Jump to content

CONFIG.SYS - DEVICE Statements: Difference between revisions

From EDM2
← Older edit
 
(425 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[The Config.sys Documentation Project|Return to The Config.sys Documentation Project Main Page]]
{{CFGProject}}
Device Drivers are needed by OS/2 to work with your installed hardware.  


Device Drivers are needed by OS/2 to work with your installed hardware. The Device Drivers are loaded after the Base Device Drivers Unlike the Base Device Drivers, the Device Drivers are loaded in the order they appear in the config.sys file. The following pages describe these entries:
The Device Drivers are loaded after the Base Device Drivers. Unlike them the Device Drivers are loaded in the order they appear in the CONFIG.SYS file.  


=DEVICE=$ICPMOS2.SYS=
The following pages describe these entries:
Power Management Driver for PCMCIA


  DEVICE=$ICPMOS2.SYS
==Chipset Support==
===PC Card/CardBus===
*[[$ICPMOS2.SYS]] - PC Card Power Management


'''ATTENTION:''' Must be after all other listed drivers in the config.sys.  
===PCI===
*[[SPCIIRQ.SYS]] - PCI IRQ assignment


'''Platform Support:'''
===Power Management===
{| class="wikitable" style="text-align:center" border="1"
*[[APM.SYS]] - Advanced Power Management
|-
*[[APM_NH.SYS]] - APM NH
!OS/2 2.x
*[[OS2SPEED.SYS]]
!OS/2 3.0
*[[POWERSV.SYS]]
!OS/2 4.0
*[[RESUME.SYS]] - Toshiba OS/2 AutoResume
!OS/2 4.5x
*[[VIAAPM.SYS]] - VIA APM
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}


=DEVICE=ACCND.OS2=
===Processor===
ACCTON EN1207D Series Ethernet PCI Adapter NDIS driver:
*[[CYRIX.SYS]] -  Cyrix 486DLC internal cache.
http://www.accton.com/accton/products/adapters/en1207d_wol/base.html
*[[OS2OGL.SYS]] - Pentium Pro optimised Open GL.
Network card in IBM's netvista 6269N2G
*[[P6K7MTRR.SYS]] - MTRR setting
*[[P6MTRR.SYS]] - MTRR setting
*[[RDMSR.SYS]]


  DEVICE=ACCND.OS2
==Storage==
*[[ADSMSDIS.SYS]]
*[[ADSMTAPE.SYS]]
*[[ATOS2HC.SYS]] - HardCardII-XL card
*[[ASPIPFA.SYS]]
*[[ASPITAPE.SYS]]
*[[CB2ASPI.SYS]]
*[[CDBASPI.SYS]] - MSR Backmaster
*[[CDMGRDRV.SYS]] - CD-ROM Manager
*[[CDD.SYS]]
*[[CMDLINE.SYS]]
*[[DELIVERY.SYS]]
*[[DRVOQ117.SYS]] - QIC-117
*[[EXT5DD.SYS]] - PS/2 External 5.25-Inch 1.2MB Diskette.
*[[GENSCSI.SYS]]
*[[IDEHDD.SYS]]
*[[KBZIP100.SYS]]
*[[NOVADRV.SYS]] - NovaStor
*[[NOVASPI.SYS]]
*[[OS2.SYS]] - Iomega OAD
*[[OS2EASY.SYS]] - Altec Easy Drive
*[[MEDIAOS2.SYS]] - Altec MediaDrive
*[[PCMSSDIF.SYS]]
*[[PTDVR.SYS]] - MSR Backmaster
*[[RSJSCSI.SYS]] - RSJ
*[[SDI_SCSI.SYS]]
*[[SEAGB24.SYS]] - Sytos
*[[SVDISK.SYS]] - Super Virtual Disk
*[[TC15DVR.SYS]] - MSR Backmaster
*[[TTDVR.SYS ]] - MSR Backmaster
*[[VDISK.SYS]]
*[[VFDISK.SYS]]
*[[WKAA150W.SYS]] - Wangtek PC02 QIC 150Mb tape drive.


'''Platform Support:'''
==Network Adapters==
{| class="wikitable" style="text-align:center" border="1"
===NDIS MAC===
|-
*[[NULLNDIS.OS2]] - NULL NDIS
!OS/2 2.x
*[[ODI2NDI.SYS]] - Netware
!OS/2 3.0
*[[PMAC.OS2]] - SSW Parallel NDIS
!OS/2 4.0
*[[PRANDIS.OS2]] - Parallel Port NDIS
!OS/2 4.5x
*[[SVSNET.SYS]] - Serenity Virtual Net
!eCS 1.x
*[[SWITCH.OS2]] - Virtual PC for OS/2 Virtual Switch
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}


=DEVICE=ACECAD.SYS=
;Arcnet
Driver for the ACECATIII digitizing board.
*MSARC.OS2 - Microsoft Arcnet
  DEVICE=ACECAD.SYS
*SMC_ARC.OS2 - SMC ARCNET PS110, PC110-PC650
for working DEVICE=E:\OS2\BOOT\MOUSE.SYS STYPE=ACECAD$ must be added
*TCCARC.OS2 - Thomas-Conrad Arcnet


'''Platform Support:'''
;DirecPC
{| class="wikitable" style="text-align:center" border="1"
*[[BICDD.SYS]] - Hughes Network Systems DirecPC ISA Adapter
|-
*[[IBMNETA.OS2]]
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}


=DEVICE=AD1816DD.SYS=
;Ethernet
Analog Devices AD1816 Soundport Driver
*[[ACCND.OS2]] - ACCTON EN1207D Series Ethernet PCI
*AM2100.OS2 - AMD Series 2100
*[[ASNPCI.OS2]] - Asante Fast 10/100 PCI
*B44A.OS2 - Broadcom BCM4401
*[[B57.OS2]] - Broadcom NetXtreme
*[[CBENDIS.OS2]] - Xircom CardBus 10/100
*[[CE3NDIS.OS2]] - Xircom Ethernet 10/100
*COMETA.NIF - ADMtek Comet/Centaur
*[[DC21X4.OS2]] - DEC/Intel DC21X4X
*DE100.OS2 - D-Link DE-100 Ethernet Card
*DE200.OS2 - D-Link DE-200
*DE220.OS2 - D-Link DE-220
*DE250.OS2 - D-Link DE-250
*DE300.OS2 - D-Link DE-300 Ethernet Card
*[[DE305.OS2]] - DEC EtherWORKS ISA
*DE320.OS2 - D-Link DE-320CT Ethernet Card
*DE400.OS2 - D-Link DE-400 EISA
*[[DE450.OS2]] - DEC EtherWORKS TURBO PCI
*DE500.OS2 - D-Link DE-500 VESA Bus Master Ethernet Card
*[[DE528.OS2]] - D-Link DE-528CT PCI
*DE600.OS2 - D-Link DE-600
*DE620.OS2 - D-Link DE-620 Pocket LAN
*DE65S.OS2 - D-Link DE-650 PCMCIA
*DE660.OS2 - D-Link DE-660 PC Card
*[[DEPCA.OS2]] - DEC EtherWORKS (LC, MC, EISA, Turbo)
*[[DFE650.OS2]] - D-Link DFE-650 PC Card
*[[DLKFET.OS2]] - D-Link DFE-530TX
*[[DLKPCI.OS2]] - D-Link Fast Ethernet PCI
*[[DLKRTS.OS2]] - D-Link DFE-530TX+
*[[DM9PCI.OS2]] - Davicom DM9xxx PCI
*DP815A.OS2 - NSC DP83815
*[[DP820A.SYS]] - NS DP83820
*[[DP83815.OS2]] - NS DP83815
*[[DP83820.OS2]] - NS DP83820 Gigabit
*[[E1000.OS2]] - Intel PRO/1000
*[[E100B.OS2]] - Intel EtherExpress PRO/100
*[[E10P.OS2]] - Intel EtherExpress PRO/10 PCI
*[[E11ND.OS2]] - Cabletron E11 Ethernet Adapter
*E20NDIS.OS2 - Cabletron E2010
*[[E21ND.OS2]] - Cabletron E21 Ethernet Adapter
*[[E22ND.OS2]] - Cabletron E22 Ethernet
*E31ND.OS2 - Cabletron E31 Ethernet Adapter
*[[EC2T.OS2]] - Linksys Combo PCMCIA
*ED586.OS2 - Eden ED586/32
*[[EL515.OS2]] - 3Com Fast EtherLink ISA
*[[EL59X.OS2]] - 3Com EtherLink PCI
*[[EL90X.OS2]] - 3Com Fast EtherLink XL
*[[ELNK.OS2]] - 3Com EtherLink
*[[ELNK16.OS2]] - 3Com EtherLink 16 (3c507)
*[[ELNK3.OS2]] - 3Com EtherLink III
*[[ELNKII.OS2]] - 3Com EtherLink II (3c503)
*[[ELNKMC.OS2]] - 3Com EtherLink/MC (3c523)
*[[ELNKPL.OS2]] - 3Com EtherLink Plus (3C505)
*[[ELPC3.OS2]] - 3Com 3C589 EtherLink III
*[[EN5251.OS2]] - Accton EN5251
*[[ENDS2ISA.OS2]] - Crystal CS89x0
*ENET.OS2 - Compex ENET Ethernet
*[[EP325.OS2]] - Surecom EP-325
*[[EP427.OS2]] - SureCom EP-427
*[[EPRO.OS2]] - Intel EtherExpress PRO/10
*ES3210.OS2 - Racal-Datacom ES3210 EISA
*[[ET32ND.OS2]] - KTI PCI Ethernet
*ETHIIE.OS2 - ICL EtherTeam 16
*ETHNE.OS2 - Accton EtherCoax 16N
*[[ETHPCI.OS2]] - Accton EN1207
*[[EXP16.OS2]] - Intel EtherExpress 16
*EXP32.OS2 - Intel EtherExpress/32
*[[FASTNIC.OS2]] - PCI 10/100 Fast Ethernet Adapter
*[[FETND.OS2]] - VIA Fast Ethernet
*HLS6130.OS2 - Hughes LAN Systems HLS-6130
*HPLAN.OS2 - Hewlett Packard Ethertwist/MC
*HPLANB.OS2 - Hewlett Packard Ethertwist
*HPLANE.OS2 - Hewlett Packard Ethertwist EISA LAN Adapter/32
*HPLANP.OS2 - Hewlett Packard PC LAN Adapter/16+
*I82593.OS2 - Intel 82593 Motherboard LAN Module
*IBMEANDI.OS2 - IBM PCI Ethernet Adapter Driver
*IBMEINDI.OS2 - IBM EtherJet ISA Ethernet Adapter
*[[IBMENI.OS2]] - IBM LAN Adapter for Ethernet
*[[IBMENII.OS2]] - IBM LAN Adapter/A for Ethernet
*IBMESAN2.OS2 - IBM EISA Ethernet Adapter
*IBMEXNDI.OS2 - IBM EtherJet PC Card Ethernet Adapter
*[[IBMFE.OS2]] - IBM 10/100 EtherJet PCI
*IBMGC.OS2 - IBM 1000BaseT Gigabit Ethernet Adapter
*[[IBMGE.OS2]] - IBM 1000BaseSX Gigabit Ethernet
*IBMGU.OS2 - IBM Gigabit Ethernet Adapter
*[[KTC110.OS2]] - Kingston EtheRx
*[[KTC111.OS2]] - Kingston Fast EtheRx KNE111TX
*[[KTC120.OS2]] - Kingston EtheRx
*[[KTC40.OS2]] - Kingston EtheRx PCI
*[[L100.OS2]] - PNIC
*[[LNEPCI.OS2]] - Linksys LNE100TX
*[[LNE100.OS2]] - Linksys LNE100TX v4
*MAC586.OS2 - DCA/10NET
*MACETH.OS2 - IBM PS/2 Adapter for Ethernet Networks
*MACEVX.OS2 - Everex SpeedLink EV2026/EV2027
*MACWD.OS2 - Western Digital EtherCard Plus
*[[MCS7830.OS2]] - Moschip MCS7830
*[[MMLEM.OS2]] - Intel® PRO/1000 Legacy NIC Driver
*[[MXNICF.OS2]] - Macronix MX987xx
*[[N100.OS2]] - Compaq Fast Ethernet
*NCC16.OS2 - Tulip NCC-16
*[[NE1000.OS2]] - Novell NE1000
*[[NE2000.OS2]] - Novell NE2000
*NE3200.OS2 - Novell NE3200
*[[NETFLX3.OS2]] - Compaq NetFlex-3/Netelligent
*NI5210.OS2 - Racal-Datacom NI5210
*NI6510.OS2 - Racal-Datacom NI6510
*NI9210.OS2 - Racal-Datacom NI9210
*NSEISA.OS2 - National Semiconductor SONIC EISA
*[[PC100.OS2]] - Linksys EtherFast 10/100 PC Card
*[[PCIND.OS2]] - Realtek RTL8029 PCI
*[[PCMNICCS.OS2]] - IBM Ethernet Adapter PCMCIA
*[[PCNTND.OS2]] - AMD PCNet
*PDIETH.OS2 - PureData PDI8023
*[[PNPND.OS2]] - Realtek RTL8019 ISA PnP
*RCE.OS2 - RCE 10Base-T 8-/16-Bit
*RMATETH.OS2 - Research Machines Ethernet
*RMMCETH.OS2 - Research Machines Ethernet MC
*[[RTFND.OS2]] - Realtek RTL8129 PCI Fast Ethernet
*[[RTGNDA.OS2]] - Realtek RTL8168 Gigabit
*RTL09.OS2 - Realtek RTL8009 ISA Ethernet Adapter
*[[RTSND.OS2]] - Realtek RTL8139
*[[SIS900.OS2]] - SiS 900/7016
*SK98ND.OS2 - SysKonnect SK-9E21D, SK-9521
*[[SMC1208.OS2]] - SMC EZ PCI
*SMC3016 - SMC 3016 Series
*[[SMC8000.OS2]] - SMC 8xxx
*[[SMC9432.OS2]] - SMC EtherPower II
*SMCMAC.OS2 - SMC EtherCard PLUS ELITE Series
*[[SMCND.OS2]] - SMC 1211TX
*[[SMCPWR.OS2]] - SMC EtherPower
*SPIDER.OS2 - Spider Systems
*[[TC902X.OS2]] - Tamarack TC9021
*TNDIS.OS2 - Tiara EtherStar LanCard/E
*TSBETHER.OS2 - ToshibaLAN Internal
*UBNEI.OS2 - Ungermann-Bass PCNIU
*[[USBETHR.OS2]] - Kawasaki USB Ethernet 10Mbit
*[[VGEND2.OS2]] - VIA VT612x Velocity
*[[W840ND.OS2]] - Winbond W89C840
*[[W940ND.OS2]] - Winbond W89C940
*[[XCEMNDIS.OS2]] - Xircom CEM56-100
*[[ZX312.SYS]] - ZNYX ZX312 EtherAction


