XDFLOPPY.FLT: Difference between revisions

Revision as of 14:11, 10 April 2019

Product Support
OS/2 1.3
OS/2 2.0
OS/2 2.1	*
OS/2 2.11 SMP
OS/2 Warp 3	S
OS/2 Warp Connect	S
OS/2 Warp 4	S
OS/2 Warp Server for e-Business	S

This is required for reading diskettes which are written using the eXtended Disk Format (XDF) format. These are usually OS/2 installation diskettes, and some hardware driver diskettes. The first 3 disks of OS/2 Warp Version 3 and the first 4 disks of OS/2 Warp 4.0 do not use the XDF format.

BASEDEV=XDFLOPPY.FLT <parameters>

TIP: After installation you can put a REM in front of the XDFLOPPY.FLT, as it's only needed for the installation disks and Fixpak disks.

Parameters: There are no parameters available.

@@ Line 1: / Line 1: @@
+{{ProdS |V21=*|V30=S|V31=S|V40=S|V45=S}}
 This is required for reading diskettes which are written using the eXtended Disk Format (XDF) format. These are usually OS/2 installation diskettes, and some hardware driver diskettes. The first 3 disks of [[OS/2 Warp Version 3]] and the first 4 disks of OS/2 Warp 4.0 do not use the XDF format.
   BASEDEV=XDFLOPPY.FLT <parameters>
-'''TIP:''' After installation you can put a REM in front of the XDFLOPPY.FLT, as it's only needed for the installation disks and Fixpak disks.
+;TIP: After installation you can put a REM in front of the XDFLOPPY.FLT, as it's only needed for the installation disks and Fixpak disks.
 ;Parameters:There are no parameters available.
-{| class="wikitable"
-|+Platform Support:
-!OS/2 2.x
-!OS/2 3.0
-!OS/2 4.0
-!OS/2 4.5x
-|-
-|*
-|Yes
-|Yes
-|Yes
-|}
 [[Category:BASEDEV Statements]]