IBMIDECD.FLT: Difference between revisions

Latest revision as of 23:14, 30 January 2024

This filter driver makes your IDE CD-ROM drive visible to OS/2. Support for ATAPI CD-ROM drives attached to an IDE Port. Superseded by IBMATAPI.FLT Version 10.085.

Version

Date	Version	Size	Comments
1995-10-30	8.157	20,358 bytes
1998-04-20	9.23	24,080 bytes
	10.047		IDE CD-RW support
2002-10-08	10.085	39,416 bytes	Extended Warm Swap Support
2003-01-17	10.095	24,652 bytes

CONFIG.SYS Information

This filter driver makes IDE CD-ROM drives visible to OS/2. Support for ATAPI CD-ROM drives attached to an IDE Port. Superseded by IBMATAPI.FLT V 10.085. It is important to use IBMIDECD.FLT with the IBM1S506.ADD driver. Since Ver. 10.047 IDE CD-Writers for reading/writing are supported.

Note: To get CD-ROM support in OS/2 you must also install IBM1S506.ADD and OS2CDROM.DMD.

BASEDEV=IBMIDECD.FLT <parameter>

Parameters

/V: Displays some information during the boot.
/C: IBMATAPI.FLT and IBMIDECD.FLT have been modified so that they no longer fill the request's S/G list with 0's for the commands without data transfer phase, even if the particular command contains a valid S/G list. To avoid possible unforeseen compatibility problems with older drivers, /C parameter disables this new behaviour.

Product Support
OS/2 1.3
OS/2 2.0
OS/2 2.1	C
OS/2 2.11 SMP	C
OS/2 Warp 3	S
OS/2 Warp Connect	S
OS/2 Warp 4	S
OS/2 Warp Server for e-Business	S

@@ Line 1: / Line 1: @@
+This filter driver makes your IDE CD-ROM drive visible to OS/2. Support for ATAPI CD-ROM drives attached to an IDE Port. Superseded by [[IBMATAPI.FLT]] Version 10.085.
 ==Version==
+{|class="wikitable"
-{| class="wikitable"
+!Date||Version||Size||Comments
+|-
+|1995-10-30||8.157||20,358 bytes||
+|-
+|1998-04-20||9.23||24,080 bytes||
 |-
-! Date !!Version !! Size  !! Comments
+| ||10.047|| ||IDE CD-RW support
 |-
-| 1-17-2003  14:52 || 10.095 || 24,652 bytes || Adapter Driver for ATAPI CD-ROMs.
+|2002-10-08||10.085||39,416 bytes||Extended Warm Swap Support
 |-
+|2003-01-17||10.095||24,652 bytes||
 |}
-==Config.sys Information==
+==CONFIG.SYS Information==
-[[The_Config.sys_Documentation_Project/BASEDEV_Statements#BASEDEV.3DIBMIDECD.FLT|IBMIDECD.FLT - The Config.sys Documentation Project]]
+This filter driver makes IDE CD-ROM drives visible to OS/2. Support for ATAPI CD-ROM drives attached to an IDE Port. Superseded by IBMATAPI.FLT V 10.085. It is important to use IBMIDECD.FLT with the IBM1S506.ADD driver. Since Ver. 10.047 IDE CD-Writers for reading/writing are supported.
+;Note: To get CD-ROM support in OS/2 you must also install IBM1S506.ADD and [[OS2CDROM.DMD]].
-==DLLs Loaded==
+ BASEDEV=IBMIDECD.FLT <parameter>
-* N/A
-==Alternatives==
-N/A
+===Parameters===
+;/V:Displays some information during the boot.
+;/C:IBMATAPI.FLT and IBMIDECD.FLT have been modified so that they no longer fill the request's S/G list with 0's for the commands without data transfer phase, even if the particular command contains a valid S/G list. To avoid possible unforeseen compatibility problems with older drivers, /C parameter disables this new behaviour.
+{{ProdS |V21=C|V22=C|V30=S|V31=S|V40=S|V45=S}}
-[[Category:Files]]
+[[Category:BASEDEV Statements]][[Category:Filter Device Drivers]]