  DEVICE=AD1816DD.SYS
;FDDI
*AT_LM.OS2 - Network Peripherals NP-AT
*[[DEFEA.OS2]] - DEC FDDIcontroller/EISA
*[[DEFPA.OS2]] - DEC FDDIcontroller/PCI
*DF300.OS2 - D-Link DF300
*DF400.OS2 - D-Link DF400
*EISA_LM.OS2 - Network Peripherals NP-EISA
*FDDILINK.OS2 - 3Com FDDILink
*FLINK.OS2 - 3Com FDDILink PCI
*[[IBMFDX.OS2]] - IBM FDDI FI Adapter
*SKFE.OS2 - SK-NET FDDI EISA
*SKFI.OS2 - SK-NET FDDI ISA
*SKFM.OS2 - SK-NET FDDI MCA
*SKFPNO.OS2 - SK-NET FDDI PCI


'''Parameter:'''
;Infrared
* /N:$strng$
*[[IRDANDIS.OS2]] - IrDA
Device driver name assigned by MINSTALL
*[[IRDNDIS.OS2]] - Infrared NDIS
* /3:y
3D Phase expansion (0-31)


'''NOTE:''' The Aztech SC16-3D sound card has an Analog Devices AD1816 chip whose drivers should work, in theory. The problem is that this card does not report itself as a standard AD1816 based board, so even though the PnP-Manager correctly initializes the card, the
;Intelligent Boards
driver can neither recognize the board nor pick up the IRQ, I/O, and DMA values from the PnP-Manager. Martin Schaffoener (martin.schaffoener@student.uni-magdeburg.de) patched the driver so it will work also with this card. Search for azsc163d.zip
*[[DGAFGP.OS2]] - DigiBoard


=DEVICE=ADSMSDIS.SYS=
;ScaNet
Personally Safe n Sound tape backup driver that from Warp Server for E-Business
*[[PC04.OS2]] - ScaNet x104/05


  DEVICE=ADSMSDIS.SYS
;Token-Ring
*CPQTOK.OS2 - Compaq Token Ring Adapter
*DLKTOK.OS2 - D-Link DT-650
*DT620.OS2 - D-Link DT-620
*[[EISANDIS.OS2]] - Racore EISA TR
*[[IBM16TR.OS2]] - IBM Token-Ring Network 16/4 Adapter II
*IBMEITR.OS2 - IBM 16/4 Busmaster EISA Adapter
*[[IBMMPC.OS2]] - IBM Auto LANStreamer PCI
*[[IBMTOK.OS2]] - IBM Token-Ring
*IBMTOKCS.OS2 - IBM Turbo 16/4 Token-Ring PC Card
*IBMTOKMP.OS2 - IBM SMP Token-Ring
*IBMTRBM.OS2 - IBM Token-Ring Bus Master
*[[IBMTRP.OS2]] - IBM Token-Ring PCI
*INTEL16.OS2 - Intel TokenExpress 16/4
*INTEL32.OS2 - Intel TokenExpress EISA/32
*MDGND.OS2 - Madge
*NCRTRN.OS2 - NCR Token-Ring Adapter
*OLITOK.OS2 - Olicom, Intel TokenExpress
*OLITOK16.OS2 - Olicom Token-Ring Network 16/4 Adapter
*[[RESETOKN.SYS]] - Reset the token-ring card before startup the LSP drivers
*[[RCPTRNDS.OS2]] - Racore Preferred Token Ring
*[[RTR16NDIS.OS2]] - Racore 16/4 Token-Ring Adapter
*SMARTND.OS2 - Madge Networks Smart 16/4
*SMC8100.OS2 - SMC TokenCard EliteSeries
*[[SMC8332.OS2]] - SMC TokenCard Elite Master32
*T20NDIS.OS2 - Cabletron T2015 4/16 Mbps DNI
*T30NDIS.OS2 - Cabletron T3015 4/16 Mbps DNI
*TCCTOK.OS2 - Thomas-Conrad Token Ring
*TL3C3X9.OS2 - 3Com TokenLink PCI
*TLNK.OS2 - 3Com TokenLink (3C603)
*[[TLPC3.OS2]] - 3Com TokenLink PCCard
*TOKWD.OS2 - Western Digital TokenCard WD8005/WD8015
*[[TR2KNDIS.OS2]] - Texas Instruments TokenLite


'''Platform Support:'''
;VG AnyLAN
{| class="wikitable" style="text-align:center" border="1"
*[[HPFEND.OS2]] - HP DeskDirect 10/100
|-
*[[RVGNDIS.OS2]] - Racore 10/100 AnyLAN
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}


=DEVICE=ADSMTAPE.SYS=
;Wireless
Personally Safe n Sound tape backup driver that from Warp Server for E-Business.
*[[AIRO340.SYS]] - Cisco Systems 340 Series Wireless
*[[ARLTNDIS.OS2]] - ARtem Onair ComCard 11 PCCard
*[[BIXANDIS.OS2]] - BinTec XAIR
*IBMPRISM.OS2 - IBM miniPCI PRISM 2.5 Wireless Card
*IBMWIFI2.OS2 - IBM High Rate Wireless LAN PC Card-128
*[[IRMAC.OS2]]
*WAVELAN.OS2 - NCR WaveLAN AT & MC


  DEVICE=ADSMTAPE.SYS
===NDIS Protocols===
*[[AFINET.SYS]] - NDIS Internet Protocol
*[[AFINETK.SYS]]
*[[AFLEAN.SYS]]
*[[AFNB.SYS]] - NetBIOS protocol driver
*[[AFOS2.SYS]] - Local IPC
*[[ATALK.SYS]] - Appletalk
*[[ATKP.SYS]] - Appletalk PAP
*[[CDMF.SYS]] - Commerical Data Masking Facility
*[[DES.SYS]] - Encryption
*[[ETALK.SYS]] - Appletalk protocol stack driver
*[[FWIP.SYS]] - Firewall built into IBM TCP/IP 4.1 and above.
*[[INET.SYS]]
*[[IPSEC.SYS]]
*[[KDBNET.SYS]] - Kernel debug
*[[LANDD.OS2]] - IBM IEEE 802.2
*[[LANDD.SYS]]
*[[LANDLLDD.OS2]] - IBM IEEE 802.2 low level
*[[LANDLLDD.SYS]]
*[[LANPDD.OS2]]
*[[LANPDD.SYS]]
*[[LANVDD.OS2]]
*[[LANVMEM.SYS]] - Memory allocation for MVDMs
*[[MD5.SYS]]
*[[NETBEUI.OS2]] - IBM OS/2 NETBIOS
*[[NETBIOS.OS2]] - NetBIOS
*[[NETBIOS.SYS]]
*[[ODI2NDI.OS2]] - IBM NetWare Requester support
*[[SOCKETS.SYS]] - Common Transport Sockets
*[[SOCKETSK.SYS]] - Common Transport Sockets
*[[TCPBEUI.OS2]] - NETBIOS over TCP


'''Platform Support:'''
===NetWare Requester===
{| class="wikitable" style="text-align:center" border="1"
*[[IPX.SYS]] - IPX protocol
|-
*LANSUP.SYS
!OS/2 2.x
*[[LSL.SYS]] - Link Support Layer
!OS/2 3.0
*[[NETBIOS.SYS]] - NetBIOS
!OS/2 4.0
*[[NMPIPE.SYS]] - Named Pipes
!OS/2 4.5x
*[[NPSERVER.SYS]] - Named Pipes server
!eCS 1.x
*[[NWREQ.SYS]] - requester module
!eCs 2.x
*[[ROUTE.SYS]] - source routing
|-
*[[SPX.SYS]] - SPX protocol
|No
|No
|No
|Yes
|Yes
|Yes
|}


DEVICE AFINET.SYS
LAN interfaces for ARCNET
Part of the TCP/IP Protocol Drivers.
*RXNET_AT.SYS - SMC PS110, Novell RX-Net
*RXNET_MC.SYS - Novell RX-Net/MC
*TRXNET.SYS
*TRXNET2.SYS


  DEVICE=C:\Mptn\Potocol\Afinet.sys
LAN interfaces for Ethernet
*3C501.SYS - 3Com EtherLink 3C501
*3C503.SYS - 3Com EtherLink 3C503
*3C505.SYS - 3Com EtherLink 3C505
*3C523.SYS - 3Com EtherLink/MC 3C523
*E3C501.SYS - 3Com EtherLink 3C501
*NE1000.SYS - Novell NE1000
*NE2000.SYS - Novell NE2000
*NE2.SYS - Novell NE/2
*NE2-32.SYS
*WD.SYS - Western Digital 8003E. 8003EP, 8013EB, 8013EP/A, 8013W, 8013EW, 8013WP/A


'''Platform Support:'''
LAN interfaces for PC Network
{| class="wikitable" style="text-align:center" border="1"
*PCN2_AT.SYS - IBM PC Network Adapter
|-
*PCN2_MC.SYS - IBM PC Network Adapter/A
!OS/2 2.x
*PCN2.SYS
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}


=DEVICE=AFINETK.SYS=
LAN interfaces for Token-Ring
32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak13 for Warp 4
*TOKEN.SYS - IBM Token-Ring adapters
Part of the TCP/IP Ver. 4.x firewall
*TOKENEE.SYS or CMGRLAN.SYS


  DEVICE=AFINETK.SYS
===ODI===
*[[CBEODI.OS2]] - Xircom CardBus
*[[CPQNF3.SYS]] - Compaq NETFLEX-3
*GEAT2ODI.SYS - G/Ethernet 16-bit AT adapter
*GEMC20DI.SYS - G/Ethernet Microchannel adapter
*[[NTR2000.SYS]] - Novell NTR2000
*OS2MLID.SYS - Accton Ethernet
*[[PCIOS2.SYS]] - Realtek RTL8029
*[[RTSOS2.SYS]] - Realtek RTL8139
*[[SMC8000.SYS]] - SMC/WD EtherCard
*TROPODI.SYS - Accton RingPair-4/16T
*TRPKTODI.SYS - Accton RingPocket
*[[XCEMODI.OS2]] - Xircom CEM56-100


'''Parameter:'''
==Communications==
* /V
*[[APEXDFM1.OS2]] - Apex PCMCIA modem.
Verbose, shows version-number
*[[ASP.SYS]] - ARNET SmartPort Plus.
*[[CD1400.SYS]] - RISC COM CD1400.
*[[COM01A.SYS]] - AST 4-port.
*[[COM02.SYS]]
*[[DGX.SYS]] - DigiBoard
*[[DTSXPC01.SYS]]
*[[DSP100.SYS]] - Quatech DSP-100 PCMCIA Dual RS-232 serial port.
*[[DSP200.SYS]] - Quatech DSP-200/300 PCMCIA Dual RS-422/RS-485 serial port.
*[[DUNTLW01.SYS]]
*[[ECRDRV.SYS]] - Remote Support.
*[[ESP.SYS]] - SIO2K Hayes ESP card support.
*[[FMD.SYS]] - Faxworks.
*[[GPIB.SYS]] - National Instruments Corp NI-488.2M.
*[[ICARICIO.SYS]] - IBM Realtime Interface Co-Processor OS/2 Support.
*[[IBMCOMO.SYS]] - Advanced System Mangement.
*[[LTMDMOS2.SYS]] - Lucent modem.
*[[PCCOM2.SYS]], [[PCCOM4.SYS]], [[PCCOM8.SYS]]
*[[PSCOM.SYS]]
*[[QCOM.SYS]] - Quatech PCI, ISA.
*[[QSP100.SYS]] - Quatech QSP-100 PCMCIA Quad RS-232 Serial Port driver.
*[[QSP200.SYS]] - Quatech QSP-200/300 Four Channel Asynchronous RS-422/485 PCMCIA Adapter driver.
*[[QVCOM.SYS]]
*[[SSCOMA1.SYS]]
*[[UART.SYS]] -  SIO2K service driver.
*[[XALL.SYS]] - DigiCHANNEL.


'''Platform Support:'''
==Input Devices==
{| class="wikitable" style="text-align:center" border="1"
===Gameport===
|-
*[[ASP4JOY.SYS]] - Vortex AU8820
!OS/2 2.x
*[[GAMEDD.SYS]]
!OS/2 3.0
*[[GAMEPORT.SYS]]
!OS/2 4.0
*[[GAMEPRT2.SYS]]
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|No
|Yes-FP13
|Yes
|Yes
|Yes
|}


=DEVICE=AFNB.SYS=
===Keyboard===
Basic-NetBIOS-Socket-Support Driver.
*[[PCKBD.SYS]] - Process Commander Keyboard
*[[KEYPAD.SYS]] - Screen Reader Keypad


  DEVICE=AFNB.SYS
===Pointer Devices===
;Mouse
*[[AMOUSE.SYS]] - Wheel mouse
*[[MOUSE.SYS]] - pointing device
*[[MOUSE2.SYS]] - ThinkPad TrackPoint
*[[MSPS201.SYS]] - Toshiba
*[[PMDD.SYS]]
*[[RODENT.SYS]] - Rodent
*[[XMOUSE.SYS]] - Enhanced mouse
*[[XSMOUSE.SYS]] - Mouse driver for touch
;Pen
*[[ACECAD.SYS]] - ACECAT III digitiser
*[[APPOINT.SYS]] - Kurta PenMouse
*[[ARTPAD.SYS]] - Wacom Artpad
*[[ARTZ.SYS]] - Wacom UD-0608
*[[DAUPHIN.SYS]] - Dauphin DTR-1 pen
*[[EIQ02.SYS]]
*[[EMI.SYS]] - Pen for OS/2 mouse emulation
*[[CONCERTO.SYS]] - Compaq Concerto Pen
*[[GLIFFIC.SYS]] - Gliffic Plus Mouse/Pen Set
*[[GRAPHIRE.SYS]] - Wacom Graphire
*[[GRID.SYS]] - GRiD Gauntlet
*[[IBM360P.SYS]] - ThinkPad 360P
*[[IBM710T.SYS]] - ThinkPad 710T
*[[IBM730T.SYS]] - ThinkPad 730T
*[[IBM750P.SYS]] - ThinkPad 750P
*[[PENCC.SYS]] - Calcomp Pen
*[[PENDD.SYS]] - Wacom IV/V
*[[SUMMA.SYS]] - Summa MM1201
;Touchscreen
*[[IBMTOU01.SYS]]
*[[IBMTOU02.SYS]]
*[[PDITOU01.SYS]]
*[[PDITOU02.SYS]]
*[[MONMOU01.SYS]]
*[[MONMOU02.SYS]]
*[[MONMOU03.SYS]]


'''Platform Support:'''
===Scanner & Camera===
{| class="wikitable" style="text-align:center" border="1"
*[[GENIUS.SYS]] - Genius Hand Scanner
|-
*[[QCAMM.SYS]] - Connectix Quickcam
!OS/2 2.x
*[[QUICKCAM.SYS]]
!OS/2 3.0
*[[SCANHP1.SYS]] - Danmar HP SCSI
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}


