CONFIG.SYS - DEVICE Statements

Return to The Config.sys Documentation Project Main Page

Device Drivers are needed by OS/2 to work with your installed hardware. The Device Drivers are loaded after the Base Device Drivers Unlike the Base Device Drivers, the Device Drivers are loaded in the order they appear in the config.sys file. The following pages describe these entries:

DEVICE=$ICPMOS2.SYS

Power Management Driver for PCMCIA

  DEVICE=$ICPMOS2.SYS

ATTENTION: Must be after all other listed drivers in the config.sys.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=ACCND.OS2

ACCTON EN1207D Series Ethernet PCI Adapter NDIS driver: http://www.accton.com/accton/products/adapters/en1207d_wol/base.html Network card in IBM's netvista 6269N2G

  DEVICE=ACCND.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ACECAD.SYS

Driver for the ACECATIII digitizing board.

  DEVICE=ACECAD.SYS

for working DEVICE=E:\OS2\BOOT\MOUSE.SYS STYPE=ACECAD$ must be added

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=AD1816DD.SYS

Analog Devices AD1816 Soundport Driver

 DEVICE=AD1816DD.SYS

Parameter:

• /N:$strng$

Device driver name assigned by MINSTALL

• /3:y

3D Phase expansion (0-31)

NOTE: The Aztech SC16-3D sound card has an Analog Devices AD1816 chip whose drivers should work, in theory. The problem is that this card does not report itself as a standard AD1816 based board, so even though the PnP-Manager correctly initializes the card, the driver can neither recognize the board nor pick up the IRQ, I/O, and DMA values from the PnP-Manager. Martin Schaffoener (martin.schaffoener@student.uni-magdeburg.de) patched the driver so it will work also with this card. Search for azsc163d.zip

DEVICE=ADSMSDIS.SYS

Personally Safe n Sound tape backup driver that from Warp Server for E-Business

 DEVICE=ADSMSDIS.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ADSMTAPE.SYS

Personally Safe n Sound tape backup driver that from Warp Server for E-Business.

  DEVICE=ADSMTAPE.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	No	No	Yes	Yes	Yes

DEVICE AFINET.SYS Part of the TCP/IP Protocol Drivers.

  DEVICE=C:\Mptn\Potocol\Afinet.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=AFINETK.SYS

32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak13 for Warp 4 Part of the TCP/IP Ver. 4.x firewall

  DEVICE=AFINETK.SYS

Parameter:

• /V

Verbose, shows version-number

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	No	Yes-FP13	Yes	Yes	Yes

DEVICE=AFNB.SYS

Basic-NetBIOS-Socket-Support Driver.

  DEVICE=AFNB.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=AFOS2.SYS

Part of the TCP/IP Protocol Drivers

  DEVICE=C:\Mptn\Potocol\Afos2.sys 

Parameter:

• /V

Verbose, shows version-number

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=AIRO340.SYS

Cisco Systems 340 Series Wireless Lan Adapter.

  DEVICE=AIRO340.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ALC.SYS

ALC* AC97 Audio Codec OS/2 Device Driver. http://www.realtek.com.tw/htm/download/driver.asp

  DEVICE=ALC.SYS

Parameter:

• I5

The 'I' means interrupt, the available interrupts are 5, 7, 9, 10, 11, 12 and 15

• N:ALC1$

Physical Device Driver name

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=AMOUSE.SYS

Mouse Driver for Wheel Mices. like e.g. the:

• Logitech Pilot Mouse+
• Logitech Mouse Man+
• Logitech Optical Wheel Mouse
• Microsoft Intellimouse
• IBM Scrollpoint Mouse
• Typhoon 40159
• Trust 250S

  DEVICE=AMOUSE.SYS

NOTE: With Amouse installed XFree86 refuses to work Available for FREE at http://home.t-online.de/home/klaus.breining/

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ANSI.sys

This driver installs the ANSI support for DOS windows.

  DEVICE=C:\OS2\MDOS\ANSI.SYS <parameters>

Parameters:

• /X

Enables the redefinition of keys.

• /K

Prevents the use of extended keyboards. Extended keyboards work as standard keyboards.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=APM.SYS

Advanced Power Management (APM) device driver. Provides support for your APM BIOS on your motherboard.

  DEVICE=C:\Os2\Boot\Apm.sys parameter 

Parameter:

• /B

favorizes the direct connection to the APM-BIOS support

• /D

favorizes the device-driver connection of the APM support

• /V

x.y forces the compatibility to APM Version x.y (e.g. 1.0)

Together with the APMDAEMN.SYS these settings can also be done by using the Power-Symbol in your System Setup Folder.

TIP: To work correctly you have 1. to change your Warp-Center properties to 'Show only when Mouse is over Center's position' and 2. enable in 'Power Properties' in your System folder on the 'Performance' page 'Automaticall change performance when the power source changes'. (Only tested with Warp4 fixpak 13).

TIP: When OS/2 fails to install in ACPI only Systems REM this driver (has to be done on the Installationdisks too) or give APM_NH.SYS a try, it is rported to work on Intel based Motherborads too.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE APM_NH.SYS

Replacement APM driver (APM_NH.SYS) APM_NH.SYS is based on 10.037 level of IBM's APM.SYS (same as XR_D002 but probably outdated with respect to OS/2 v 4.52 G.A.). Its purpose is to honor the APM hooks installed by VIAAPM.SYS while allowing usual APM tasks such as power-down or suspend mode. It is therefore essential that one installs APM_NH.SYS rather than APM.SYS, so the KT266A idle hook would not be taken out by IBM's driver.

  DEVICE APM_NH.SYS

Tip: In System which only have ACPI it is reported that APM-NH.SYS works even it is a Intel chipset.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=APPOINT.SYS

Pen for OS/2 Device Driver for Kurta PenMouse/APT Gliffic Plus.

