MPU401.SYS: Difference between revisions

Latest revision as of 14:13, 10 April 2019

Provides support for the MPU401 interface.

DEVICE=\OS2\BOOT\MPU401.SYS <parameter>

Parameter:

/Pn:hhh - Basis I/O (Port) Address.
/In:ddd - Interrupt Level. With the Theta Band driver it can be set to 0 so TIMER0 is used during record.
/N:sss - Name of the driver. Default is MPU401$
/R:ddd - TIMER0 resolution in milliseconds. Default 2.
/V - Verbose
/O:sss - Options
- L or LONGNAME - Long RTMIDI Names
- QUIETINI - Ignore Initialization errors
- NORMIO Do not check/register I/O addresses with RM
- SHAREDIO Check/register I/O addresses as shared
- MULTIO Check/register I/O addresses as multiplexed
- NORMIRQ Do not check/register IRQ's with RM
- SHAREDIRQ Check/register IRQ's as shared
- MULTIRQ Check/register IRQ's as multiplexed
- NOCHECKIO Do not verify I/O addresses
- NOCHECKIRQ Do not verify IRQ's
- NOTIMER0 Do not use TIMER0
- 10BITS Use 10-bit address width with RM
- 16BITS Use 16-bit address width with RM
- ONLYONE Locate only one MPU401 device
- AUDIOVDD Enable DOS sharing (Only for Theta Band driver).

@@ Line 1: / Line 1: @@
 Provides support for the MPU401 interface.
-  DEVICE=C:\Os2\Boot\MPU401.SYS <parameter>
+  DEVICE=\OS2\BOOT\MPU401.SYS <parameter>
+{{ProdS |V30=S|V31=S|V40=S|V45=S}}
 '''Parameter:'''
 * /Pn:hhh - Basis I/O (Port) Address.
@@ Line 12: / Line 12: @@
 ** QUIETINI - Ignore Initialization errors
 ** NORMIO Do not check/register I/O addresses with RM
-** SHAREDIO Check/register I/O adresses as shared
+** SHAREDIO Check/register I/O addresses as shared
-** MULTIO Check/register I/O adresses as multiplexed
+** MULTIO Check/register I/O addresses as multiplexed
 ** NORMIRQ Do not check/register IRQ's with RM
 ** SHAREDIRQ Check/register IRQ's as shared
 ** MULTIRQ Check/register IRQ's as multiplexed
-** NOCHECKIO Do not verify I/O adresses
+** NOCHECKIO Do not verify I/O addresses
 ** NOCHECKIRQ Do not verify IRQ's
 ** NOTIMER0 Do not use TIMER0
 ** 10BITS Use 10-bit address width with RM
-** 16BITS Use 16-bit adress width with RM
+** 16BITS Use 16-bit address width with RM
 ** ONLYONE Locate only one MPU401 device
 ** AUDIOVDD Enable DOS sharing (Only for Theta Band driver).
-'''Platform Support:'''
-{| class="wikitable"
-|-
-!OS/2 2.x
-!OS/2 3.0
-!OS/2 4.0
-!OS/2 4.5x
-|-
-|Yes
-|Yes
-|Yes
-|Yes
-|}
 [[Category:DEVICE Statements]]