=DEVICE=AFOS2.SYS=
==Multimedia Devices==
Part of the TCP/IP Protocol Drivers
===Audio Adapter===
*[[AD1816DD.SYS]] - AD1816 SoundPort
*[[ADSHDD.SYS]] - Audio stream handler
*[[ALC.SYS]] - Realtek ALC AC97
*[[ASP4CORE.SYS]] - Vortex AU8820 Core
*[[ASP4OS2.SYS]] - Vortex AU8820 MMPM/2
*[[BUSAUDIO.SYS]] - Business Audio
*[[CCSINIT.SYS]] - ChipChat Sound Initializer
*[[CLICHOS2.SYS]] - Crystal Semiconductor CS4299 AC97
*[[CMPCI16.SYS]] - C-Media CMI8738
*[[CMPCI32.SYS]] - C-Media CMI8738
*[[CT5880.SYS]] - Creative Ensoniq 5880
*[[CS4231.SYS]] - Crystal 4231 chipset (IBM ThinkPad 750C)
*[[CWAUDIO.SYS]] - Crystal CS423x
*[[CWGUTIL.SYS]] - Crystal DSP manager
*[[CWMPU401.SYS]] - Crystal MPU401
*[[DTAUD.SYS]] - DTAudio driver
*[[ES1371.SYS]] - Ensoniq ES1371
*[[ES1488DD.SYS]] - ESS ES1488 audio chip
*[[ES1688DD.SYS]] - ESS ES1688
*[[ES198X.SYS]] - ESS Allegro Card (ES1989) and ESS PCI 198x (Maestro-3)
*[[ES688DD.SYS]] - ESS ES688 Audio
*[[GUSDD.SYS]] - Gravis Ultrasound (UltiMOD)
*[[GUSNDPD.SYS]]
*[[ICHCSND.SYS]] - Analog Devices SoundMax AD188x/198x
*[[INIT931.SYS]] - OPTi 82C931 Init
*[[JAZZDD.SYS]] - MediaVision Jazz-16
*[[MAD16.SYS]]
*[[MAESTRO2.SYS]] - ESS 198x PCI AudioDrive
*[[MPU401.SYS]] - MPU401 interface
*[[MPU401DD.SYS]] - MidiLab/2 Device Driver
*[[MVPRODD.SYS]] - ProAudio Spectrum
*[[OPL4D.SYS]] - OPL4
*[[PARADISE.SYS]] - Paradise mixer for Crystal CS423x
*[[SB16D2.SYS]] - SoundBlaster 16
*[[SBAWED2.SYS]] - SoundBlaster AWE32
*[[SBD2.SYS]] - SoundBlaster 2.0
*[[SBLIVE16.SYS]] - Soundblaster Live
*[[SBLIVE32.SYS]] - Soundblaster Live
*[[SBP2D2.SYS]] - Sound Blaster Pro (OPL3)
*[[SBPD2.SYS]] - Sound Blaster Pro (OPL2)
*[[SBPW2.SYS]] - SB PRO Wave-Only (aka K12)
*[[SBW2.SYS]] - Sound Blaster Wave-Only (aka K12)
*[[SNDSCAPE.SYS]] - Ensoniq Soundscape
*[[SPKRDD.SYS]] - PC speaker
*[[SOLO.SYS]] - ESS Solo1
*[[ULTRADD.SYS]] - Gravis UltraSound
*[[UNIAUD16.SYS]] - Uniaud
*[[UNIAUD32.SYS]] - Uniaud
*[[VIAUDD.SYS]] - VIA
*[[YMF724.SYS]] - Yamaha YMF724 (DS-1) PCI


  DEVICE=C:\Mptn\Potocol\Afos2.sys
===Radio FM===
*[[FMRADIO.SYS]] - PM Radio
*[[TURNON.SYS]]


'''Parameter:'''
===Video/TV Adapter===
* /V
*[[AF9015.SYS]] - EmperoarTV TV Tuner drivers.
Verbose, shows version-number
*[[BT32.SYS]] - Bt878 PCI TV adapter
*[[HIGHQ.SYS]]
*[[IVAC.SYS]]
*[[LXAPI32.SYS]] - common linux services driver
*[[NOVA.SYS]]
*[[T2.SYS]]
*[[WCAST.SYS]] - Hauppauge WinTV PCI


'''Platform Support:'''
==USB==
{| class="wikitable" style="text-align:center" border="1"
*[[GPH2USB.SYS]] - GPhoto/2
|-
*[[USBAUDIO.SYS]] - USB Audio
!OS/2 2.x
*[[USBCOM.SYS]] - USB communication
!OS/2 3.0
*[[USBDCF.SYS]] - USB GUDE Expert Mouse CLOCK
!OS/2 4.0
*[[USBECD.SYS]] - USB Enhanced Control
!OS/2 4.5x
*[[USBKBD.SYS]] - USB Keyboard
!eCS 1.x
*[[USBMOUSE.SYS]] - USB Mouse
!eCs 2.x
*[[USBPRT.SYS]] - USB Printer
|-
*[[USBRESMG.SYS]] - USB Resource Manager
|No
*[[USBSCAN.SYS]] - USB Scanner
|Yes
*[[USBQSER.SYS]] - USB serial
|Yes
*[[USBSER.SYS]] - USB serial
|Yes
*[[USBWCM.SYS]] - Wacom Tablets
|Yes
|Yes
|}


=DEVICE=AIRO340.SYS=
==Virtualisation==
Cisco Systems 340 Series Wireless Lan Adapter.
===MDOS VDD===
*[[ANSI.SYS]] - ANSI support
*[[VAPM.SYS]] - Advanced Power Management
*[[VASPI.SYS]] - ASPI
*[[VBIOS.SYS]] - BIOS
*[[VCDROM.SYS]] - CD-ROM drives
*[[VCMOS.SYS]] - CMOS
*[[VDMA.SYS]] - VDMA
*[[VDPMI.SYS]] - DOS Protected Mode Interface memory support
*[[VDPX.SYS]] - Provides DOS Protected Mode Interface memory support
*[[VEMM.SYS]] - EMS
*[[VMANWIN.SYS]]
*[[VNPX.SYS]]
*[[VPICPARM.SYS]] - PIC IRQ9
*[[VPRPMI.SYS]]
*[[VWIN.SYS]] - Windows
*[[VW32S.SYS]] -  Support for the Win32s APIs under Win-OS/2
*[[VXMS.SYS]] - XMS support
;Graphics
*[[V8514A.SYS]] - IBM 8514/A
*[[VCGA.SYS]] - Colour graphic adapter
*[[VEGA.SYS]] - EGA
*[[VMGAX64.SYS]] - Matrox
*[[VMONO.SYS]] - Monochrome display adapter
*[[VP9100.SYS]] - Weitek
*[[VP91VGA.SYS]]
*[[VSVGA.SYS]] - DOS SVGA support
*[[VVGA.SYS]] - VGA
*[[VXGA.SYS]] - XGA
;Audio
*[[ASP4VDD.SYS]] - Vortex AU8820
*[[AUDIOVDD.SYS]] - Audio device drivers
*[[VAUDDRV.SYS]] - Audio for ESS
*[[VGENAUD.SYS]] - Generic Win-OS/2 Audio
;LAN
*[[INT61VDD.SYS]] - PC/TCP sockets
*[[LANVDD.SYS]] - DOS LAN Manager
*[[VSHELL.SYS]] - Netware network shell
;Communications
*[[VHAPI.OS2]] - Virtual HLLAPI
*[[VMODEM.SYS]] - Ray Gwinn's Virtual Modem.
*[[VSIO.SYS]]
*[[VSIO2K.SYS]] - VCOM.SYS replacement
*[[VX00.SYS]] - Fossil
;Misc
*[[CPPVDD.SYS]] - CPU Monitor Plus
*[[GAMEVDD.SYS]] - Joystick port
*[[V2GB.SYS]] - 2GB limit for DOS installers
*[[VCADCMDR.SYS]]
*[[VCOMPAT.SYS]] - Compatibility patch
*[[VLFNMEM.SYS]]
*[[VMPU401.SYS]] - MPU401


  DEVICE=AIRO340.SYS
===Virtual PC===
*[[VMDRV.SYS]] - OS/2 guest additions
*[[VMMOUSE.SYS]] - pointer device integration
*[[VMVDD.SYS]]
*[[VPCAPP.SYS]] - host


'''Platform Support:'''
===VirtualBox===
{| class="wikitable" style="text-align:center" border="1"
*[[VBOXGUEST.SYS]] - guest support
|-
*[[VBOXMOUSE.SYS]] - pointer device integration
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}


==Others==
*[[CALL_EXE.SYS]] - run executable program
*[[CRYP2X.SYS]] - ERACOM PCVault
*[[DCF77.SYS]] - DCF77 radio control clock
*[[DELAY.SYS]]
*[[DTA.SYS]]
*[[ELSA.SYS]]
*[[EXCPHEAD.SYS]]
*[[GWDTA.SYS]]
*[[HRTIMER.SYS]] - high resolution timer
*[[IAS_DD.OS2]] - IrDA IAS
*[[IBMCSFLK.SYS]]
*[[IBMLANLK.SYS]]
*[[IRDA_DD.OS2]]
*[[IRDA_PHY.OS2]]
*[[KILLER.SYS]] - WatchCat
*[[LDCOPY.SYS]]
*[[LOCATECD.SYS]]
*[[LPT49.SYS]]
*[[OS20MEMU.SYS]]
*[[PANEL.SYS]]
*[[PAUSE.SYS]]
*[[SDDHELP.SYS]] - Scitech helper
*[[SESDD32.SYS]] - Security
*[[SWD1.SYS]] - Super WatchDog
*[[SYSINFO.SYS]]
*[[SYSIOS2.SYS]] - System information
*[[THESEUS2.SYS]]
*[[UPSMON.SYS]]
*[[USLGENIO.SYS]]
*[[WARPDRVR.SYS]]
*[[WATCHCAT.SYS]] - WatchCat
*[[WATCHCRD.SYS]] - WatchCard
*[[WCPCI.SYS]] - WatchCard PCI
*[[WIN32K.SYS]] - Odin Ring-0


=DEVICE=ALC.SYS=
==See also==
ALC* AC97 Audio Codec OS/2 Device Driver.
*[[CONFIG.SYS - DEVICE Statements - ISDN Support]]
http://www.realtek.com.tw/htm/download/driver.asp
*[[CONFIG.SYS - DEVICE Statements - Software Products]]


  DEVICE=ALC.SYS
[[Category:The Config.sys Documentation Project]]
 
'''Parameter:'''
 
* I5
The 'I' means interrupt, the available interrupts are 5, 7, 9, 10, 11, 12 and 15
 
* N:ALC1$
Physical Device Driver name
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=AMOUSE.SYS=
Mouse Driver for Wheel Mices. like e.g. the:
* Logitech Pilot Mouse+
* Logitech Mouse Man+
* Logitech Optical Wheel Mouse
* Microsoft Intellimouse
* IBM Scrollpoint Mouse
* Typhoon 40159
* Trust 250S
 
  DEVICE=AMOUSE.SYS
 
'''NOTE:''' With Amouse installed XFree86 refuses to work
Available for FREE at http://home.t-online.de/home/klaus.breining/
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=ANSI.sys=
This driver installs the ANSI support for DOS windows.
 
  DEVICE=C:\OS2\MDOS\ANSI.SYS <parameters>
 
Parameters:
* /X
Enables the redefinition of keys.
 
* /K
Prevents the use of extended keyboards. Extended keyboards work as standard keyboards.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
 
 
 
=DEVICE=APM.SYS=
Advanced Power Management (APM) device driver. Provides support for your APM BIOS on your motherboard.
 
  DEVICE=C:\Os2\Boot\Apm.sys parameter
 
'''Parameter:'''
 
* /B
favorizes the direct connection to the APM-BIOS support
* /D
favorizes the device-driver connection of the APM support
* /V
x.y forces the compatibility to APM Version x.y (e.g. 1.0)
 
Together with the APMDAEMN.SYS these settings can also be done by using the Power-Symbol in your System Setup Folder.
 
'''TIP:''' To work correctly you have 1. to change your Warp-Center properties to 'Show only when Mouse is over Center's position' and 2. enable in 'Power Properties' in your System folder on the 'Performance' page 'Automaticall change performance when the power source changes'. (Only tested with Warp4 fixpak 13).
 
'''TIP:''' When OS/2 fails to install in ACPI only Systems REM this driver (has to be done on the Installationdisks too) or give APM_NH.SYS a try, it is rported to work on Intel based Motherborads too.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE APM_NH.SYS=
Replacement APM driver (APM_NH.SYS)
APM_NH.SYS is based on 10.037 level of IBM's APM.SYS (same as XR_D002 but probably outdated with respect to OS/2 v 4.52 G.A.). Its purpose is to honor the APM hooks installed by VIAAPM.SYS while allowing usual APM tasks such as power-down or suspend mode. It is therefore essential that one installs APM_NH.SYS rather than APM.SYS, so the KT266A idle hook would not be taken out by IBM's driver.
 
  DEVICE APM_NH.SYS
 
'''Tip:''' In System which only have ACPI it is reported that APM-NH.SYS works even it is a Intel chipset.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=APPOINT.SYS=
Pen for OS/2 Device Driver for Kurta PenMouse/APT Gliffic Plus.
  DEVICE=APPOINT.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ARLTNDIS.OS2=
ARtem Onair ComCard.
The ComCard is a IEEE 802.11 compliant wireless LAN network card. For more Information see http://www.artem.de
 
  DEVICE=ARLTNDIS.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ARTPAD.SYS=
Device Driver for Wacom Artpad used with Pen for OS/2
  DEVICE=ARTPAD.SYS
IRQ=4 COMPORT=1 ADRESS=3F8 is used for Com1
IRQ=3 COMPORT=2 ADRESS=2F8 is used for Com2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ARTZ.SYS=
Pen for OS/2 Device Driver for Wacom UD-0608.
  DEVICE=ARTZ.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASNPCI.OS2=
AsanteFast 10/100 PCI Ethernet driver.
 
  DEVICE=ASNPCI.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASP4CORE.SYS=
Vortex AU8820 Core OS/2 driver.
 
  DEVICE=ASP4CORE.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASP4JOY.SYS=
Vortex AU8820 OS/2 Joystick driver.
 
  DEVICE=ASP4JOY.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASP4OS2.SYS=
Vortex AU8820 OS/2 MMPM/2 driver.
 
  DEVICE=ASP4OS2.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASPIDRV.SYS=
ASPI Driver supplied by Solution Technology Inc.
 
  DEVICE=ASPIDRV.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASPIPFA.SYS=
Device driver used to distinguish between IDE drives and SCSI drives when using Hard Disk Drive Monitor.
 
The Hard Disk Drive Monitor monitors the status of SMART-compatible harddisk drives in your computer.
available as ftp://ftp.pc.ibm.com/pub/pccbbs/commercial_desktop/zp1t06a.exe
 
  DEVICE=ASPIPFA.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASPIROUT.SYS=
The interface of ASPI Router merely is an extension of the interface of OS2-ASPI.DMD
needed e.g. by the FREE CDRECORD/2 by [[Chris Wohlgemuth]] available at: http://www.geocities.com/SiliconValley/Sector/5785/ and by the FREE SANE (Scanner Access Now Easy) By [[Yuri Dario]] available at http://www.geocities.com/SiliconValley/Peaks/4320.
 
  DEVICE=ASPIROUT.SYS
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ASPITAPE.SYS=
GTAK Driver for SCSI tape access by GTAR scsitape.dmd and scsitape.sys also belong to the package
By [[Andreas Kaiser]] Andreas.Kaiser@stuttgart.netsurf.de, gtak258.zip gtar258.zip.
 
