|
|
| (208 intermediate revisions by 3 users not shown) |
| Line 1: |
Line 1: |
| [[The Config.sys Documentation Project|Return to The Config.sys Documentation Project Main Page]]
| | {{CFGProject}} |
| | Device Drivers are needed by OS/2 to work with your installed hardware. |
|
| |
|
| Device Drivers are needed by OS/2 to work with your installed hardware. The Device Drivers are loaded after the Base Device Drivers Unlike the Base Device Drivers, the Device Drivers are loaded in the order they appear in the config.sys file. The following pages describe these entries:
| | The Device Drivers are loaded after the Base Device Drivers. Unlike them the Device Drivers are loaded in the order they appear in the CONFIG.SYS file. |
|
| |
|
| =DEVICE=$ICPMOS2.SYS=
| | The following pages describe these entries: |
| Power Management Driver for PCMCIA
| |
|
| |
|
| DEVICE=$ICPMOS2.SYS
| | ==Chipset Support== |
| | ===PC Card/CardBus=== |
| | *[[$ICPMOS2.SYS]] - PC Card Power Management |
|
| |
|
| '''ATTENTION:''' Must be after all other listed drivers in the config.sys.
| | ===PCI=== |
| | *[[SPCIIRQ.SYS]] - PCI IRQ assignment |
|
| |
|
| '''Platform Support:'''
| | ===Power Management=== |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[APM.SYS]] - Advanced Power Management |
| |-
| | *[[APM_NH.SYS]] - APM NH |
| !OS/2 2.x
| | *[[OS2SPEED.SYS]] |
| !OS/2 3.0
| | *[[POWERSV.SYS]] |
| !OS/2 4.0
| | *[[RESUME.SYS]] - Toshiba OS/2 AutoResume |
| !OS/2 4.5x
| | *[[VIAAPM.SYS]] - VIA APM |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=ACCND.OS2= | | ===Processor=== |
| ACCTON EN1207D Series Ethernet PCI Adapter NDIS driver:
| | *[[CYRIX.SYS]] - Cyrix 486DLC internal cache. |
| http://www.accton.com/accton/products/adapters/en1207d_wol/base.html
| | *[[OS2OGL.SYS]] - Pentium Pro optimised Open GL. |
| Network card in IBM's netvista 6269N2G
| | *[[P6K7MTRR.SYS]] - MTRR setting |
| | *[[P6MTRR.SYS]] - MTRR setting |
| | *[[RDMSR.SYS]] |
|
| |
|
| DEVICE=ACCND.OS2
| | ==Storage== |
| | *[[ADSMSDIS.SYS]] |
| | *[[ADSMTAPE.SYS]] |
| | *[[ATOS2HC.SYS]] - HardCardII-XL card |
| | *[[ASPIPFA.SYS]] |
| | *[[ASPITAPE.SYS]] |
| | *[[CB2ASPI.SYS]] |
| | *[[CDBASPI.SYS]] - MSR Backmaster |
| | *[[CDMGRDRV.SYS]] - CD-ROM Manager |
| | *[[CDD.SYS]] |
| | *[[CMDLINE.SYS]] |
| | *[[DELIVERY.SYS]] |
| | *[[DRVOQ117.SYS]] - QIC-117 |
| | *[[EXT5DD.SYS]] - PS/2 External 5.25-Inch 1.2MB Diskette. |
| | *[[GENSCSI.SYS]] |
| | *[[IDEHDD.SYS]] |
| | *[[KBZIP100.SYS]] |
| | *[[NOVADRV.SYS]] - NovaStor |
| | *[[NOVASPI.SYS]] |
| | *[[OS2.SYS]] - Iomega OAD |
| | *[[OS2EASY.SYS]] - Altec Easy Drive |
| | *[[MEDIAOS2.SYS]] - Altec MediaDrive |
| | *[[PCMSSDIF.SYS]] |
| | *[[PTDVR.SYS]] - MSR Backmaster |
| | *[[RSJSCSI.SYS]] - RSJ |
| | *[[SDI_SCSI.SYS]] |
| | *[[SEAGB24.SYS]] - Sytos |
| | *[[SVDISK.SYS]] - Super Virtual Disk |
| | *[[TC15DVR.SYS]] - MSR Backmaster |
| | *[[TTDVR.SYS ]] - MSR Backmaster |
| | *[[VDISK.SYS]] |
| | *[[VFDISK.SYS]] |
| | *[[WKAA150W.SYS]] - Wangtek PC02 QIC 150Mb tape drive. |
|
| |
|
| '''Platform Support:'''
| | ==Network Adapters== |
| {| class="wikitable" style="text-align:center" border="1"
| | ===NDIS MAC=== |
| |-
| | *[[NULLNDIS.OS2]] - NULL NDIS |
| !OS/2 2.x
| | *[[ODI2NDI.SYS]] - Netware |
| !OS/2 3.0
| | *[[PMAC.OS2]] - SSW Parallel NDIS |
| !OS/2 4.0
| | *[[PRANDIS.OS2]] - Parallel Port NDIS |
| !OS/2 4.5x
| | *[[SVSNET.SYS]] - Serenity Virtual Net |
| !eCS 1.x
| | *[[SWITCH.OS2]] - Virtual PC for OS/2 Virtual Switch |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=ACECAD.SYS=
| | ;Arcnet |
| Driver for the ACECATIII digitizing board.
| | *MSARC.OS2 - Microsoft Arcnet |
| DEVICE=ACECAD.SYS
| | *SMC_ARC.OS2 - SMC ARCNET PS110, PC110-PC650 |
| for working DEVICE=E:\OS2\BOOT\MOUSE.SYS STYPE=ACECAD$ must be added
| | *TCCARC.OS2 - Thomas-Conrad Arcnet |
|
| |
|
| '''Platform Support:'''
| | ;DirecPC |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[BICDD.SYS]] - Hughes Network Systems DirecPC ISA Adapter |
| |-
| | *[[IBMNETA.OS2]] |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=AD1816DD.SYS=
| | ;Ethernet |
| Analog Devices AD1816 Soundport Driver
| | *[[ACCND.OS2]] - ACCTON EN1207D Series Ethernet PCI |
| | *AM2100.OS2 - AMD Series 2100 |
| | *[[ASNPCI.OS2]] - Asante Fast 10/100 PCI |
| | *B44A.OS2 - Broadcom BCM4401 |
| | *[[B57.OS2]] - Broadcom NetXtreme |
| | *[[CBENDIS.OS2]] - Xircom CardBus 10/100 |
| | *[[CE3NDIS.OS2]] - Xircom Ethernet 10/100 |
| | *COMETA.NIF - ADMtek Comet/Centaur |
| | *[[DC21X4.OS2]] - DEC/Intel DC21X4X |
| | *DE100.OS2 - D-Link DE-100 Ethernet Card |
| | *DE200.OS2 - D-Link DE-200 |
| | *DE220.OS2 - D-Link DE-220 |
| | *DE250.OS2 - D-Link DE-250 |
| | *DE300.OS2 - D-Link DE-300 Ethernet Card |
| | *[[DE305.OS2]] - DEC EtherWORKS ISA |
| | *DE320.OS2 - D-Link DE-320CT Ethernet Card |
| | *DE400.OS2 - D-Link DE-400 EISA |
| | *[[DE450.OS2]] - DEC EtherWORKS TURBO PCI |
| | *DE500.OS2 - D-Link DE-500 VESA Bus Master Ethernet Card |
| | *[[DE528.OS2]] - D-Link DE-528CT PCI |
| | *DE600.OS2 - D-Link DE-600 |
| | *DE620.OS2 - D-Link DE-620 Pocket LAN |
| | *DE65S.OS2 - D-Link DE-650 PCMCIA |
| | *DE660.OS2 - D-Link DE-660 PC Card |
| | *[[DEPCA.OS2]] - DEC EtherWORKS (LC, MC, EISA, Turbo) |
| | *[[DFE650.OS2]] - D-Link DFE-650 PC Card |
| | *[[DLKFET.OS2]] - D-Link DFE-530TX |
| | *[[DLKPCI.OS2]] - D-Link Fast Ethernet PCI |
| | *[[DLKRTS.OS2]] - D-Link DFE-530TX+ |
| | *[[DM9PCI.OS2]] - Davicom DM9xxx PCI |
| | *DP815A.OS2 - NSC DP83815 |
| | *[[DP820A.SYS]] - NS DP83820 |
| | *[[DP83815.OS2]] - NS DP83815 |
| | *[[DP83820.OS2]] - NS DP83820 Gigabit |
| | *[[E1000.OS2]] - Intel PRO/1000 |
| | *[[E100B.OS2]] - Intel EtherExpress PRO/100 |
| | *[[E10P.OS2]] - Intel EtherExpress PRO/10 PCI |
| | *[[E11ND.OS2]] - Cabletron E11 Ethernet Adapter |
| | *E20NDIS.OS2 - Cabletron E2010 |
| | *[[E21ND.OS2]] - Cabletron E21 Ethernet Adapter |
| | *[[E22ND.OS2]] - Cabletron E22 Ethernet |
| | *E31ND.OS2 - Cabletron E31 Ethernet Adapter |
| | *[[EC2T.OS2]] - Linksys Combo PCMCIA |
| | *ED586.OS2 - Eden ED586/32 |
| | *[[EL515.OS2]] - 3Com Fast EtherLink ISA |
| | *[[EL59X.OS2]] - 3Com EtherLink PCI |
| | *[[EL90X.OS2]] - 3Com Fast EtherLink XL |
| | *[[ELNK.OS2]] - 3Com EtherLink |
| | *[[ELNK16.OS2]] - 3Com EtherLink 16 (3c507) |
| | *[[ELNK3.OS2]] - 3Com EtherLink III |
| | *[[ELNKII.OS2]] - 3Com EtherLink II (3c503) |
| | *[[ELNKMC.OS2]] - 3Com EtherLink/MC (3c523) |
| | *[[ELNKPL.OS2]] - 3Com EtherLink Plus (3C505) |
| | *[[ELPC3.OS2]] - 3Com 3C589 EtherLink III |
| | *[[EN5251.OS2]] - Accton EN5251 |
| | *[[ENDS2ISA.OS2]] - Crystal CS89x0 |
| | *ENET.OS2 - Compex ENET Ethernet |
| | *[[EP325.OS2]] - Surecom EP-325 |
| | *[[EP427.OS2]] - SureCom EP-427 |
| | *[[EPRO.OS2]] - Intel EtherExpress PRO/10 |
| | *ES3210.OS2 - Racal-Datacom ES3210 EISA |
| | *[[ET32ND.OS2]] - KTI PCI Ethernet |
| | *ETHIIE.OS2 - ICL EtherTeam 16 |
| | *ETHNE.OS2 - Accton EtherCoax 16N |
| | *[[ETHPCI.OS2]] - Accton EN1207 |
| | *[[EXP16.OS2]] - Intel EtherExpress 16 |
| | *EXP32.OS2 - Intel EtherExpress/32 |
| | *[[FASTNIC.OS2]] - PCI 10/100 Fast Ethernet Adapter |
| | *[[FETND.OS2]] - VIA Fast Ethernet |
| | *HLS6130.OS2 - Hughes LAN Systems HLS-6130 |
| | *HPLAN.OS2 - Hewlett Packard Ethertwist/MC |
| | *HPLANB.OS2 - Hewlett Packard Ethertwist |
| | *HPLANE.OS2 - Hewlett Packard Ethertwist EISA LAN Adapter/32 |
| | *HPLANP.OS2 - Hewlett Packard PC LAN Adapter/16+ |
| | *I82593.OS2 - Intel 82593 Motherboard LAN Module |
| | *IBMEANDI.OS2 - IBM PCI Ethernet Adapter Driver |
| | *IBMEINDI.OS2 - IBM EtherJet ISA Ethernet Adapter |
| | *[[IBMENI.OS2]] - IBM LAN Adapter for Ethernet |
| | *[[IBMENII.OS2]] - IBM LAN Adapter/A for Ethernet |
| | *IBMESAN2.OS2 - IBM EISA Ethernet Adapter |
| | *IBMEXNDI.OS2 - IBM EtherJet PC Card Ethernet Adapter |
| | *[[IBMFE.OS2]] - IBM 10/100 EtherJet PCI |
| | *IBMGC.OS2 - IBM 1000BaseT Gigabit Ethernet Adapter |
| | *[[IBMGE.OS2]] - IBM 1000BaseSX Gigabit Ethernet |
| | *IBMGU.OS2 - IBM Gigabit Ethernet Adapter |
| | *[[KTC110.OS2]] - Kingston EtheRx |
| | *[[KTC111.OS2]] - Kingston Fast EtheRx KNE111TX |
| | *[[KTC120.OS2]] - Kingston EtheRx |
| | *[[KTC40.OS2]] - Kingston EtheRx PCI |
| | *[[L100.OS2]] - PNIC |
| | *[[LNEPCI.OS2]] - Linksys LNE100TX |
| | *[[LNE100.OS2]] - Linksys LNE100TX v4 |
| | *MAC586.OS2 - DCA/10NET |
| | *MACETH.OS2 - IBM PS/2 Adapter for Ethernet Networks |
| | *MACEVX.OS2 - Everex SpeedLink EV2026/EV2027 |
| | *MACWD.OS2 - Western Digital EtherCard Plus |
| | *[[MCS7830.OS2]] - Moschip MCS7830 |
| | *[[MMLEM.OS2]] - Intel® PRO/1000 Legacy NIC Driver |
| | *[[MXNICF.OS2]] - Macronix MX987xx |
| | *[[N100.OS2]] - Compaq Fast Ethernet |
| | *NCC16.OS2 - Tulip NCC-16 |
| | *[[NE1000.OS2]] - Novell NE1000 |
| | *[[NE2000.OS2]] - Novell NE2000 |
| | *NE3200.OS2 - Novell NE3200 |
| | *[[NETFLX3.OS2]] - Compaq NetFlex-3/Netelligent |
| | *NI5210.OS2 - Racal-Datacom NI5210 |
| | *NI6510.OS2 - Racal-Datacom NI6510 |
| | *NI9210.OS2 - Racal-Datacom NI9210 |
| | *NSEISA.OS2 - National Semiconductor SONIC EISA |
| | *[[PC100.OS2]] - Linksys EtherFast 10/100 PC Card |
| | *[[PCIND.OS2]] - Realtek RTL8029 PCI |
| | *[[PCMNICCS.OS2]] - IBM Ethernet Adapter PCMCIA |
| | *[[PCNTND.OS2]] - AMD PCNet |
| | *PDIETH.OS2 - PureData PDI8023 |
| | *[[PNPND.OS2]] - Realtek RTL8019 ISA PnP |
| | *RCE.OS2 - RCE 10Base-T 8-/16-Bit |
| | *RMATETH.OS2 - Research Machines Ethernet |
| | *RMMCETH.OS2 - Research Machines Ethernet MC |
| | *[[RTFND.OS2]] - Realtek RTL8129 PCI Fast Ethernet |
| | *[[RTGNDA.OS2]] - Realtek RTL8168 Gigabit |
| | *RTL09.OS2 - Realtek RTL8009 ISA Ethernet Adapter |
| | *[[RTSND.OS2]] - Realtek RTL8139 |
| | *[[SIS900.OS2]] - SiS 900/7016 |
| | *SK98ND.OS2 - SysKonnect SK-9E21D, SK-9521 |
| | *[[SMC1208.OS2]] - SMC EZ PCI |
| | *SMC3016 - SMC 3016 Series |
| | *[[SMC8000.OS2]] - SMC 8xxx |
| | *[[SMC9432.OS2]] - SMC EtherPower II |
| | *SMCMAC.OS2 - SMC EtherCard PLUS ELITE Series |
| | *[[SMCND.OS2]] - SMC 1211TX |
| | *[[SMCPWR.OS2]] - SMC EtherPower |
| | *SPIDER.OS2 - Spider Systems |
| | *[[TC902X.OS2]] - Tamarack TC9021 |
| | *TNDIS.OS2 - Tiara EtherStar LanCard/E |
| | *TSBETHER.OS2 - ToshibaLAN Internal |
| | *UBNEI.OS2 - Ungermann-Bass PCNIU |
| | *[[USBETHR.OS2]] - Kawasaki USB Ethernet 10Mbit |
| | *[[VGEND2.OS2]] - VIA VT612x Velocity |
| | *[[W840ND.OS2]] - Winbond W89C840 |
| | *[[W940ND.OS2]] - Winbond W89C940 |
| | *[[XCEMNDIS.OS2]] - Xircom CEM56-100 |
| | *[[ZX312.SYS]] - ZNYX ZX312 EtherAction |
|
| |
|
| DEVICE=AD1816DD.SYS
| | ;FDDI |
| | *AT_LM.OS2 - Network Peripherals NP-AT |
| | *[[DEFEA.OS2]] - DEC FDDIcontroller/EISA |
| | *[[DEFPA.OS2]] - DEC FDDIcontroller/PCI |
| | *DF300.OS2 - D-Link DF300 |
| | *DF400.OS2 - D-Link DF400 |
| | *EISA_LM.OS2 - Network Peripherals NP-EISA |
| | *FDDILINK.OS2 - 3Com FDDILink |
| | *FLINK.OS2 - 3Com FDDILink PCI |
| | *[[IBMFDX.OS2]] - IBM FDDI FI Adapter |
| | *SKFE.OS2 - SK-NET FDDI EISA |
| | *SKFI.OS2 - SK-NET FDDI ISA |
| | *SKFM.OS2 - SK-NET FDDI MCA |
| | *SKFPNO.OS2 - SK-NET FDDI PCI |
|
| |
|
| '''Parameter:'''
| | ;Infrared |
| * /N:$strng$ | | *[[IRDANDIS.OS2]] - IrDA |
| Device driver name assigned by MINSTALL
| | *[[IRDNDIS.OS2]] - Infrared NDIS |
| * /3:y | |
| 3D Phase expansion (0-31)
| |
|
| |
|
| '''NOTE:''' The Aztech SC16-3D sound card has an Analog Devices AD1816 chip whose drivers should work, in theory. The problem is that this card does not report itself as a standard AD1816 based board, so even though the PnP-Manager correctly initializes the card, the
| | ;Intelligent Boards |
| driver can neither recognize the board nor pick up the IRQ, I/O, and DMA values from the PnP-Manager. Martin Schaffoener (martin.schaffoener@student.uni-magdeburg.de) patched the driver so it will work also with this card. Search for azsc163d.zip
| | *[[DGAFGP.OS2]] - DigiBoard |
|
| |
|
| =DEVICE=ADSMSDIS.SYS=
| | ;ScaNet |
| Personally Safe n Sound tape backup driver that from Warp Server for E-Business
| | *[[PC04.OS2]] - ScaNet x104/05 |
|
| |
|
| DEVICE=ADSMSDIS.SYS
| | ;Token-Ring |
| | *CPQTOK.OS2 - Compaq Token Ring Adapter |
| | *DLKTOK.OS2 - D-Link DT-650 |
| | *DT620.OS2 - D-Link DT-620 |
| | *[[EISANDIS.OS2]] - Racore EISA TR |
| | *[[IBM16TR.OS2]] - IBM Token-Ring Network 16/4 Adapter II |
| | *IBMEITR.OS2 - IBM 16/4 Busmaster EISA Adapter |
| | *[[IBMMPC.OS2]] - IBM Auto LANStreamer PCI |
| | *[[IBMTOK.OS2]] - IBM Token-Ring |
| | *IBMTOKCS.OS2 - IBM Turbo 16/4 Token-Ring PC Card |
| | *IBMTOKMP.OS2 - IBM SMP Token-Ring |
| | *IBMTRBM.OS2 - IBM Token-Ring Bus Master |
| | *[[IBMTRP.OS2]] - IBM Token-Ring PCI |
| | *INTEL16.OS2 - Intel TokenExpress 16/4 |
| | *INTEL32.OS2 - Intel TokenExpress EISA/32 |
| | *MDGND.OS2 - Madge |
| | *NCRTRN.OS2 - NCR Token-Ring Adapter |
| | *OLITOK.OS2 - Olicom, Intel TokenExpress |
| | *OLITOK16.OS2 - Olicom Token-Ring Network 16/4 Adapter |
| | *[[RESETOKN.SYS]] - Reset the token-ring card before startup the LSP drivers |
| | *[[RCPTRNDS.OS2]] - Racore Preferred Token Ring |
| | *[[RTR16NDIS.OS2]] - Racore 16/4 Token-Ring Adapter |
| | *SMARTND.OS2 - Madge Networks Smart 16/4 |
| | *SMC8100.OS2 - SMC TokenCard EliteSeries |
| | *[[SMC8332.OS2]] - SMC TokenCard Elite Master32 |
| | *T20NDIS.OS2 - Cabletron T2015 4/16 Mbps DNI |
| | *T30NDIS.OS2 - Cabletron T3015 4/16 Mbps DNI |
| | *TCCTOK.OS2 - Thomas-Conrad Token Ring |
| | *TL3C3X9.OS2 - 3Com TokenLink PCI |
| | *TLNK.OS2 - 3Com TokenLink (3C603) |
| | *[[TLPC3.OS2]] - 3Com TokenLink PCCard |
| | *TOKWD.OS2 - Western Digital TokenCard WD8005/WD8015 |
| | *[[TR2KNDIS.OS2]] - Texas Instruments TokenLite |
|
| |
|
| '''Platform Support:'''
| | ;VG AnyLAN |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[HPFEND.OS2]] - HP DeskDirect 10/100 |
| |-
| | *[[RVGNDIS.OS2]] - Racore 10/100 AnyLAN |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=ADSMTAPE.SYS=
| | ;Wireless |
| Personally Safe n Sound tape backup driver that from Warp Server for E-Business.
