UsbIrqRead

Description

Executes synchronous device-to-host Interrupt Transfer with a specific endpoint.

Syntax

ulrc = UsbIrqRead(Handle,ucEndpoint,ucAltSetting,pulNumBytes,pucData,ulTimeout)

Parameters

Handle

the Device Handle received from the previous UsbOpen.

ucEndpoint

the Endpoint Number with the Direction Bit set to one.

ucAltSetting

the Alternate Setting of the interface having this endpoint.

pulNumBytes

the address of the variable to specify/receive the number of bytes.

pucData

the address of the buffer to receive the data bytes transferred.

ulTimeout

the timeout to wait for completion in milliseconds.

Return Code

0x0000 - NO_ERROR

Errors

0x0006 - ERROR_INVALID_HANDLE
0x0008 - ERROR_NOT_ENOUGH_MEMORY
0x0057 - ERROR_INVALID_PARAMETER
0x005F - ERROR_INTERRUPT
0x0122 - ERROR_TOO_MANY_HANDLES
0x0280 - ERROR_TIMEOUT
0x1B58 - USB_NOT_INIT
0x1B5B - USB_ERROR_INVALID_ENDPOINT
0x4000 - USB_IORB_REQUEST
0x80XX - USB_IORB_FAILED

Example Code

//Code Snippet - UsbIrqRead
{
  APIRET ulrc;
  PUCHAR pucData;
  PULONG pulNumBytes;
  UCHAR ucAltSetting = 0;
  UCHAR ucData[4096];
  UCHAR ucEndpoint = 0x81;
  ULONG ulNumBytes = sizeof(ucData);
  ULONG ulTimeout = 8000;

  pucData = &ucData[0]; pulNumBytes = &ulNumBytes;
  ulrc = UsbIrqRead(Handle,ucEndpoint,ucAltSetting,pulNumBytes,pucData,ulTimeout);
  printf("\nUsbIrqRead - ulrc: 0x%04X (%hu)",ulrc,ulrc);
  if (!ulrc) //success
  {
    int i; printf(" - interrupt data:\n");
    for (i=0;i<ulNumBytes;i++) printf("%02X",ucData[i]);
  }
}