  DEVICE=ASPITAPE.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ATALK.SYS=
Appletalk driver from Lanserver for Macintosh
 
  DEVICE=ATALK.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ATI0.sys=
Used by ATI 3D Rage graphic cards.
 
  DEVICE=C:\OS2\ATI0.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=ATIM64.SYS=
Used by ATI 3D Rage grafic cards.
 
  DEVICE=C:\OS2\ATIM64.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=ATKP.SYS=
Appletalk PAP Port driver from Lanserver for Macintosh.
 
  DEVICE=ATKP.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=AVMB1.SYS=
Driver for the AVM Active ISDN-Controller B1.
 
  DEVICE=AVMB1.SYS
 
'''Parameter:'''
* /$
If old programs needs the old naming convention (like an outdated CFOS).
 
'''NOTE:''' The passive AVM-Cards (like the Fritzcard) aren't supported by AVM with OS/2 Drivers.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=AUDIOVDD.SYS=
This is the standard VDD for audio device drivers that prevents DOS sessions from accessing the audio hardware when an OS/2 session is using it and vice versa. The driver comes with OS/2 and is used by a lot of diferent soundcards.
 
  DEVICE=C:\MMOS2\AUDIOVDD.SYS
 
'''Parameter:'''
 
* PAS161$ for the MediaVision's ProAudio Spectrum Soundcard
* SBAUD1$ for the Sound Blaster 16 sound card
 
'''NOTE:''' the parameter is the link between the OS2 driver and the DOS driver. The DOS driver inherits it's settings associated with the parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=B57.OS2=
Broadcom Corporation 10/100/1000 NetXtreme Ethernet DOS/OS2 NDIS2 driver.
 
  DEVICE=B57.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=BIPMAC.OS2=
This is a driver for the IBM Active 2000 ISDN card.
 
  DEVICE=C:\IBMbip\OS2\BIPMAC.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=BIPPDD.OS2=
This is a driver for the IBM Active 2000 ISDN card.
 
  DEVICE=C:\IBMbip\OS2\BIPPDD.OS2 <parameter>
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=BIXANDIS.OS2=
BinTec XAIR WLan PC Card
http://www.bintec.de/de/index.php?r=prod/XAir&m=navbar.html&c=XAirpc.html
 
  DEVICE=BIXANDIS.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=BT32.SYS=
Radio/TV driver for BT878 based Cards
 
  DEVICE=BT32.SYS
 
'''Parameters:'''
* /V
Verbose: Show Copyright information
 
* /VM
Verbose modules: Like /V plus module list
* /3
Execute an INT3 at initialisation (Use kernel debugger!)
* /NOMODULE
Don't load modules at system startup (Use BT32CFG.EXE to load/unload)
* /NOCOREMODULE
Don't load core modules at system startup (Use BT32CFG.EXE to load/unload)
* /MODPARM:
Support Linux insmod parameters for various modules
* /LOADMODULE:
Load module (only with parameter /NOCOREMODULE)
* /NOIRQ
Disable IRQ for BTTV. This is for test purposes only when the driver traps at startup
 
'''NOTE:''' BT32.SYS must reside after LXAPI32.SYS.
 
'''NOTE:''' BT32.SYS contains the following modules:
* bttv
* tvaudio
* tuner
* msp3400
* tda7432
* tda9875
 
'''NOTE:'''
'''Module parameters:'''
BT32.SYS contains a lot of module parameters. See documentation in the DOC directory of the package.
Most important paramers are:
* bttv card=n Specify a specific BTTV card.
* tuner=n Specify a specific BTTV tuner.
Valid numbers for n for both parameters are listed in DOC\CARDLIST
 
See DOC\Insmod-options for all other parameters.
 
'''NOTE:''' If you are using wcast.sys also there may be problems to use the bttv driver after an application has used wcast.sys. (Attention: Multimedia Setup also opens wcast.sys!!!) Known results are: No picture, No sound or both.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=BTSSCSI.SYS=
Driver for Back Again/2 SCSI tape support.
 
  DEVICE=BTSSCSI.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=BUNDLE.SYS=
Module for Teles ISDN Cards.
 
  DEVICE=BUNDLE.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=BUSAUDIO.SYS=
C-Media CMI 8330 Soundcard driver (AD 8329 Chip).
 
  DEVICE=BUSAUDIO.SYS
 
'''Parameters:'''
* /D:n
DMA channel, n=0,1 or 3
* /I:n
Interrupt, n=5,7,9,10,11 or 12
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CAPI.DLL=
CAPI-DLL v.1.1 16-bit for ISDN Cards.
 
  DEVICE=CAPI.DLL
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CAPI20.DLL=
CAPI-DLL v.2.0 32-bit for ISDN Cards.
 
  DEVICE=CAPI20.DLL
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CAPI20.OS2=
Eicon Diehl COMMON-ISDN-API Version 2.0.
 
  DEVICE=CAPI20.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CBENDIS.OS2=
Xircom CardBus Ethernet 10/100 Adapter
 
  DEVICE=CBENDIS.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CBEODI.OS2=
Xircom CardBus Ethernet 10/100 Adapter OS/2 Netware ODI driver.
 
  DEVICE=CBEODI.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CBEODI.OS2=
Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for 1TR6(German) protocol.
 
  DEVICE=CBEODI.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CCAXE.SYS=
Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol.
 
  DEVICE=CCAXE.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CCSINIT.SYS=
ChipChat Sound Initializer
only needed with warp 4
 
  DEVICE=CCSINIT.SYS
 
The ChipChat is one of the rare available Soundcards for the microchannel, it is based on the ESS1688. For more information see: http://www.ChipChat.com
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CD1400.SYS=
RISC COM CD1400 Device driver by DECISION-COMPUTER INTERNATIONAL Co.,LTD
 
  DEVICE=CD1400.SYS
 
'''Parameter:'''
* /Mxxxx
card memory address
 
* /Ixx
IRQ Nø
 
* /Cxx
Assign the port number of the first port on the card ( COM1 to COM96 )
 
'''NOTE:''' The driver will autodetect the number of communication ports on the card ( 4 or 8 ports ).
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CDBASPI.SYS=
CD-TEK driver to access easily the PIONEER DRM-1804X autochange CD-ROM device.
  DEVICE=CDBASPI.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CDMF.SYS=
Used by the Firewall built into TCP/IP 4.1 and above. This is IBM's Commerical Data Masking Facility encryption driver. This driver is an early version of the IBM proposed new national standard encryption protocol (US) with a variable key of up to 128-bits. It supports the VPN (Virtual Private Network) built-in to the firewall of TCPIP 4.1 and later. This driver uses a larger data block than DES and is faster than competing protocol drivers. It is a enhanced version of
DES. Many to don't consider it as strong an algorithm as Blowfish or Ideal, widely available competitors to this protocol.
 
  DEVICE=C:\Mptn\Potocol\Cdmf.sys
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=CDMGRDRV.SYS=
Driver of the FREE CD-Rom Manager for Plextor SCSI CD-ROM drives. Developed by [[Markus Mueller|Markus]] and [[Christian Mueller]].
 
  DEVICE=CDMGRDRV.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CDROMMGR.DMD=
CD-ROM device manager which prevents subsequent requests to different slots of a CD changer.
  DEVICE=CDROMMGR.DMD
'''NOTE:''' OS2CDROM.DMD must be disabled to work.
 
'''Parameter:'''
 
* /T:n
CDROMMGR.DMD has the changer feature enabled by default. It prevents slot changes for 1000ms by returning ERROR_DEVICE_NOT_READY to the caller. The timeout value can be set at load time through option /T: The
valid range is from 1 second up to 60 seconds. If CDROMMGR.DMD does not find a CD Changer device, the feature will automatically be disabled and cannot be activated.
 
* /C
CDROMMGR.DMD will manage only CD Changers. Normal CD-ROM drives or CD Burners will not get allocated. This option is
useful if you want to use another CD-ROM device manager for special features, like CTCDROM.DMD for Unite CD-Maker. To make sure that CDROMMGR.DMD gets control over the CD Changer devices, it has to be loaded as the first CD-ROM manager.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CE3NDIS.OS2=
Xircom Ethernet Adapter 10/100
NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
 
  DEVICE=CE3NDIS.OS2
 
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CFMASPI.SYS=
Driver for the TWAIN Scanner Module by CFM (Computer for Mankind)
 
  DEVICE=CFMASPI.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CFOS.SYS=
CFOS is a driver that sits between your ISDN hardware and your Modem Software ( Internet Dialer, Terminal program). It emulates a COM port. 'cFos' device driver receives the usual modem commands, the so-called AT commands from the communication programs and turns them into the corresponding ISDN CAPI commands. ISDN CAPI responses are turned into modem responses of the same meaning, so that the communication programs 'understand' them.
 
  DEVICE=C:\Cfos\Cfos.Sys <parameters>
 
As you can enter any equipment names (e.g.: ISDN1) or several COM ports (a maximum of two in the shareware version, up to 30 in 'cFos Professional'). Be careful not to enter COM ports that actually exist as hardware and are in use (e.g. a COM port for your mouse).
 
'''NOTE:''' The CFOS.SYS driver should be loaded after drivers for serial interfaces (COM.SYS oder SIO.SYS) and after the CAPI driver.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=CFOS20.SYS=
CAPI 2.0 CFOS device driver, for more details see DEVICE CFOS.SYS.
  DEVICE=CFOS20.SYS
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CLEANUP.SYS=
This is a simple device driver that DELETES the specified file. Wild cards are NOT supported. To delete multiple files, add multiple times to config.sys.
Part of the Graham Utilities 2.X available at http://www.warpspeed.com.au/graham.htm
 
  DEVICE=CLEANUP.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CLICHOS2.SYS=
Crystal Semiconductor CS4299 AC97 Audio Driver (to be found e.g. on IBM T23 Thinkpad)
This chip doesn't support Midi, you need Timidity to geht Midi working.
 
  DEVICE=CLICHOS2.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CMPCI16.SYS=
C-Media CMI8738 OS/2 Audio Driver ported from Linux sources, based on the SBLive project.
  DEVICE=CMPCI16.SYS
'''Parameter:'''
* /V
verbose (prints copyrights during driver init)
* /C
enable CD audio input
* /M
enable microphone audio input
* /L
enable linein audio input
* /A
enable auxin audioinput (since ver. 0.13)
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CMPCI32.SYS=
C-Media CMI8738 OS/2 Audio Driver
  DEVICE=CMPCI32.SYS
 
'''Parameter:'''
 
* /V:
verbose (prints copyrights during driver init)
* /D:
print start and end address of code (useful to locate the code that causes a trap (CS:EIP in trapscreen))
* /R:
use linein jack to output rear channels
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=COM.SYS=
These driver is required for serial communication.
 
  DEVICE=C:\OS2\Boot\COM.SYS <parameters>
 
'''TIP:''' below. This line MUST appear after any driver that uses a communications port. Older versions of COM.SYS are limited to 57600 Baud, newer ones (e.g. delivered with Warp 4) are able to do 115200 Baud. Beginning with build 10.042 PCI Add-On cards with implemented software interrupt sharing are supported too, beginning with build 10.052 there are 16 com ports available and beginning with build 10.068 Combo Cards are supported.
 
'''TIP:''' There are two very good replacement drivers called SIO.SYS\VSIO.SYS.
 
'''TIP:''' To add support for COM3 and COM4 at location 3E8 with IRQ 4 and 2E8 with IRQ 3 respectively, add (3,3E8,4) (4,2E8,3) to the DEVICE line, e.g.
  DEVICE=drive:\OS2\COM.SYS (3,3E8,4) (4,2E8,3)
You can also use this method to change a COM ports assigned IRQ. The normal address for COM1 is 3F8 and IRQ 4, for COM2 2F8 and IRQ3.
 
'''TIP:''' With ThinkPads should the address be added. e.g:
  DEVICE=drive:\OS2\BOOT\COM.SYS (1,3F8,4) (2,2F8,3)
 
'''Parameter:'''
 
* /V
Verbose (since 10.052)
* /W
Wait verbose mode (since 10.052). Displaying pauses with a "Press Enter to continue..." message.
* /F
Find COM ports on PCI combo (serial/parallel) cards automatically (since 10.068).
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=COM02.SYS=
For IBM PS/2 model 90 & 95 only.
Lets you use the communications ports COM1 and COM2. See DEVICE COM.SYS.
  DEVICE=COM02.SYS
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
=DEVICE=CONCERTO.SYS=
Pen for OS/2 Device Driver for Compaq Concerto.
  DEVICE=CONCERTO.SYS
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
=DEVICE=CPASPI.SYS=
Driver for scanner access by Impos/2.
  DEVICE=CPASPI.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CPPOPA3.SYS=
High-resolution-timer manipulating sampling device driver from IBM?s Visual Age C/C++ (and COBOL) compilers (used by the Profiling tool/Performance Analyzer (ICSPERF)).
  DEVICE=CPPOPA3.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CPPPAN40.SYS=
Device driver for Visual Age for C++ 4.0 performance analysis.
  DEVICE=CPPPAN40.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CPQNF3.SYS=
OS/2 ODI Driver for Compaq NETFLEX-3/NETELLIGENT Controllers.
  DEVICE=CPQNF3.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CPUMONP.SYS=
CPU Monitor Plus, from Bon Ami Software.
  DEVICE=CPUMONP.SYS
'''TIP:''' By [[Daryl Sperber]]: CPUMONP was last updated in 1996 (for FP17 of Warp connect) and has worked just fine for Warp 3 and Warp 4 all this time. However it obviously now has a fatal incompatibility with FP14 of Warp 4 that is causing the Trap 000e for me.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CT5880.SYS=
Creative Lab Ensoniq CT5880 PCI Audio Device Driver.
  DEVICE=CT5880.SYS
'''NOTE:''' No MIDI support, no WIN/OS2 support.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CTCDROM.DMD=
Driver for Unite CD-Maker.
  DEVICE=CTCDROM.DMD
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CWAUDIO.SYS=
Sound Drivers for the Crystal CS4231, 4232 (A, B), 4235, 4236 (B, D, E), 4237B, 4238B, 4239.
 
  DEVICE=CWAUDIO.SYS
 
'''NOTE:''' for 4231, 4232 and 4236 use 'Mode2' driver version (latest 1.7)
 
'''TIP:''' If you have problems with the Yamaha OPL3-SAx chipset: According to a user, instead of using the Yamaha OPL-3 SAx drivers for the same audio chipset, using the driver for Crystal CS4232 works fine without any limitations.
 