| | *[[AIRO340.SYS]] - Cisco Systems 340 Series Wireless |
| | *[[ARLTNDIS.OS2]] - ARtem Onair ComCard 11 PCCard |
| | *[[BIXANDIS.OS2]] - BinTec XAIR |
| | *IBMPRISM.OS2 - IBM miniPCI PRISM 2.5 Wireless Card |
| | *IBMWIFI2.OS2 - IBM High Rate Wireless LAN PC Card-128 |
| | *[[IRMAC.OS2]] |
| | *WAVELAN.OS2 - NCR WaveLAN AT & MC |
|
| |
|
| DEVICE=ADSMTAPE.SYS
| | ===NDIS Protocols=== |
| | *[[AFINET.SYS]] - NDIS Internet Protocol |
| | *[[AFINETK.SYS]] |
| | *[[AFLEAN.SYS]] |
| | *[[AFNB.SYS]] - NetBIOS protocol driver |
| | *[[AFOS2.SYS]] - Local IPC |
| | *[[ATALK.SYS]] - Appletalk |
| | *[[ATKP.SYS]] - Appletalk PAP |
| | *[[CDMF.SYS]] - Commerical Data Masking Facility |
| | *[[DES.SYS]] - Encryption |
| | *[[ETALK.SYS]] - Appletalk protocol stack driver |
| | *[[FWIP.SYS]] - Firewall built into IBM TCP/IP 4.1 and above. |
| | *[[INET.SYS]] |
| | *[[IPSEC.SYS]] |
| | *[[KDBNET.SYS]] - Kernel debug |
| | *[[LANDD.OS2]] - IBM IEEE 802.2 |
| | *[[LANDD.SYS]] |
| | *[[LANDLLDD.OS2]] - IBM IEEE 802.2 low level |
| | *[[LANDLLDD.SYS]] |
| | *[[LANPDD.OS2]] |
| | *[[LANPDD.SYS]] |
| | *[[LANVDD.OS2]] |
| | *[[LANVMEM.SYS]] - Memory allocation for MVDMs |
| | *[[MD5.SYS]] |
| | *[[NETBEUI.OS2]] - IBM OS/2 NETBIOS |
| | *[[NETBIOS.OS2]] - NetBIOS |
| | *[[NETBIOS.SYS]] |
| | *[[ODI2NDI.OS2]] - IBM NetWare Requester support |
| | *[[SOCKETS.SYS]] - Common Transport Sockets |
| | *[[SOCKETSK.SYS]] - Common Transport Sockets |
| | *[[TCPBEUI.OS2]] - NETBIOS over TCP |
|
| |
|
| '''Platform Support:'''
| | ===NetWare Requester=== |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[IPX.SYS]] - IPX protocol |
| |-
| | *LANSUP.SYS |
| !OS/2 2.x
| | *[[LSL.SYS]] - Link Support Layer |
| !OS/2 3.0
| | *[[NETBIOS.SYS]] - NetBIOS |
| !OS/2 4.0
| | *[[NMPIPE.SYS]] - Named Pipes |
| !OS/2 4.5x
| | *[[NPSERVER.SYS]] - Named Pipes server |
| !eCS 1.x
| | *[[NWREQ.SYS]] - requester module |
| !eCs 2.x
| | *[[ROUTE.SYS]] - source routing |
| |-
| | *[[SPX.SYS]] - SPX protocol |
| |No
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| DEVICE AFINET.SYS
| | LAN interfaces for ARCNET |
| Part of the TCP/IP Protocol Drivers.
| | *RXNET_AT.SYS - SMC PS110, Novell RX-Net |
| | *RXNET_MC.SYS - Novell RX-Net/MC |
| | *TRXNET.SYS |
| | *TRXNET2.SYS |
|
| |
|
| DEVICE=C:\Mptn\Potocol\Afinet.sys
| | LAN interfaces for Ethernet |
| | *3C501.SYS - 3Com EtherLink 3C501 |
| | *3C503.SYS - 3Com EtherLink 3C503 |
| | *3C505.SYS - 3Com EtherLink 3C505 |
| | *3C523.SYS - 3Com EtherLink/MC 3C523 |
| | *E3C501.SYS - 3Com EtherLink 3C501 |
| | *NE1000.SYS - Novell NE1000 |
| | *NE2000.SYS - Novell NE2000 |
| | *NE2.SYS - Novell NE/2 |
| | *NE2-32.SYS |
| | *WD.SYS - Western Digital 8003E. 8003EP, 8013EB, 8013EP/A, 8013W, 8013EW, 8013WP/A |
|
| |
|
| '''Platform Support:'''
| | LAN interfaces for PC Network |
| {| class="wikitable" style="text-align:center" border="1"
| | *PCN2_AT.SYS - IBM PC Network Adapter |
| |-
| | *PCN2_MC.SYS - IBM PC Network Adapter/A |
| !OS/2 2.x
| | *PCN2.SYS |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=AFINETK.SYS=
| | LAN interfaces for Token-Ring |
| 32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak13 for Warp 4
| | *TOKEN.SYS - IBM Token-Ring adapters |
| Part of the TCP/IP Ver. 4.x firewall
| | *TOKENEE.SYS or CMGRLAN.SYS |
|
| |
|
| DEVICE=AFINETK.SYS
| | ===ODI=== |
| | *[[CBEODI.OS2]] - Xircom CardBus |
| | *[[CPQNF3.SYS]] - Compaq NETFLEX-3 |
| | *GEAT2ODI.SYS - G/Ethernet 16-bit AT adapter |
| | *GEMC20DI.SYS - G/Ethernet Microchannel adapter |
| | *[[NTR2000.SYS]] - Novell NTR2000 |
| | *OS2MLID.SYS - Accton Ethernet |
| | *[[PCIOS2.SYS]] - Realtek RTL8029 |
| | *[[RTSOS2.SYS]] - Realtek RTL8139 |
| | *[[SMC8000.SYS]] - SMC/WD EtherCard |
| | *TROPODI.SYS - Accton RingPair-4/16T |
| | *TRPKTODI.SYS - Accton RingPocket |
| | *[[XCEMODI.OS2]] - Xircom CEM56-100 |
|
| |
|
| '''Parameter:'''
| | ==Communications== |
| * /V | | *[[APEXDFM1.OS2]] - Apex PCMCIA modem. |
| Verbose, shows version-number
| | *[[ASP.SYS]] - ARNET SmartPort Plus. |
| | *[[CD1400.SYS]] - RISC COM CD1400. |
| | *[[COM01A.SYS]] - AST 4-port. |
| | *[[COM02.SYS]] |
| | *[[DGX.SYS]] - DigiBoard |
| | *[[DTSXPC01.SYS]] |
| | *[[DSP100.SYS]] - Quatech DSP-100 PCMCIA Dual RS-232 serial port. |
| | *[[DSP200.SYS]] - Quatech DSP-200/300 PCMCIA Dual RS-422/RS-485 serial port. |
| | *[[DUNTLW01.SYS]] |
| | *[[ECRDRV.SYS]] - Remote Support. |
| | *[[ESP.SYS]] - SIO2K Hayes ESP card support. |
| | *[[FMD.SYS]] - Faxworks. |
| | *[[GPIB.SYS]] - National Instruments Corp NI-488.2M. |
| | *[[ICARICIO.SYS]] - IBM Realtime Interface Co-Processor OS/2 Support. |
| | *[[IBMCOMO.SYS]] - Advanced System Mangement. |
| | *[[LTMDMOS2.SYS]] - Lucent modem. |
| | *[[PCCOM2.SYS]], [[PCCOM4.SYS]], [[PCCOM8.SYS]] |
| | *[[PSCOM.SYS]] |
| | *[[QCOM.SYS]] - Quatech PCI, ISA. |
| | *[[QSP100.SYS]] - Quatech QSP-100 PCMCIA Quad RS-232 Serial Port driver. |
| | *[[QSP200.SYS]] - Quatech QSP-200/300 Four Channel Asynchronous RS-422/485 PCMCIA Adapter driver. |
| | *[[QVCOM.SYS]] |
| | *[[SSCOMA1.SYS]] |
| | *[[UART.SYS]] - SIO2K service driver. |
| | *[[XALL.SYS]] - DigiCHANNEL. |
|
| |
|
| '''Platform Support:'''
| | ==Input Devices== |
| {| class="wikitable" style="text-align:center" border="1"
| | ===Gameport=== |
| |-
| | *[[ASP4JOY.SYS]] - Vortex AU8820 |
| !OS/2 2.x
| | *[[GAMEDD.SYS]] |
| !OS/2 3.0
| | *[[GAMEPORT.SYS]] |
| !OS/2 4.0
| | *[[GAMEPRT2.SYS]] |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes-FP13
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=AFNB.SYS= | | ===Keyboard=== |
| Basic-NetBIOS-Socket-Support Driver.
| | *[[PCKBD.SYS]] - Process Commander Keyboard |
| | *[[KEYPAD.SYS]] - Screen Reader Keypad |
|
| |
|
| DEVICE=AFNB.SYS
| | ===Pointer Devices=== |
| | ;Mouse |
| | *[[AMOUSE.SYS]] - Wheel mouse |
| | *[[MOUSE.SYS]] - pointing device |
| | *[[MOUSE2.SYS]] - ThinkPad TrackPoint |
| | *[[MSPS201.SYS]] - Toshiba |
| | *[[PMDD.SYS]] |
| | *[[RODENT.SYS]] - Rodent |
| | *[[XMOUSE.SYS]] - Enhanced mouse |
| | *[[XSMOUSE.SYS]] - Mouse driver for touch |
| | ;Pen |
| | *[[ACECAD.SYS]] - ACECAT III digitiser |
| | *[[APPOINT.SYS]] - Kurta PenMouse |
| | *[[ARTPAD.SYS]] - Wacom Artpad |
| | *[[ARTZ.SYS]] - Wacom UD-0608 |
| | *[[DAUPHIN.SYS]] - Dauphin DTR-1 pen |
| | *[[EIQ02.SYS]] |
| | *[[EMI.SYS]] - Pen for OS/2 mouse emulation |
| | *[[CONCERTO.SYS]] - Compaq Concerto Pen |
| | *[[GLIFFIC.SYS]] - Gliffic Plus Mouse/Pen Set |
| | *[[GRAPHIRE.SYS]] - Wacom Graphire |
| | *[[GRID.SYS]] - GRiD Gauntlet |
| | *[[IBM360P.SYS]] - ThinkPad 360P |
| | *[[IBM710T.SYS]] - ThinkPad 710T |
| | *[[IBM730T.SYS]] - ThinkPad 730T |
| | *[[IBM750P.SYS]] - ThinkPad 750P |
| | *[[PENCC.SYS]] - Calcomp Pen |
| | *[[PENDD.SYS]] - Wacom IV/V |
| | *[[SUMMA.SYS]] - Summa MM1201 |
| | ;Touchscreen |
| | *[[IBMTOU01.SYS]] |
| | *[[IBMTOU02.SYS]] |
| | *[[PDITOU01.SYS]] |
| | *[[PDITOU02.SYS]] |
| | *[[MONMOU01.SYS]] |
| | *[[MONMOU02.SYS]] |
| | *[[MONMOU03.SYS]] |
|
| |
|
| '''Platform Support:'''
| | ===Scanner & Camera=== |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[GENIUS.SYS]] - Genius Hand Scanner |
| |-
| | *[[QCAMM.SYS]] - Connectix Quickcam |
| !OS/2 2.x
| | *[[QUICKCAM.SYS]] |
| !OS/2 3.0
| | *[[SCANHP1.SYS]] - Danmar HP SCSI |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=AFOS2.SYS= | | ==Multimedia Devices== |
| Part of the TCP/IP Protocol Drivers
| | ===Audio Adapter=== |
| | *[[AD1816DD.SYS]] - AD1816 SoundPort |
| | *[[ADSHDD.SYS]] - Audio stream handler |
| | *[[ALC.SYS]] - Realtek ALC AC97 |
| | *[[ASP4CORE.SYS]] - Vortex AU8820 Core |
| | *[[ASP4OS2.SYS]] - Vortex AU8820 MMPM/2 |
| | *[[BUSAUDIO.SYS]] - Business Audio |
| | *[[CCSINIT.SYS]] - ChipChat Sound Initializer |
| | *[[CLICHOS2.SYS]] - Crystal Semiconductor CS4299 AC97 |
| | *[[CMPCI16.SYS]] - C-Media CMI8738 |
| | *[[CMPCI32.SYS]] - C-Media CMI8738 |
| | *[[CT5880.SYS]] - Creative Ensoniq 5880 |
| | *[[CS4231.SYS]] - Crystal 4231 chipset (IBM ThinkPad 750C) |
| | *[[CWAUDIO.SYS]] - Crystal CS423x |
| | *[[CWGUTIL.SYS]] - Crystal DSP manager |
| | *[[CWMPU401.SYS]] - Crystal MPU401 |
| | *[[DTAUD.SYS]] - DTAudio driver |
| | *[[ES1371.SYS]] - Ensoniq ES1371 |
| | *[[ES1488DD.SYS]] - ESS ES1488 audio chip |
| | *[[ES1688DD.SYS]] - ESS ES1688 |
| | *[[ES198X.SYS]] - ESS Allegro Card (ES1989) and ESS PCI 198x (Maestro-3) |
| | *[[ES688DD.SYS]] - ESS ES688 Audio |
| | *[[GUSDD.SYS]] - Gravis Ultrasound (UltiMOD) |
| | *[[GUSNDPD.SYS]] |
| | *[[ICHCSND.SYS]] - Analog Devices SoundMax AD188x/198x |
| | *[[INIT931.SYS]] - OPTi 82C931 Init |
| | *[[JAZZDD.SYS]] - MediaVision Jazz-16 |
| | *[[MAD16.SYS]] |
| | *[[MAESTRO2.SYS]] - ESS 198x PCI AudioDrive |
| | *[[MPU401.SYS]] - MPU401 interface |
| | *[[MPU401DD.SYS]] - MidiLab/2 Device Driver |
| | *[[MVPRODD.SYS]] - ProAudio Spectrum |
| | *[[OPL4D.SYS]] - OPL4 |
| | *[[PARADISE.SYS]] - Paradise mixer for Crystal CS423x |
| | *[[SB16D2.SYS]] - SoundBlaster 16 |
| | *[[SBAWED2.SYS]] - SoundBlaster AWE32 |
| | *[[SBD2.SYS]] - SoundBlaster 2.0 |
| | *[[SBLIVE16.SYS]] - Soundblaster Live |
| | *[[SBLIVE32.SYS]] - Soundblaster Live |
| | *[[SBP2D2.SYS]] - Sound Blaster Pro (OPL3) |
| | *[[SBPD2.SYS]] - Sound Blaster Pro (OPL2) |
| | *[[SBPW2.SYS]] - SB PRO Wave-Only (aka K12) |
| | *[[SBW2.SYS]] - Sound Blaster Wave-Only (aka K12) |
| | *[[SNDSCAPE.SYS]] - Ensoniq Soundscape |
| | *[[SPKRDD.SYS]] - PC speaker |
| | *[[SOLO.SYS]] - ESS Solo1 |
| | *[[ULTRADD.SYS]] - Gravis UltraSound |
| | *[[UNIAUD16.SYS]] - Uniaud |
| | *[[UNIAUD32.SYS]] - Uniaud |
| | *[[VIAUDD.SYS]] - VIA |
| | *[[YMF724.SYS]] - Yamaha YMF724 (DS-1) PCI |
|
| |
|
| DEVICE=C:\Mptn\Potocol\Afos2.sys
| | ===Radio FM=== |
| | *[[FMRADIO.SYS]] - PM Radio |
| | *[[TURNON.SYS]] |
|
| |
|
| '''Parameter:'''
| | ===Video/TV Adapter=== |
| * /V | | *[[AF9015.SYS]] - EmperoarTV TV Tuner drivers. |
| Verbose, shows version-number
| | *[[BT32.SYS]] - Bt878 PCI TV adapter |
| | *[[HIGHQ.SYS]] |
| | *[[IVAC.SYS]] |
| | *[[LXAPI32.SYS]] - common linux services driver |
| | *[[NOVA.SYS]] |
| | *[[T2.SYS]] |
| | *[[WCAST.SYS]] - Hauppauge WinTV PCI |
|
| |
|
| '''Platform Support:'''
| | ==USB== |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[GPH2USB.SYS]] - GPhoto/2 |
| |-
| | *[[USBAUDIO.SYS]] - USB Audio |
| !OS/2 2.x
| | *[[USBCOM.SYS]] - USB communication |
| !OS/2 3.0
| | *[[USBDCF.SYS]] - USB GUDE Expert Mouse CLOCK |
| !OS/2 4.0
| | *[[USBECD.SYS]] - USB Enhanced Control |
| !OS/2 4.5x
| | *[[USBKBD.SYS]] - USB Keyboard |
| !eCS 1.x
| | *[[USBMOUSE.SYS]] - USB Mouse |
| !eCs 2.x
| | *[[USBPRT.SYS]] - USB Printer |
| |-
| | *[[USBRESMG.SYS]] - USB Resource Manager |
| |No
| | *[[USBSCAN.SYS]] - USB Scanner |
| |Yes
| | *[[USBQSER.SYS]] - USB serial |
| |Yes
| | *[[USBSER.SYS]] - USB serial |
| |Yes
| | *[[USBWCM.SYS]] - Wacom Tablets |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| =DEVICE=AIRO340.SYS= | | ==Virtualisation== |
| Cisco Systems 340 Series Wireless Lan Adapter.
