DBG C WriteMem I: Difference between revisions

Revision as of 14:00, 10 March 2020

Debug Command 4 and 5 - Write Word Command

Parameters

Pid= Process ID of debuggee
Addr= Address to write to
Value= Word to write
Cmd= DBG_C_WriteMem_I, or DBG_C_WriteMem_D, or DBG_C_WriteMem_I

The commands DBG_C_WriteMem_I, DBG_C_WriteMem_D, and DBG_C_WriteMem_I are identical.

Returns

The word in Value is written to the specified address.

In the case of a write to shared read-only memory, the memory is converted to private, and any set dynamic RAS tracepoints are removed from that memory, before the write is performed.

The area will continue to be shared by other processes, if any. In this way, breakpoints may be set in the debuggee without affecting the other modules.

Restrictions

You are unable to write to any memory outside user space.

The high-order word of Value is ignored.

@@ Line 1: / Line 1: @@
-Debug Command 4 and 5 - Write Word Command
+{{DISPLAYTITLE:DBG_C_WriteMem_I}}
+Debug Command 4 and 5 - Write Word Command
-;Parameters
-*Pid= Process ID of debuggee
-*Addr= Address to write to
-*Value= Word to write
-*Cmd= DBG_C_WriteMem_I, or DBG_C_WriteMem_D, or DBG_C_WriteMem_I
-The commands DBG_C_WriteMem_I, DBG_C_WriteMem_D, and DBG_C_WriteMem_I are identical.
-;Returns
-The word in Value is written to the specified address.
+;Parameters
+*Pid= Process ID of debuggee
+*Addr= Address to write to
+*Value= Word to write
+*Cmd= DBG_C_WriteMem_I, or DBG_C_WriteMem_D, or DBG_C_WriteMem_I
+The commands DBG_C_WriteMem_I, DBG_C_WriteMem_D, and DBG_C_WriteMem_I are identical.
-In the case of a write to shared read-only memory, the memory is converted to private, and any set dynamic RAS tracepoints are removed from that memory, before the write is performed.
+;Returns
+The word in Value is written to the specified address.
-The area will continue to be shared by other processes, if any. In this way, breakpoints may be set in the debuggee without affecting the other modules.
+In the case of a write to shared read-only memory, the memory is converted to private, and any set dynamic RAS tracepoints are removed from that memory, before the write is performed.
-;Restrictions
+The area will continue to be shared by other processes, if any. In this way, breakpoints may be set in the debuggee without affecting the other modules.
-You are unable to write to any memory outside user space.
+;Restrictions
+You are unable to write to any memory outside user space.
 The high-order word of Value is ignored.
-[[Category:DBG_C]]
-{{DISPLAYTITLE:DBG_C_WriteMem_I}}