  DEVICE=APPOINT.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ARLTNDIS.OS2

ARtem Onair ComCard. The ComCard is a IEEE 802.11 compliant wireless LAN network card. For more Information see http://www.artem.de

  DEVICE=ARLTNDIS.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ARTPAD.SYS

Device Driver for Wacom Artpad used with Pen for OS/2

  DEVICE=ARTPAD.SYS

IRQ=4 COMPORT=1 ADRESS=3F8 is used for Com1 IRQ=3 COMPORT=2 ADRESS=2F8 is used for Com2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ARTZ.SYS

Pen for OS/2 Device Driver for Wacom UD-0608.

  DEVICE=ARTZ.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASNPCI.OS2

AsanteFast 10/100 PCI Ethernet driver.

 DEVICE=ASNPCI.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASP4CORE.SYS

Vortex AU8820 Core OS/2 driver.

  DEVICE=ASP4CORE.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASP4JOY.SYS

Vortex AU8820 OS/2 Joystick driver.

  DEVICE=ASP4JOY.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASP4OS2.SYS

Vortex AU8820 OS/2 MMPM/2 driver.

  DEVICE=ASP4OS2.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASPIDRV.SYS

ASPI Driver supplied by Solution Technology Inc.

  DEVICE=ASPIDRV.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASPIPFA.SYS

Device driver used to distinguish between IDE drives and SCSI drives when using Hard Disk Drive Monitor.

The Hard Disk Drive Monitor monitors the status of SMART-compatible harddisk drives in your computer. available as ftp://ftp.pc.ibm.com/pub/pccbbs/commercial_desktop/zp1t06a.exe

  DEVICE=ASPIPFA.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASPIROUT.SYS

The interface of ASPI Router merely is an extension of the interface of OS2-ASPI.DMD needed e.g. by the FREE CDRECORD/2 by Chris Wohlgemuth available at: http://www.geocities.com/SiliconValley/Sector/5785/ and by the FREE SANE (Scanner Access Now Easy) By Yuri Dario available at http://www.geocities.com/SiliconValley/Peaks/4320.

  DEVICE=ASPIROUT.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ASPITAPE.SYS

GTAK Driver for SCSI tape access by GTAR scsitape.dmd and scsitape.sys also belong to the package By Andreas Kaiser Andreas.Kaiser@stuttgart.netsurf.de, gtak258.zip gtar258.zip.

  DEVICE=ASPITAPE.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ATALK.SYS

Appletalk driver from Lanserver for Macintosh

 DEVICE=ATALK.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=ATI0.sys

Used by ATI 3D Rage graphic cards.

  DEVICE=C:\OS2\ATI0.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=ATIM64.SYS

Used by ATI 3D Rage grafic cards.

  DEVICE=C:\OS2\ATIM64.SYS 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=ATKP.SYS

Appletalk PAP Port driver from Lanserver for Macintosh.

  DEVICE=ATKP.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=AVMB1.SYS

Driver for the AVM Active ISDN-Controller B1.

  DEVICE=AVMB1.SYS

Parameter:

• /$

If old programs needs the old naming convention (like an outdated CFOS).

NOTE: The passive AVM-Cards (like the Fritzcard) aren't supported by AVM with OS/2 Drivers.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=AUDIOVDD.SYS

This is the standard VDD for audio device drivers that prevents DOS sessions from accessing the audio hardware when an OS/2 session is using it and vice versa. The driver comes with OS/2 and is used by a lot of diferent soundcards.

  DEVICE=C:\MMOS2\AUDIOVDD.SYS

Parameter:

• PAS161$ for the MediaVision's ProAudio Spectrum Soundcard
• SBAUD1$ for the Sound Blaster 16 sound card

NOTE: the parameter is the link between the OS2 driver and the DOS driver. The DOS driver inherits it's settings associated with the parameter

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=B57.OS2

Broadcom Corporation 10/100/1000 NetXtreme Ethernet DOS/OS2 NDIS2 driver.

  DEVICE=B57.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BIPMAC.OS2

This is a driver for the IBM Active 2000 ISDN card.

  DEVICE=C:\IBMbip\OS2\BIPMAC.OS2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BIPPDD.OS2

This is a driver for the IBM Active 2000 ISDN card.

  DEVICE=C:\IBMbip\OS2\BIPPDD.OS2 <parameter> 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BIXANDIS.OS2

BinTec XAIR WLan PC Card http://www.bintec.de/de/index.php?r=prod/XAir&m=navbar.html&c=XAirpc.html

  DEVICE=BIXANDIS.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BT32.SYS

Radio/TV driver for BT878 based Cards

  DEVICE=BT32.SYS

Parameters:

• /V

Verbose: Show Copyright information

• /VM

Verbose modules: Like /V plus module list

• /3

Execute an INT3 at initialisation (Use kernel debugger!)

• /NOMODULE

Don't load modules at system startup (Use BT32CFG.EXE to load/unload)

• /NOCOREMODULE

Don't load core modules at system startup (Use BT32CFG.EXE to load/unload)

• /MODPARM:

Support Linux insmod parameters for various modules

• /LOADMODULE:

Load module (only with parameter /NOCOREMODULE)

• /NOIRQ

Disable IRQ for BTTV. This is for test purposes only when the driver traps at startup

NOTE: BT32.SYS must reside after LXAPI32.SYS.

NOTE: BT32.SYS contains the following modules:

• bttv
• tvaudio
• tuner
• msp3400
• tda7432
• tda9875

NOTE: Module parameters: BT32.SYS contains a lot of module parameters. See documentation in the DOC directory of the package. Most important paramers are:

• bttv card=n Specify a specific BTTV card.
• tuner=n Specify a specific BTTV tuner.

Valid numbers for n for both parameters are listed in DOC\CARDLIST

See DOC\Insmod-options for all other parameters.