| | ===MDOS VDD=== |
| | *[[ANSI.SYS]] - ANSI support |
| | *[[VAPM.SYS]] - Advanced Power Management |
| | *[[VASPI.SYS]] - ASPI |
| | *[[VBIOS.SYS]] - BIOS |
| | *[[VCDROM.SYS]] - CD-ROM drives |
| | *[[VCMOS.SYS]] - CMOS |
| | *[[VDMA.SYS]] - VDMA |
| | *[[VDPMI.SYS]] - DOS Protected Mode Interface memory support |
| | *[[VDPX.SYS]] - Provides DOS Protected Mode Interface memory support |
| | *[[VEMM.SYS]] - EMS |
| | *[[VMANWIN.SYS]] |
| | *[[VNPX.SYS]] |
| | *[[VPICPARM.SYS]] - PIC IRQ9 |
| | *[[VPRPMI.SYS]] |
| | *[[VWIN.SYS]] - Windows |
| | *[[VW32S.SYS]] - Support for the Win32s APIs under Win-OS/2 |
| | *[[VXMS.SYS]] - XMS support |
| | ;Graphics |
| | *[[V8514A.SYS]] - IBM 8514/A |
| | *[[VCGA.SYS]] - Colour graphic adapter |
| | *[[VEGA.SYS]] - EGA |
| | *[[VMGAX64.SYS]] - Matrox |
| | *[[VMONO.SYS]] - Monochrome display adapter |
| | *[[VP9100.SYS]] - Weitek |
| | *[[VP91VGA.SYS]] |
| | *[[VSVGA.SYS]] - DOS SVGA support |
| | *[[VVGA.SYS]] - VGA |
| | *[[VXGA.SYS]] - XGA |
| | ;Audio |
| | *[[ASP4VDD.SYS]] - Vortex AU8820 |
| | *[[AUDIOVDD.SYS]] - Audio device drivers |
| | *[[VAUDDRV.SYS]] - Audio for ESS |
| | *[[VGENAUD.SYS]] - Generic Win-OS/2 Audio |
| | ;LAN |
| | *[[INT61VDD.SYS]] - PC/TCP sockets |
| | *[[LANVDD.SYS]] - DOS LAN Manager |
| | *[[VSHELL.SYS]] - Netware network shell |
| | ;Communications |
| | *[[VHAPI.OS2]] - Virtual HLLAPI |
| | *[[VMODEM.SYS]] - Ray Gwinn's Virtual Modem. |
| | *[[VSIO.SYS]] |
| | *[[VSIO2K.SYS]] - VCOM.SYS replacement |
| | *[[VX00.SYS]] - Fossil |
| | ;Misc |
| | *[[CPPVDD.SYS]] - CPU Monitor Plus |
| | *[[GAMEVDD.SYS]] - Joystick port |
| | *[[V2GB.SYS]] - 2GB limit for DOS installers |
| | *[[VCADCMDR.SYS]] |
| | *[[VCOMPAT.SYS]] - Compatibility patch |
| | *[[VLFNMEM.SYS]] |
| | *[[VMPU401.SYS]] - MPU401 |
|
| |
|
| DEVICE=AIRO340.SYS
| | ===Virtual PC=== |
| | *[[VMDRV.SYS]] - OS/2 guest additions |
| | *[[VMMOUSE.SYS]] - pointer device integration |
| | *[[VMVDD.SYS]] |
| | *[[VPCAPP.SYS]] - host |
|
| |
|
| '''Platform Support:'''
| | ===VirtualBox=== |
| {| class="wikitable" style="text-align:center" border="1"
| | *[[VBOXGUEST.SYS]] - guest support |
| |-
| | *[[VBOXMOUSE.SYS]] - pointer device integration |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| | ==Others== |
| | *[[CALL_EXE.SYS]] - run executable program |
| | *[[CRYP2X.SYS]] - ERACOM PCVault |
| | *[[DCF77.SYS]] - DCF77 radio control clock |
| | *[[DELAY.SYS]] |
| | *[[DTA.SYS]] |
| | *[[ELSA.SYS]] |
| | *[[EXCPHEAD.SYS]] |
| | *[[GWDTA.SYS]] |
| | *[[HRTIMER.SYS]] - high resolution timer |
| | *[[IAS_DD.OS2]] - IrDA IAS |
| | *[[IBMCSFLK.SYS]] |
| | *[[IBMLANLK.SYS]] |
| | *[[IRDA_DD.OS2]] |
| | *[[IRDA_PHY.OS2]] |
| | *[[KILLER.SYS]] - WatchCat |
| | *[[LDCOPY.SYS]] |
| | *[[LOCATECD.SYS]] |
| | *[[LPT49.SYS]] |
| | *[[OS20MEMU.SYS]] |
| | *[[PANEL.SYS]] |
| | *[[PAUSE.SYS]] |
| | *[[SDDHELP.SYS]] - Scitech helper |
| | *[[SESDD32.SYS]] - Security |
| | *[[SWD1.SYS]] - Super WatchDog |
| | *[[SYSINFO.SYS]] |
| | *[[SYSIOS2.SYS]] - System information |
| | *[[THESEUS2.SYS]] |
| | *[[UPSMON.SYS]] |
| | *[[USLGENIO.SYS]] |
| | *[[WARPDRVR.SYS]] |
| | *[[WATCHCAT.SYS]] - WatchCat |
| | *[[WATCHCRD.SYS]] - WatchCard |
| | *[[WCPCI.SYS]] - WatchCard PCI |
| | *[[WIN32K.SYS]] - Odin Ring-0 |
|
| |
|
| =DEVICE=ALC.SYS= | | ==See also== |
| ALC* AC97 Audio Codec OS/2 Device Driver.
| | *[[CONFIG.SYS - DEVICE Statements - ISDN Support]] |
| http://www.realtek.com.tw/htm/download/driver.asp
| | *[[CONFIG.SYS - DEVICE Statements - Software Products]] |
| | |
| DEVICE=ALC.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * I5
| |
| The 'I' means interrupt, the available interrupts are 5, 7, 9, 10, 11, 12 and 15
| |
| | |
| * N:ALC1$
| |
| Physical Device Driver name
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=AMOUSE.SYS=
| |
| Mouse Driver for Wheel Mices. like e.g. the:
| |
| * Logitech Pilot Mouse+
| |
| * Logitech Mouse Man+
| |
| * Logitech Optical Wheel Mouse
| |
| * Microsoft Intellimouse
| |
| * IBM Scrollpoint Mouse
| |
| * Typhoon 40159
| |
| * Trust 250S
| |
| | |
| DEVICE=AMOUSE.SYS
| |
| | |
| '''NOTE:''' With Amouse installed XFree86 refuses to work
| |
| Available for FREE at http://home.t-online.de/home/klaus.breining/
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=ANSI.SYS=
| |
| This driver installs the ANSI support for DOS windows.
| |
| | |
| DEVICE=C:\OS2\MDOS\ANSI.SYS <parameters>
| |
| | |
| Parameters:
| |
| * /X
| |
| Enables the redefinition of keys.
| |
| | |
| * /K
| |
| Prevents the use of extended keyboards. Extended keyboards work as standard keyboards.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=APM.SYS=
| |
| Advanced Power Management (APM) device driver. Provides support for your APM BIOS on your motherboard.
| |
| | |
| DEVICE=C:\OS2\BOOT\APM.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /B
| |
| favorizes the direct connection to the APM-BIOS support
| |
| * /D
| |
| favorizes the device-driver connection of the APM support
| |
| * /V
| |
| x.y forces the compatibility to APM Version x.y (e.g. 1.0)
| |
| | |
| Together with the APMDAEMN.SYS these settings can also be done by using the Power-Symbol in your System Setup Folder.
| |
| | |
| '''TIP:''' To work correctly you have 1. to change your Warp-Center properties to 'Show only when Mouse is over Center's position' and 2. enable in 'Power Properties' in your System folder on the 'Performance' page 'Automaticall change performance when the power source changes'. (Only tested with Warp4 fixpak 13).
| |
| | |
| '''TIP:''' When OS/2 fails to install in ACPI only Systems REM this driver (has to be done on the Installationdisks too) or give APM_NH.SYS a try, it is rported to work on Intel based Motherborads too.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE APM_NH.SYS=
| |
| Replacement APM driver (APM_NH.SYS)
| |
| APM_NH.SYS is based on 10.037 level of IBM's APM.SYS (same as XR_D002 but probably outdated with respect to OS/2 v 4.52 G.A.). Its purpose is to honor the APM hooks installed by VIAAPM.SYS while allowing usual APM tasks such as power-down or suspend mode. It is therefore essential that one installs APM_NH.SYS rather than APM.SYS, so the KT266A idle hook would not be taken out by IBM's driver.
| |
| | |
| DEVICE APM_NH.SYS
| |
| | |
| '''Tip:''' In System which only have ACPI it is reported that APM-NH.SYS works even it is a Intel chipset.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=APPOINT.SYS=
| |
| Pen for OS/2 Device Driver for Kurta PenMouse/APT Gliffic Plus.
| |
| DEVICE=APPOINT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ARLTNDIS.OS2=
| |
| ARtem Onair ComCard.
| |
| The ComCard is a IEEE 802.11 compliant wireless LAN network card. For more Information see http://www.artem.de
| |
| | |
| DEVICE=ARLTNDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ARTPAD.SYS= | |
| Device Driver for Wacom Artpad used with Pen for OS/2
| |
| DEVICE=ARTPAD.SYS
| |
| IRQ=4 COMPORT=1 ADRESS=3F8 is used for Com1
| |
| IRQ=3 COMPORT=2 ADRESS=2F8 is used for Com2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ARTZ.SYS=
| |
| Pen for OS/2 Device Driver for Wacom UD-0608.
| |
| DEVICE=ARTZ.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASNPCI.OS2=
| |
| AsanteFast 10/100 PCI Ethernet driver.
| |
| | |
| DEVICE=ASNPCI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASP4CORE.SYS=
| |
| Vortex AU8820 Core OS/2 driver.
| |
| | |
| DEVICE=ASP4CORE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASP4JOY.SYS=
| |
| Vortex AU8820 OS/2 Joystick driver.
| |
| | |
| DEVICE=ASP4JOY.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASP4OS2.SYS=
| |
| Vortex AU8820 OS/2 MMPM/2 driver.
| |
| | |
| DEVICE=ASP4OS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASP4VDD.SYS=
| |
| Vortex AU8820 Virtual DOS driver.
| |
| | |
| DEVICE=ASP4VDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASPIDRV.SYS=
| |
| ASPI Driver supplied by Solution Technology Inc.
| |
| | |
| DEVICE=ASPIDRV.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASPIPFA.SYS=
| |
| Device driver used to distinguish between IDE drives and SCSI drives when using Hard Disk Drive Monitor.
| |
| | |
| The Hard Disk Drive Monitor monitors the status of SMART-compatible harddisk drives in your computer.
| |
| available as ftp://ftp.pc.ibm.com/pub/pccbbs/commercial_desktop/zp1t06a.exe
| |
| | |
| DEVICE=ASPIPFA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASPIROUT.SYS=
| |
| The interface of ASPI Router merely is an extension of the interface of OS2-ASPI.DMD
| |
| needed e.g. by the FREE CDRECORD/2 by [[Chris Wohlgemuth]] available at: http://www.geocities.com/SiliconValley/Sector/5785/ and by the FREE SANE (Scanner Access Now Easy) By [[Yuri Dario]] available at http://www.geocities.com/SiliconValley/Peaks/4320.
| |
| | |
| DEVICE=ASPIROUT.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ASPITAPE.SYS=
| |
| GTAK Driver for SCSI tape access by GTAR scsitape.dmd and scsitape.sys also belong to the package
| |
| By [[Andreas Kaiser]] Andreas.Kaiser@stuttgart.netsurf.de, gtak258.zip gtar258.zip.
| |
| | |
| DEVICE=ASPITAPE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ATALK.SYS=
| |
| Appletalk driver from Lanserver for Macintosh
| |
| | |
| DEVICE=ATALK.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ATI0.sys=
| |
| Used by ATI 3D Rage graphic cards.
| |
| | |
| DEVICE=C:\OS2\ATI0.sys
| |
| | |
| <b>Platform Support:</b>
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ATIM64.SYS=
| |
| Used by ATI 3D Rage grafic cards.
| |
| | |
| DEVICE=C:\OS2\ATIM64.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=ATKP.SYS=
| |
| Appletalk PAP Port driver from Lanserver for Macintosh.
| |
| | |
| DEVICE=ATKP.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=AUDIOVDD.SYS=
| |
| This is the standard VDD for audio device drivers that prevents DOS sessions from accessing the audio hardware when an OS/2 session is using it and vice versa. The driver comes with OS/2 and is used by a lot of diferent soundcards.
| |
| | |
| DEVICE=C:\MMOS2\AUDIOVDD.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * PAS161$ for the MediaVision's ProAudio Spectrum Soundcard
| |
| * SBAUD1$ for the Sound Blaster 16 sound card
| |
| | |
| '''NOTE:''' the parameter is the link between the OS2 driver and the DOS driver. The DOS driver inherits it's settings associated with the parameter
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=AVMB1.SYS=
| |
| Driver for the AVM Active ISDN-Controller B1.
| |
| | |
| DEVICE=AVMB1.SYS
| |
| | |
| '''Parameter:'''
| |
| * /$
| |
| If old programs needs the old naming convention (like an outdated CFOS).
| |
| | |
| '''NOTE:''' The passive AVM-Cards (like the Fritzcard) aren't supported by AVM with OS/2 Drivers.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| | |
| =DEVICE=B57.OS2=
| |
| Broadcom Corporation 10/100/1000 NetXtreme Ethernet DOS/OS2 NDIS2 driver.
| |
| | |
| DEVICE=B57.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=BIPMAC.OS2=
| |
| This is a driver for the IBM Active 2000 ISDN card.
| |
| | |
| DEVICE=C:\IBMbip\OS2\BIPMAC.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=BIPPDD.OS2=
| |
| This is a driver for the IBM Active 2000 ISDN card.
| |
| | |
| DEVICE=C:\IBMbip\OS2\BIPPDD.OS2 <parameter>
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=BIXANDIS.OS2=
| |
| BinTec XAIR WLan PC Card
| |
| http://www.bintec.de/de/index.php?r=prod/XAir&m=navbar.html&c=XAirpc.html
| |
| | |
| DEVICE=BIXANDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=BT32.SYS=
| |
| Radio/TV driver for BT878 based Cards
| |
| | |
| DEVICE=BT32.SYS
| |
| | |
| '''Parameters:'''
| |
| * /V
| |
| Verbose: Show Copyright information
| |
| | |
| * /VM
| |
| Verbose modules: Like /V plus module list
| |
| * /3
| |
| Execute an INT3 at initialisation (Use kernel debugger!)
| |
| * /NOMODULE
| |
| Don't load modules at system startup (Use BT32CFG.EXE to load/unload)
| |
| * /NOCOREMODULE
| |
| Don't load core modules at system startup (Use BT32CFG.EXE to load/unload)
| |
| * /MODPARM:
| |
| Support Linux insmod parameters for various modules
| |
| * /LOADMODULE:
| |
| Load module (only with parameter /NOCOREMODULE)
| |
| * /NOIRQ
| |
| Disable IRQ for BTTV. This is for test purposes only when the driver traps at startup
| |
| | |
| '''NOTE:''' BT32.SYS must reside after LXAPI32.SYS.
| |
| | |
| '''NOTE:''' BT32.SYS contains the following modules:
| |
| * bttv
| |
| * tvaudio
| |
| * tuner
| |
| * msp3400
| |
| * tda7432
| |
| * tda9875
| |
| | |
| '''NOTE:'''
| |
| '''Module parameters:'''
| |
| BT32.SYS contains a lot of module parameters. See documentation in the DOC directory of the package.
| |
| Most important paramers are:
| |
| * bttv card=n Specify a specific BTTV card.
| |
| * tuner=n Specify a specific BTTV tuner.
| |
| Valid numbers for n for both parameters are listed in DOC\CARDLIST
| |
| | |
| See DOC\Insmod-options for all other parameters.
| |
| | |
| '''NOTE:''' If you are using wcast.sys also there may be problems to use the bttv driver after an application has used wcast.sys. (Attention: Multimedia Setup also opens wcast.sys!!!) Known results are: No picture, No sound or both.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=BTSSCSI.SYS=
| |
| Driver for Back Again/2 SCSI tape support.
| |
| | |
| DEVICE=BTSSCSI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=BUNDLE.SYS=
| |
| Module for Teles ISDN Cards.
| |
| | |
| DEVICE=BUNDLE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=BUSAUDIO.SYS=
| |
| C-Media CMI 8330 Soundcard driver (AD 8329 Chip).
| |
| | |
| DEVICE=BUSAUDIO.SYS
| |
| | |
| '''Parameters:'''
| |
| * /D:n
| |
| DMA channel, n=0,1 or 3
| |
| * /I:n | |
| Interrupt, n=5,7,9,10,11 or 12
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CAPI.DLL=
| |
| CAPI-DLL v.1.1 16-bit for ISDN Cards.
| |
| | |
| DEVICE=CAPI.DLL
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CAPI20.DLL=
| |
| CAPI-DLL v.2.0 32-bit for ISDN Cards.
| |
| | |
| DEVICE=CAPI20.DLL
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CAPI20.OS2=
| |
| Eicon Diehl COMMON-ISDN-API Version 2.0.
| |
| | |
| DEVICE=CAPI20.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CAPIVDEV.SYS=
| |
| Virtual Device Driver (VDD)32 bit for HST Janus ISDN Cards for DOS.
| |
| | |
| DEVICE=CAPIVDEV.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CBENDIS.OS2=
| |
| Xircom CardBus Ethernet 10/100 Adapter
| |
| | |
| DEVICE=CBENDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CBEODI.OS2=
| |
| Xircom CardBus Ethernet 10/100 Adapter OS/2 Netware ODI driver.
| |
| | |
| DEVICE=CBEODI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CBEODI.OS2=
| |
| Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for 1TR6(German) protocol.
| |
| | |
| DEVICE=CBEODI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CCAXE.SYS=
| |
| Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol.
| |
| | |
| DEVICE=CCAXE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CCSINIT.SYS=
| |
| ChipChat Sound Initializer
| |
| only needed with warp 4
| |
| | |
| DEVICE=CCSINIT.SYS
| |
| | |
| The ChipChat is one of the rare available Soundcards for the microchannel, it is based on the ESS1688. For more information see: http://www.ChipChat.com
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CD1400.SYS=
| |
| RISC COM CD1400 Device driver by DECISION-COMPUTER INTERNATIONAL Co.,LTD
| |
| | |
| DEVICE=CD1400.SYS
| |
| | |
| '''Parameter:'''
| |
| * /Mxxxx
| |
| card memory address
| |
| | |
| * /Ixx
| |
| IRQ Nø
| |
| | |
| * /Cxx
| |
| Assign the port number of the first port on the card ( COM1 to COM96 )
| |
| | |
| '''NOTE:''' The driver will autodetect the number of communication ports on the card ( 4 or 8 ports ).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CDBASPI.SYS=
| |
| CD-TEK driver to access easily the PIONEER DRM-1804X autochange CD-ROM device.
| |
| DEVICE=CDBASPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CDMF.SYS=
| |
| Used by the Firewall built into TCP/IP 4.1 and above. This is IBM's Commerical Data Masking Facility encryption driver. This driver is an early version of the IBM proposed new national standard encryption protocol (US) with a variable key of up to 128-bits. It supports the VPN (Virtual Private Network) built-in to the firewall of TCPIP 4.1 and later. This driver uses a larger data block than DES and is faster than competing protocol drivers. It is a enhanced version of
| |
| DES. Many to don't consider it as strong an algorithm as Blowfish or Ideal, widely available competitors to this protocol.
| |
| | |
| DEVICE=C:\Mptn\Potocol\Cdmf.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=CDMGRDRV.SYS=
| |
| Driver of the FREE CD-Rom Manager for Plextor SCSI CD-ROM drives. Developed by [[Markus Mueller|Markus]] and [[Christian Mueller]].
| |
| | |
| DEVICE=CDMGRDRV.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CDROMMGR.DMD=
| |
| CD-ROM device manager which prevents subsequent requests to different slots of a CD changer.
| |
| DEVICE=CDROMMGR.DMD
| |
| '''NOTE:''' OS2CDROM.DMD must be disabled to work.
| |
| | |
| '''Parameter:'''
| |
| | |
| * /T:n
| |
| CDROMMGR.DMD has the changer feature enabled by default. It prevents slot changes for 1000ms by returning ERROR_DEVICE_NOT_READY to the caller. The timeout value can be set at load time through option /T: The
| |
| valid range is from 1 second up to 60 seconds. If CDROMMGR.DMD does not find a CD Changer device, the feature will automatically be disabled and cannot be activated.