A FREE mixer for the crystal cards is LBCSMix V.1.0 from http://freebyte.ml.org/~boga/OS2Programs.html
 
'''Parameter for 'mode3' drivers:'''
* /N:
Name of PDD BSAUD1$ (Supplied by install)
* /V
Verbose Display
* /X1:
AUX1 unmute/gain 0..100 (decimal) (*50) (usually "Line-In")
* /X2:
AUX2 unmute/gain 0..100 (decimal) (*50) (usually CD-ROM)
* /L:
LINE unmute/gain 0..100 (decimal) (*100)(FM volume)
* /LCAPT:
Line-In record source X1, X2, *X1X2, L (X1X2 is mixed aux1+aux2)
* /T:
Inactivity power down 1..5 minutes (*1)
* /MBY:<0,1>
Mono bypass *1 (mono-in connected to mono-out)
* /MIM:<0,1>
Mono input mute *1 (mono-in not connected to input mixer)
* /MOM:<0,1>
Mono out mute *0 (audible)
* /XCTRL0:<0,1>
XCTRL0 Pin set System specific. Sometimes used to
* /XCTRL1:<0,1>
XCTRL1 Pin set control power to amplifier. On IBM
Aptiva with Bose speakers, set both to 1
* /P:
Codec Port *534, 608, (530..FF8, divisible by 4)
* /I:
Codec IRQ *5, 7, 9, 11, 15 (decimal)
* /D:
Codec DMA 0, 1, 3 (Default 1,0)
* /C:
Control Port 120, *538, (120..FF8, divisible by 8)
* /J:
Joystick Port *200, 208, NONE
* /S:
Sound Blaster Port *220, 240, 260, 280, NONE
* /M:
MPU Port and IRQ *330, NONE, (300..3E0, divisible by 8)
IRQ: 7, 9, 11, 12, 15, *NONE
* /F:
FM synth port *388, NONE, (388..3F8, divisible by 8)
* /IRQRate:dd
Target interrupt rate *32 Range: 1..64 interrupts per second
* /DMASize:nnnn
DMA Buf size maximum *8192 Range: 256..16384 (2 IRQs/Buffer)
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=CWGUTIL.SYS=
Crystal DSP manager utility device driver.
  DEVICE=CWGUTIL.SYS
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
=DEVICE=CWMPU401.SYS=
Crystal MPU401 driver for a complete discription see MPU401.SYS.
 
  DEVICE=CWMPU401.SYS
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
=DEVICE=DC21X4.OS2=
Digital Semicon. DC21X4-based Ethernet Adapter Network driver.
 
  DEVICE=DC21X4.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Dcf2cde.sys=
This driver is used by the DCF/2 disk compression program.
 
  DEVICE=C:\Dcf2\Dcf2cde.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Dcf2pdd.sys=
This driver is used by the DCF/2 disk compression program.
 
  DEVICE=C:\Dcf2\Dcf2pdd.sys parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Dcf2mgr.sys=
This driver is used by the DCF/2 disk compression program.
 
  DEVICE=C:\Dcf2\Dcf2mgr.sys parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=DCF77.SYS=
Driver for DCF77-Radiocontrol Watch.
Available for FREE at http://www.prog-link.com
 
  DEVICE=DCF77.SYS
 
'''Parameter:'''
* /P:Port
Port, 201 (Gameport), 379 (LPT1),
279 (LPT2), 3BD (LPT3), 3F8 (COM1), 2F8 (COM2), 3E8 (COM3), 2E8 (COM4)
* /IRQ=nn (or /I:nn)
Interrupt, 3, 4, 5, 7, 9, 10, 11, 12, 15 or NONE. With
NONE Polling-Mode is used
* /V
Verbose
* /Q
Quiet, disables displaying informations during start
 
'''NOTE:''' For a complete list of parameters see the documentation deliverd with the driver.
 
=DEVICE=DDE4EXTRA.SYS=
Is used by the IBM CSET C/C++ Compiler.
 
  DEVICE=C:\User\Cset21\DDE4EXTRA.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=DE528.OS2=
D-Link 528CT Ethernet Adapter Network driver
 
'''NOTE:''' It is impossible with this driver to execute graphical apps using Exceed
 
DEVICE DELAY.SYS
[Table of contents] [Index] [DEVICES]
 
Device driver for providing a timed delay during system startup
 
avaliable for FREE at http://www.tavi.co.uk/os2pages/delay.html
 
 
Parameter:
 
/K /k, -K and -k are equivalent. exits the delay period immediately by pressing any key (apart shift, ctrl, alt etc.)
mm:ss is the intended delay in minutes and seconds.
message is an optional message that will appear during the delay period.
 
DEVICE DES.SYS
[Table of contents] [Index] [DEVICES]
 
This is the current national standard encryption protocol (US) used in triple DES encryption with 128-bit key. It is currently being replaced by a new, but yet not chosen protocol. Use to encrypt user data by the VPN service.
 
DEVICE DFE650.OS2
[Table of contents] [Index] [DEVICES]
 
D-Link DFE-650 Fast Ethernet PC Card
 
NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
 
DEVICE DIAPIS.OS2
[Table of contents] [Index] [DEVICES]
 
Eicon Diehl COMMON-ISDN-API Version 1.1
 
DEVICE DIDD.OS2
[Table of contents] [Index] [DEVICES]
 
This device driver stores the configuration information of every installed Eicon.Diehl ISDN-Adapter using the DI(Direct)-Interface and has to be installed before any ISDNSDI.OS2 or ISDNPDI.OS2 drivers.
 
DEVICE DIMAINT.OS2
[Table of contents] [Index] [DEVICES]
 
This device driver is a trace interface for all installed Eicon Diel ISDN adapters and is used by the DILOG.EXE application. The content of a DILOG trace depends on the driver which writes information into the DIMAINT buffer. DIMAINT uses no parameter.
 
DEVICE DISKFIT.SYS
[Table of contents] [Index] [DEVICES]
 
Driver for the fault tolerance system
 
See OS/2 manual for more information
 
DEVICE DIVAPP.OS2
[Table of contents] [Index] [DEVICES]
 
This utility represents the Plug and Play (PnP) enabler for the Eicon Diehl ISAPlug and Play ISDN adapters.
 
Parameter:
 
-a I/O address for adapter
-i Interrupt number to use
-q Quiet mode
-v Verbose mode, print detailed information onto screen
 
DEVICE DLKFET.OS2
[Table of contents] [Index] [DEVICES]
 
D-Link DFE-530TX PCI Fast Ethernet Adapter
 
DEVICE DLKPCI.OS2
[Table of contents] [Index] [DEVICES]
 
D-Link PCI Fast Ethernet Adapter
 
NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/dec.zip.
 
DEVICE DLKRTS.OS2
[Table of contents] [Index] [DEVICES]
 
D-Link DFE-530TX+ 10/100 Ethernet NIC
 
DEVICE DM9PCI.OS2
[Table of contents] [Index] [DEVICES]
 
DAVICOM DM9 PCI Series Fast Ethernet Adapter (e.g., on the SiS530 motherboard)
 
www.davicom.com.tw
 
=DEVICE=Dos.sys=
Is needed if you want to run DOS or Windows applications.
 
  DEVICE=C:\OS2\Boot\Dos.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
= DEVICE=DP820A.SYS=
[Table of contents] [Index] [DEVICES]
 
National Semiconductor DP83820 Another NDIS 2.0.1 MAC driver
 
DEVICE DP83815.OS2
[Table of contents] [Index] [DEVICES]
 
National Semiconductor DP83815 10/100 MacPhyter3v PCI Adapter
 
DEVICE DP83820.OS2
[Table of contents] [Index] [DEVICES]
 
National Semiconductor DP83820 Gig Mac NDIS 2.0.1 OS/2 driver
 
DEVICE DRVOCDB.SYS
[Table of contents] [Index] [DEVICES]
 
Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0
 
DEVICE DRVOPPQT.SYS
[Table of contents] [Index] [DEVICES]
 
Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0
 
DEVICE DRVOQ117.SYS
[Table of contents] [Index] [DEVICES]
 
Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0
 
DEVICE DSS1C20X.SYS
[Table of contents] [Index] [DEVICES]
 
CAPI version 2.0 driver for ELSA ISDN board
 
D channel protocol : DSS1 (EURO-ISDN)
B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
 
Parameter:
 
/a IO-Port, e.g. /a160
 
/r IRQ, e.g. /r11
 
DEVICE DSS1CAPX.SYS
[Table of contents] [Index] [DEVICES]
 
CAPI version 1.1 driver for ELSA ISDN board
 
D channel protocol : DSS1 (EURO-ISDN)
B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
 
Parameter:
 
/a IO-Port, e.g. /a160
 
/r IRQ, e.g. /r11
 
/N0=MSN0 - /N9=MSN9 Allocation of MSNs
 
DEVICE DSS1TE.SYS
[Table of contents] [Index] [DEVICES]
 
Euro ISDN Module for Teles ISDN Cards
 
<<=TIP=>> If you not already have one better get one from ELSA. Newer Teles Cards are reported to produce many problems (if not fail in general) and there is definetly no further OS/2 development. Also newer Driver Versions (> 2.97) are reported to make trouble.
 
DEVICE DTA.SYS
[Table of contents] [Index] [DEVICES]
 
Data Transport Agent (DTA) Driver for eComStation.
 
It is meant to improve the ability to handle datastreams in eCS, DOS and Win-OS/2 sessions. In addition it will enable virtual DOS sessions to play sound via a generic sounddriver, effectively bypassing the need for soundcard specific DOS drivers.
 
DEVICE E1000.OS2
[Table of contents] [Index] [DEVICES]
 
Intel(R) 8254X Based Network Connection Gigabit Ethernet driver
 
DEVICE E100B.OS2
[Table of contents] [Index] [DEVICES]
 
Intel EtherExpress PRO Adapter, Intel InBussines Ethernet Adapter
 
DEVICE E10P.OS2
[Table of contents] [Index] [DEVICES]
 
Intel EtherExpress(TM) PRO/10 PCI LAN Adapter
 
DEVICE E21ND.OS2
[Table of contents] [Index] [DEVICES]
 
Cabletron E21 Ethernet Adapter
 
DEVICE E22ND.OS2
[Table of contents] [Index] [DEVICES]
 
Cabletron E22 Ethernet Adapter (SNMP)
 
DEVICE EC2T.OS2
[Table of contents] [Index] [DEVICES]
 
Linksys Combo PCMCIA EthernetCard (EC2T)
 
NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
 
 
=DEVICE=EcrDrv.sys=
Provides support for Remote Support for OS/2. Remote Support can be found in the BonusPak and allows IBM Support Centers to log onto your OS/2 Warp 4 workstation.
 
  DEVICE=C:\Bonuspak\RS231B\Ecrdrv.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=EISANDIS.OS2=
Racore EISA Token-Ring Adapter
 
DEVICE EL59X.OS2
[Table of contents] [Index] [DEVICES]
 
3Com Fast EtherLink & EtherLink III Bus Master Family Network driver
 
DEVICE EL90X.OS2
[Table of contents] [Index] [DEVICES]
 
3Com Fast EtherLink/EtherLink XL Family Network driver (e.g. 900 A/B)
 
DEVICE ELNK3.OS2
[Table of contents] [Index] [DEVICES]
 
3Com Etherlink III Adapter
 
DEVICE ELPC3.OS2
[Table of contents] [Index] [DEVICES]
 
3Com 3C589 EtherLink III PC Card OS/2 driver
 
<<=TIP=>> The driver traps on system with more than 500MHz clock rates. To solve the problem get 3c589patch.zip to patch the driver. It includes also a ptach to get the 3net_log utility to work with the drivers V. 1.8.
 
DEVICE ELPC3X.OS2
[Table of contents] [Index] [DEVICES]
 
3Com EtherLink III LAN+Modem PC Card fr OS2 V1.5 - Card Services driver
 
<<=TIP=>> If you own a 3COM 3C562D this adding setting to your config.sys may get your card working:
BASEDEV=RESERVE.SYS /MEM:CB00,1000
 
DEVICE ELSA.SYS
[Table of contents] [Index] [DEVICES]
 
Card specific part of GRADD display driver and settings for ELSA WINNER 2000/Office
 
DEVICE EMI.SYS
[Table of contents] [Index] [DEVICES]
 
Pen for OS/2 Mouse Emulation driver
 
DEVICE EN5251.OS2
[Table of contents] [Index] [DEVICES]
 
Accton EN5251 Based Fast Ethernet Adapter
 
DEVICE ENDS2ISA.OS2
[Table of contents] [Index] [DEVICES]
 
Crystal LAN(tm) CS8900/CS8920 Ethernet Adapter
 
DEVICE EP325.OS2
[Table of contents] [Index] [DEVICES]
 
OS/2 NDIS SURECOM EP-325 PCI Ethernet Adapter (based on Realtek RTL8029)
 
DEVICE EP427.OS2
[Table of contents] [Index] [DEVICES]
 
SureCom EtherPerfect-427 PCMCIA Ethernet Card
 
DEVICE EQNKRCSH.EXE
[Table of contents] [Index] [DEVICES]
 
Driver by Netfinity* Version 5.20.3
 
DEVICE EQNKVKBD.SYS
[Table of contents] [Index] [DEVICES]
 
Driver by Netfinity* Version 5.20.3
 
DEVICE EQNRCSH.EXE
[Table of contents] [Index] [DEVICES]
 
Part of DCAF (Distributed Console Access Facility)
 
<<=ATTENTION=>> If you don't have the IBM Internal Y2K fix it won't work after 31.12.1999
 
DEVICE EQNVKBD.SYS
[Table of contents] [Index] [DEVICES]
 
Part of DCAF (Distributed Console Access Facility)
 
<<=ATTENTION=>> See also DEVICE EQNRCSH.EXE
 
DEVICE ES1371.SYS
[Table of contents] [Index] [DEVICES]
 
PCI Ensoniq ES1371 Audio Device Driver
No WinOS and Midi support.
 
<<=Note=>> Some users report that the Soundblaster PCI 128 works with this driver. According to the Linux ALSA Project (open-source sound drivers) the ES1371 is built into the PCI 64 and PCI 128. But to complicate things there could also ES1370 chips on the boards
 
There are enhanced drivers (From os2 DDK pciaudio driver sources) with support for ct5880(a,c,d), ev1938(a) based cards developed as a part of Russian Team OS/2 ( OS2.Ru ) projects.
 
See: http://OS2.Ru/index.phtml.en
 
DEVICE ES1688DD.SYS
[Table of contents] [Index] [DEVICES]
 
Sounddriver for the ESS1688
 
A FREE mixer for this Soundchip is ESSMIX13.ZIP by Oleg Deribas (older@iname.com).
 
DEVICE ES1868DD.SYS
[Table of contents] [Index] [DEVICES]
 
Sounddriver for the ESS1868pnp (many soundcards)
 
A FREE Mixer for this soundcard is MINIMIX2.ZIP by Marco G. Salvagno (mgs@whiz.cjb.net) http://whiz.cjb.net.
 
DEVICE ES1869DD.SYS
[Table of contents] [Index] [DEVICES]
 
Driver for the ESS 1869 soundchip
 
DEVICE ES198X.SYS
[Table of contents] [Index] [DEVICES]
 
ESS Allegro-1/Maestro-3 PCI Audio Device Driver
 
DEVICE ESP.SYS
[Table of contents] [Index] [DEVICES]
 
Ray Gwinn's Hayes ESP device driver
 
DEVICE ET32ND.OS2
[Table of contents] [Index] [DEVICES]
 
KTI Networks Inc. base 10 t/tx PCI combo ethernet card
 
DEVICE ET32ND.SYS
[Table of contents] [Index] [DEVICES]
 
Driver for KTI Networks System ethernet card.
 