NOTE: If you are using wcast.sys also there may be problems to use the bttv driver after an application has used wcast.sys. (Attention: Multimedia Setup also opens wcast.sys!!!) Known results are: No picture, No sound or both.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BTSSCSI.SYS

Driver for Back Again/2 SCSI tape support.

  DEVICE=BTSSCSI.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BUNDLE.SYS

Module for Teles ISDN Cards.

  DEVICE=BUNDLE.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=BUSAUDIO.SYS

C-Media CMI 8330 Soundcard driver (AD 8329 Chip).

  DEVICE=BUSAUDIO.SYS

Parameters:

• /D:n

DMA channel, n=0,1 or 3

• /I:n

Interrupt, n=5,7,9,10,11 or 12

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CAPI.DLL

CAPI-DLL v.1.1 16-bit for ISDN Cards.

  DEVICE=CAPI.DLL

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CAPI20.DLL

CAPI-DLL v.2.0 32-bit for ISDN Cards.

  DEVICE=CAPI20.DLL

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CAPI20.OS2

Eicon Diehl COMMON-ISDN-API Version 2.0.

  DEVICE=CAPI20.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CBENDIS.OS2

Xircom CardBus Ethernet 10/100 Adapter

  DEVICE=CBENDIS.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CBEODI.OS2

Xircom CardBus Ethernet 10/100 Adapter OS/2 Netware ODI driver.

  DEVICE=CBEODI.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CBEODI.OS2

Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for 1TR6(German) protocol.

  DEVICE=CBEODI.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CCAXE.SYS

Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol.

  DEVICE=CCAXE.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CCSINIT.SYS

ChipChat Sound Initializer only needed with warp 4

 DEVICE=CCSINIT.SYS

The ChipChat is one of the rare available Soundcards for the microchannel, it is based on the ESS1688. For more information see: http://www.ChipChat.com

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CD1400.SYS

RISC COM CD1400 Device driver by DECISION-COMPUTER INTERNATIONAL Co.,LTD

  DEVICE=CD1400.SYS

Parameter:

• /Mxxxx

card memory address

• /Ixx

IRQ Nø

• /Cxx

Assign the port number of the first port on the card ( COM1 to COM96 )

NOTE: The driver will autodetect the number of communication ports on the card ( 4 or 8 ports ).

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CDBASPI.SYS

CD-TEK driver to access easily the PIONEER DRM-1804X autochange CD-ROM device.

  DEVICE=CDBASPI.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CDMF.SYS

Used by the Firewall built into TCP/IP 4.1 and above. This is IBM's Commerical Data Masking Facility encryption driver. This driver is an early version of the IBM proposed new national standard encryption protocol (US) with a variable key of up to 128-bits. It supports the VPN (Virtual Private Network) built-in to the firewall of TCPIP 4.1 and later. This driver uses a larger data block than DES and is faster than competing protocol drivers. It is a enhanced version of DES. Many to don't consider it as strong an algorithm as Blowfish or Ideal, widely available competitors to this protocol.

  DEVICE=C:\Mptn\Potocol\Cdmf.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=CDMGRDRV.SYS

Driver of the FREE CD-Rom Manager for Plextor SCSI CD-ROM drives. Developed by Markus and Christian Mueller.

  DEVICE=CDMGRDRV.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=CDROMMGR.DMD

CD-ROM device manager which prevents subsequent requests to different slots of a CD changer.

  DEVICE=CDROMMGR.DMD

NOTE: OS2CDROM.DMD must be disabled to work.

Parameter:

• /T:n

CDROMMGR.DMD has the changer feature enabled by default. It prevents slot changes for 1000ms by returning ERROR_DEVICE_NOT_READY to the caller. The timeout value can be set at load time through option /T: The valid range is from 1 second up to 60 seconds. If CDROMMGR.DMD does not find a CD Changer device, the feature will automatically be disabled and cannot be activated.

• /C

CDROMMGR.DMD will manage only CD Changers. Normal CD-ROM drives or CD Burners will not get allocated. This option is useful if you want to use another CD-ROM device manager for special features, like CTCDROM.DMD for Unite CD-Maker. To make sure that CDROMMGR.DMD gets control over the CD Changer devices, it has to be loaded as the first CD-ROM manager.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=CE3NDIS.OS2

Xircom Ethernet Adapter 10/100 NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.

  DEVICE=CE3NDIS.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=CFMASPI.SYS

Driver for the TWAIN Scanner Module by CFM (Computer for Mankind)

  DEVICE=CFMASPI.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=CFOS.SYS

CFOS is a driver that sits between your ISDN hardware and your Modem Software ( Internet Dialer, Terminal program). It emulates a COM port. 'cFos' device driver receives the usual modem commands, the so-called AT commands from the communication programs and turns them into the corresponding ISDN CAPI commands. ISDN CAPI responses are turned into modem responses of the same meaning, so that the communication programs 'understand' them.

  DEVICE=C:\Cfos\Cfos.Sys <parameters>

As you can enter any equipment names (e.g.: ISDN1) or several COM ports (a maximum of two in the shareware version, up to 30 in 'cFos Professional'). Be careful not to enter COM ports that actually exist as hardware and are in use (e.g. a COM port for your mouse).

NOTE: The CFOS.SYS driver should be loaded after drivers for serial interfaces (COM.SYS oder SIO.SYS) and after the CAPI driver.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CFOS20.SYS

CAPI 2.0 CFOS device driver, for more details see DEVICE CFOS.SYS.

  DEVICE=CFOS20.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CLEANUP.SYS

This is a simple device driver that DELETES the specified file. Wild cards are NOT supported. To delete multiple files, add multiple times to config.sys. Part of the Graham Utilities 2.X available at http://www.warpspeed.com.au/graham.htm

  DEVICE=CLEANUP.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CLICHOS2.SYS

Crystal Semiconductor CS4299 AC97 Audio Driver (to be found e.g. on IBM T23 Thinkpad) This chip doesn't support Midi, you need Timidity to geht Midi working.