| |
| | |
| * /C
| |
| CDROMMGR.DMD will manage only CD Changers. Normal CD-ROM drives or CD Burners will not get allocated. This option is
| |
| useful if you want to use another CD-ROM device manager for special features, like CTCDROM.DMD for Unite CD-Maker. To make sure that CDROMMGR.DMD gets control over the CD Changer devices, it has to be loaded as the first CD-ROM manager.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CE3NDIS.OS2=
| |
| Xircom Ethernet Adapter 10/100
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
| |
| | |
| DEVICE=CE3NDIS.OS2
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CFMASPI.SYS=
| |
| Driver for the TWAIN Scanner Module by CFM (Computer for Mankind)
| |
| | |
| DEVICE=CFMASPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CFOS.SYS=
| |
| CFOS is a driver that sits between your ISDN hardware and your Modem Software ( Internet Dialer, Terminal program). It emulates a COM port. 'cFos' device driver receives the usual modem commands, the so-called AT commands from the communication programs and turns them into the corresponding ISDN CAPI commands. ISDN CAPI responses are turned into modem responses of the same meaning, so that the communication programs 'understand' them.
| |
| | |
| DEVICE=C:\Cfos\Cfos.Sys <parameters>
| |
| | |
| As you can enter any equipment names (e.g.: ISDN1) or several COM ports (a maximum of two in the shareware version, up to 30 in 'cFos Professional'). Be careful not to enter COM ports that actually exist as hardware and are in use (e.g. a COM port for your mouse).
| |
| | |
| '''NOTE:''' The CFOS.SYS driver should be loaded after drivers for serial interfaces (COM.SYS oder SIO.SYS) and after the CAPI driver.
| |
|
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=CFOS20.SYS=
| |
| CAPI 2.0 CFOS device driver, for more details see DEVICE CFOS.SYS.
| |
| DEVICE=CFOS20.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CLEANUP.SYS=
| |
| This is a simple device driver that DELETES the specified file. Wild cards are NOT supported. To delete multiple files, add multiple times to config.sys.
| |
| Part of the Graham Utilities 2.X available at http://www.warpspeed.com.au/graham.htm
| |
| | |
| DEVICE=CLEANUP.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CLICHOS2.SYS=
| |
| Crystal Semiconductor CS4299 AC97 Audio Driver (to be found e.g. on IBM T23 Thinkpad)
| |
| This chip doesn't support Midi, you need Timidity to geht Midi working.
| |
| | |
| DEVICE=CLICHOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CMPCI16.SYS=
| |
| C-Media CMI8738 OS/2 Audio Driver ported from Linux sources, based on the SBLive project.
| |
| DEVICE=CMPCI16.SYS
| |
| '''Parameter:'''
| |
| * /V
| |
| verbose (prints copyrights during driver init)
| |
| * /C
| |
| enable CD audio input
| |
| * /M
| |
| enable microphone audio input
| |
| * /L
| |
| enable linein audio input
| |
| * /A
| |
| enable auxin audioinput (since ver. 0.13)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CMPCI32.SYS=
| |
| C-Media CMI8738 OS/2 Audio Driver
| |
| DEVICE=CMPCI32.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V:
| |
| verbose (prints copyrights during driver init)
| |
| * /D:
| |
| print start and end address of code (useful to locate the code that causes a trap (CS:EIP in trapscreen))
| |
| * /R:
| |
| use linein jack to output rear channels
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=COM.SYS=
| |
| This driver is required for serial communications.
| |
| | |
| DEVICE=C:\OS2\Boot\COM.SYS <parameters>
| |
| | |
| '''TIP:''' below. This line MUST appear after any driver that uses a communications port. Older versions of COM.SYS are limited to 57600 Baud, newer ones (e.g. delivered with Warp 4) are able to do 115200 Baud. Beginning with build 10.042 PCI Add-On cards with implemented software interrupt sharing are supported too, beginning with build 10.052 there are 16 com ports available and beginning with build 10.068 Combo Cards are supported.
| |
| | |
| '''TIP:''' There are two very good replacement drivers called SIO.SYS\VSIO.SYS.
| |
| | |
| '''TIP:''' To add support for COM3 and COM4 at location 3E8 with IRQ 4 and 2E8 with IRQ 3 respectively, add (3,3E8,4) (4,2E8,3) to the DEVICE line, e.g.
| |
| DEVICE=drive:\OS2\COM.SYS (3,3E8,4) (4,2E8,3)
| |
| You can also use this method to change a COM ports assigned IRQ. The normal address for COM1 is 3F8 and IRQ 4, for COM2 2F8 and IRQ3.
| |
| | |
| '''TIP:''' With ThinkPads should the address be added. e.g:
| |
| DEVICE=drive:\OS2\BOOT\COM.SYS (1,3F8,4) (2,2F8,3)
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose (since 10.052)
| |
| * /W
| |
| Wait verbose mode (since 10.052). Displaying pauses with a "Press Enter to continue..." message.
| |
| * /F
| |
| Find COM ports on PCI combo (serial/parallel) cards automatically (since 10.068).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=COM02.SYS=
| |
| For IBM PS/2 model 90 & 95 only.
| |
| Lets you use the communications ports COM1 and COM2. See DEVICE COM.SYS.
| |
| DEVICE=COM02.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| =DEVICE=CONCERTO.SYS=
| |
| Pen for OS/2 Device Driver for Compaq Concerto.
| |
| DEVICE=CONCERTO.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| =DEVICE=CPASPI.SYS=
| |
| Driver for scanner access by Impos/2.
| |
| DEVICE=CPASPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CPPOPA3.SYS=
| |
| High-resolution-timer manipulating sampling device driver from IBM?s Visual Age C/C++ (and COBOL) compilers (used by the Profiling tool/Performance Analyzer (ICSPERF)).
| |
| DEVICE=CPPOPA3.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CPPPAN40.SYS=
| |
| Device driver for Visual Age for C++ 4.0 performance analysis.
| |
| DEVICE=CPPPAN40.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CPPVDD.SYS=
| |
| PU Monitor Plus Virtual DOS Driver.
| |
| | |
| DEVICE=CPPVDD.SYS
| |
| | |
| '''TIP:''' By [[Daryl Sperber]]: CPUMONP was last updated in 1996 (for FP17 of Warp connect) and has worked just fine for Warp 3 and Warp 4 all this time. However it obviously now has a fatal incompatibility with FP14 of Warp 4 that is causing the Trap 000e for me.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CPQNF3.SYS=
| |
| OS/2 ODI Driver for Compaq NETFLEX-3/NETELLIGENT Controllers.
| |
| DEVICE=CPQNF3.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CPUMONP.SYS=
| |
| CPU Monitor Plus, from Bon Ami Software.
| |
| DEVICE=CPUMONP.SYS
| |
| '''TIP:''' By [[Daryl Sperber]]: CPUMONP was last updated in 1996 (for FP17 of Warp connect) and has worked just fine for Warp 3 and Warp 4 all this time. However it obviously now has a fatal incompatibility with FP14 of Warp 4 that is causing the Trap 000e for me.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CT5880.SYS=
| |
| Creative Lab Ensoniq CT5880 PCI Audio Device Driver.
| |
| DEVICE=CT5880.SYS
| |
| '''NOTE:''' No MIDI support, no WIN/OS2 support.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CTCDROM.DMD=
| |
| Driver for Unite CD-Maker.
| |
| DEVICE=CTCDROM.DMD
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CWAUDIO.SYS=
| |
| Sound Drivers for the Crystal CS4231, 4232 (A, B), 4235, 4236 (B, D, E), 4237B, 4238B, 4239.
| |
| | |
| DEVICE=CWAUDIO.SYS
| |
| | |
| '''NOTE:''' for 4231, 4232 and 4236 use 'Mode2' driver version (latest 1.7)
| |
| | |
| '''TIP:''' If you have problems with the Yamaha OPL3-SAx chipset: According to a user, instead of using the Yamaha OPL-3 SAx drivers for the same audio chipset, using the driver for Crystal CS4232 works fine without any limitations.
| |
| | |
| A FREE mixer for the crystal cards is LBCSMix V.1.0 from http://freebyte.ml.org/~boga/OS2Programs.html
| |
| | |
| '''Parameter for 'mode3' drivers:'''
| |
| * /N:
| |
| Name of PDD BSAUD1$ (Supplied by install)
| |
| * /V
| |
| Verbose Display
| |
| * /X1:
| |
| AUX1 unmute/gain 0..100 (decimal) (*50) (usually "Line-In")
| |
| * /X2:
| |
| AUX2 unmute/gain 0..100 (decimal) (*50) (usually CD-ROM)
| |
| * /L:
| |
| LINE unmute/gain 0..100 (decimal) (*100)(FM volume)
| |
| * /LCAPT:
| |
| Line-In record source X1, X2, *X1X2, L (X1X2 is mixed aux1+aux2)
| |
| * /T:
| |
| Inactivity power down 1..5 minutes (*1)
| |
| * /MBY:<0,1>
| |
| Mono bypass *1 (mono-in connected to mono-out)
| |
| * /MIM:<0,1>
| |
| Mono input mute *1 (mono-in not connected to input mixer)
| |
| * /MOM:<0,1>
| |
| Mono out mute *0 (audible)
| |
| * /XCTRL0:<0,1>
| |
| XCTRL0 Pin set System specific. Sometimes used to
| |
| * /XCTRL1:<0,1>
| |
| XCTRL1 Pin set control power to amplifier. On IBM
| |
| Aptiva with Bose speakers, set both to 1
| |
| * /P:
| |
| Codec Port *534, 608, (530..FF8, divisible by 4)
| |
| * /I:
| |
| Codec IRQ *5, 7, 9, 11, 15 (decimal)
| |
| * /D:
| |
| Codec DMA 0, 1, 3 (Default 1,0)
| |
| * /C:
| |
| Control Port 120, *538, (120..FF8, divisible by 8)
| |
| * /J:
| |
| Joystick Port *200, 208, NONE
| |
| * /S:
| |
| Sound Blaster Port *220, 240, 260, 280, NONE
| |
| * /M:
| |
| MPU Port and IRQ *330, NONE, (300..3E0, divisible by 8)
| |
| IRQ: 7, 9, 11, 12, 15, *NONE
| |
| * /F:
| |
| FM synth port *388, NONE, (388..3F8, divisible by 8)
| |
| * /IRQRate:dd
| |
| Target interrupt rate *32 Range: 1..64 interrupts per second
| |
| * /DMASize:nnnn
| |
| DMA Buf size maximum *8192 Range: 256..16384 (2 IRQs/Buffer)
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CWGUTIL.SYS=
| |
| Crystal DSP manager utility device driver.
| |
| DEVICE=CWGUTIL.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| =DEVICE=CWMPU401.SYS=
| |
| Crystal MPU401 driver for a complete discription see MPU401.SYS.
| |
| | |
| DEVICE=CWMPU401.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CWVAUDIO.SYS=
| |
| Virtual DOS driver for Crystal Soundcards
| |
| | |
| DEVICE=<drive>:\MMOS2\CWVAUDIO.SYS BSAUD1$
| |
| | |
| '''Parameter:'''
| |
| | |
| * /S
| |
| The CWVAUDIO.SYS driver will automatically set a 'BLASTER' DOS environment variable to the proper audio hardware settings. This is done by adding a '@SET BLASTER=' line to the beginning of all DOS session's autoexec file. This file is specified in DOS session's DOS_AUTOEXEC property. The /S option for CWVAUDIO.SYS will skip the automatic setting of this environment variable.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CWVOPL3.SYS=
| |
| Crystal Midi FM Virtual Dos Driver.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CWWINPDD.SYS=
| |
| Crystal WinOS2 Audio PDD.
| |
| | |
| DEVICE=CWWINPDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=CWWINVDD.SYS=
| |
| Crystal VDD supporting WinOS2 audio DRV.
| |
| | |
| DEVICE=CWWINVDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DC21X4.OS2=
| |
| Digital Semicon. DC21X4-based Ethernet Adapter Network driver.
| |
| | |
| DEVICE=DC21X4.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DCF2CDE.SYS=
| |
| This driver is used by the DCF/2 disk compression program.
| |
| | |
| DEVICE=C:\Dcf2\DCF2CDE.SYS
| |
| | |
| <b>Platform Support:</b>
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DCF2PDD.SYS=
| |
| This driver is used by the DCF/2 disk compression program.
| |
| | |
| DEVICE=C:\Dcf2\DCF2PDD.SYS <parameter>
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DCF2MGR.SYS=
| |
| This driver is used by the DCF/2 disk compression program.
| |
| | |
| DEVICE=C:\Dcf2\DCF2MGR.SYS <parameter>
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DCF77.SYS=
| |
| Driver for DCF77-Radiocontrol Watch.
| |
| Available for FREE at http://www.prog-link.com
| |
| | |
| DEVICE=DCF77.SYS
| |
| | |
| '''Parameter:'''
| |
| * /P:Port
| |
| Port, 201 (Gameport), 379 (LPT1),
| |
| 279 (LPT2), 3BD (LPT3), 3F8 (COM1), 2F8 (COM2), 3E8 (COM3), 2E8 (COM4)
| |
| * /IRQ=nn (or /I:nn)
| |
| Interrupt, 3, 4, 5, 7, 9, 10, 11, 12, 15 or NONE. With
| |
| NONE Polling-Mode is used
| |
| * /V
| |
| Verbose
| |
| * /Q
| |
| Quiet, disables displaying informations during start
| |
| | |
| '''NOTE:''' For a complete list of parameters see the documentation deliverd with the driver.
| |
| | |
| =DEVICE=DDE4EXTRA.SYS=
| |
| Is used by the IBM CSET C/C++ Compiler.
| |
| | |
| DEVICE=C:\User\Cset21\DDE4EXTRA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DE528.OS2=
| |
| D-Link 528CT Ethernet Adapter Network driver.
| |
| | |
| DEVICE=DE528.OS2
| |
| | |
| '''NOTE:''' It is impossible with this driver to execute graphical apps using Exceed.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DELAY.SYS=
| |
| Device driver for providing a timed delay during system startup avaliable for FREE at http://www.tavi.co.uk/os2pages/delay.html
| |
| | |
| DEVICE=DELAY.SYS <parameters>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /K /k,
| |
| -K and -k are equivalent. exits the delay period immediately by pressing any key (apart shift, ctrl, alt etc.)
| |
| * mm:ss
| |
| is the intended delay in minutes and seconds.
| |
| message is an optional message that will appear during the delay period.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DES.SYS=
| |
| This is the current national standard encryption protocol (US) used in triple DES encryption with 128-bit key. It is currently being replaced by a new, but yet not chosen protocol. Use to encrypt user data by the VPN service.
| |
| | |
| DEVICE=DES.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DFE650.OS2=
| |
| D-Link DFE-650 Fast Ethernet PC Card. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
| |
| | |
| DEVICE=DFE650.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DIAPIS.OS2=
| |
| Eicon Diehl COMMON-ISDN-API Version 1.1.
| |
| | |
| DEVICE=DIAPIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DIDD.OS2=
| |
| This device driver stores the configuration information of every installed Eicon.Diehl ISDN-Adapter using the DI(Direct)-Interface and has to be installed before any ISDNSDI.OS2 or ISDNPDI.OS2 drivers.
| |
| | |
| DEVICE=DIDD.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DIMAINT.OS2=
| |
| This device driver is a trace interface for all installed Eicon Diel ISDN adapters and is used by the DILOG.EXE application. The content of a DILOG trace depends on the driver which writes information into the DIMAINT buffer. DIMAINT uses no parameter.
| |
| | |
| DEVICE=DIMAINT.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DISKFIT.SYS=
| |
| Driver for the fault tolerance system. See OS/2 manual for more information.
| |
| DEVICE=DISKFIT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DIVAPP.OS2=
| |
| This utility represents the Plug and Play (PnP) enabler for the Eicon Diehl ISAPlug and Play ISDN adapters.
| |
| | |
| DEVICE=DIVAPP.OS2 <parameters>
| |
| | |
| '''Parameter:'''
| |
| * -a
| |
| I/O address for adapter
| |
| * -i
| |
| Interrupt number to use
| |
| * -q
| |
| Quiet mode
| |
| * -v
| |
| Verbose mode, print detailed information onto screen.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DLKFET.OS2=
| |
| D-Link DFE-530TX PCI Fast Ethernet Adapter.
| |
| | |
| DEVICE=DLKFET.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DLKPCI.OS2=
| |
| D-Link PCI Fast Ethernet Adapter.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/dec.zip.
| |
| | |
| DEVICE=DLKPCI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DLKRTS.OS2=
| |
| D-Link DFE-530TX+ 10/100 Ethernet NIC.
| |
| | |
| DEVICE=DLKRTS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=DM9PCI.OS2=
| |
| DAVICOM DM9 PCI Series Fast Ethernet Adapter (e.g., on the SiS530 motherboard). http://www.davicom.com.tw
| |
| | |
| DEVICE=DM9PCI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DOS.SYS=
| |
| Is needed if you want to run DOS or Windows applications.
| |
| | |
| DEVICE=C:\OS2\BOOT\DOS.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DP820A.SYS=
| |
| National Semiconductor DP83820 Another NDIS 2.0.1 MAC driver.
| |
| | |
| DEVICE=DP820A.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DP83815.OS2=
| |
| National Semiconductor DP83815 10/100 MacPhyter3v PCI Adapter.
| |
| | |
| DEVICE=DP83815.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DP83820.OS2=
| |
| National Semiconductor DP83820 Gig Mac NDIS 2.0.1 OS/2 driver.
| |
| | |
| DEVICE=DP83820.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DPROM01.SYS=
| |
| This driver was found on XTEL software configurations (version 5.6 (MINI X-TEL) and 6.0). This driver is for PLC usage.
| |
| | |
| Examples:
| |
| DEVICE=X:\XPROSYS\EXE\DPROM01.SYS MAXSPEED=9600
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DRVOCDB.SYS=
| |
| Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0.
| |
| | |
| DEVICE=DRVOCDB.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DRVOPPQT.SYS=
| |
| Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0.
| |
| | |
| DEVICE=DRVOPPQT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DRVOQ117.SYS=
| |
| Driver from Seagate Backup Exec for OS/2 Warp, Version 3.0.
| |
| | |
| DEVICE=DRVOQ117.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DSS1C20X.SYS=
| |
| CAPI version 2.0 driver for ELSA ISDN board.
| |
| * D channel protocol : DSS1 (EURO-ISDN)
| |
| * B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
| |
| | |
| DEVICE=DSS1C20X.SYS
| |
| | |
| '''Parameter:'''
| |
| * /a
| |
| IO-Port, e.g. /a160
| |
| * /r
| |
| IRQ, e.g. /r11
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DSS1CAPX.SYS=
| |
| CAPI version 1.1 driver for ELSA ISDN board.
| |
| * D channel protocol : DSS1 (EURO-ISDN)
| |
| * B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
| |
| | |
| DEVICE=DSS1CAPX.SYS <parameters>
| |
| | |
| '''Parameter:'''
| |
| * /a
| |
| IO-Port, e.g. /a160
| |
| * /r
| |
| IRQ, e.g. /r11
| |
| * /N0=MSN0 - /N9=MSN9
| |
| Allocation of MSNs
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DSS1TE.SYS=
| |
| Euro ISDN Module for Teles ISDN Cards
| |
| | |
| DEVICE=DSS1TE.SYS
| |
| | |
| '''TIP:''' If you not already have one better get one from ELSA. Newer Teles Cards are reported to produce many problems (if not fail in general) and there is definetly no further OS/2 development. Also newer Driver Versions (> 2.97) are reported to make trouble.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DTA.SYS=
| |
| Data Transport Agent (DTA) Driver for eComStation.
| |
| It is meant to improve the ability to handle datastreams in eCS, DOS and Win-OS/2 sessions. In addition it will enable virtual DOS sessions to play sound via a generic sounddriver, effectively bypassing the need for soundcard specific DOS drivers.
| |
| | |
| DEVICE=DTA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DTSXPC01.SYS=
| |
| This driver was found on XTEL software configurations (version 5.6 (MINI X-TEL) and 6.0). This driver is for PLC usage.
| |
| This is the TSXPC01 driver.
| |
| | |
| Examples:
| |
| DEVICE=X:\XPROSYS\EXE\DTSXPC01.SYS MAXSPEED=19200
| |
| | |
| DEVICE=X:\XPROSYS\EXE\DTSXPC01.SYS COM=COM2 MAXSPEED=19200
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=DUNTLW01.SYS=
| |
| This driver was found on XTEL software configurations (version 5.6 (MINI X-TEL) and 6.0). This driver is for PLC usage.
| |
| This is the UNTLW01 driver.
| |
| | |
| Examples:
| |
| Ver 5.6 (MINI X-TEL)
| |
| DEVICE=X:\XPROSYS\EXE\DUNTLW01.SYS COM=COM1 SPEED=9600 BASE=1 NBR=2 DNS=0 TIMEOUT=0 PARITY=O NB_BIT=8 NBSTOP=1
| |
| Ver 6.0
| |
| DEVICE=X:\XPROSYS\EXE\DUNTLW01.SYS PROFILE=D:\XPROSYS\EXE\DUNTLW.001
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=E1000.OS2=
| |
| Intel(R) 8254X Based Network Connection Gigabit Ethernet driver.
| |
| | |
| DEVICE=E1000.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=E100B.OS2=
| |
| Intel EtherExpress PRO Adapter, Intel InBussines Ethernet Adapter.
| |
| | |
| DEVICE=E100B.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=E10P.OS2=
| |
| Intel EtherExpress(TM) PRO/10 PCI LAN Adapter.
| |
| | |
| DEVICE=E10P.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=E21ND.OS2=
| |
| Cabletron E21 Ethernet Adapter.
| |
| | |
| DEVICE=E21ND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=E22ND.OS2=
| |
| Cabletron E22 Ethernet Adapter (SNMP).
| |
| | |
| DEVICE=E22ND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EC2T.OS2=
| |
| Linksys Combo PCMCIA EthernetCard (EC2T).