DEVICE ETHPCI.OS2
[Table of contents] [Index] [DEVICES]
 
Acton EN1207 Ethernet Card.
 
DEVICE EXCPHEAD.SYS
[Table of contents] [Index] [DEVICES]
 
New with eCS 1.1
 
DEVICE EXMOUSE2.SYS
[Table of contents] [Index] [DEVICES]
 
Kensington mouse driver for OS/2.
 
<<=NOTE=>> Doesn't work together with the Scitech Display driver
 
DEVICE EXP16.OS2
[Table of contents] [Index] [DEVICES]
 
Intel EtherExpress 16 Family Adapter Network driver
 
DEVICE EXTDSKDD.SYS
[Table of contents] [Index] [DEVICES]
 
EXTDSKDD.SYS supports external disk drives. See your online Command Reference for complete details.
 
DEVICE FASTNIC.OS2
[Table of contents] [Index] [DEVICES]
 
PCI 10/100 Fast Ethernet Adapter(AN981), PCI 10/100 Fast Ethernet Adapter(AN983), PCI 10/100 Fast Ethernet Adapter(DEC21140), PCI 10/100 Fast Ethernet Adapter(DEC21143) Network Driver
 
NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/amdtek.zip.
 
DEVICE FETND.OS2
[Table of contents] [Index] [DEVICES]
 
PCI Fast Ethernet 10M/100M Adapter
 
NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/via.zip.
 
DEVICE FLSH2MTD.SYS
[Table of contents] [Index] [DEVICES]
 
PCMCIA Storage Driver for OS/2 (FLASH MTD)
 
DEVICE FMD.SYS
[Table of contents] [Index] [DEVICES]
 
Driver required by Faxworks lite 2.* in Warp 3 or the Pro Versions of Faxworks/PMFax
 
Parameter:
 
L = disable logo on error free boot
T = do port tests (default)
N = no port tests, assume ports exist (PCMCIA default)
S = allow interrupt sharing (MCA bus only)
A = get ABIOS LID on port open (MCA bus only)
 
c = COM number (1-48)
h = I/O port address (in hex)
i = interrupt number
(defaults are for the standard COM ports)
 
DEVICE FMRADIO.SYS
[Table of contents] [Index] [DEVICES]
 
Driver for the FREE PMRADIO by Paul Ratcliffe.
 
OS/2 PM application for driving the Reveal RA300 FM radio card and the old version of the AIMS Labs. RadioTrack card.
 
Parameter:
 
/P:port port is the RA300 port address (in hex.). The port addresses supported are 30F and 20F. The /P parameter is optional and if not supplied, will default to address 30F.
 
The port address must match that which you have configured on the card itself using jumper JP1. The device driver is Resource Manager compliant and will not install if some other device has already claimed the ports (the hardware actually consumes 4 ports: 30C-30F or 20C-20F).
 
/V It may be specified if you don't wish the device driver to turn the radio volume down when shutting down OS/2.
 
=DEVICE=FTDVR.SYS=
The Ftdvr.sys driver is used by the BackMaster backup program. It is needed if your tape drive is connected to the floppy interface.
 
  Device=C:\BackMast\FTdvr.sys
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Fwip.sys=
Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IP packet filtering to the Firewall.
 
  DEVICE=C:\Mptn\Potocol\Fwip.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
 
=DEVICE=FXWRAP.SYS=
NDIS wrapper for the InJoy Firewall for OS/2
from: http://www.fx.dk/firewall
 
  DEVICE=FXWRAP.SYS
 
Designed with Cable Modems and LAN-2-LAN connections in mind, the InJoy Firewall is a complete Internet Gateway, Firewall and IPSec VPN gateway/client in one.
FEATURES: IPSec; PPPoE; Superior performance NDIS Protocol Engine; RFC 1631-NAT support; Direct Internet Access for your LAN PC's; Packet Filtering; Traffic Accounting, Port Redirection; Rule Based Access Control; Identd support; No reconfiguration of software; Great step-by-step docs; YK2; PM & text GUI; DHCP support; On-the-fly updates.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=GAMEDD.sys=
It is used by many Soundcards. It gives support for the Joystick connector for OS/2 programs.
 
  DEVICE=C:\MMOS2\GAMEDD.sys
 
The following joysticks are supported by this driver:
* Advance Gravis Analog Joystick
* Advance Gravis GamePad
* Advance Gravis Analog Pro
* CH Products Flightstick
* Dexxa Joystick ( Infrared )
* Kraft Thunderstick
* Logitech WingMan Extreme
* Logitech Wingman
* Thrustmaster XL Action Controller
 
There is also an Enhanced Joystick driver by Vesa J„„skel„inen who supports the following joysticks:
* Generic 4 axis and 4 button joystick
* Gravis GamePad Pro (in GrIP mode)
* CH FlightStick Pro
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=GAMEPRT2.SYS=
Joystick interface driver. By Jose DaSilva silva@dowco.com.
 
  DEVICE=GAMEPRT2.SYS <parameter>
 
'''Parameter:'''
 
* /VB
displays the gameport header at startup.
 
* /P:hhhh
Is the joystick port (hhhh=hex address of port)
 
* /W:hhhh
Is the wait run-a-way counter (hhhh=waiting time).
 
'''NOTE:''' This driver is incompatible with the original IBM GAMEDD.SYS. You must use GAMEDD.SYS from the same author.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=GAMEVDD.sys=
It is used by many Soundcards. It gives support for the Joystick connector for Dos and Windows programs.
 
  DEVICE=C:\MMOS2\GAMEVDD.sys
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=GENSCSI.SYS=
Generic SCSI device driver. The basic function of GENSCSI.SYS is to provide applications with an interface to OS2SCSI.DMD. It only answers 4 commands: Open, Close, IOCtl, and Init. All others cause an Invalid Command error. GENSCSI accepts IOCtl commands in the same format that OS2SCSI does, except GENSCSI expects all addresses to be ring 3 addresses while OS2SCSI expects them to be ring 0 addresses, physical addresses or scatter/gather lists. GENSCSI will convert the ring 3 addresses to the proper form and pass the command on to OS2SCSI. When OS2SCSI is done with the command, it returns the results back to GENSCSI who passes it back to the application. Developed by [[Dennis Rowe]] available for free as part of scsipg.zip.
 
  DEVICE=GENSCSI.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=GPH2USB.SYS=
USB driver for GPhoto2
 
  DEVICE=GPH2USB.SYS
 
NOTE: With this driver installed accessing your camera using the USBMSD.ADD or CWUSBMSD.ADD drivers doesn't work.
 
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=GRADD.SYS=
Graphiccard driver.
 
  DEVICE=C:\OS2\Boot\GRADD.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=GRAHPIRE.SYS=
WACOM Graphire Tablet device dependant OS/2 driver (serial model). It supports both Graphire Pen & Mouse and emulates usual 3-button serial mouse.
 
  DEVICE=GRAHPIRE.SYS <parameters>
 
'''Parameter:'''
 
* SERIAL=COMn
Specifies the COM Port, COM1 is used by default
 
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=HDLC.SYS=
HDLC Module for Teles ISDN Cards.
 
  DEVICE=HDLC.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=HPFEND.OS2=
HP DeskDirect 10/100 PCI LAN Adapter.
 
  DEVICE=HPFEND.OS2
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=HPS_S60H.SYS=
Sytos Premium Driver for HP SureStore 6000
 
  DEVICE=HPS_S60H.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=HRTIMER.SYS=
HRTIMER.SYS is a high resolution timer implemented as a device driver. Shows more accurate reading of e.g. the CPU-Meter in Memsize.
 
  DEVICE=HRTIMER.SYS
 
'''NOTE:''' Do not run any Windows session while using HRTIMER.SYS otherwise the output is either much too high or much too low. HRTimer (all versions) requires he time slice be less than 55 milliseconds. This should be the case in all unaltered environments. If you choose to increase the TIMESLICE setting in the CONFIG.SYS you may not be able to use HRTimer (readout too low).
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=I2OLOSM.OS2=
IBM I2O Token Ring LAN Driver
 
  DEVICE=I2OLOSM.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=IAS_DD.OS2=
OS/2 IrDA IAS Driver Copyright (C) IBM Corp. These drivers work on the IBM ThinkPad 380, 380D, 380E, 380ED, 380XD, 380Z, 385D, 385ED, 385XD, 560E, 560X, 560Z, 600, 600E, 770, 770E, 770ED, 770X. They do NOT work on the 560.
 
The IRCOMM.SYS driver make it possible to assign a virtual COM port to your Infrared attached IrCOMM
device (Cellular phone, etc.). You can then use any COM port aware application package to access the
device like through a normal COM port, i.e. issue AT commands to a modem, etc.
 
Communication Applications tested with this release are:
 
* InJoy IP Dialer V2.3
* Opalis BTX decoder (German online service)
* ...
 
IrCOMM also supports printing via the infrared port. Just install the right printer driver, then point it to the COM port IrCOMM is using. For Win-OS/2 printing, you can select the same COM port as you Win-OS/2 printer port.
 
Printers tested so far:
 
* HP LaserJet 6MP
* HP DeskJet 340
 
Whenever the IRCOMM driver detects a device, you will see the red indicator come on and tell you
there's an active connection.
 
  DEVICE=IAS_DD.OS2 <parameter>
 
'''Parameter:'''
 
* /L
Legacy mode support.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=IBG_DATI.DRV=
Sytos Plus driver for the IBM 2.0G 4mm Tape.
  DEVICE=IBG_DATI.DRV
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBM360P.SYS=
Pen for OS/2 Device Driver for IBM360P.
 
  DEVICE=IBM360P.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBM730T.SYS=
Pen for OS/2 Device Driver for IBM730T.
 
  DEVICE=IBM730T.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBM750P.SYS=
Pen for OS/2 Device Driver for IBM750P.
  DEVICE=IBM750P.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMCOMO.SYS=
Device driver for the IBM Advanced System Mangement service processor hardware.
  DEVICE=IBMCOMO.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMCSFLK.SYS=
Driver from Corrective Service Facility (CSF) necessary to exchange locked files. Normally this driver should only appear during the reboot after applying a fixpak. If you have this driver installed installation/exchange of locked files may have failed.
 
  DEVICE=IBMCSFLK.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMFE.OS2=
IBM 10/100 EtherJet PCI Adapter.
  DEVICE=IBMFE.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMGE.OS2=
IBM OS/2 1000Base-SX and 1000Base-T Gigabit Ethernet Adapter Support for Options by IBM 34L0301 1000BaseSX Gigabit Ethernet Adapter (See restrictions), Options by IBM 06P3701 1000BaseSX Gigabit Ethernet Adapter, Intel 82542 Based 1000BaseSX Gigabit Ethernet Adapter (See restrictions), Intel 82543 Based 1000BaseSX Gigabit Ethernet Adapter (PRO1000/F), Intel 82544 Based 1000BaseSX Gigabit Ethernet Adapter (PRO1000/XF)
 
  DEVICE=IBMGE.OS2
 
'''NOTE:''' It is designed to work with the 1000BaseSX Fiber Adapter only.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMLANLK.SYS=
Driver necessary to exchange locked files. Normally this driver should only appear during the reboot. So if you see it installation/exchange of locked files may have failed.
 
  DEVICE=IBMLANLK.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMSPO.SYS=
Device driver for the IBM Advanced System Mangement service processor hardware.
 
  DEVICE=IBMSPO.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=IBMTOK.OS2=
Network adapter driver for IBM Token-ring cards.
 
  DEVICE=C:\Ibmcom\Macs\IBMTOK.OS2
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Ifndis.sys=
Network protocol driver. Used by TCP/IP.
 
  DEVICE=C:\Mptn\Potocol\Ifndis.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Ipsec.sys=
Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IPSEC security to the Firewall.
 
  DEVICE=C:\Mptn\Potocol\Ipsec.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=Ipx.sys=
Gives support for the Novell Netware IPX protocol
 
  DEVICE=C:\Netware\Ipx.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=IRCOMM.SYS=
=DEVICE=IRDA_PHY.OS2=
=DEVICE=IRDA_DD.OS2=
 
=DEVICE=Killer.sys=
Used by the Watchcat task killer.
 
  DEVICE=C:\User\Watchcat\Killer.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Kmgax64.sys=
It is used by Matrox Graphiccards.
 
  DEVICE=C:\Mga\Os2\Kmgax64.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Lanmsgdd.os2=
Somewhere used by the network stuff.
 
  DEVICE=C:\Ibmcom\Lanmsgdd.os2 Parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Lanpdd.os2=
Part of MPTS. It enables the NetBIOS and the IEEE 802.2 Protocols to OS/2 Programs. It loads also support for the LAN Virtual Device Driver ( Lanvdd.os2 ).
 
  DEVICE=C:\Ibmcom\Protocol\Lanpdd.
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Lanvdd.os2=
Part of MPTS. It is the LAN Virtual Device Driver. It enables the NetBIOS and the IEEE 802.2 Protocols to Dos and Windows Programs.
 
  DEVICE=C:\Ibmcom\Protocol\Lanvdd.os2
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Log.sys=
This driver enables logging of system error messages and some application error messages.
 
note: You need also logdaem.exe
 
  DEVICE=C:\OS2\LOG.SYS [parameters]
 
Parameters:
 
* /E:value
 
This sets up the log buffer size.
Value can be in the range from 4 to 64 .
Default = 8
This value is expressed in Kbytes.
 
* /A:value
This is the size of the alarm buffer.
Value can be in the range from 4 to 64 .
Default = 8
This value is expressed in Kbytes.
 
* /OFF
If set to OFF the driver is installed but the logging of error messages is turned off. You can turn it on again with the program Syslog.
 
See the examples below.
 
To install the log driver with a log buffer size of 48 Kbytes and an alarm buffer of 16 Kbytes, add this line to your config.sys file:    DEVICE=C:\OS2\LOG.SYS /E:48 /A:16
 
To install the log driver but turn it off after initialization use this line:
  DEVICE=C:\OS2\LOG.SYS /OFF
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Lptdd.sys=
This driver allows a DOS session to print to an LPT port that has been redirected (or captured) to a network printer.
 
  DEVICE=C:\OS2\Mdos\Lptdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Lsl.sys=
This is the Link Support Layer driver. It is the lowest layer in the Novell Open Data Link Interface model and is required for the requester.
 
  DEVICE=C:\Netware\Lsl.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=MD5.sys=
Used by the Firewall built into TCP/IP 4.1 and above. This driver adds MD5 encryption to the Firewall.
 
  DEVICE=C:\Mptn\Potocol\MD5.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Midi.sys=
RTMIDI helper driver. Is used by your Soundcard, but RTMIDI will work only if your Soundcard supports RTMIDI with the audio driver.
 
  DEVICE=C:\OS2\Boot\Midi.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Mouse.sys=
Provides support for your mouse. You need also the Pointdd.sys installed.
 
  DEVICE=C:\Os2\Boot\Mouse.sys parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Mpu401.sys=
Provides support for the MPU401 connector on your soundcard.
 
  DEVICE=C:\Os2\Boot\Mpu401.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=NetBeui.os2=
This is the NetBIOS protocol driver.
 