  DEVICE=CLICHOS2.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CMPCI16.SYS

C-Media CMI8738 OS/2 Audio Driver ported from Linux sources, based on the SBLive project.

  DEVICE=CMPCI16.SYS

Parameter:

• /V

verbose (prints copyrights during driver init)

• /C

enable CD audio input

• /M

enable microphone audio input

• /L

enable linein audio input

• /A

enable auxin audioinput (since ver. 0.13)

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CMPCI32.SYS

C-Media CMI8738 OS/2 Audio Driver

  DEVICE=CMPCI32.SYS

Parameter:

• /V:

verbose (prints copyrights during driver init)

• /D:

print start and end address of code (useful to locate the code that causes a trap (CS:EIP in trapscreen))

• /R:

use linein jack to output rear channels

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=COM.SYS

These driver is required for serial communication.

  DEVICE=C:\OS2\Boot\COM.SYS <parameters>

TIP: below. This line MUST appear after any driver that uses a communications port. Older versions of COM.SYS are limited to 57600 Baud, newer ones (e.g. delivered with Warp 4) are able to do 115200 Baud. Beginning with build 10.042 PCI Add-On cards with implemented software interrupt sharing are supported too, beginning with build 10.052 there are 16 com ports available and beginning with build 10.068 Combo Cards are supported.

TIP: There are two very good replacement drivers called SIO.SYS\VSIO.SYS.

TIP: To add support for COM3 and COM4 at location 3E8 with IRQ 4 and 2E8 with IRQ 3 respectively, add (3,3E8,4) (4,2E8,3) to the DEVICE line, e.g.

  DEVICE=drive:\OS2\COM.SYS (3,3E8,4) (4,2E8,3)

You can also use this method to change a COM ports assigned IRQ. The normal address for COM1 is 3F8 and IRQ 4, for COM2 2F8 and IRQ3.

TIP: With ThinkPads should the address be added. e.g:

  DEVICE=drive:\OS2\BOOT\COM.SYS (1,3F8,4) (2,2F8,3)

Parameter:

• /V

Verbose (since 10.052)

• /W

Wait verbose mode (since 10.052). Displaying pauses with a "Press Enter to continue..." message.

• /F

Find COM ports on PCI combo (serial/parallel) cards automatically (since 10.068).

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=COM02.SYS

For IBM PS/2 model 90 & 95 only. Lets you use the communications ports COM1 and COM2. See DEVICE COM.SYS.

  DEVICE=COM02.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CONCERTO.SYS

Pen for OS/2 Device Driver for Compaq Concerto.

  DEVICE=CONCERTO.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CPASPI.SYS

Driver for scanner access by Impos/2.

  DEVICE=CPASPI.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CPPOPA3.SYS

High-resolution-timer manipulating sampling device driver from IBM?s Visual Age C/C++ (and COBOL) compilers (used by the Profiling tool/Performance Analyzer (ICSPERF)).

  DEVICE=CPPOPA3.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CPPPAN40.SYS

Device driver for Visual Age for C++ 4.0 performance analysis.

  DEVICE=CPPPAN40.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CPQNF3.SYS

OS/2 ODI Driver for Compaq NETFLEX-3/NETELLIGENT Controllers.

  DEVICE=CPQNF3.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CPUMONP.SYS

CPU Monitor Plus, from Bon Ami Software.

  DEVICE=CPUMONP.SYS

TIP: By Daryl Sperber: CPUMONP was last updated in 1996 (for FP17 of Warp connect) and has worked just fine for Warp 3 and Warp 4 all this time. However it obviously now has a fatal incompatibility with FP14 of Warp 4 that is causing the Trap 000e for me.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CT5880.SYS

Creative Lab Ensoniq CT5880 PCI Audio Device Driver.

 DEVICE=CT5880.SYS

NOTE: No MIDI support, no WIN/OS2 support.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CTCDROM.DMD

Driver for Unite CD-Maker.

 DEVICE=CTCDROM.DMD

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CWAUDIO.SYS

Sound Drivers for the Crystal CS4231, 4232 (A, B), 4235, 4236 (B, D, E), 4237B, 4238B, 4239.

 DEVICE=CWAUDIO.SYS

NOTE: for 4231, 4232 and 4236 use 'Mode2' driver version (latest 1.7)

TIP: If you have problems with the Yamaha OPL3-SAx chipset: According to a user, instead of using the Yamaha OPL-3 SAx drivers for the same audio chipset, using the driver for Crystal CS4232 works fine without any limitations.

A FREE mixer for the crystal cards is LBCSMix V.1.0 from http://freebyte.ml.org/~boga/OS2Programs.html

Parameter for 'mode3' drivers:

• /N:

Name of PDD BSAUD1$ (Supplied by install)

• /V

Verbose Display

• /X1:

AUX1 unmute/gain 0..100 (decimal) (*50) (usually "Line-In")

• /X2:

AUX2 unmute/gain 0..100 (decimal) (*50) (usually CD-ROM)

• /L:

LINE unmute/gain 0..100 (decimal) (*100)(FM volume)

• /LCAPT:

Line-In record source X1, X2, *X1X2, L (X1X2 is mixed aux1+aux2)

• /T:

Inactivity power down 1..5 minutes (*1)

• /MBY:<0,1>

Mono bypass *1 (mono-in connected to mono-out)

• /MIM:<0,1>

Mono input mute *1 (mono-in not connected to input mixer)

• /MOM:<0,1>

Mono out mute *0 (audible)

• /XCTRL0:<0,1>

XCTRL0 Pin set System specific. Sometimes used to

• /XCTRL1:<0,1>

XCTRL1 Pin set control power to amplifier. On IBM Aptiva with Bose speakers, set both to 1

• /P:

Codec Port *534, 608, (530..FF8, divisible by 4)

• /I:

Codec IRQ *5, 7, 9, 11, 15 (decimal)

• /D:

Codec DMA 0, 1, 3 (Default 1,0)

• /C:

Control Port 120, *538, (120..FF8, divisible by 8)

• /J:

Joystick Port *200, 208, NONE

• /S:

Sound Blaster Port *220, 240, 260, 280, NONE

• /M:

MPU Port and IRQ *330, NONE, (300..3E0, divisible by 8) IRQ: 7, 9, 11, 12, 15, *NONE

• /F:

FM synth port *388, NONE, (388..3F8, divisible by 8)

• /IRQRate:dd

Target interrupt rate *32 Range: 1..64 interrupts per second

• /DMASize:nnnn

DMA Buf size maximum *8192 Range: 256..16384 (2 IRQs/Buffer) Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CWGUTIL.SYS

Crystal DSP manager utility device driver.

