Jump to content

NETBIOS.SYS: Difference between revisions

From EDM2
Ak120 (talk | contribs)
Created page with "Loads support for the NETBIOS protocol. DEVICE=NETBIOS.SYS '''TIP:''' If you do not use NETBIOS applications, you can remove the NETBIOS driver from the config.sys and the N..."
 
Ak120 (talk | contribs)
mNo edit summary
Line 2: Line 2:
  DEVICE=NETBIOS.SYS
  DEVICE=NETBIOS.SYS


'''TIP:''' If you do not use NETBIOS applications, you can remove the NETBIOS driver from the config.sys and the NETBIOS section from the PROTOCOL.INI to remove some of the confusion this creates. You should also remove the virtual netbios drivers at the same time since these bind onto the NETBIOS driver and not the LM10 interface (which is why they appear after the [[NETWKSTA.SYS]] driver, so it can "eat" its resources first, then what is left over is assigned to NETBIOS.SYS). [<- Note: this should be NETBIOS.OS2] (The mentioned virtual NETBIOS drivers are \IBMCOM\PROTOCOL\LANPDD.OS2 and LANVDD.OS2)  
'''TIP:''' If you do not use NETBIOS applications, you can remove the NETBIOS driver from the config.sys and the NETBIOS section from the PROTOCOL.INI to remove some of the confusion this creates. You should also remove the virtual Netbios drivers at the same time since these bind onto the NETBIOS driver and not the LM10 interface (which is why they appear after the NETWKSTA.SYS driver, so it can "eat" its resources first, then what is left over is assigned to NETBIOS.SYS). [<- Note: this should be NETBIOS.OS2]
 
(The mentioned virtual NETBIOS drivers are \IBMCOM\PROTOCOL\[[LANPDD.OS2]] and [[LANVDD.OS2]])


'''Platform Support:'''
{| class="wikitable"
{| class="wikitable"
|-
|+Platform Support:
!OS/2 2.x
!OS/2 2.x
!OS/2 3.0
!OS/2 3.0
Line 12: Line 13:
!OS/2 4.5x
!OS/2 4.5x
|-
|-
|Yes
|
|Yes
|C
|Yes
|Yes
|Yes
|Yes

Revision as of 17:47, 10 March 2017

Loads support for the NETBIOS protocol.

DEVICE=NETBIOS.SYS

TIP: If you do not use NETBIOS applications, you can remove the NETBIOS driver from the config.sys and the NETBIOS section from the PROTOCOL.INI to remove some of the confusion this creates. You should also remove the virtual Netbios drivers at the same time since these bind onto the NETBIOS driver and not the LM10 interface (which is why they appear after the NETWKSTA.SYS driver, so it can "eat" its resources first, then what is left over is assigned to NETBIOS.SYS). [<- Note: this should be NETBIOS.OS2]

(The mentioned virtual NETBIOS drivers are \IBMCOM\PROTOCOL\LANPDD.OS2 and LANVDD.OS2)

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
C Yes Yes