MONMOU01.SYS: Difference between revisions
Created page with "Serial Touchscreen Controller on PC-Bus System DEVICE=MONMOU01.SYS <parameter> '''Parameter:''' where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the..." |
mNo edit summary |
||
| Line 3: | Line 3: | ||
'''Parameter:''' | '''Parameter:''' | ||
where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller. | where is: | ||
:4035 for the IntelliTouch E281-4035 PC-Bus controller. | |||
:4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. | |||
:2201 for the AccuTouch E271-2201 PC-Bus con troller. | |||
:141 for the AccuTouch E271-141 PC-Bus controller. | |||
matches the jumper settings on the controller. | matches the jumper settings on the controller. | ||
Revision as of 22:59, 26 November 2016
Serial Touchscreen Controller on PC-Bus System
DEVICE=MONMOU01.SYS <parameter>
Parameter: where is:
- 4035 for the IntelliTouch E281-4035 PC-Bus controller.
- 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers.
- 2201 for the AccuTouch E271-2201 PC-Bus con troller.
- 141 for the AccuTouch E271-141 PC-Bus controller.
matches the jumper settings on the controller.
matches the interrupt jumper on the controller.
NOTE: Disabling the COM Drivers If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.
NOTE: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.
Platform Support:
| OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
|---|---|---|---|
| No | No | Yes | Yes |