  DEVICE=CWGUTIL.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=CWMPU401.SYS

Crystal MPU401 driver for a complete discription see MPU401.SYS.

  DEVICE=CWMPU401.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=DC21X4.OS2

Digital Semicon. DC21X4-based Ethernet Adapter Network driver.

  DEVICE=DC21X4.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Dcf2cde.sys

This driver is used by the DCF/2 disk compression program.

  DEVICE=C:\Dcf2\Dcf2cde.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Dcf2pdd.sys

This driver is used by the DCF/2 disk compression program.

  DEVICE=C:\Dcf2\Dcf2pdd.sys parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Dcf2mgr.sys

This driver is used by the DCF/2 disk compression program.

  DEVICE=C:\Dcf2\Dcf2mgr.sys parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=DCF77.SYS

Driver for DCF77-Radiocontrol Watch. Available for FREE at http://www.prog-link.com

  DEVICE=DCF77.SYS

Parameter:

• /P:Port

Port, 201 (Gameport), 379 (LPT1), 279 (LPT2), 3BD (LPT3), 3F8 (COM1), 2F8 (COM2), 3E8 (COM3), 2E8 (COM4)

• /IRQ=nn (or /I:nn)

Interrupt, 3, 4, 5, 7, 9, 10, 11, 12, 15 or NONE. With NONE Polling-Mode is used

• /V

Verbose

• /Q

Quiet, disables displaying informations during start

NOTE: For a complete list of parameters see the documentation deliverd with the driver.

DEVICE=DDE4EXTRA.SYS

Is used by the IBM CSET C/C++ Compiler.

  DEVICE=C:\User\Cset21\DDE4EXTRA.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=DE528.OS2

D-Link 528CT Ethernet Adapter Network driver

NOTE: It is impossible with this driver to execute graphical apps using Exceed

DEVICE DELAY.SYS [Table of contents] [Index] [DEVICES]

Device driver for providing a timed delay during system startup

avaliable for FREE at http://www.tavi.co.uk/os2pages/delay.html

Parameter:

/K /k, -K and -k are equivalent. exits the delay period immediately by pressing any key (apart shift, ctrl, alt etc.) mm:ss is the intended delay in minutes and seconds. message is an optional message that will appear during the delay period.

DEVICE DES.SYS [Table of contents] [Index] [DEVICES]

This is the current national standard encryption protocol (US) used in triple DES encryption with 128-bit key. It is currently being replaced by a new, but yet not chosen protocol. Use to encrypt user data by the VPN service.

DEVICE DFE650.OS2 [Table of contents] [Index] [DEVICES]

D-Link DFE-650 Fast Ethernet PC Card

NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.

DEVICE DIAPIS.OS2 [Table of contents] [Index] [DEVICES]

Eicon Diehl COMMON-ISDN-API Version 1.1

DEVICE DIDD.OS2 [Table of contents] [Index] [DEVICES]

This device driver stores the configuration information of every installed Eicon.Diehl ISDN-Adapter using the DI(Direct)-Interface and has to be installed before any ISDNSDI.OS2 or ISDNPDI.OS2 drivers.

DEVICE DIMAINT.OS2 [Table of contents] [Index] [DEVICES]

This device driver is a trace interface for all installed Eicon Diel ISDN adapters and is used by the DILOG.EXE application. The content of a DILOG trace depends on the driver which writes information into the DIMAINT buffer. DIMAINT uses no parameter.

DEVICE DISKFIT.SYS [Table of contents] [Index] [DEVICES]

Driver for the fault tolerance system

See OS/2 manual for more information

DEVICE DIVAPP.OS2 [Table of contents] [Index] [DEVICES]

This utility represents the Plug and Play (PnP) enabler for the Eicon Diehl ISAPlug and Play ISDN adapters.

Parameter:

-a I/O address for adapter -i Interrupt number to use -q Quiet mode -v Verbose mode, print detailed information onto screen

DEVICE DLKFET.OS2 [Table of contents] [Index] [DEVICES]

D-Link DFE-530TX PCI Fast Ethernet Adapter

DEVICE DLKPCI.OS2 [Table of contents] [Index] [DEVICES]

D-Link PCI Fast Ethernet Adapter

NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/dec.zip.

DEVICE DLKRTS.OS2 [Table of contents] [Index] [DEVICES]

D-Link DFE-530TX+ 10/100 Ethernet NIC

DEVICE DM9PCI.OS2 [Table of contents] [Index] [DEVICES]

DAVICOM DM9 PCI Series Fast Ethernet Adapter (e.g., on the SiS530 motherboard)

www.davicom.com.tw

DEVICE=Dos.sys

Is needed if you want to run DOS or Windows applications.

  DEVICE=C:\OS2\Boot\Dos.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=EcrDrv.sys

Provides support for Remote Support for OS/2. Remote Support can be found in the BonusPak and allows IBM Support Centers to log onto your OS/2 Warp 4 workstation.

  DEVICE=C:\Bonuspak\RS231B\Ecrdrv.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Fwip.sys

Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IP packet filtering to the Firewall.