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
| |
| | |
| DEVICE=EC2T.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ECRDRV.SYS=
| |
| Provides support for Remote Support for OS/2. Remote Support can be found in the BonusPak and allows IBM Support Centers to log onto your OS/2 Warp 4 workstation.
| |
| | |
| DEVICE=C:\Bonuspak\RS231B\Ecrdrv.sys
| |
| | |
| <b>Platform Support:</b>
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EISANDIS.OS2=
| |
| Racore EISA Token-Ring Adapter.
| |
| | |
| DEVICE=EISANDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EL59X.OS2=
| |
| 3Com Fast EtherLink & EtherLink III Bus Master Family Network driver.
| |
| | |
| DEVICE=EL59X.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EL90X.OS2=
| |
| 3Com Fast EtherLink/EtherLink XL Family Network driver (e.g. 900 A/B).
| |
| | |
| DEVICE=EL90X.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ELNK3.OS2=
| |
| 3Com Etherlink III Adapter.
| |
| | |
| DEVICE=ELNK3.OS2
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ELPC3.OS2=
| |
| 3Com 3C589 EtherLink III PC Card OS/2 driver.
| |
| | |
| DEVICE=ELPC3.OS2
| |
| | |
| '''TIP:''' The driver traps on system with more than 500MHz clock rates. To solve the problem get 3c589patch.zip to patch the driver. It includes also a ptach to get the 3net_log utility to work with the drivers V. 1.8.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ELPC3X.OS2=
| |
| 3Com EtherLink III LAN+Modem PC Card fr OS2 V1.5 - Card Services driver.
| |
| | |
| DEVICE=ELPC3X.OS2
| |
| | |
| '''TIP:''' If you own a 3COM 3C562D this adding setting to your config.sys may get your card working:
| |
| BASEDEV=RESERVE.SYS /MEM:CB00,1000.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ELSA.SYS=
| |
| Card specific part of GRADD display driver and settings for ELSA WINNER 2000/Office.
| |
| | |
| DEVICE=ELSA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EMI.SYS=
| |
| Pen for OS/2 Mouse Emulation driver.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=EN5251.OS2=
| |
| Accton EN5251 Based Fast Ethernet Adapter.
| |
| | |
| DEVICE=EN5251.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ENDS2ISA.OS2=
| |
| Crystal LAN(tm) CS8900/CS8920 Ethernet Adapter.
| |
| | |
| DEVICE=ENDS2ISA.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EP325.OS2=
| |
| OS/2 NDIS SURECOM EP-325 PCI Ethernet Adapter (based on Realtek RTL8029).
| |
| | |
| DEVICE=EP325.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EP427.OS2=
| |
| SureCom EtherPerfect-427 PCMCIA Ethernet Card.
| |
| | |
| DEVICE=EP427.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EQNKRCSH.EXE=
| |
| Driver by Netfinity* Version 5.20.3.
| |
| | |
| DEVICE=EQNKRCSH.EXE
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EQNKVKBD.SYS=
| |
| Driver by Netfinity* Version 5.20.3.
| |
| | |
| DEVICE=EQNKVKBD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EQNRCSH.EXE=
| |
| Part of DCAF (Distributed Console Access Facility).
| |
| | |
| DEVICE=EQNRCSH.EXE
| |
| | |
| '''ATTENTION:''' If you don't have the IBM Internal Y2K fix it won't work after 31.12.1999.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EQNVKBD.SYS=
| |
| Part of DCAF (Distributed Console Access Facility).
| |
| | |
| DEVICE=EQNVKBD.SYS
| |
| | |
| '''ATTENTION:''' See also DEVICE EQNRCSH.EXE
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ES1371.SYS=
| |
| PCI Ensoniq ES1371 Audio Device Driver
| |
| No WinOS and Midi support.
| |
| | |
| DEVICE=ES1371.SYS
| |
| | |
| '''Note:''' Some users report that the Soundblaster PCI 128 works with this driver. According to the Linux ALSA Project (open-source sound drivers) the ES1371 is built into the PCI 64 and PCI 128. But to complicate things there could also ES1370 chips on the boards
| |
| | |
| There are enhanced drivers (From os2 DDK pciaudio driver sources) with support for ct5880(a,c,d), ev1938(a) based cards developed as a part of Russian Team OS/2 ( OS2.Ru ) projects.
| |
| | |
| See: http://OS2.Ru/index.phtml.en
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ES1688DD.SYS=
| |
| Sounddriver for the ESS1688.
| |
| A FREE mixer for this Soundchip is ESSMIX13.ZIP by Oleg Deribas (older@iname.com).
| |
| | |
| DEVICE=ES1688DD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ES1868DD.SYS=
| |
| Sounddriver for the ESS1868pnp (many soundcards). A FREE Mixer for this soundcard is MINIMIX2.ZIP by Marco G. Salvagno (mgs@whiz.cjb.net) http://whiz.cjb.net.
| |
| | |
| DEVICE=ES1868DD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ES1869DD.SYS=
| |
| Driver for the ESS 1869 soundchip.
| |
| | |
| DEVICE=ES1869DD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ES198X.SYS=
| |
| ESS Allegro-1/Maestro-3 PCI Audio Device Driver.
| |
| DEVICE=ES198X.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ESP.SYS=
| |
| Ray Gwinn's Hayes ESP device driver.
| |
| | |
| DEVICE=ESP.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ET32ND.OS2=
| |
| KTI Networks Inc. base 10 t/tx PCI combo ethernet card.
| |
| | |
| DEVICE=ET32ND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ET32ND.SYS=
| |
| Driver for KTI Networks System ethernet card.
| |
| | |
| DEVICE=ET32ND.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ETHPCI.OS2=
| |
| Acton EN1207 Ethernet Card.
| |
| | |
| DEVICE=ETHPCI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EXCPHEAD.SYS=
| |
| New with eCS 1.1
| |
| | |
| DEVICE=EXCPHEAD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EXMOUSE2.SYS=
| |
| Kensington mouse driver for OS/2.
| |
| | |
| DEVICE=EXMOUSE2.SYS
| |
| | |
| '''NOTE:''' Doesn't work together with the Scitech Display driver
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EXP16.OS2=
| |
| Intel EtherExpress 16 Family Adapter Network driver.
| |
| | |
| DEVICE=EXP16.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=EXTDSKDD.SYS=
| |
| EXTDSKDD.SYS supports external disk drives. See your online Command Reference for complete details.
| |
| | |
| DEVICE=EXTDSKDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=FASTNIC.OS2=
| |
| PCI 10/100 Fast Ethernet Adapter(AN981), PCI 10/100 Fast Ethernet Adapter(AN983), PCI 10/100 Fast Ethernet Adapter(DEC21140), PCI 10/100 Fast Ethernet Adapter(DEC21143) Network Driver.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/amdtek.zip.
| |
| | |
| DEVICE=FASTNIC.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=FETND.OS2=
| |
| PCI Fast Ethernet 10M/100M Adapter.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/via.zip.
| |
| | |
| DEVICE=FETND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=FIREBIRD.SYS=
| |
| Enables the programming of the Gravis Firebird and Thunderbird Joysticks under DOS.
| |
| | |
| DEVICE=FIREBIRD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=FLSH2MTD.SYS=
| |
| PCMCIA Storage Driver for OS/2 (FLASH MTD).
| |
| | |
| DEVICE=FLSH2MTD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=FMD.SYS=
| |
| Driver required by Faxworks lite 2.* in Warp 3 or the Pro Versions of Faxworks/PMFax.
| |
| | |
| DEVICE=FMD.SYS
| |
| | |
| '''Parameter:'''
| |
| * L = disable logo on error free boot
| |
| * T = do port tests (default)
| |
| * N = no port tests, assume ports exist (PCMCIA default)
| |
| * S = allow interrupt sharing (MCA bus only)
| |
| * A = get ABIOS LID on port open (MCA bus only)
| |
| | |
| * c = COM number (1-48)
| |
| * h = I/O port address (in hex)
| |
| * i = interrupt number
| |
| (defaults are for the standard COM ports)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=FMRADIO.SYS=
| |
| Driver for the FREE PMRADIO by [[Paul Ratcliffe]].
| |
| OS/2 PM application for driving the Reveal RA300 FM radio card and the old version of the AIMS Labs. RadioTrack card.
| |
| | |
| DEVICE=FMRADIO.SYS <parameters>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /P:port
| |
| port is the RA300 port address (in hex.). The port addresses supported are 30F and 20F. The /P parameter is optional and if not supplied, will default to address 30F.
| |
| | |
| The port address must match that which you have configured on the card itself using jumper JP1. The device driver is Resource Manager compliant and will not install if some other device has already claimed the ports (the hardware actually consumes 4 ports: 30C-30F or 20C-20F).
| |
| | |
| * /V
| |
| It may be specified if you don't wish the device driver to turn the radio volume down when shutting down OS/2.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=FTDVR.SYS=
| |
| The Ftdvr.sys driver is used by the BackMaster backup program. It is needed if your tape drive is connected to the floppy interface.
| |
| | |
| Device=C:\BackMast\FTdvr.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=FWIP.SYS=
| |
| Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IP packet filtering to the Firewall.
| |
| | |
| DEVICE=C:\Mptn\Potocol\Fwip.sys
| |
| | |
| IP Packet Filter Driver. This component of the VPN security system manages the firewall packet fileter and address translation service. Part of the TCP/IP Ver. 4.1/4.2/4.21 firewall
| |
| | |
| For configuring the Firewall get the FREE ServerConfig Which can be found at: http://www.ecs.soton.ac.uk/~dm898/soft.html a GUI config util for Apache 1.3.9, InetPowerServer/2 0.85 and the IBM OS/2 TCP/IP Firewall. Author: [[SEHH]] (sehh@altered.com)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=FXWRAP.SYS=
| |
| NDIS wrapper for the InJoy Firewall for OS/2
| |
| from: http://www.fx.dk/firewall
| |
| | |
| DEVICE=FXWRAP.SYS
| |
| | |
| Designed with Cable Modems and LAN-2-LAN connections in mind, the InJoy Firewall is a complete Internet Gateway, Firewall and IPSec VPN gateway/client in one.
| |
| FEATURES: IPSec; PPPoE; Superior performance NDIS Protocol Engine; RFC 1631-NAT support; Direct Internet Access for your LAN PC's; Packet Filtering; Traffic Accounting, Port Redirection; Rule Based Access Control; Identd support; No reconfiguration of software; Great step-by-step docs; YK2; PM & text GUI; DHCP support; On-the-fly updates.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=GAMEDD.sys=
| |
| It is used by many Soundcards. It gives support for the Joystick connector for OS/2 programs.
| |
| | |
| DEVICE=C:\MMOS2\GAMEDD.sys
| |
| | |
| The following joysticks are supported by this driver:
| |
| * Advance Gravis Analog Joystick
| |
| * Advance Gravis GamePad
| |
| * Advance Gravis Analog Pro
| |
| * CH Products Flightstick
| |
| * Dexxa Joystick ( Infrared )
| |
| * Kraft Thunderstick
| |
| * Logitech WingMan Extreme
| |
| * Logitech Wingman
| |
| * Thrustmaster XL Action Controller
| |
| | |
| There is also an Enhanced Joystick driver by Vesa J„„skel„inen who supports the following joysticks:
| |
| * Generic 4 axis and 4 button joystick
| |
| * Gravis GamePad Pro (in GrIP mode)
| |
| * CH FlightStick Pro
| |
| | |
| <b>Platform Support:</b>
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=GAMEPRT2.SYS=
| |
| Joystick interface driver. By Jose DaSilva silva@dowco.com.
| |
| | |
| DEVICE=GAMEPRT2.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /VB
| |
| displays the gameport header at startup.
| |
| | |
| * /P:hhhh
| |
| Is the joystick port (hhhh=hex address of port)
| |
| | |
| * /W:hhhh
| |
| Is the wait run-a-way counter (hhhh=waiting time).
| |
| | |
| '''NOTE:''' This driver is incompatible with the original IBM GAMEDD.SYS. You must use GAMEDD.SYS from the same author.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=GAMEVDD.SYS=
| |
| It is used by many Soundcards. It gives support for the Joystick connector for Dos and Windows programs.
| |
| | |
| DEVICE=C:\MMOS2\GAMEVDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=GENSCSI.SYS=
| |
| Generic SCSI device driver. The basic function of GENSCSI.SYS is to provide applications with an interface to OS2SCSI.DMD. It only answers 4 commands: Open, Close, IOCtl, and Init. All others cause an Invalid Command error. GENSCSI accepts IOCtl commands in the same format that OS2SCSI does, except GENSCSI expects all addresses to be ring 3 addresses while OS2SCSI expects them to be ring 0 addresses, physical addresses or scatter/gather lists. GENSCSI will convert the ring 3 addresses to the proper form and pass the command on to OS2SCSI. When OS2SCSI is done with the command, it returns the results back to GENSCSI who passes it back to the application. Developed by [[Dennis Rowe]] available for free as part of scsipg.zip.
| |
| | |
| DEVICE=GENSCSI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=GPH2USB.SYS=
| |
| USB driver for GPhoto2
| |
| | |
| DEVICE=GPH2USB.SYS
| |
| | |
| NOTE: With this driver installed accessing your camera using the USBMSD.ADD or CWUSBMSD.ADD drivers doesn't work.
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=GRADD.SYS=
| |
| Graphiccard driver.
| |
| | |
| DEVICE=C:\OS2\Boot\GRADD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=GRAHPIRE.SYS=
| |
| WACOM Graphire Tablet device dependant OS/2 driver (serial model). It supports both Graphire Pen & Mouse and emulates usual 3-button serial mouse.
| |
| | |
| DEVICE=GRAHPIRE.SYS <parameters>
| |
| | |
| '''Parameter:'''
| |
| | |
| * SERIAL=COMn
| |
| Specifies the COM Port, COM1 is used by default
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=GWDTA.SYS=
| |
| Generic Winos2 audio driver. Works under DOS for Winos2 sessions.
| |
| http://home.wanadoo.nl/~rwklein/
| |
| | |
| DEVICE=GWDTA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=HDLC.SYS=
| |
| HDLC Module for Teles ISDN Cards.
| |
| | |
| DEVICE=HDLC.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=HPFEND.OS2=
| |
| HP DeskDirect 10/100 PCI LAN Adapter.
| |
| | |
| DEVICE=HPFEND.OS2
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=HPS_S60H.SYS=
| |
| Sytos Premium Driver for HP SureStore 6000
| |
| | |
| DEVICE=HPS_S60H.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=HRTIMER.SYS=
| |
| HRTIMER.SYS is a high resolution timer implemented as a device driver. Shows more accurate reading of e.g. the CPU-Meter in Memsize.
| |
| | |
| DEVICE=HRTIMER.SYS
| |
| | |
| '''NOTE:''' Do not run any Windows session while using HRTIMER.SYS otherwise the output is either much too high or much too low. HRTimer (all versions) requires he time slice be less than 55 milliseconds. This should be the case in all unaltered environments. If you choose to increase the TIMESLICE setting in the CONFIG.SYS you may not be able to use HRTimer (readout too low).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=I2OLOSM.OS2=
| |
| IBM I2O Token Ring LAN Driver
| |
| | |
| DEVICE=I2OLOSM.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IAS_DD.OS2=
| |
| OS/2 IrDA IAS Driver Copyright (C) IBM Corp. These drivers work on the IBM ThinkPad 380, 380D, 380E, 380ED, 380XD, 380Z, 385D, 385ED, 385XD, 560E, 560X, 560Z, 600, 600E, 770, 770E, 770ED, 770X. They do NOT work on the 560.
| |
| | |
| The IRCOMM.SYS driver make it possible to assign a virtual COM port to your Infrared attached IrCOMM
| |
| device (Cellular phone, etc.). You can then use any COM port aware application package to access the
| |
| device like through a normal COM port, i.e. issue AT commands to a modem, etc.
| |
| | |
| Communication Applications tested with this release are:
| |
| | |
| * InJoy IP Dialer V2.3
| |
| * Opalis BTX decoder (German online service)
| |
| * ...
| |
| | |
| IrCOMM also supports printing via the infrared port. Just install the right printer driver, then point it to the COM port IrCOMM is using. For Win-OS/2 printing, you can select the same COM port as you Win-OS/2 printer port.
| |
| | |
| Printers tested so far:
| |
| | |
| * HP LaserJet 6MP
| |
| * HP DeskJet 340
| |
| | |
| Whenever the IRCOMM driver detects a device, you will see the red indicator come on and tell you
| |
| there's an active connection.
| |
| | |
| DEVICE=IAS_DD.OS2 <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /L
| |
| Legacy mode support.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IBG_DATI.DRV=
| |
| Sytos Plus driver for the IBM 2.0G 4mm Tape.
| |
| DEVICE=IBG_DATI.DRV
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBM360P.SYS=
| |
| Pen for OS/2 Device Driver for IBM360P.
| |
| | |
| DEVICE=IBM360P.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBM730T.SYS=
| |
| Pen for OS/2 Device Driver for IBM730T.
| |
| | |
| DEVICE=IBM730T.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBM750P.SYS=
| |
| Pen for OS/2 Device Driver for IBM750P.
| |
| DEVICE=IBM750P.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMCOMO.SYS=
| |
| Device driver for the IBM Advanced System Mangement service processor hardware.
| |
| DEVICE=IBMCOMO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMCSFLK.SYS=
| |
| Driver from Corrective Service Facility (CSF) necessary to exchange locked files. Normally this driver should only appear during the reboot after applying a fixpak. If you have this driver installed installation/exchange of locked files may have failed.
| |
| | |
| DEVICE=IBMCSFLK.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMFE.OS2=
| |
| IBM 10/100 EtherJet PCI Adapter.
