USBCDROM.ADD: Difference between revisions

Latest revision as of 23:05, 20 June 2019

USB CD-ROM Device Driver.

Tests were performed for following devices:

BASEDEV=USBCDROM.ADD <parameters>

/V: Verbose
/CDS:n: The number of CD-ROM/CD-RW devices to be served. The default is 1. To remove service the key value must be set to 0.

NOTE: For Warp 3 systems, the number of CD-ROM devices served must be specified by the USBMSD.ADD statement in CONFIG.SYS as follows:

BASEDEV=USBMSD.ADD /CDS:1

@@ Line 1: / Line 1: @@
 {{ProdS |V40=S|V45=S}}
-USB CD-ROM Device Driver
+USB CD-ROM Device Driver.
- BASEDEV=USBCDROM.ADD <parameters>
-Tests are performed for following devices:
+Tests were performed for following devices:
 * HP USB CDWriter 8200
 * USB Sony Supressa CD-RW
-'''Parameter:'''
+==Syntax==
-* /V
+ BASEDEV=USBCDROM.ADD <parameters>
-Verbose
-* /CDS:n
+==Parameter==
-The number of CD-ROM/CD-RW devices to be served. The default is 1. To remove service the key value must be set to 0.
+;/V: Verbose
+;/CDS&#58;n: The number of CD-ROM/CD-RW devices to be served. The default is 1. To remove service the key value must be set to 0.
-'''NOTE:''' For Warp 3 systems, the number of CD-ROM devices served must be specified on the USBMSD.ADD statement in CONFIG.SYS as follows:
+'''NOTE:''' For Warp 3 systems, the number of CD-ROM devices served must be specified by the [[USBMSD.ADD]] statement in CONFIG.SYS as follows:
   BASEDEV=USBMSD.ADD /CDS:1
 [[Category:BASEDEV Statements]]