  DEVICE=C:\Mptn\Potocol\Fwip.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Ftdvr.sys

The Ftdvr.sys driver is used by the BackMaster backup program. It is needed if your tape drive is connected to the floppy interface.

  Device=C:\BackMast\FTdvr.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Gamedd.sys

It is used by many Soundcards. It gives support for the Joystick connector for OS/2 programs.

  DEVICE=C:\Mmos2\Gamedd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Gamevdd.sys

It is used by many Soundcards. It gives support for the Joystick connector for Dos and Windows programs.

  DEVICE=C:\Mmos2\Gamevdd.sys

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Gradd.sys

Graphiccard driver.

  DEVICE=C:\OS2\Boot\Gradd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=IAS_DD.OS2

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=IbmTok.os2

Network adapter driver for IBM Token-ring cards.

  DEVICE=C:\Ibmcom\Macs\IbmTok.os2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Ifndis.sys

Network protocol driver. Used by TCP/IP.

  DEVICE=C:\Mptn\Potocol\Ifndis.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Ipsec.sys

Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IPSEC security to the Firewall.

  DEVICE=C:\Mptn\Potocol\Ipsec.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Ipx.sys

Gives support for the Novell Netware IPX protocol

  DEVICE=C:\Netware\Ipx.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Killer.sys

Used by the Watchcat task killer.

  DEVICE=C:\User\Watchcat\Killer.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Kmgax64.sys

It is used by Matrox Graphiccards.

  DEVICE=C:\Mga\Os2\Kmgax64.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Lanmsgdd.os2

Somewhere used by the network stuff.

  DEVICE=C:\Ibmcom\Lanmsgdd.os2 Parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Lanpdd.os2

Part of MPTS. It enables the NetBIOS and the IEEE 802.2 Protocols to OS/2 Programs. It loads also support for the LAN Virtual Device Driver ( Lanvdd.os2 ).

  DEVICE=C:\Ibmcom\Protocol\Lanpdd. 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Lanvdd.os2

Part of MPTS. It is the LAN Virtual Device Driver. It enables the NetBIOS and the IEEE 802.2 Protocols to Dos and Windows Programs.

  DEVICE=C:\Ibmcom\Protocol\Lanvdd.os2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Log.sys

This driver enables logging of system error messages and some application error messages.

note: You need also logdaem.exe

  DEVICE=C:\OS2\LOG.SYS [parameters]

Parameters:

• /E:value

This sets up the log buffer size. Value can be in the range from 4 to 64 . Default = 8 This value is expressed in Kbytes.

• /A:value

This is the size of the alarm buffer. Value can be in the range from 4 to 64 . Default = 8 This value is expressed in Kbytes.

• /OFF

If set to OFF the driver is installed but the logging of error messages is turned off. You can turn it on again with the program Syslog.

See the examples below.

To install the log driver with a log buffer size of 48 Kbytes and an alarm buffer of 16 Kbytes, add this line to your config.sys file: DEVICE=C:\OS2\LOG.SYS /E:48 /A:16

To install the log driver but turn it off after initialization use this line:

  DEVICE=C:\OS2\LOG.SYS /OFF 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Lptdd.sys

This driver allows a DOS session to print to an LPT port that has been redirected (or captured) to a network printer.

  DEVICE=C:\OS2\Mdos\Lptdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Lsl.sys

This is the Link Support Layer driver. It is the lowest layer in the Novell Open Data Link Interface model and is required for the requester.

  DEVICE=C:\Netware\Lsl.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=MD5.sys

Used by the Firewall built into TCP/IP 4.1 and above. This driver adds MD5 encryption to the Firewall.

  DEVICE=C:\Mptn\Potocol\MD5.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Midi.sys

RTMIDI helper driver. Is used by your Soundcard, but RTMIDI will work only if your Soundcard supports RTMIDI with the audio driver.

  DEVICE=C:\OS2\Boot\Midi.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Mouse.sys

Provides support for your mouse. You need also the Pointdd.sys installed.

  DEVICE=C:\Os2\Boot\Mouse.sys parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Mpu401.sys

Provides support for the MPU401 connector on your soundcard.

  DEVICE=C:\Os2\Boot\Mpu401.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=NetBeui.os2

This is the NetBIOS protocol driver.

  DEVICE=C:\Ibmcom\Protocol\NetBeui.os2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=NetBios.os2

This is the NetBIOS API driver.

  DEVICE=C:\Ibmcom\Protocol\NetBIOS.os2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=NetBios.sys

This driver provides NetBIOS support in the Netware client.

  DEVICE=C:\Netware\NetBIOS.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=NmPipe.sys

This driver provides Named Pipes support on the Netware client.

  DEVICE=C:\Netware\Nmpipe.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=NpServer.sys

This driver allows your workstation to function as a Named Pipes Netware server.

  DEVICE=C:\Netware\NpServer.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Ntr2000.sys

ODI (Netware) driver for Token Ring network adapter cards.

  DEVICE=C:\Netware\Ntr2000.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Nwreq.sys

This is the main Netware requester module and must appear in config.sys after the NmPipe.sys , Ipx.sys and Spx.sys drivers.

  DEVICE=C:\Netware\Nwreq.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Odi2Ndi.sys

This driver allows the Netware client to use MPTS as the interface to a network adapter driver and in turn, the LAN.

  DEVICE=C:\Netware\Odi2Ndi.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Opl3.sys

Is used by soundcards with an OPL3 sound chip.

  DEVICE=C:\Os2\Boot\Opl3.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Opl3sa.sys

It is used by Soundcards with Yamaha SAx sound chips.

  DEVICE=C:\Mmos2\Opl3sa.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Opl3vdd.sys

It is used by Soundcards with Yamaha SAx sound chips. It provides support for DOS sessions.

  DEVICE=C:\Mmos2\Opl3vdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Os2cdrom.dmd

Provides support for IDE CDRom drives. It is a device manager driver.

note: To get CDRom support in OS/2 you must also install Ibm1s506.add and Ibmidecd.flt .