| |
| DEVICE=IBMFE.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMGE.OS2=
| |
| IBM OS/2 1000Base-SX and 1000Base-T Gigabit Ethernet Adapter Support for Options by IBM 34L0301 1000BaseSX Gigabit Ethernet Adapter (See restrictions), Options by IBM 06P3701 1000BaseSX Gigabit Ethernet Adapter, Intel 82542 Based 1000BaseSX Gigabit Ethernet Adapter (See restrictions), Intel 82543 Based 1000BaseSX Gigabit Ethernet Adapter (PRO1000/F), Intel 82544 Based 1000BaseSX Gigabit Ethernet Adapter (PRO1000/XF)
| |
| | |
| DEVICE=IBMGE.OS2
| |
| | |
| '''NOTE:''' It is designed to work with the 1000BaseSX Fiber Adapter only.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMLANLK.SYS=
| |
| Driver necessary to exchange locked files. Normally this driver should only appear during the reboot. So if you see it installation/exchange of locked files may have failed.
| |
| | |
| DEVICE=IBMLANLK.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMSPO.SYS=
| |
| Device driver for the IBM Advanced System Mangement service processor hardware.
| |
| | |
| DEVICE=IBMSPO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=IBMTOK.OS2=
| |
| Network adapter driver for IBM Token-ring cards.
| |
| | |
| DEVICE=C:\Ibmcom\Macs\IBMTOK.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IBMTOKCS.OS2=
| |
| IBM Turbo 16/4 Token-Ring PC Card.
| |
| | |
| DEVICE=IBMTOKCS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IBMTRP.OS2=
| |
| IBM Token Ring Ethernet PCI card.
| |
| | |
| DEVICE=IBMTRP.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ICHCSND.SYS=
| |
| Analog Devices SoundMax Integrated Digital Audio AD188x/198x OS/2 driver for Intel 82801AA/AB/BA/CA/DB/EB and NVidia MCP2/CK8 chipsets.
| |
| | |
| DEVICE=ICHCSND.SYS
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ICHKDD.SYS=
| |
| Sophos Ant-Virus InterCheck on-access scanner driver.
| |
| | |
| DEVICE=ICHKDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=ICHCVDD.SYS=
| |
| AD18xx/19xx virtual DOS driver for Intel 82801AA/AB/BA/CA/DB/EB and NVidia MCP2/CK8 chipset.
| |
| | |
| DEVICE=ICHCVDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ICHSND.SYS=
| |
| Analog Devices SoundMax Integrated Digital Audio AD18xx for Intel 82801AA/AB chipsets.
| |
| | |
| DEVICE=ICHSND.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=ICHVDD.SYS=
| |
| AD1881 virtual DOS driver for Intel 82801AA/AB chipset.
| |
| | |
| DEVICE=ICHVDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IDEHDD.SYS=
| |
| MULTIPORT/Kingbyte Parallel Port hard disk drive device driver.
| |
| http://www.multiport.de
| |
| http://www.kingbyte.com
| |
| | |
| DEVICE=IDEHDD.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * /Sn
| |
| Set the starting search port access speed level for printer port. If this parameter is not specified, driver will try from the fastest speed level 0, and then level 1, level 2 until level 9 automatically, n must be 0 ~ 9. Default value is 0 (the fastest level).
| |
| | |
| * /Zn
| |
| n is a byte-length value bit1 = 1, suppress bi-direction mode = 0, not suppress bi-direction mode (default) bit2 = 1, suppress uni-direction emulation mode= 0, not suppress uni-direction emulation mode (default) bit3 = 1, suppress epp emulation mode = 0, not suppress epp emulation mode (default)
| |
| | |
| Ex: /Z8 --> suppress EPP mode
| |
| | |
| Ex: /Z10 --> suppress EPP & bi-direction mode
| |
| | |
| Ex: /Z14 --> suppress EPP & bi-direction & uni-direction mode
| |
| | |
| * /!E
| |
| Suppress 528MB larger enhanced IDE support Default the driver will use the LBA mode to support 528MB larger enhanced IDE.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IFNDIS.SYS=
| |
| Network protocol driver. Used by TCP/IP.
| |
| | |
| DEVICE=C:\Mptn\Potocol\IFNDIS.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IFNDISNL.SYS=
| |
| TCP/IP Drivers for SLIP (Serial Line Internet Protocol) OS/2 TCP/IP Version 2.00 IFNDIS Null Driver from the Warp 3 Internet Access Kit.
| |
| | |
| DEVICE=IFNDISNL.SYS
| |
| | |
| '''TIP:''' To get PPP (Pont to Point Protocol) download ftp://ftp.ibm.net/pub/PPP/PPP.ZIP
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=INET.SYS=
| |
| TCP/IP Drivers for SLIP (Serial Line Internet Protocol) OS/2 TCP/IP Version 2 from the Warp 3 Internet Access Kit.
| |
| | |
| DEVICE=INET.SYS
| |
| | |
| '''TIP:''' For PPP see also DEVICE IFNDISNL.SYS.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=INIT931.SYS=
| |
| OPTi 82C931 Init Device Driver.
| |
| | |
| DEVICE=INIT931.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| '''NOTE:''' Only valid for Warp3, Warp4 uses the PnP Ressource Manager.
| |
| | |
| '''MODE:''' wss, sb (default Windows Sound System)
| |
| | |
| * BASE: 220, 240 (for Sound Blaster mode, default 220) 534, E84, F44, 608 (for Windows Sound System mode, default 534)
| |
| * CDTYPE: None, IDE (default None) One character is adequate (e.g. CDTYPE:N CDTYPE:I)
| |
| * CDBASE: None, 376 IDE - 376 (fixed)
| |
| * CDIRQ: None, 15 IDE - 15 (fixed)
| |
| * SBIRQ: 5, 7, 10, 11 (default 7)
| |
| * SBDMA: 1, 2, 3 (default 1)
| |
| * SSIRQ: 7, 9, 10, 11
| |
| * WSSDMA: 0, 1, 3 (default 1)
| |
| | |
| '''NOTE:''' The WSS IRQ and DMA are specified here. The audio PDD will query INIT931.SYS to learn of the device settings.
| |
| | |
| * GAMEPORT: 0,200,201,202,203,204,205,206,207 (0 disabled)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IP22DRV.SYS=
| |
| Driver from Dualstor backup.
| |
| | |
| DEVICE=IP22DRV.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IPSEC.SYS=
| |
| Used by the Firewall built into TCP/IP 4.1 and above. This driver adds IPSEC security to the Firewall.
| |
| This driver is the protocol driver for controlling VPN between two or more systems. It starts the key exchange and negotiation of protocols to be used. It then manages the exchange using the agreed items.
| |
| | |
| DEVICE=C:\MPTN\PROTOCOL\IPSEC.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IPX.SYS=
| |
| Gives support for the Novell Netware IPX protocol.
| |
| | |
| DEVICE=C:\Netware\IPX.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRCOMM.SYS=
| |
| OS/2 IrDA IrCOMM Device Class Driver. These drivers work on the IBM ThinkPad 380, 380D, 380E, 380ED, 380XD, 380Z, 385D, 385ED, 385XD, 560E, 560X, 560Z, 600, 600E, 770, 770E, 770ED, 770X. They do NOT work on the 560.
| |
| | |
| DEVICE=IRCOMM.SYS
| |
| | |
| '''Parameter:'''
| |
| * /V
| |
| Tells you which COM port the driver has assigned to itself
| |
| | |
| * /COMPORT:COMx
| |
| Sets the COM port that IrCOMM will use.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRDANDIS.OS2=
| |
| IBM Infrared NDIS MAC Driver. This code replaces the IR drivers that are shipped with Warp 4 / Warp Server for e-business, which works on the 760 series Thinkpads, but not on the newer ones.
| |
| | |
| The drivers support the following software combinations:
| |
| * OS/2 Warp 4.0 (TCP/IP 4.x, Peer networking, LAN Requester)
| |
| * OS/2 Warp Server for e-business
| |
| | |
| All protocols which use NDIS (i.e. NetBIOS, TCP/IP, 802.2) may be used.
| |
| | |
| DEVICE=IRDANDIS.OS2
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRDA_DD.OS2=
| |
| IrDA Stack drivers are designed to work on following IBM Thinkpad Models: 380, 380D, 380E, 380ED, 380XD, 380Z, 385D, 385ED, 385XD, 560E, 560X, 560Z, 600, 600E, 600X, 770, 770E, 770ED, 770X, T20, T21, T22, T23. They do NOT work on the 560.
| |
| | |
| DEVICE=IRDA_DD.OS2
| |
| | |
| '''Parameter:'''
| |
| * /Wn
| |
| Packet window size in range 1..7. Default value is 7. Used to calculate physical layer receive buffer size by following formula: 2k * n + 2k
| |
| | |
| * /Nn
| |
| Number of LSAP clients in range 1..112. Default value is 8.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRDA_PHY.OS2=
| |
| IrDA Stack drivers are designed to work on following IBM Thinkpad Models: 380, 380D, 380E, 380ED, 380XD, 380Z, 385D, 385ED, 385XD, 560E, 560X, 560Z, 600, 600E, 600X, 770, 770E, 770ED, 770X, T20, T21, T22, T23. They do NOT work on the 560.
| |
| Tests are performed for following systems:
| |
| * Thinkpad 600E, 600X, T20, T21
| |
| | |
| Tests are performed for following adapters:
| |
| * ACTiSYS IR-220L+
| |
| | |
| Tests are performed for following printers:
| |
| * HP LaserJet 6M/6MP, HP LaserJet 2200
| |
| | |
| Tests are performed for following cell phones:
| |
| * Nokia 6210, 7110
| |
| * Ericsson R320, SH888
| |
| * Siemens S25, S35i, ME45
| |
| | |
| DEVICE=IRDA_PHY.OS2 <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /Pn
| |
| Hexdecimal port number.
| |
| | |
| * /In
| |
| Interrupt number.
| |
| | |
| * /Sn
| |
| Hexdecimal port number for SDLC.
| |
| | |
| * /Jn
| |
| Interrupt number for SDLC.
| |
| | |
| * /Dn
| |
| Transmit Tx DMA channel
| |
| | |
| * /En
| |
| Receive Rx DMA channel
| |
| | |
| Current code isn't capable to recognize all existing Infrared hardware configurations automatically and therefore driver provides a command line parameters interface which allows user to specify hardware configuration settings manually. If hardware configuration is recognized, command line settings will be ignored.
| |
| | |
| If the driver doesn't recognize the hardware settings, it will serve Infrared adapter at 0x3F8 using IRQ4 (COM1 default settings) using SIR mode.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRDD.SYS=
| |
| Installs the Infrared Device Driver at COM2.
| |
| | |
| DEVICE=IRDD.SYS
| |
| | |
| To print through that port, the driver INFRARED.PDR needs also to be installed.
| |
| | |
| '''TIP:''' For Thinkpads the address and the IRQ should be added.
| |
| E.g. Device=C:\OS2\BOOT\IRDD.SYS 2F8 3. This is valid only if IRQ 3 isn't used yet. If it is, another one has to be chosen (with an appropriate I/O address).
| |
| To print through that port, the driver INFRARED.PDR needs to be installed by changing the Printer Output Port settings in the Printerdriver Properties.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRDNDIS.OS2=
| |
| IBM Infrared NDIS MAC Driver.
| |
| | |
| DEVICE=IRDNDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IRMAC.OS2=
| |
| IBM Wireless LAN PCMCIA Adapter driver.
| |
| | |
| DEVICE=IRMAC.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ISDNAPI.SYS=
| |
| Module for Teles ISDN Cards.
| |
| | |
| DEVICE=ISDNAPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ISDNBASE.SYS=
| |
| AVM Fritz ISDN PCCard (aka PCMCIA) driver.
| |
| | |
| DEVICE=ISDNBASE.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| * /S
| |
| Load Silent, no messages during Boot.
| |
| * /IRQ:xx
| |
| Specifies an Interrupt for the driver, e.g. /IRQ:10
| |
| * /IO:xxx
| |
| Specifies an IO-Address, whereby possible resources are 140 and 300
| |
| * /EXCL:xxxx
| |
| a bit mask definition of excluded interrupts, eg. /excl:F947
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ISDNC20X.SYS=
| |
| CAPI version 2.0 driver for ELSA ISDN board.
| |
| * D channel protocol : 1TR6 (national ISDN)
| |
| * B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
| |
| | |
| DEVICE=ISDNC20X.SYS
| |
| | |
| '''Parameter:'''
| |
| * /a IO-Port, e.g. /a160
| |
| * /r IRQ, e.g. /r11
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ISO8208.SYS=
| |
| ISO 8208 Module for Teles ISDN-Cards.
| |
| | |
| DEVICE=ISO8208.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=IWZPAN40.SYS=
| |
| Performance analyzer device driver from the IBMCOBOL v 2.2.2.
| |
| | |
| DEVICE=IWZPAN40.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=JJSCDROM.DMD=
| |
| Modified CD-ROM device manager with CD-DA digital readout / multisessioning enhancement developed by Takayuki Suwa (jjsuwa@sys3175.com)
| |
| | |
| DEVICE=JJSCDROM.DMD
| |
| | |
| '''Parameters:'''
| |
| * /Q
| |
| quiet; displays no messages if not installed
| |
| | |
| * /V
| |
| verbose; displays CD-ROM unit information
| |
| | |
| * /VP
| |
| same as /V, with pausing (requires PAUSEONERROR=YES)
| |
| | |
| * /R:n
| |
| reserves at least n driveletters (driveletter reservation)
| |
| | |
| * /S
| |
| assigns only 1 driveletter to SCSI-3/MMC / ATAPI changer units
| |
| | |
| * /W
| |
| treats all WORM devices as CD-ROM; in order to not apply this treatment to specific unit(s), use /U:n /I
| |
| | |
| * /U:n
| |
| specifies unit number for /Fxy and /I, 0 based
| |
| | |
| * /I
| |
| ignores unit (no driveletter assignment)
| |
| | |
| * /Fxy
| |
| enforces CD-DA / CD-XA / multisessioning / UPC treatments; without preceding /U, applies to all units
| |
| | |
| * /FC+
| |
| forces "CD-DA readable" flag on
| |
| | |
| * /FCS
| |
| enforces Sony CDU-561 compatible SCSI CD-DA readout method *
| |
| | |
| * /FCT
| |
| enforces Toshiba XM-3401 compatible SCSI CD-DA readout method *
| |
| | |
| * /FC
| |
| same as /FC+ /FCS
| |
| | |
| * /FX+
| |
| forces "CD-XA readable" flag on
| |
| | |
| * /FXT
| |
| enforces Toshiba XM-3401 compatible SCSI CD-XA readout method *
| |
| | |
| * /FXS
| |
| enforces Sony CDU-561 compatible SCSI CD-XA readout method *
| |
| | |
| * /FXN
| |
| enforces NEC 84-1 compatible SCSI CD-XA readout method *
| |
| | |
| * /FX
| |
| same as /FX+ /FXS
| |
| | |
| * /FM+
| |
| forces "multisessioning-aware" flag on
| |
| | |
| * /FMT
| |
| enforces Toshiba XM-3401 compatible SCSI multisessioning method *
| |
| | |
| * /FMS
| |
| enforces Sony CDU-561 compatible SCSI multisessioning method *
| |
| | |
| * /FMC
| |
| enforces Chinon CDS-535 compatible SCSI multisessioning method *
| |
| | |
| * /FMN
| |
| enforces NEC 84-1 compatible SCSI multisessioning method *
| |
| | |
| * /FMH
| |
| enforces HP C4324 compatible SCSI multisessioning method *
| |
| | |
| * /FMX
| |
| enforces NEC 46x compatible SCSI multisessioning method *
| |
| | |
| * /FM
| |
| same as /FM+ /FMS
| |
| | |
| * /FUU
| |
| marks as "UPC readable" and enforces unpacked raw UPC format *
| |
| | |
| * /FUP
| |
| marks as "UPC readable" and enforces packed raw UPC format *
| |
| | |
| * /FUA
| |
| marks as "UPC readable" and enforces ASCII raw UPC format *
| |
| | |
| * /FU
| |
| same as /FUA
| |
| | |
| * /F
| |
| same as /FC+ /FCS /FX+ /FXS /FM+ /FMS
| |
| | |
| * because SCSI-3/MMC / ATAPI drives can automatically detect and configure their own capabilities, these options are ignored on such drives.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KBLS120.SYS=
| |
| Kingbyte LS-120 ATAPI Disk Driver.
| |
| http://www.kingbyte.com
| |
| | |
| DEVICE=KBLS120.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KBPD.SYS=
| |
| Kingbyte OS/2 Parallel PD ATAPI Disk Driver.
| |
| http://www.kingbyte.com
| |
| | |
| DEVICE=KBPD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KBZIP100.SYS=
| |
| KingByte Parallel Port IOMEGA ZIP 100 drive.
| |
| http://www.kingbyte.com
| |
| | |
| DEVICE=KBZIP100.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * /Sn
| |
| Set the starting search port access speed level for printer port. If this parameter is not specified, driver will try from the fastest speed level 0, and then level 1, level 2 until level 9 automatically, n must be 0 ~ 9. Default value is 0 (the fastest level).
| |
| | |
| * /Zn
| |
| n is a byte-length value bit1 = 1, suppress bi-direction mode = 0, not suppress bi-direction mode (default) bit2 = 1, suppress uni-direction emulation mode = 0, not suppress uni-direction emulation mode (default) bit3 = 1, suppress epp emulation mode = 0, not suppress epp emulation mode (default)
| |
| | |
| Ex: /Z8 --> suppress EPP mode
| |
| | |
| Ex: /Z10 --> suppress EPP & bi-direction mode
| |
| | |
| Ex: /Z14 --> suppress EPP & bi-direction & uni-direction mode
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=KDBNET.SYS=
| |
| Kernel Failure Networkprotocol, enables remote Kernel-Failure repair over TCP/IP.
| |
| | |
| DEVICE=KDBNET.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KILLER.SYS=
| |
| Used by the Watchcat task killer.
| |
| | |
| DEVICE=C:\User\Watchcat\KILLER.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KMGAX64.SYS=
| |
| It is used by Matrox Graphiccards.
| |
| | |
| DEVICE=C:\Mga\Os2\KMGAX64.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KOPYKAT.SYS=
| |
| Driver for KopyKat Remote Control Software by Hilgraeve INC.
| |
| | |
| DEVICE=KOPYKAT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KSCOM.SYS=
| |
| Kamell ISDN Comport Device Driver (At-Commands with Fax Class 2.0)
| |
| | |
| DEVICE=KSCOM.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /P:COMx
| |
| Port (Default COM3)
| |
| | |
| * /C:x
| |
| Controller (Default Controller)
| |
| | |
| * /S:x
| |
| Serialnumber
| |
| | |
| * /A:x
| |
| Activation key
| |
| | |
| * /K:DIVA
| |
| Cardtype (only for Eicon DIehl DIVA Cards Version 5.0.3 or higher)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KTC110.OS2=
| |
| Kingston EtheRX PCI Fast Ethernet Adapter.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.
| |
| | |
| DEVICE=KTC110.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KTC111.OS2=
| |
| Kingston Fast EtheRx KNE111TX PCI Fast Ethernet Adapter.
| |
| | |
| DEVICE=KTC111.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KTC120.OS2=
| |
| Kingston EtheRX PCI Fast Ethernet Adapter.
| |
| | |
| DEVICE=KTC120.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KTC40.OS2=
| |
| Kingston EtheRx PCI-Ethernet-Networkadapter driver.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.
| |
| | |
| DEVICE=KTC40.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=KURTAXGT.SYS=
| |
| Pen for OS/2 Device Driver forKurta.
| |
| | |
| DEVICE=KURTAXGT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=L100.OS2=
| |
| PNIC 100 Base FX Fast Ethernet adapter.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.
| |
| | |
| DEVICE=L100.OS2
| |
| | |
| '''TIP:''' By [[Jan Swartling]]. To get this driver to work with a Netgaer FA 310TX edeit the L100.NIF as follows:
| |
| | |
| [Media_Mode]
| |
| display = "Serial connection type"
| |
| type = string
| |
| strlength = 14
| |
| optional = yes
| |
| set = TP_10,TP_10_FD,TP_100,TP_100_FD,AUTODETECT
| |
| default = AUTODETECT
| |
| help = "This parameter specifies the serial connection type used on the adapter.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANDD.OS2=
| |
| IBM IEEE 802.2 NDIS protocol driver.