  DEVICE=C:\Ibmcom\Protocol\NetBeui.os2
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=NetBios.os2=
This is the NetBIOS API driver.
 
  DEVICE=C:\Ibmcom\Protocol\NetBIOS.os2
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=NetBios.sys=
This driver provides NetBIOS support in the Netware client.
 
  DEVICE=C:\Netware\NetBIOS.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=NmPipe.sys=
This driver provides Named Pipes support on the Netware client.
 
  DEVICE=C:\Netware\Nmpipe.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=NpServer.sys=
This driver allows your workstation to function as a Named Pipes Netware server.
 
  DEVICE=C:\Netware\NpServer.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Ntr2000.sys=
ODI (Netware) driver for Token Ring network adapter cards.
 
  DEVICE=C:\Netware\Ntr2000.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Nwreq.sys=
This is the main Netware requester module and must appear in config.sys after the NmPipe.sys , Ipx.sys and Spx.sys drivers.
 
  DEVICE=C:\Netware\Nwreq.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Odi2Ndi.sys=
This driver allows the Netware client to use MPTS as the interface to a network adapter driver and in turn, the LAN.
 
  DEVICE=C:\Netware\Odi2Ndi.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Opl3.sys=
Is used by soundcards with an OPL3 sound chip.
 
  DEVICE=C:\Os2\Boot\Opl3.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Opl3sa.sys=
It is used by Soundcards with Yamaha SAx sound chips.
 
  DEVICE=C:\Mmos2\Opl3sa.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Opl3vdd.sys=
It is used by Soundcards with Yamaha SAx sound chips. It provides support for DOS sessions.
 
  DEVICE=C:\Mmos2\Opl3vdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Os2cdrom.dmd=
Provides support for IDE CDRom drives. It is a device manager driver.
 
note: To get CDRom support in OS/2 you must also install Ibm1s506.add and Ibmidecd.flt .
 
  BASEDEV=Os2cdrom.dmd parameters
 
Parameters:
 
* /V
Displays some information about your CDRom drive during the boot.
 
* /Q
Stops displaying error messages during the boot.
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Os2.sys=
This is a driver for the Iomega ZIP-100 drives. It works only with the older models.
 
  DEVICE=C:\oad\OS2.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=P9100.sys=
Is used by graphiccards with a Weitek P9100 chip.
 
  DEVICE=C:\Os2\Boot\P9100.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Pmdd.sys=
Installs pointer draw device driver support.
 
  DEVICE=C:\Os2\Boot\Pmdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Pointdd.sys=
Provides mouse pointer draw support.
 
  DEVICE=C:\Os2\Boot\Pointdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Protman.os2=
Network protocol-manager driver.
 
  DEVICE=C:\Ibmcom\Protman.os2 Parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=R0stub.sys=
Is somewhere used by MMOS2.
 
  DEVICE=C:\Mmos2\R0stub.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=RdrHelp.200=
This driver is part of MPTS and is necessary somewhere for the NetBIOS protocol.
 
  DEVICE=C:\Ibmcom\Netprog\Rdrhelp.200
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Route.sys=
This driver allows a Netware client to see Netware servers on other physical LAN (or segment) across source-routing routers (used by many IBM routers). This is equivalent to Route.nlm for a Netware server.
 
  DEVICE=C:\Netware\Route.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Rzt2boot.sys=
This driver is used by the IBM AO-Manager.
 
  DEVICE=C:\SMG\Bin\Rzt2boot.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Sbawed2.sys=
It is used by Creative Labs AWE32 soundcards.
 
  DEVICE=C:\Sbos2\Sbawed2.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=SddHelp.sys=
 
The helper driver for the Scitech Software Display Doctor for OS/2. The Display Doctor is a universal driver for almost every graphiccard. This software is currently in BETA test!
 
  DEVICE=C:\OS2\Sdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Sesdd32.sys=
 
Security device driver.
 
  DEVICE=C:\Os2\Boot\Sesdd32.sys
 
More information will be available in one of the next releases of the Config.Sys Documentation Project.
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Sio.sys=
The Sio.sys driver is a replacement for the com.sys driver. The Sio.sys driver can support up to 16 COM ports.
 
  DEVICE=C:\Os2\Boot\Sio.sys parameters
 
* DEVICE=C:bslbootbslSio.Sys (Cn, An, In, Ig, Fc) :hp4. [(Cn, An, In, Ig, Fc)] :ehp4.
 
o CN
The number of the Com port or the string COM1 to COMn.
If you use a * in front of the Com port, then the port will be used as a PCMCIA Com port.
 
o AN
A hexnumber to define the I/O address of the Com port.
 
o IN
The IRQ number (0 to 15) or the string IRQ0 to IRQ15. If you don't use this parameter, SIO will search for a IRQ.
 
o IG
This exists only for compatibility with COM.SYS and is ignored by Sio.sys.
 
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Snd16.sys=
The Snd16.sys driver is used by the MAD16 soundcard.
 
  DEVICE=C:\Os2\Boot\Snd16.sys parameters
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Sockets.sys=
Network driver.
 
  DEVICE=C:\Mptn\Potocol\Sockets.sys Parameter
 
Parameters:
 
* /c:value
Number of the COM port to which debug information should be send to. Value can be any valid COM port number .
Default = 2
 
* /v
Display the banner at boot time.
 
* /uis:0
Turn of unique ID for select().
If this parameter is not set it defaults to ON .
 
* /mem:value
Number of 4kbyte clusters allocated at initialization time.
Value can be in the range from 30 to 32766 . Default = 75
 
* /gdt:value
The maximum number of 64kbyte blocks the stack can allocate.
Default = 80
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Spx.sys=
Provides support for the Novell Netware SPX protocol.
 
  DEVICE=C:\Netware\Spx.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Ssmdd.sys=
Is somewhere used by MMOS2.
 
  DEVICE=C:\Mmos2\Ssmdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Svdisk.sys=
This is the driver for the Super Virtual Disk tool, which emulates a floppy drive in memory.
 
  DEVICE=C:\SVDisk\SVDisk.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Sysinfo.sys=
This driver is needed foby the System Information Tool.
 
  DEVICE=C:\Netfin\Sysinfo.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=TcpBeui.os2=
This is the TCPBEUI (NetBIOS over TCP/IP) protocol driver.
 
  DEVICE=C:\Ibmcom\Protocol\TcpBEUI.os2
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Testcfg.sys=
Test configuration device driver.
 
  DEVICE=C:\Boot\Testcfg.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=USBAUDIO.SYS=
Driver for USB audio devices. The only devices you can use with it at the moment are loudspeakers from Labtec.
 
  DEVICE=C:\Os2\Boot\USBAUDIO.SYS
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=USBCOM.SYS=
Driver for USB modems. At the moment support is only available for some devices from IBM and US-Robotics. The Usbcom.sys driver emulates an aditional COM port, this allows you to use your terminal or Internet dialer software with the USB modem.
 
  DEVICE=C:\Os2\Boot\Usbcom.sys <parameters>
 
'''Parameters:'''
 
* /N:Value
Here can you control under which COM port number the USB device is available. Value can be in the range from 1 to 9 . It had to be a non used COM port number. The default value is the first non used COM port number.
 
* /V
With this parameter gives the driver you some status information during the boot.
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=USBMOUSE.SYS=
Driver for USB mouse. At the moment only some mouse from Logitech and IBM are supported.
 
  DEVICE=C:\Os2\Boot\USBMOUSE.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=USBPRT.SYS=
Driver for USB printers.
 
  DEVICE=C:\OS2\BOOT\USBPRT.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=USBQSER.SYS=
 
  DEVICE=C:\OS2\BOOT\USBQSER.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=USBSER.SYS=
 
  DEVICE=C:\OS2\BOOT\USBSER.SYS
 
'''Platform Support:'''
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|No
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Uslgenio.sys=
Driver for the TampV HappyPlayer, this driver can be used with TV-card which have a BT848, BT849, BT878 or a BT879 chip. This driver will not work with other TV applications.
 
    DEVICE=C:\Apps\HappyTV\Uslgenio.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=V8514a.sys=
Virtual device driver for 8514 graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\V8514a.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vad64.sys=
Virtual Device driver used by ATI 3D Rage graficcards. Gives support for DOS and WIN-OS/2.
 
  DEVICE=C:\OS2\Vad64.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vapm.sys=
Virtual device driver for Advanced Power Management used by DOS and Windows.
 
DEVICE=C:\Os2\Boot\Vapm.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vcdrom.sys=
Virtual device driver for CDRom drives used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vcdrom.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=VCfos.Sys=
Gives support for CFOS in DOS and Windows.
 
  DEVICE=C:\Cfos\Vcfos.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vcga.sys=
Virtual device driver for CGA graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Mdos\Vcga.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vcom.sys=
 
Virtual device driver for the serial Ports COMx, used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vcom.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vcshdd.sys=
Is needed for the video parts of MMOS2.
 
  DEVICE=C:\Mmos2\Vcshdd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vdostcp.sys=
Virtual device driver for the TCP/IP protocol used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vdostcp.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vdostcp.vdd=
Virtual device driver for the TCP/IP protocol used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vdostcp.vdd
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vdpmi.sys=
Supports the DPMI memory access and is required to support all Windows applications.
 
  DEVICE=C:\OS2\Mdos\Vdpmi.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vdpx.sys=
This driver is the protected mode to real mode driver for DPMI applications.
 
  DEVICE=C:\OS2\Mdos\Vdpx.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vega.sys=
 
Virtual device driver for EGA graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vega.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vemm.sys=
Used to support Extended Memory use in DOS and Windows programs.
 
  DEVICE=C:\OS2\Mdos\Vemm.sys parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vfdisk.sys=
Virtual Floppy Disk driver, it emulates a floppy drive in the memory.
 
  DEVICE=C:\Os2\Boot\Vfdisk.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
 
=DEVICE=Vipx.sys=
This driver enables the Novell Netware IPX support for DOS based Netware utilities.
 
  DEVICE=C:\Netware\Vipx.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vkbd.sys=
Virtual device driver for the keyboard used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vkbd.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vmad16.sys=
Virtual device driver for the MAD16 soundcard used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vmad16.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vmanwin.sys=
This driver is used by your Graphiccard to support Windows.
 
  DEVICE=C:\OS2\Mdos\Vmanwin.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vmgax64.sys=
Virtual device driver for Matrox graphic cards.
 
  DEVICE=C:\Mga\OS2\Vmgax64.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vmono.sys=
Virtual device driver mono-graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vmono.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vmouse.sys=
Virtual device driver for the mouse used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vmouse.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vnetapi.os2=
This driver is part of the File and Print client for OS/2.
 
  DEVICE=C:\Ibmlan\Netprog\Vnetapi.os2
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vp9100.sys=
Virtual device driver for Weitek P9100 based graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\VP9100.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vp91vga.sys=
Virtual device driver for Weitek P9100 based graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vp91vga.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vpcmcia.sys=
This driver gives support for PCMCIA cards in DOS and Windows sessions.
 
  DEVICE=C:\Boot\Vpcmcia.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vprpmi.sys=
Private video PMI virtual device driver.
 
  DEVICE=C:\OS2\Mdos\Vprpmi.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vshell.sys=
This dricver loads the Novell Netware network shell. It is automatically used for all DOS and Windows sessions that require it.
 
  DEVICE=C:\Netware\Vshell.sys parameter
 
Parameters:
 
Value can be Global or Local .
Default = Global
 
:Li. Global
All DOS, Windows and OS/2 sessions set up for global login support share a single login to a Netware server. Drive mappings and port captures from one session apply to all the other sessions. This is useful in environments where the number of connections is carefully monitored. :Li. Local
All DOS and Windows sessions set up for private login support have their own logins to a Netware server. Drive mappings and port captures from one session do not apply to the other sessions. This is useful in environments where users need logins from DOS and Windows sessions to be separate from logins from OS/2 sessions.
 
You can change this parameter also in the DOS/Windows settings of each Program object.
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vsio.sys=
Virtual device driver for the serial ports COMx used by DOS and Windows. This is a replacement for the Vcom.sys driver.
 
  DEVICE=C:\Os2\Boot\Vsio.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vsvga.sys=
Virtual device driver for SVGA graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vsvga.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vvga.sys=
Virtual device driver for VGA graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vvga.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vw32s.sys=
Supplies support for the WIN32S Windows APIs. Only needed for Windows programs that use WIN32S APIs.
 
  DEVICE=C:\OS2\Mdos\VW32S.sys parameters
 
note: This driver has no parameters.
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vwcat.sys=
This driver is used by the Watchcat task killer.
 
  DEVICE=C:\user\watchcat\Vwcat.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vwin.sys=
This driver provides seamless Windows support in Win-OS2.
 
  DEVICE=C:\OS2\Mdos\Vwin.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vxga.sys=
Virtual device driver for XGA graphiccards used by DOS and Windows.
 
  DEVICE=C:\Os2\Boot\Vxga.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Vxms.sys=
Supports Extended Memory in DOS and Windows applications.
 
  DEVICE=C:\OS2\Mdos\Vxms.sys parameter
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Watchcat.sys=
This driver is used by the Watchcat task killer.
 
  DEVICE=C:\User\Watchcat\watchcat.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=Wcast.sys=
This driver gives support for all PCI Hauppauge TV-cards. The USB versions are NOT supported.
 
  DEVICE=C:\MMOS2\Wcast.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}
 
=DEVICE=XF86Sup.sys=
Driver needed by XFree86/OS2, You will be unable to run XFree86/OS2 without the XF86sup.sys driver.
 
  DEVICE=C:\XFree86\lib\XF86Sup.sys
 
<b>Platform Support:</b>
{| class="wikitable" style="text-align:center" border="1"
|-
!OS/2 2.x
!OS/2 3.0
!OS/2 4.0
!OS/2 4.5x
!eCS 1.x
!eCs 2.x
|-
|Yes
|Yes
|Yes
|Yes
|Yes
|Yes
|}

Latest revision as of 03:25, 27 April 2025

The Config.sys Documentation Project
  1. BASEDEV Statements
  2. CALL Statements
  3. DEVICE Statements
  4. IFS Statements
  5. OS/2 Commands
  6. DOS Commands
  7. RUN Statements
  8. SET Statements
  9. PSD Statements
  10. Other Information
  1. Programs
  2. Hardware
  3. List of Statements

Device Drivers are needed by OS/2 to work with your installed hardware.

The Device Drivers are loaded after the Base Device Drivers. Unlike them the Device Drivers are loaded in the order they appear in the CONFIG.SYS file.