  BASEDEV=Os2cdrom.dmd parameters

Parameters:

• /V

Displays some information about your CDRom drive during the boot.

• /Q

Stops displaying error messages during the boot.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Os2.sys

This is a driver for the Iomega ZIP-100 drives. It works only with the older models.

  DEVICE=C:\oad\OS2.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=P9100.sys

Is used by graphiccards with a Weitek P9100 chip.

  DEVICE=C:\Os2\Boot\P9100.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Pmdd.sys

Installs pointer draw device driver support.

  DEVICE=C:\Os2\Boot\Pmdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Pointdd.sys

Provides mouse pointer draw support.

  DEVICE=C:\Os2\Boot\Pointdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Protman.os2

Network protocol-manager driver.

  DEVICE=C:\Ibmcom\Protman.os2 Parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=R0stub.sys

Is somewhere used by MMOS2.

  DEVICE=C:\Mmos2\R0stub.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=RdrHelp.200

This driver is part of MPTS and is necessary somewhere for the NetBIOS protocol.

  DEVICE=C:\Ibmcom\Netprog\Rdrhelp.200 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Route.sys

This driver allows a Netware client to see Netware servers on other physical LAN (or segment) across source-routing routers (used by many IBM routers). This is equivalent to Route.nlm for a Netware server.

  DEVICE=C:\Netware\Route.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Rzt2boot.sys

This driver is used by the IBM AO-Manager.

  DEVICE=C:\SMG\Bin\Rzt2boot.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Sbawed2.sys

It is used by Creative Labs AWE32 soundcards.

  DEVICE=C:\Sbos2\Sbawed2.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=SddHelp.sys

The helper driver for the Scitech Software Display Doctor for OS/2. The Display Doctor is a universal driver for almost every graphiccard. This software is currently in BETA test!

  DEVICE=C:\OS2\Sdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Sesdd32.sys

Security device driver.

  DEVICE=C:\Os2\Boot\Sesdd32.sys

More information will be available in one of the next releases of the Config.Sys Documentation Project.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Sio.sys

The Sio.sys driver is a replacement for the com.sys driver. The Sio.sys driver can support up to 16 COM ports.

  DEVICE=C:\Os2\Boot\Sio.sys parameters

• DEVICE=C:bslbootbslSio.Sys (Cn, An, In, Ig, Fc) :hp4. [(Cn, An, In, Ig, Fc)] :ehp4.

o CN The number of the Com port or the string COM1 to COMn. If you use a * in front of the Com port, then the port will be used as a PCMCIA Com port.

o AN A hexnumber to define the I/O address of the Com port.

o IN The IRQ number (0 to 15) or the string IRQ0 to IRQ15. If you don't use this parameter, SIO will search for a IRQ.

o IG This exists only for compatibility with COM.SYS and is ignored by Sio.sys.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Snd16.sys

The Snd16.sys driver is used by the MAD16 soundcard.

  DEVICE=C:\Os2\Boot\Snd16.sys parameters

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Sockets.sys

Network driver.

  DEVICE=C:\Mptn\Potocol\Sockets.sys Parameter

Parameters:

• /c:value

Number of the COM port to which debug information should be send to. Value can be any valid COM port number . Default = 2

• /v

Display the banner at boot time.

• /uis:0

Turn of unique ID for select(). If this parameter is not set it defaults to ON .

• /mem:value

Number of 4kbyte clusters allocated at initialization time. Value can be in the range from 30 to 32766 . Default = 75

• /gdt:value

The maximum number of 64kbyte blocks the stack can allocate. Default = 80

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Spx.sys

Provides support for the Novell Netware SPX protocol.

  DEVICE=C:\Netware\Spx.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Ssmdd.sys

Is somewhere used by MMOS2.

  DEVICE=C:\Mmos2\Ssmdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Svdisk.sys

This is the driver for the Super Virtual Disk tool, which emulates a floppy drive in memory.

  DEVICE=C:\SVDisk\SVDisk.sys

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Sysinfo.sys

This driver is needed foby the System Information Tool.

  DEVICE=C:\Netfin\Sysinfo.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=TcpBeui.os2

This is the TCPBEUI (NetBIOS over TCP/IP) protocol driver.

  DEVICE=C:\Ibmcom\Protocol\TcpBEUI.os2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Testcfg.sys

Test configuration device driver.

  DEVICE=C:\Boot\Testcfg.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=USBAUDIO.SYS

Driver for USB audio devices. The only devices you can use with it at the moment are loudspeakers from Labtec.

  DEVICE=C:\Os2\Boot\USBAUDIO.SYS 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=USBCOM.SYS

Driver for USB modems. At the moment support is only available for some devices from IBM and US-Robotics. The Usbcom.sys driver emulates an aditional COM port, this allows you to use your terminal or Internet dialer software with the USB modem.

  DEVICE=C:\Os2\Boot\Usbcom.sys <parameters>

Parameters:

• /N:Value

Here can you control under which COM port number the USB device is available. Value can be in the range from 1 to 9 . It had to be a non used COM port number. The default value is the first non used COM port number.

• /V

With this parameter gives the driver you some status information during the boot.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=USBMOUSE.SYS

Driver for USB mouse. At the moment only some mouse from Logitech and IBM are supported.

  DEVICE=C:\Os2\Boot\USBMOUSE.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=USBPRT.SYS

Driver for USB printers.

  DEVICE=C:\OS2\BOOT\USBPRT.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=USBQSER.SYS

  DEVICE=C:\OS2\BOOT\USBQSER.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=USBSER.SYS

  DEVICE=C:\OS2\BOOT\USBSER.SYS

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
No	Yes	Yes	Yes	Yes	Yes

DEVICE=Uslgenio.sys

Driver for the TampV HappyPlayer, this driver can be used with TV-card which have a BT848, BT849, BT878 or a BT879 chip. This driver will not work with other TV applications.