| |
| Information passed by [[Sergey I. Yevtushenko]] (evsi@naverex.kiev.ua) http://es.os2.ru/
| |
| | |
| Author of:
| |
| * Fast Editor Lite (FED) Powerful programmers editor for OS/2.
| |
| * PU Monitor System monitoring tool for OS/2 PM
| |
| * Cell Toolkit Small library for OS/2 PM
| |
| | |
| In short, that driver allows application to send/receive Ethernet (and TokenRing if I remember correctly) frames in a NIC-independent way. Format of the frame described in IEEE 802.2 standard. Applications using this protocol driver are e.g.: Lexmarks' MarkVision uses it for Lexlink protocol support and Remote IPL.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANDD.SYS=
| |
| Lan Manager's user device driver.
| |
| Provides services for MAC frame protocols.
| |
| | |
| DEVICE=LANDD.SYS
| |
| | |
| '''NOTE:''' By [[Jeff Summner]]: Looking at the driver, it supplies the driver names \dev\LANDD$ and requires another device, \dev\protman$ to work. In my experience, in OS/2 it is strictly used for SNA, be that Anynet (Netbios over SNA/APPN) or simple Mainframe connectivity. It is also used to configure Bridges and LAM/CAU equipment. It does allow for some pretty cool stuff, like simple Token Ring utilization figures (a la Ringutil, IBM EWS, useless at full duplex, though) and Token Ring Diags (last ring code, upstream neighbor, beaconing MAC, Ring Parameter Server reporting.)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANDLLDD.OS2=
| |
| Lan Manager interface to LAND.OS2--the 802.2 protocol.
| |
| | |
| DEVICE=LANDLLDD.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANDLLDD.SYS=
| |
| Lan Manager's common dll device driver.
| |
| | |
| DEVICE=LANDLLDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANMSGDD.OS2=
| |
| Writes a log named LANTRAG.LOG into drive:\IBMCOM. This file will contain any messages (such as errors) generated via LANMSGDD.OS2.
| |
| | |
| DEVICE=C:\IBMCOM\LANMSGDD.OS2 <parameter>
| |
| | |
| '''Parameters'''
| |
| | |
| * /I:C:\IBMCOM /S
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANPDD.OS2=
| |
| Part of MPTS. It enables the NetBIOS and the IEEE 802.2 Protocols to OS/2 Programs. It loads also support for the LAN Virtual Device Driver ( Lanvdd.os2 ).
| |
| | |
| DEVICE=C:\Ibmcom\Protocol\Lanpdd.OS2
| |
| | |
| DEVICE=drive:\IBMCOM\LANMSGDD.OS2 /I:drive:\IBMCOM /S
| |
| | |
| Writes a log named LANTRAG.LOG into drive:\IBMCOM. This file will contain any messages (such as errors) generated via LANMSGDD.OS2.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=LANPDD.SYS=
| |
| Lan Manager's kernel device driver.
| |
| | |
| DEVICE=LANPDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANVDD.OS2=
| |
| Part of MPTS. It is the LAN Virtual Device Driver. It enables the NetBIOS and the IEEE 802.2 Protocols to Dos and Windows Programs.
| |
| | |
| DEVICE=C:\Ibmcom\Protocol\LANVDD.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LANVDD.SYS=
| |
| DOS Lan Manager's virtual device driver.
| |
| | |
| DEVICE=LANVDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=LANVMEM.SYS=
| |
| LAN Virtual DOS Driver, needed when using an specific DOS to be started.
| |
| | |
| DEVICE=LANVMEM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LDCOPY.SYS=
| |
| Simple OS/2 driver for copying files while CONFIG.SYS is being processed by [[Bob Eager]].
| |
| | |
| DEVICE=LDCOPY.SYS
| |
| | |
| '''Parameter:'''
| |
| * sourcefile destinationfile
| |
| | |
| '''Note:''' The driver can appear several times in the config.sys, thats not a fault.
| |
| http://www.tavi.co.uk/os2pages/ldcopy.html
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LNE100.OS2=
| |
| Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4).
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/liteon.zip.
| |
| | |
| DEVICE=LNE100.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LNEPCI.OS2=
| |
| Linksys LNEPCI/LNE100TX Ethernet Adapter.
| |
| | |
| DEVICE=LNEPCI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LOG.SYS=
| |
| This driver enables logging of system error messages and some application error messages.
| |
| | |
| note: You need also logdaem.exe
| |
| | |
| DEVICE=C:\OS2\LOG.SYS <parameters>
| |
| | |
| '''Parameters:'''
| |
| | |
| * /E:value
| |
| This sets up the log buffer size.
| |
| Value can be in the range from 4 to 64 .
| |
| Default = 8
| |
| This value is expressed in Kbytes.
| |
| | |
| * /A:value
| |
| This is the size of the alarm buffer.
| |
| Value can be in the range from 4 to 64 .
| |
| Default = 8
| |
| This value is expressed in Kbytes.
| |
| | |
| * /OFF
| |
| If set to OFF the driver is installed but the logging of error messages is turned off. You can turn it on again with the program Syslog.
| |
| | |
| See the examples below.
| |
| | |
| To install the log driver with a log buffer size of 48 Kbytes and an alarm buffer of 16 Kbytes, add this line to your config.sys file: DEVICE=C:\OS2\LOG.SYS /E:48 /A:16
| |
| | |
| To install the log driver but turn it off after initialization use this line:
| |
| DEVICE=C:\OS2\LOG.SYS /OFF
| |
| | |
| '''NOTE:''' LOG.SYS has its limitations. It will not log an application error unless the application has been written to make use of LOG.SYS. Some routine system errors will not log either because OS/2 opens an error message box on screen to report these.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LPT49.SYS=
| |
| Devicedriver out of the LPT49.ZIP package available for free at http://www.kellergroup.com.
| |
| | |
| The LPT49 utility includes a device driver (LPT49.SYS) and command file (LPT49.CMD) for creating additional LPT ports on your system (LPT4 through LPT9). You can then install the fax printer object on any of these LPT ports. You can also create multiple fax printer objects on different LPT ports (set on the Output page of the printer object's Settings notebook), and each printer object can have different job properties (set with the Job properties button on the Printer driver page of the printer object's Settings notebook). Keller Group Inc. is the developer of PMFax and Faxworks.
| |
| | |
| DEVICE=LPT49.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LPTDD.SYS=
| |
| This driver allows a DOS session to print to an LPT port that has been redirected (or captured) to a network printer.
| |
| | |
| DEVICE=C:\OS2\Mdos\Lptdd.sys
| |
| | |
| '''Parameter:'''
| |
| * -T:ss
| |
| Specifying the timeout value on send/receive (default 10 seconds). If using slow media (diskette), or when LPTool is used on a very busy system, increase this for reliable operation.
| |
| | |
| * -P:n
| |
| Specifying the LPT port-address to use (default is 1 for using 0378). Use LPTDD.CMD to define the correct n.
| |
| | |
| The FREE LPTool is developed by Jan van Wijk available at http://www.fsys.demon.nl
| |
| | |
| '''TIP:''' Together with e.g. the great FileCommander/2 by [[Brian Harvard]] create a user-menue entry that sends the current directory to the connected Computer for an easy use.
| |
| | |
| Example:
| |
| S: Copy to Remote via parallel port
| |
| D:\TOOLS\LPTOOL\LPTOOL send
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LRCOM.SYS=
| |
| Linkright serial port driver.
| |
| LinkRight is a serial and parallel port file transfer utility for OS/2.
| |
| | |
| DEVICE=LRCOM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LRPAR.SYS=
| |
| Linkright parallel port driver.
| |
| LinkRight is a serial and parallel port file transfer utility for OS/2.
| |
| | |
| DEVICE=LRPAR.SYS
| |
| | |
| '''Parameters:'''
| |
| * /Q:7 uses IRQ7 or /Q:5 uses IRQ5.
| |
| These are the only IRQs supported. Interupt driven mode can only be used if PRINT01.SYS or PRINT02.SYS also uses the same interupt. If no /Q option is selected, polled is assumed.
| |
| | |
| * /P
| |
| is for polled. This is a useless option, since it is the default.
| |
| | |
| * /A:3BC or /A:378 or /A:278
| |
| select the address of the LPT port for LinkRight to use. If this parameter is used, only one address can be specified. Then, when you select Connect from the LinkRight menu, no matter which LPT port you select, either LPT1, LPT2 or LPT3, LinkRight will use the address specified. If this parameter is not included, LinkRight reads the BIOS info at bootup time to get the LPT addresses.
| |
| | |
| * /M
| |
| is to specify MicroChannel machines. For some MicroChannel systems when booted from bootable floppies, LinkRight would not see that it was MicroChannel and would assume an ISA bus. This caused the driver to fail. So if you boot your MicroChannel system from floppies
| |
| and the LinkRight driver displays a message at bootup time saying an ISA bus was found, use this parameter to fix the problem.
| |
| | |
| The preferred and suggested mode of use is no parameters on the LRPAR.SYS line in CONFIG.SYS. You can add parameters if there are any problems.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LSL.SYS=
| |
| This is the Link Support Layer driver. It is the lowest layer in the Novell Open Data Link Interface model and is required for the requester.
| |
| | |
| DEVICE=C:\Netware\Lsl.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LTMDMOS2.SYS=
| |
| Lucent Technologies Modem Driver.
| |
| An older V. 5.55 Beta 3 is available for FREE at http://www.drmartinus.de/notebook2/notebook.htm
| |
| | |
| DEVICE=LTMDMOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=LXAPI32.SYS=
| |
| Radio/TV driver for BT878 based cards.
| |
| The LXAPI32.SYS is a common linux services driver. It provides functions for PCI,I2C,memory,resources with linux function calls.
| |
| | |
| DEVICE=LXAPI32.SYS
| |
| | |
| '''Parameter'''
| |
| * /NOPCINAMEDEVICE
| |
| necessary if a trap on boot occurs
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose: Show Copyright information
| |
| * /VM
| |
| Verbose modules: Like /V plus module list
| |
| * /3
| |
| Execute an INT3 at initialisation (Use kernel debugger!)
| |
| * /NOMODULE
| |
| Don't load modules at system startup (Use BT32CFG.EXE to load/unload)
| |
| * /NOCOREMODULE
| |
| Don't load core modules at system startup (Use BT32CFG.EXE to load/unload)
| |
| * /MODPARM:
| |
| Support Linux insmod parameters for various modules | |
| * /LOADMODULE:
| |
| Load module (only with parameter /NOCOREMODULE)
| |
| * /NOPCINAMEDEVICE
| |
| Don't load and parse PCI.IDS file to prevent a system trap with driver SEG32.SYS (32Bit Security Driver of AVP/2)
| |
| | |
| '''NOTE:'''
| |
| This driver is the base linux api layer driver for ported drivers. It must reside before all other drivers that attaches to LXAPI32. Currently there is only BT32.SYS available.
| |
| | |
| '''NOTE:'''
| |
| LXAPI32.SYS contains the following modules:
| |
| * timer
| |
| * pci_core
| |
| * i2c_core
| |
| * videodev
| |
| | |
| '''NOTE:'''
| |
| Module parameters:
| |
| ------------------
| |
| timer
| |
| pci_core dopcifixups=n disable/enable corresponding
| |
| dopcienable=n pci functions in pci_core
| |
| dopcisetmaster=n n is 0 or 1
| |
| dopcisetpowerstate=n
| |
| dopciupdateresource=n
| |
| dopciresourcesurvey=n
| |
| i2c_core
| |
| videodev
| |
| | |
| All dopci* parameters defaults to 0 because they aren't really needed in OS/2 and caused some problems.
| |
| | |
| Here is an example for using the /MODPARM parameter:
| |
| /MODPARM:pci_core:dopcifixups=1;dopcienable=1
| |
| This will enable dopcifixups and dopcienable.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MACFH.OS2=
| |
| Part OS/2 Virtual LAN Kernel.
| |
| | |
| DEVICE=MACFH.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MACMYWI.OS2=
| |
| ISDNPM Support Driver.
| |
| DEVICE=MACMYWI.OS2
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MAESTR2E.SYS=
| |
| AudioDrive Maestro-2E OS/2 Driver modified by [[Daniela Engert]]
| |
| | |
| DEVICE=MAESTR2E.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MD5.SYS=
| |
| Used by the Firewall built into TCP/IP 4.1 and above. This driver adds MD5 encryption to the Firewall. Device driver used by the IBM TCP/IP Firewall to impliment MD5 encryption. Part of the TCP/IP Ver. 4.1/4.2/4.21 firewall. This is RSA's message digest algorithm used to provide authentication and integrity verification.
| |
| | |
| DEVICE=C:\Mptn\Potocol\MD5.sys
| |
| | |
| There are several tools to configure the firewall:
| |
| * Zampa:
| |
| * ServerConfig: http://www.michelinakis.gr/Dimitris/sc/index.html
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=MEDIAOS2.SYS=
| |
| MediaDrive OS/2 Device Driver. The MediaDrive is an internal PCCARD-Drive for Workstations. Useful e.g. for Digital-Cameras.
| |
| Available at http://www.altec-computersysteme.com
| |
| | |
| DEVICE=MEDIAOS2.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V | |
| Verbose
| |
| | |
| * /B:XXX
| |
| Basisadress at XXX e.g. 170
| |
| | |
| '''Limitations:'''
| |
| | |
| The driver can only read/write FAT formatted ATA & SRAM PC Cards.
| |
| With OS/2 only the lower slot can be used.
| |
| Must be the only drive attached to the IDE-Controller.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MEIO0437.SYS=
| |
| Driver for the MWAVE Modem for IBM Thinkpads.
| |
| | |
| DEVICE=MEIO0437.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MEMMAN.OS2=
| |
| Lan Manager's memory manager for Dos/Windows mode operation. Left over from old code to provide compatibility. Not needed for normal operations.
| |
| | |
| DEVICE=MEMMAN.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MIDI.SYS=
| |
| RTMIDI helper driver. Is used by your Soundcard, but RTMIDI will work only if your Soundcard supports RTMIDI with the audio driver.
| |
| | |
| DEVICE=C:\OS2\Boot\Midi.sys
| |
| | |
| '''TIP:''' For working with Midi there is the MIDI Station Sequencer: http://www.dinosoft.it/~midistation/index.html
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MODISK.DMD=
| |
| MO device driver from Fujitsu.
| |
| | |
| DEVICE=MODISK.DMD
| |
| | |
| '''Parameters'''
| |
| | |
| * /Rn or /R:n
| |
| (Number of reserved drives) 'n' is a number between 1 and 10. Default is 1. A series of logical drive names can be reserved for each MO drive for future partitioning. If the number of valid partitions exceeds the number specified /R option, and if /S option is not specified, up to 16 partitions are allowed.
| |
| * /S
| |
| (Reserved drive priority) No more logical drives than the number of /R option is assigned. When the number of reserved drives specified with the /R option is fewer than the number of valid partitions on a disk, the number of reserved drives takes priority. For example, if there are four valid partitions on the disk and the number of reserved drives is specified at 3, a logical drive name cannot be assigned to the fourth partition, and hence it cannot be accessed.
| |
| | |
| * /I {h:} m {[n]} {+-{h:} m {[n]}}+-...
| |
| (Specify the drive ID) This parameter specifies the target MO drive by the host adapter number and SCSI-ID number. If this option is not used, all accessible MO drives are used by default. h is the host adapter number (between 0 and 9). The default is 0. m is the SCSI-ID number (0 to 7). n is the number of reserved drives. When 'n' is omitted, the value specified with the /R option is used.
| |
| | |
| * /U:{IDE adapter name}
| |
| (Required, specify IDE adapter driver) This parameter is not optional but required both for ATAPIMO.FLT and MODISK.DMD. You must specify same name for these two drivers. Usually '/U:ST506_HardDrive' works fine if 'IBM1S506.ADD' or 'IBM2S506.ADD' is used as IDE adapter driver.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MODISK.SYS=
| |
| Magneto Optical Device Driver.
| |
| | |
| DEVICE=MODISK.SYS
| |
| | |
| Disk Types Supported
| |
| - 3.5 inch MO disk
| |
| - Sector size: 512 bytes or 2048 bytes
| |
| - Capacity: 128 MB, 230 MB, 540 MB or 640 MB
| |
| | |
| '''NOTE:''' When using MODISK.SYS you have to delete or REM OPTICAL.DMD (Warp 4) or OPTICAL.SYS (Warp 3)
| |
| '''NOTE:''' There is also a MODISK.SYS for SCSI by Fujitsu who supports also 1.3 GB drives. For Parameters see MODISK.DMD
| |
| | |
| '''NOTE:''' Better use the /of switch together with OS2DASD.DMD (or DANIDASD.DMD). In this case make shure that the MODISK.SYS is not loaded.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MONMOU01.SYS=
| |
| Serial Touchscreen Controller on PC-Bus System
| |
| | |
| DEVICE=MONMOU01.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller.
| |
| | |
| matches the jumper settings on the controller.
| |
| | |
| matches the interrupt jumper on the controller.
| |
| | |
| '''NOTE:''' Disabling the COM Drivers
| |
| If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.
| |
| | |
| '''NOTE:''' If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MONMOU02.SYS=
| |
| Serial Touchscreen Controller on PS/2 System
| |
| | |
| DEVICE=MONMOU02.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller.
| |
| | |
| matches the jumper settings on the controller.
| |
| | |
| matches the interrupt jumper on the controller.
| |
| | |
| '''NOTE:''' Disabling the COM Drivers
| |
| If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.
| |
| | |
| '''NOTE:''' If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MONMOU03.SYS=
| |
| PC-Bus and MicroChannel Touchscreen Controller
| |
| | |
| DEVICE=MONMOU03.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| where is: 4035 for the IntelliTouch E281-4035 PC-Bus controller. 4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers. 2201 for the AccuTouch E271-2201 PC-Bus con troller. 141 for the AccuTouch E271-141 PC-Bus controller.
| |
| | |
| matches the jumper settings on the controller.
| |
| | |
| matches the interrupt jumper on the controller.
| |
| | |
| '''NOTE:''' Disabling the COM Drivers
| |
| If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.
| |
| | |
| '''NOTE:''' If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MOUSE.SYS=
| |
| Provides support for your mouse. You need also the Pointdd.sys installed.
| |
| | |
| DEVICE=C:\Os2\Boot\Mouse.sys <parameter>
| |
| | |
| Lets you use a mouse or track ball. This line also identifies the device dependent type of mouse you have and which COM port it is on. In this case, the device dependent mouse driver is loaded in your OS/2 CONFIG.SYS through a standard "DEVICE=" line, before the MOUSE.SYS driver is loaded, and then on the MOUSE.SYS line there is the parameter "TYPE=", with a reference to the device name of the device. QSIZE is a number from 1 to 100 which indicates how many mouse actions are to be saved when you execute mouse actions faster than your system can handle them. There is also a RELAXED parameter which you would place after QSIZE. It can be used with any mouse when the pointer is jumping randomly about the screen. IBM does not suggest you use this parameter unless you are experiencing this problem.
| |
| | |
| '''ATTENTION:''' Together with an device independent Mouse (e.g. a IBM PS/2 Mouse) NO PARAMETERS are needed.
| |
| | |
| The supported device dependent Types are:
| |
| | |
| * PCLOGIC$ for Genius, Logitech, PC Mouse Systems, Driver: PCLOGIC.SYS
| |
| * MSBUS$ for Microsoft Bus-Mouse, Driver: NONE
| |
| * MSINP$ for Microsoft-Inport, Driver: NONE
| |
| * VISION$ for Visi-On: Driver: VISION.SYS
| |
| * ELOMOU$ for ELO Touchscreen Driver:MONMOU0x.SYS (x=1, 2 or 3)
| |
| * SUMMA$ for SUMMA Tablet Driver:SUMMA.SYS
| |
| * GRAPHIR$ for WACOM Tablet Driver: GRAPHIRE.SYS
| |
| | |
| '''NOTE:''' The MOUSE.SYS statement must come before COM.SYS, but after POINTDD.SYS, because COM.SYS will take over any unused COM port. If COM.SYS takes over the COM ports before MOUSE.SYS is loaded, MOUSE.SYS will not have any COM ports available, thus no mouse support.