The following pages describe these entries:

Chipset Support

PC Card/CardBus

PCI

Power Management

Processor

Storage

Network Adapters

NDIS MAC

Arcnet
  • MSARC.OS2 - Microsoft Arcnet
  • SMC_ARC.OS2 - SMC ARCNET PS110, PC110-PC650
  • TCCARC.OS2 - Thomas-Conrad Arcnet
DirecPC
Ethernet
  • ACCND.OS2 - ACCTON EN1207D Series Ethernet PCI
  • AM2100.OS2 - AMD Series 2100
  • ASNPCI.OS2 - Asante Fast 10/100 PCI
  • B44A.OS2 - Broadcom BCM4401
  • B57.OS2 - Broadcom NetXtreme
  • CBENDIS.OS2 - Xircom CardBus 10/100
  • CE3NDIS.OS2 - Xircom Ethernet 10/100
  • COMETA.NIF - ADMtek Comet/Centaur
  • DC21X4.OS2 - DEC/Intel DC21X4X
  • DE100.OS2 - D-Link DE-100 Ethernet Card
  • DE200.OS2 - D-Link DE-200
  • DE220.OS2 - D-Link DE-220
  • DE250.OS2 - D-Link DE-250
  • DE300.OS2 - D-Link DE-300 Ethernet Card
  • DE305.OS2 - DEC EtherWORKS ISA
  • DE320.OS2 - D-Link DE-320CT Ethernet Card
  • DE400.OS2 - D-Link DE-400 EISA
  • DE450.OS2 - DEC EtherWORKS TURBO PCI
  • DE500.OS2 - D-Link DE-500 VESA Bus Master Ethernet Card
  • DE528.OS2 - D-Link DE-528CT PCI
  • DE600.OS2 - D-Link DE-600
  • DE620.OS2 - D-Link DE-620 Pocket LAN
  • DE65S.OS2 - D-Link DE-650 PCMCIA
  • DE660.OS2 - D-Link DE-660 PC Card
  • DEPCA.OS2 - DEC EtherWORKS (LC, MC, EISA, Turbo)
  • DFE650.OS2 - D-Link DFE-650 PC Card
  • DLKFET.OS2 - D-Link DFE-530TX
  • DLKPCI.OS2 - D-Link Fast Ethernet PCI
  • DLKRTS.OS2 - D-Link DFE-530TX+
  • DM9PCI.OS2 - Davicom DM9xxx PCI
  • DP815A.OS2 - NSC DP83815
  • DP820A.SYS - NS DP83820
  • DP83815.OS2 - NS DP83815
  • DP83820.OS2 - NS DP83820 Gigabit
  • E1000.OS2 - Intel PRO/1000
  • E100B.OS2 - Intel EtherExpress PRO/100
  • E10P.OS2 - Intel EtherExpress PRO/10 PCI
  • E11ND.OS2 - Cabletron E11 Ethernet Adapter
  • E20NDIS.OS2 - Cabletron E2010
  • E21ND.OS2 - Cabletron E21 Ethernet Adapter
  • E22ND.OS2 - Cabletron E22 Ethernet
  • E31ND.OS2 - Cabletron E31 Ethernet Adapter
  • EC2T.OS2 - Linksys Combo PCMCIA
  • ED586.OS2 - Eden ED586/32
  • EL515.OS2 - 3Com Fast EtherLink ISA
  • EL59X.OS2 - 3Com EtherLink PCI
  • EL90X.OS2 - 3Com Fast EtherLink XL
  • ELNK.OS2 - 3Com EtherLink
  • ELNK16.OS2 - 3Com EtherLink 16 (3c507)
  • ELNK3.OS2 - 3Com EtherLink III
  • ELNKII.OS2 - 3Com EtherLink II (3c503)
  • ELNKMC.OS2 - 3Com EtherLink/MC (3c523)
  • ELNKPL.OS2 - 3Com EtherLink Plus (3C505)
  • ELPC3.OS2 - 3Com 3C589 EtherLink III
  • EN5251.OS2 - Accton EN5251
  • ENDS2ISA.OS2 - Crystal CS89x0
  • ENET.OS2 - Compex ENET Ethernet
  • EP325.OS2 - Surecom EP-325
  • EP427.OS2 - SureCom EP-427
  • EPRO.OS2 - Intel EtherExpress PRO/10
  • ES3210.OS2 - Racal-Datacom ES3210 EISA
  • ET32ND.OS2 - KTI PCI Ethernet
  • ETHIIE.OS2 - ICL EtherTeam 16
  • ETHNE.OS2 - Accton EtherCoax 16N
  • ETHPCI.OS2 - Accton EN1207
  • EXP16.OS2 - Intel EtherExpress 16
  • EXP32.OS2 - Intel EtherExpress/32
  • FASTNIC.OS2 - PCI 10/100 Fast Ethernet Adapter
  • FETND.OS2 - VIA Fast Ethernet
  • HLS6130.OS2 - Hughes LAN Systems HLS-6130
  • HPLAN.OS2 - Hewlett Packard Ethertwist/MC
  • HPLANB.OS2 - Hewlett Packard Ethertwist
  • HPLANE.OS2 - Hewlett Packard Ethertwist EISA LAN Adapter/32
  • HPLANP.OS2 - Hewlett Packard PC LAN Adapter/16+
  • I82593.OS2 - Intel 82593 Motherboard LAN Module
  • IBMEANDI.OS2 - IBM PCI Ethernet Adapter Driver
  • IBMEINDI.OS2 - IBM EtherJet ISA Ethernet Adapter
  • IBMENI.OS2 - IBM LAN Adapter for Ethernet
  • IBMENII.OS2 - IBM LAN Adapter/A for Ethernet
  • IBMESAN2.OS2 - IBM EISA Ethernet Adapter
  • IBMEXNDI.OS2 - IBM EtherJet PC Card Ethernet Adapter
  • IBMFE.OS2 - IBM 10/100 EtherJet PCI
  • IBMGC.OS2 - IBM 1000BaseT Gigabit Ethernet Adapter
  • IBMGE.OS2 - IBM 1000BaseSX Gigabit Ethernet
  • IBMGU.OS2 - IBM Gigabit Ethernet Adapter
  • KTC110.OS2 - Kingston EtheRx
  • KTC111.OS2 - Kingston Fast EtheRx KNE111TX
  • KTC120.OS2 - Kingston EtheRx
  • KTC40.OS2 - Kingston EtheRx PCI
  • L100.OS2 - PNIC
  • LNEPCI.OS2 - Linksys LNE100TX
  • LNE100.OS2 - Linksys LNE100TX v4
  • MAC586.OS2 - DCA/10NET
  • MACETH.OS2 - IBM PS/2 Adapter for Ethernet Networks
  • MACEVX.OS2 - Everex SpeedLink EV2026/EV2027
  • MACWD.OS2 - Western Digital EtherCard Plus
  • MCS7830.OS2 - Moschip MCS7830
  • MMLEM.OS2 - Intel® PRO/1000 Legacy NIC Driver
  • MXNICF.OS2 - Macronix MX987xx
  • N100.OS2 - Compaq Fast Ethernet
  • NCC16.OS2 - Tulip NCC-16
  • NE1000.OS2 - Novell NE1000
  • NE2000.OS2 - Novell NE2000
  • NE3200.OS2 - Novell NE3200
  • NETFLX3.OS2 - Compaq NetFlex-3/Netelligent
  • NI5210.OS2 - Racal-Datacom NI5210
  • NI6510.OS2 - Racal-Datacom NI6510
  • NI9210.OS2 - Racal-Datacom NI9210
  • NSEISA.OS2 - National Semiconductor SONIC EISA
  • PC100.OS2 - Linksys EtherFast 10/100 PC Card
  • PCIND.OS2 - Realtek RTL8029 PCI
  • PCMNICCS.OS2 - IBM Ethernet Adapter PCMCIA
  • PCNTND.OS2 - AMD PCNet
  • PDIETH.OS2 - PureData PDI8023
  • PNPND.OS2 - Realtek RTL8019 ISA PnP
  • RCE.OS2 - RCE 10Base-T 8-/16-Bit
  • RMATETH.OS2 - Research Machines Ethernet
  • RMMCETH.OS2 - Research Machines Ethernet MC
  • RTFND.OS2 - Realtek RTL8129 PCI Fast Ethernet
  • RTGNDA.OS2 - Realtek RTL8168 Gigabit
  • RTL09.OS2 - Realtek RTL8009 ISA Ethernet Adapter
  • RTSND.OS2 - Realtek RTL8139
  • SIS900.OS2 - SiS 900/7016
  • SK98ND.OS2 - SysKonnect SK-9E21D, SK-9521
  • SMC1208.OS2 - SMC EZ PCI
  • SMC3016 - SMC 3016 Series
  • SMC8000.OS2 - SMC 8xxx
  • SMC9432.OS2 - SMC EtherPower II
  • SMCMAC.OS2 - SMC EtherCard PLUS ELITE Series
  • SMCND.OS2 - SMC 1211TX
  • SMCPWR.OS2 - SMC EtherPower
  • SPIDER.OS2 - Spider Systems
  • TC902X.OS2 - Tamarack TC9021
  • TNDIS.OS2 - Tiara EtherStar LanCard/E
  • TSBETHER.OS2 - ToshibaLAN Internal
  • UBNEI.OS2 - Ungermann-Bass PCNIU
  • USBETHR.OS2 - Kawasaki USB Ethernet 10Mbit
  • VGEND2.OS2 - VIA VT612x Velocity
  • W840ND.OS2 - Winbond W89C840
  • W940ND.OS2 - Winbond W89C940
  • XCEMNDIS.OS2 - Xircom CEM56-100
  • ZX312.SYS - ZNYX ZX312 EtherAction
FDDI
  • AT_LM.OS2 - Network Peripherals NP-AT
  • DEFEA.OS2 - DEC FDDIcontroller/EISA
  • DEFPA.OS2 - DEC FDDIcontroller/PCI
  • DF300.OS2 - D-Link DF300
  • DF400.OS2 - D-Link DF400
  • EISA_LM.OS2 - Network Peripherals NP-EISA
  • FDDILINK.OS2 - 3Com FDDILink
  • FLINK.OS2 - 3Com FDDILink PCI
  • IBMFDX.OS2 - IBM FDDI FI Adapter
  • SKFE.OS2 - SK-NET FDDI EISA
  • SKFI.OS2 - SK-NET FDDI ISA
  • SKFM.OS2 - SK-NET FDDI MCA
  • SKFPNO.OS2 - SK-NET FDDI PCI
Infrared
Intelligent Boards
ScaNet
Token-Ring
  • CPQTOK.OS2 - Compaq Token Ring Adapter
  • DLKTOK.OS2 - D-Link DT-650
  • DT620.OS2 - D-Link DT-620
  • EISANDIS.OS2 - Racore EISA TR
  • IBM16TR.OS2 - IBM Token-Ring Network 16/4 Adapter II
  • IBMEITR.OS2 - IBM 16/4 Busmaster EISA Adapter
  • IBMMPC.OS2 - IBM Auto LANStreamer PCI
  • IBMTOK.OS2 - IBM Token-Ring
  • IBMTOKCS.OS2 - IBM Turbo 16/4 Token-Ring PC Card
  • IBMTOKMP.OS2 - IBM SMP Token-Ring
  • IBMTRBM.OS2 - IBM Token-Ring Bus Master
  • IBMTRP.OS2 - IBM Token-Ring PCI
  • INTEL16.OS2 - Intel TokenExpress 16/4
  • INTEL32.OS2 - Intel TokenExpress EISA/32
  • MDGND.OS2 - Madge
  • NCRTRN.OS2 - NCR Token-Ring Adapter
  • OLITOK.OS2 - Olicom, Intel TokenExpress
  • OLITOK16.OS2 - Olicom Token-Ring Network 16/4 Adapter
  • RESETOKN.SYS - Reset the token-ring card before startup the LSP drivers
  • RCPTRNDS.OS2 - Racore Preferred Token Ring
  • RTR16NDIS.OS2 - Racore 16/4 Token-Ring Adapter
  • SMARTND.OS2 - Madge Networks Smart 16/4
  • SMC8100.OS2 - SMC TokenCard EliteSeries
  • SMC8332.OS2 - SMC TokenCard Elite Master32
  • T20NDIS.OS2 - Cabletron T2015 4/16 Mbps DNI
  • T30NDIS.OS2 - Cabletron T3015 4/16 Mbps DNI
  • TCCTOK.OS2 - Thomas-Conrad Token Ring
  • TL3C3X9.OS2 - 3Com TokenLink PCI
  • TLNK.OS2 - 3Com TokenLink (3C603)
  • TLPC3.OS2 - 3Com TokenLink PCCard
  • TOKWD.OS2 - Western Digital TokenCard WD8005/WD8015
  • TR2KNDIS.OS2 - Texas Instruments TokenLite
VG AnyLAN
Wireless
  • AIRO340.SYS - Cisco Systems 340 Series Wireless
  • ARLTNDIS.OS2 - ARtem Onair ComCard 11 PCCard
  • BIXANDIS.OS2 - BinTec XAIR
  • IBMPRISM.OS2 - IBM miniPCI PRISM 2.5 Wireless Card
  • IBMWIFI2.OS2 - IBM High Rate Wireless LAN PC Card-128
  • IRMAC.OS2
  • WAVELAN.OS2 - NCR WaveLAN AT & MC

NDIS Protocols

NetWare Requester

LAN interfaces for ARCNET

  • RXNET_AT.SYS - SMC PS110, Novell RX-Net
  • RXNET_MC.SYS - Novell RX-Net/MC
  • TRXNET.SYS
  • TRXNET2.SYS

LAN interfaces for Ethernet

  • 3C501.SYS - 3Com EtherLink 3C501
  • 3C503.SYS - 3Com EtherLink 3C503
  • 3C505.SYS - 3Com EtherLink 3C505
  • 3C523.SYS - 3Com EtherLink/MC 3C523
  • E3C501.SYS - 3Com EtherLink 3C501
  • NE1000.SYS - Novell NE1000
  • NE2000.SYS - Novell NE2000
  • NE2.SYS - Novell NE/2
  • NE2-32.SYS
  • WD.SYS - Western Digital 8003E. 8003EP, 8013EB, 8013EP/A, 8013W, 8013EW, 8013WP/A

LAN interfaces for PC Network

  • PCN2_AT.SYS - IBM PC Network Adapter
  • PCN2_MC.SYS - IBM PC Network Adapter/A
  • PCN2.SYS

LAN interfaces for Token-Ring

  • TOKEN.SYS - IBM Token-Ring adapters
  • TOKENEE.SYS or CMGRLAN.SYS

ODI

  • CBEODI.OS2 - Xircom CardBus
  • CPQNF3.SYS - Compaq NETFLEX-3
  • GEAT2ODI.SYS - G/Ethernet 16-bit AT adapter
  • GEMC20DI.SYS - G/Ethernet Microchannel adapter
  • NTR2000.SYS - Novell NTR2000
  • OS2MLID.SYS - Accton Ethernet
  • PCIOS2.SYS - Realtek RTL8029
  • RTSOS2.SYS - Realtek RTL8139
  • SMC8000.SYS - SMC/WD EtherCard
  • TROPODI.SYS - Accton RingPair-4/16T
  • TRPKTODI.SYS - Accton RingPocket
  • XCEMODI.OS2 - Xircom CEM56-100

Communications

Input Devices

Gameport

Keyboard

Pointer Devices

Mouse
Pen
Touchscreen

Scanner & Camera

Multimedia Devices

Audio Adapter

Radio FM

Video/TV Adapter

USB

Virtualisation

MDOS VDD

Graphics
Audio
LAN
Communications
Misc

Virtual PC

VirtualBox

Others

See also

Retrieved from "https://www.edm2.com/index.php?title=CONFIG.SYS_-_DEVICE_Statements&oldid=85987"