   DEVICE=C:\Apps\HappyTV\Uslgenio.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=V8514a.sys

Virtual device driver for 8514 graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\V8514a.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vad64.sys

Virtual Device driver used by ATI 3D Rage graficcards. Gives support for DOS and WIN-OS/2.

 DEVICE=C:\OS2\Vad64.sys

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vapm.sys

Virtual device driver for Advanced Power Management used by DOS and Windows.

DEVICE=C:\Os2\Boot\Vapm.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vcdrom.sys

Virtual device driver for CDRom drives used by DOS and Windows.

 DEVICE=C:\Os2\Boot\Vcdrom.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=VCfos.Sys

Gives support for CFOS in DOS and Windows.

  DEVICE=C:\Cfos\Vcfos.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vcga.sys

Virtual device driver for CGA graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Mdos\Vcga.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vcom.sys

Virtual device driver for the serial Ports COMx, used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vcom.sys

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vcshdd.sys

Is needed for the video parts of MMOS2.

  DEVICE=C:\Mmos2\Vcshdd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vdostcp.sys

Virtual device driver for the TCP/IP protocol used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vdostcp.sys

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vdostcp.vdd

Virtual device driver for the TCP/IP protocol used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vdostcp.vdd 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vdpmi.sys

Supports the DPMI memory access and is required to support all Windows applications.

  DEVICE=C:\OS2\Mdos\Vdpmi.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vdpx.sys

This driver is the protected mode to real mode driver for DPMI applications.

  DEVICE=C:\OS2\Mdos\Vdpx.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vega.sys

Virtual device driver for EGA graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vega.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vemm.sys

Used to support Extended Memory use in DOS and Windows programs.

  DEVICE=C:\OS2\Mdos\Vemm.sys parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vfdisk.sys

Virtual Floppy Disk driver, it emulates a floppy drive in the memory.

  DEVICE=C:\Os2\Boot\Vfdisk.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vipx.sys

This driver enables the Novell Netware IPX support for DOS based Netware utilities.

  DEVICE=C:\Netware\Vipx.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vkbd.sys

Virtual device driver for the keyboard used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vkbd.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vmad16.sys

Virtual device driver for the MAD16 soundcard used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vmad16.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vmanwin.sys

This driver is used by your Graphiccard to support Windows.

  DEVICE=C:\OS2\Mdos\Vmanwin.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vmgax64.sys

Virtual device driver for Matrox graphic cards.

  DEVICE=C:\Mga\OS2\Vmgax64.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vmono.sys

Virtual device driver mono-graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vmono.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vmouse.sys

Virtual device driver for the mouse used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vmouse.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vnetapi.os2

This driver is part of the File and Print client for OS/2.

  DEVICE=C:\Ibmlan\Netprog\Vnetapi.os2 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vp9100.sys

Virtual device driver for Weitek P9100 based graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\VP9100.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vp91vga.sys

Virtual device driver for Weitek P9100 based graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vp91vga.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vpcmcia.sys

This driver gives support for PCMCIA cards in DOS and Windows sessions.

  DEVICE=C:\Boot\Vpcmcia.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vprpmi.sys

Private video PMI virtual device driver.

  DEVICE=C:\OS2\Mdos\Vprpmi.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vshell.sys

This dricver loads the Novell Netware network shell. It is automatically used for all DOS and Windows sessions that require it.

  DEVICE=C:\Netware\Vshell.sys parameter

Parameters:

Value can be Global or Local . Default = Global

Li. Global

All DOS, Windows and OS/2 sessions set up for global login support share a single login to a Netware server. Drive mappings and port captures from one session apply to all the other sessions. This is useful in environments where the number of connections is carefully monitored. :Li. Local All DOS and Windows sessions set up for private login support have their own logins to a Netware server. Drive mappings and port captures from one session do not apply to the other sessions. This is useful in environments where users need logins from DOS and Windows sessions to be separate from logins from OS/2 sessions.

You can change this parameter also in the DOS/Windows settings of each Program object.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vsio.sys

Virtual device driver for the serial ports COMx used by DOS and Windows. This is a replacement for the Vcom.sys driver.

  DEVICE=C:\Os2\Boot\Vsio.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vsvga.sys

Virtual device driver for SVGA graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vsvga.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vvga.sys

Virtual device driver for VGA graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vvga.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vw32s.sys

Supplies support for the WIN32S Windows APIs. Only needed for Windows programs that use WIN32S APIs.

  DEVICE=C:\OS2\Mdos\VW32S.sys parameters

note: This driver has no parameters.

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vwcat.sys

This driver is used by the Watchcat task killer.

  DEVICE=C:\user\watchcat\Vwcat.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vwin.sys

This driver provides seamless Windows support in Win-OS2.

  DEVICE=C:\OS2\Mdos\Vwin.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vxga.sys

Virtual device driver for XGA graphiccards used by DOS and Windows.

  DEVICE=C:\Os2\Boot\Vxga.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Vxms.sys

Supports Extended Memory in DOS and Windows applications.

  DEVICE=C:\OS2\Mdos\Vxms.sys parameter 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Watchcat.sys

This driver is used by the Watchcat task killer.

  DEVICE=C:\User\Watchcat\watchcat.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=Wcast.sys

This driver gives support for all PCI Hauppauge TV-cards. The USB versions are NOT supported.

  DEVICE=C:\MMOS2\Wcast.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes

DEVICE=XF86Sup.sys

Driver needed by XFree86/OS2, You will be unable to run XFree86/OS2 without the XF86sup.sys driver.

  DEVICE=C:\XFree86\lib\XF86Sup.sys 

Platform Support:

OS/2 2.x	OS/2 3.0	OS/2 4.0	OS/2 4.5x	eCS 1.x	eCs 2.x
Yes	Yes	Yes	Yes	Yes	Yes