NETBIND.EXE: Difference between revisions

Latest revision as of 02:53, 9 August 2023

NETBIND initiates the binding process based on information in PROTOCOL.INI.

The job of NETBIND.EXE is to make the protocol driver known to the MAC driver and vice versa so that these can exchange data.

Date	Version	Size	Comments
2004-05-21	60.58	13,753 bytes	WR_8708

This process binds the protocols to the adapter driver that the NDIS Protocol Manager (PROTMAN.OS2) tells it to.

RUN=\IBMCOM\PROTOCOL\NETBIND.EXE

CALL=\IBMCOM\PROTOCOL\NETBIND.EXE

@@ Line 1: / Line 1: @@
-This program binds the protocols to the adapter driver that the NDIS Protocol Manager ( Protman.os2 ) tells it to.
+NETBIND initiates the binding process based on information in PROTOCOL.INI.
+The job of NETBIND.EXE is to make the protocol driver known to the MAC driver and vice versa so that these can exchange data.
 ==Versions==
+{|class="wikitable"
+!Date||Version||Size||Comments
+|-
+|2004-05-21||60.58||13,753 bytes||WR_8708
+|}
+==CONFIG.SYS Parameters==
+This process binds the protocols to the adapter driver that the NDIS Protocol Manager ([[PROTMAN.OS2]]) tells it to.
+ RUN=\IBMCOM\PROTOCOL\NETBIND.EXE
+ CALL=\IBMCOM\PROTOCOL\NETBIND.EXE
+;NOTE: This program has no parameters.
-==Config.sys Parameters==
+{{ProdS |V31=S|V40=S|V45=S}}
-* [[The_Config.sys_Documentation_Project/CALL_Statements#CALL.3DNETBIND.EXE|NETBIND.EXE]]
-[[Category:Files]]
+[[Category:RUN Statements]][[Category:CALL Statements]]