IOMGDRV.FLT: Difference between revisions

Latest revision as of 04:16, 22 July 2023

Filter driver for the Iomega internal SCSI drives.

BASEDEV=IOMGDRV.FLT

Adapters:

Drives:

See also: OS2.SYS

TIP: There is no longer any reason to use these drivers unless you need to use the protect utility to password protect your disks. Better use the new OS2DASD.DMD

Works with any OS/2 supported SCSI card.
Allows you to use multiple SCSI devices on your SCSI card.
Compatible with the format that the disks come with from the factory (in non-fixed mode).

Slow, unless you use fixed mode.
Fixed mode must be partitioned and, as such, all cartridges must be partitioned and will no longer work with DOS, Windows, or OS/2 not running with fixed mode drivers.
In fixed mode, disks have to be unmounted and remounted using a utility before they can be ejected and after they have been reinserted.
Needs HPFSRem to gain HPFS removability support.

@@ Line 1: / Line 1: @@
-Driver for the Iomega internal SCSI drives.
+Filter driver for the Iomega internal SCSI drives.
   BASEDEV=IOMGDRV.FLT
+==Parameter==
+*/FIXED:
+==Supported Devices==
+Adapters:
+*PC1600 16 bit SCSI adapter
+*Zip Zoom accelerator card
+*Jaz Jet
+Drives:
+*Multidisk 150
+*Bernoulli 230
+*Zip 100 SCSI (internal)
+*Jaz 1GB
+See also: [[OS2.SYS]]
+----
 ;TIP: There is no longer any reason to use these drivers unless you need to use the protect utility to password protect your disks. Better use the new [[OS2DASD.DMD]]
@@ Line 14: / Line 31: @@
 *Needs HPFSRem to gain HPFS removability support.
-{{ProdS |V21=*|V22=*|V30=S|V31=S|V40=S|V45=S}}
+{{ProdS |V21=C|V22=C|V30=C|V31=C|V40=*|V45=*}}
 [[Category:BASEDEV Statements]]