!OS/2 4.0
-!OS/2 4.5x
-|-
-|Yes
-|Yes
-|Yes
-|Yes
-|}
-[[Category:BASEDEV Statements]]