| |
| | |
| '''TIP:''' If you have a so called scroll-mouse (e.g. from IBM, or Logitech) get the scrollms.exe package from the OS/2 Device Driver Pack. Or use the scrollmouse driver from http://os2.ru/projects/scrollmouse, who uses a second wheel horizontal not only vertical.
| |
| If you want to have a 'scrolling-feature' with normal mice there is the FREE hots11.zip package by [[Samuel Audet]] from http://WWW.CAM.ORG/~guardia/programs.html. See also AMOUSE.SYS
| |
| | |
| '''TIP:''' If you want to have animated mouse pointers (very nice); [[Christan Langanke]] has developed a FREE Version to get as AMPTR101.ZIP
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MOUSE2.SYS=
| |
| Driver for the Trackpoint of IBM Thinkpads
| |
| | |
| DEVICE=MOUSE2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=MPU401.SYS=
| |
| Provides support for the MPU401 connector on your soundcard.
| |
| | |
| DEVICE=C:\Os2\Boot\MPU401.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /Pn:hhh
| |
| Basis I/O (Port) Address.
| |
| | |
| * /In:ddd
| |
| Interrupt Level. With the Theta Band driver it can be set to 0 so TIMER0 is used during record.
| |
| | |
| * /N:sss
| |
| Name of the driver. Default is MPU401$
| |
| | |
| * /R:ddd
| |
| TIMER0 resolution in milliseconds. Default 2.
| |
| | |
| * /V
| |
| Verbose
| |
| | |
| * /O:sss
| |
| Options
| |
| | |
| * L or LONGNAME - Long RTMIDI Names
| |
| * QUIETINI - Ignore Initialization errors
| |
| * NORMIO Do not check/register I/O addresses with RM
| |
| * SHAREDIO Check/register I/O adresses as shared
| |
| * MULTIO Check/register I/O adresses as multiplexed
| |
| * NORMIRQ Do not check/register IRQ's with RM
| |
| * SHAREDIRQ Check/register IRQ's as shared
| |
| * MULTIRQ Check/register IRQ's as multiplexed
| |
| * NOCHECKIO Do not verify I/O adresses
| |
| * NOCHECKIRQ Do not verify IRQ's
| |
| * NOTIMER0 Do not use TIMER0
| |
| * 10BITS Use 10-bit address width with RM
| |
| * 16BITS Use 16-bit adress width with RM
| |
| * ONLYONE Locate only one MPU401 device
| |
| * AUDIOVDD Enable DOS sharing (Only for Theta Band driver).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MVPRODD.SYS=
| |
| Driver for MediaVision's ProAudio Spectrum sound card. The first driver is set for IRQ 11, DMA 3 with Sound Blaster support on IRQ 5 and DMA 1.
| |
| DEVICE=MVPRODD.SYS
| |
| '''Warp TIP:''' MediaVison's technical support indicates that the only correct settings for the PAS 16 in Warp is IRQ 11 and DMA 3. If you are experiencing static or white noise during bootup, MediaVison indicates that this is caused by using an IRQ other than 11 and DMA 3. They also indicate that the two device driver lines must be the last lines in your config.sys file. Note that this information didn't solve the static problem for all users, but it did for some. Others have indicated that adding the /T:1 parameter solved their "white noise" problem.
| |
| | |
| '''Warp NOTE:''' There may be a bug in Warp which causes problems in WIN-OS2 "seamless" mode. A solution is contained in SNDWOR.ZIP.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MWAVEDD.SYS=
| |
| Driver for MWAVE Modem on IBM Thinkpads.
| |
| | |
| DEVICE=MWAVEDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MWAVEVDD.SYS=
| |
| Dos Driver for the MWAVE-DSP in Thinkpads.
| |
| | |
| DEVICE=MWAVEVDD.SYS
| |
| | |
| '''ATTENTION:''' The MWAVEVDD.SYS must placed before VEMM.SYS.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=MXNICF.OS2=
| |
| Macronix MX987xx Family, Edimax EN9120 Family, DFE-540TX Fast Ethernet PCI Adapters.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/
| |
| | |
| DEVICE=MXNICF.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=N100.OS2=
| |
| Compaq Fast Ethernet and Gigabit NDIS driver
| |
| | |
| DEVICE=N100.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NE2000.OS2=
| |
| Eagle Technology NE2000plus Ethernet Adapter.
| |
| | |
| DEVICE=NE2000.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NETBEUI.OS2=
| |
| This is the NetBIOS protocol driver.
| |
| | |
| DEVICE=C:\Ibmcom\Protocol\NETBEUI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NETBIOS.OS2=
| |
| This is the NetBIOS API driver.
| |
| | |
| DEVICE=C:\Ibmcom\Protocol\NETBIOS.OS2
| |
| | |
| | |
| '''TIP:''' By Roland Sambain. The conventions wisdom about IFS statements coming at the beginning of config.sys seems not to apply. i.e. for netbios to load correctly the device statement must comes before the NETWKSTA.200 IFS.
| |
| | |
| '''Netbios and Gigsabit adapters'''
| |
| | |
| Due to the Nature of NetBIOS, it has some limitations to work on Gigabit adapters with requires some adjustments to MPTS settings.
| |
| | |
| '''Explanation:'''
| |
| NetBIOS can not work with large Ethernet frame sizes which are used by default with Gigabit Ethernet adapters. Both transfer and receive buffer sizes should be set to 1024 bytes and USEMAXDATAGRAM set to "NO". The DIX 2.0 protocol type (ETHERAND_TYPE) should be set to "D".
| |
| | |
| Procedure to change settings
| |
| # From MPTS select 'Configure'
| |
| # In 'Current Configuration' find the "IBM 1000BaseT Gigabit Ethernet Adapter" and press 'Edit'
| |
| # Set 'Receive Buffer Size' = 1024
| |
| # Set 'Transmit Buffer Size' = 1024
| |
| # Select OK
| |
| # In 'Current Configuration' find the "IBM OS/2 NETBIOS" and press 'Edit'
| |
| # Set 'Type of Ethernet driver support = "D"
| |
| # Set 'Full buffer datagrams' = "NO"
| |
| # Select OK
| |
| # Select 'Exit' MPTS.
| |
| # Reboot
| |
| | |
| The other possibility is to use "IBM OS/2 NETBIOS OVER TCP/IP". You might want to try this and compare the results to native NetBIOS.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NETBIOS.SYS=
| |
| Loads support for the NETBIOS protocol.
| |
| | |
| DEVICE=NETBIOS.SYS
| |
| | |
| '''TIP:''' If you do not use NETBIOS applications, you can remove the NETBIOS driver from the config.sys and the NETBIOS section from the PROTOCOL.INI to remove some of the confusion this creates. You should also remove the virtual netbios drivers at the same time since these bind onto the NETBIOS driver and not the LM10 interface (which is why they appear after the NETWKSTA.SYS driver, so it can "eat" its resources first, then what is left over is assigned to NETBIOS.SYS). [<- Note: this should be NETBIOS.OS2] (The mentioned virtual NETBIOS drivers are \IBMCOM\PROTOCOL\LANPDD.OS2 and LANVDD.OS2)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NETFLX3.OS2=
| |
| OS/2 NDIS 2 Driver for Compaq NetFlex-3/Netelligent Controllers.
| |
| | |
| DEVICE=NETFLX3.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NGUEST2.SYS=
| |
| NetOp driver. NetOp is a family of remote contral products which support multiple operating systems and various communication interfaces.
| |
| | |
| DEVICE=NGUEST2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NHOST2.SYS=
| |
| NetOp driver. NetOp is a family of remote contral products which support multiple operating systems and various communication interfaces.
| |
| | |
| DEVICE=NHOST2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NHOST2W.SYS=
| |
| NetOp driver. NetOp is a family of remote contral products which support multiple operating systems and various communication interfaces.
| |
| | |
| DEVICE=NHOST2W.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| | |
| =DEVICE=NMPIPE.SYS=
| |
| This driver provides Named Pipes support on the Netware client.
| |
| | |
| DEVICE=C:\Netware\NMPIPE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NOVAQOS2.SYS=
| |
| Driver for backup-software from NOVABACK.
| |
| | |
| DEVICE=NOVAQOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NOVASPI.SYS=
| |
| Driver for backup-software from NOVABACK.
| |
| | |
| DEVICE=NOVASPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NPSERVER.SYS=
| |
| This driver allows your workstation to function as a Named Pipes Netware server.
| |
| | |
| DEVICE=C:\Netware\NPSERVER.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NTR2000.SYS=
| |
| ODI (Netware) driver for Token Ring network adapter cards.
| |
| | |
| DEVICE=C:\Netware\NTR2000.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NTRACE.OS2=
| |
| Goldencode Network Trace (http://www.goldencode.com).
| |
| | |
| DEVICE=NTRACE.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=NULLNDIS.OS2=
| |
| IBM NULL MAC-driver. Installed if you have NO Network Adapter.
| |
| | |
| DEVICE=NULLNDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NVC.SYS=
| |
| This is a "Smart Behavior Blocker for DOS" from Norman antivirus.
| |
| Basically a shield running in dos-boxes and similar to protect from possible virus "sneak attacks".
| |
| | |
| DEVICE=NVC.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=NWREQ.SYS=
| |
| This is the main Netware requester module and must appear in config.sys after the NmPipe.sys , Ipx.sys and Spx.sys drivers.
| |
| | |
| DEVICE=C:\Netware\Nwreq.sys
| |
| | |
| <b>Platform Support:</b>
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ODI2NDI.SYS=
| |
| This driver allows the Netware client to use MPTS as the interface to a network adapter driver and in turn, the LAN.
| |
| | |
| DEVICE=C:\Netware\Odi2Ndi.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OPL3.SYS=
| |
| Is used by soundcards with an OPL3 sound chip.
| |
| | |
| DEVICE=C:\Os2\Boot\Opl3.sys
| |
| | |
| '''Parameter:'''
| |
| | |
| * /P:nnn
| |
| Base I/O: Sets the base I/O address for FM device.
| |
| Is almost always, 388 (nnn is in hex)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OPL3SA.SYS=
| |
| It is used by Soundcards with Yamaha SAx sound chips.
| |
| | |
| DEVICE=C:\Mmos2\Opl3sa.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OPL3VDD.SYS=
| |
| It is used by Soundcards with Yamaha SAx sound chips. It provides support for DOS sessions.
| |
| | |
| DEVICE=C:\Mmos2\OPL3VDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=OPL4D.SYS=
| |
| Yahama Fm Sythesis OPL4 MIDI Driver.
| |
| | |
| DEVICE=OPL4D.SYS
| |
| | |
| '''Parameter:'''
| |
| * /P:xxx
| |
| Midiport Address, 300, 310, 330 or 388 (default)
| |
| | |
| * /N:OPL41$
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| | |
| =DEVICE=OPTICAL.DMD=
| |
| New with Warp4 Device Manager for Optical devices like MO.
| |
| | |
| DEVICE=OPTICAL.DMD
| |
| | |
| '''TIP:''' If you have removable media drives (MO, IOMEGA, SYQUEST and others) look at http://rheooptik.fmf.uni-freiburg.de/www/faq/remmedia.htm for a detailed removable media FAQ.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OS2CDROM.DMD=
| |
| Provides support for IDE CDRom drives. It is a device manager driver.
| |
| | |
| '''Note:''' To get CDRom support in OS/2 you must also install Ibm1s506.add and Ibmidecd.flt .
| |
| | |
| BASEDEV=Os2cdrom.dmd parameters
| |
| | |
| '''Parameters:'''
| |
| | |
| * /V
| |
| Displays some information about your CDRom drive during the boot.
| |
| | |
| * /Q
| |
| Stops displaying error messages during the boot.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OS2.SYS=
| |
| This is a driver for the Iomega ZIP-100 drives. It works only with the older models.
| |
| | |
| DEVICE=C:\oad\OS2.sys
| |
| | |
| These drivers only work for Iomega SCSI adapters and the Parallel Port version of the Zip 100 drive.
| |
| Attention: Newer Parallel Port Versions of the Zipdrive don't work.
| |
| See also BASEDEV PPAOS2.ADD which should work with all parallel port ZIP-drives (100, 100+ and 250)
| |
| | |
| | |
| '''Advantages:'''
| |
| | |
| Fast without requiring the disk to be locked into the drive as a fixed disk.
| |
| Compatible with the format that the disks come with from the factory.
| |
| Currently the only option for PP drive users.
| |
| | |
| | |
| '''Disadvantages:'''
| |
| | |
| Doesn't work with non-Iomega SCSI adapters.
| |
| Only allows one device to be attached to your SCSI adapter.
| |
| There have been reports of problems copying files that have large EAs and these drivers.
| |
| Drivers must be placed in a subdirectory named drive:\OAD on the boot drive.
| |
| | |
| '''NOTE:''' Iomega SCSI versions of Jaz and Zip Drives can be used as backup devices with Seagate Backup Exec for OS/2 Warp. Cartridges used for backup will be reserved solely for backup use. For these devices, you must format the cartridges with the OS/2 format command from a command prompt. This format may fail if the Iomega drivers are loaded in the config.sys. If so, try commenting out the drivers, reboot, and try the OS/2 format again. Once the OS/2 format is complete, the Iomega drivers can be uncommented and there should be no further problem.
| |
| | |
| '''TIP:''' Together with HPFSREM.ZIP and - if you want a GUI - HPFSPM12.ZIP
| |
| the drives can also formatted using HPFS. Both packages are available for FREE at:
| |
| http://rheooptik.fmf.uni-freiburg.de/pub/os2/drivers/removables/00-index.html
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OS20MEMU.SYS=
| |
| OS20MEMU is a Memory Analyser for OS/2 (IBM EWS).
| |
|
| |
| DEVICE=OS20MEMU.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OS2EASY.SYS=
| |
| Altec EASY DRIVE. http://www.altec-computersysteme.com
| |
| | |
| DEVICE=OS2EASY.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Set Verbose Mode on
| |
| * /B:XXX
| |
| Set Base Adress to XXX e.g. 170
| |
| | |
| '''NOTE:''' Currently only one slot supported, the standard format command is unsupported, no API to get direct access to the meory media.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=OS2OGL.SYS=
| |
| Pentium Pro optimised Open GL Driver.
| |
| | |
| DEVICE=OS2OGL.SYS
| |
| | |
| '''NOTE:''' For OpenGL to utilize the device driver on PentiumPro systems, an environment variable, SET OGL_VIDEO_MEM_SIZE, must be set. The suggested place to set OGL_VIDEO_MEM_SIZE is in the config.sys, alternately, it can be set in an OS/2 Window before an OpenGL program is started. For either method, OGL_VIDEO_MEM_SIZE should be set to the total memory size (in megabytes) of the PCI graphics card. For example, using a graphics card with 4MB of memory, "SET OGL_VIDEO_MEM_SIZE=4" should be used.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=P6K7MTRR.SYS=
| |
| A simple interface physical device driver(PDD) that can manage memory Type Range Registers(MTRRs) of Intel P6* / AMD K7** series processors. Programmer can query/modify any MTRR settings via DosDevIOCtl() API, from non-Ring0 privileges. A sample executable, VFBWC.exe, using P6K7MTRR.sys, sets MTRR write-combining strategy to video frame buffer aperture. It can often improve graphic performance, especially DIVE. By [[Takayuki 'January June' Suwa]] (jjsuwa@sys3175.com)
| |
| | |
| DEVICE=P6K7MTRR.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=P9100.sys=
| |
| Is used by graphiccards with a Weitek P9100 chip.
| |
| | |
| DEVICE=C:\Os2\Boot\P9100.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PANEL.SYS=
| |
| PANEL is a small OS/2 device driver that gives access to the small (eight character) information panel on the front of the PS/2 Model 95 series of systems (and possibly others).
| |
| Available for FREE at http://www.tavi.co.uk/os2pages/index.html
| |
| | |
| DEVICE=PANEL.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PARADISE.SYS=
| |
| Driver for the Paradise mixer for all Crystal CS423x soundcards using a mode-3 driver.
| |
| | |
| DEVICE=PARADISE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PAUSE.SYS=
| |
| | |
| DEVICE=PAUSE.SYS
| |
| | |
| '''Parameter:'''
| |
| * /W:NNN
| |
| Where: NNN = seconds to wait (default = 30 seconds)
| |
| | |
| Pauses the config.sys for a given time. Useful for maintenance purposes.
| |
| The driver can be found at the IBM Device Driver Pak Online site.
| |
| | |
| '''TIP:''' Together with BASEDEV=IBM1S506.ADD the /W parameter does the same.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PC.SYS=
| |
| Driver from Process Commander by Stardock.
| |
| | |
| DEVICE=PC.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PC100.OS2=
| |
| Linksys EtherFast 10/100 PC Card. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip.
| |
| | |
| DEVICE=PC100.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PCCOM2.SYS=
| |
| PCCOM 2 PORT Card Device driver.
| |
| | |
| DEVICE=PCCOM2.SYS
| |
| | |
| '''Parameter:'''
| |
| * /Axxx,yyy
| |
| card I/O address; port1=xxx, port2=yyy
| |
| | |
| * /Imm,nn
| |
| IRQ Nø; IRQ1=mm, IRQ2=nn
| |
| | |
| * /Cxx
| |
| Assign the port number of the first port on the card ( COM1 to COM98 )
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PCCOM4.SYS=
| |
| PCCOM 4 PORT Card Device driver.
| |
| | |
| DEVICE=PCCOM4.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| /Axxx : card address
| |
| | |
| /Ixx : IRQ Nø
| |
| | |
| /D : compatible mode: COM1 and COM2 ( same as PC COM ). Use COM.SYS ( from IBM) for these 2 ports and PCCOM4.SYS for other ports. This option must be put to the front of all other options.
| |
| | |
| /Cxx : Assign the port number of the first port on the card ( COM1 to COM96 )
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PCCOM8.SYS=
| |
| PCCOM 8 PORT Card Device driver.
| |
| | |
| DEVICE=PCCOM8.SYS
| |
| | |
| '''Parameter:'''
| |
| * /Axxx,xxx
| |
| Address of the card, following of vector address( without any space ! )
| |
| * /Ixx
| |
| IRQ Nø
| |
| * /Cxx
| |
| Assign the port number of the first port on the card ( COM1 to COM92 )
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=PCIND.OS2=
| |
| NDIS driver for RealTek RTL-8029 based NE2000-combatible cards.
| |
|
| |
| DEVICE=PCIND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCIOS2.SYS=
| |
| ODI driver for RealTek RTL-8029 based NE2000-combatible cards.
| |
| | |
| DEVICE=PCIOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCKBD.SYS=
| |
| Process Commander Keyboard driver.
| |
| The PCKBD line lets full-screen Process Commander be invoked, even when the customized KBDBASE.SYS is not being used.
| |
| | |
| DEVICE=PCKBD.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * KEYB:CA-A
| |
| | |
| For getting it to work with FP13 and up see:
| |
| http://www.scoug.com/os24u/2001/scoug003.mrkia.html
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCLOGIC.SYS=
| |
| Provides mouse support for Genius, Logitech, PC Mouse Systems.
| |
| | |
| DEVICE=PCLOGIC.SYS
| |
| | |
| '''ATTENTION:''' Must reside between POINTDD.SYS and MOUSE.SYS.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCM2FLSH.SYS=
| |
| PCMCIA Storage Driver for OS/2 (FLASH).
| |
| | |
| DEVICE=PCM2FLSH.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCM2SRAM.SYS=
| |
| PCMCIA Storage Driver for OS/2 (SRAM).
| |
| | |
| DEVICE=PCM2SRAM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCMNICCS.OS2=
| |
| IBM Ethernet Adapter (PCMCIA) driver.
| |
| | |
| DEVICE=PCMNICCS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCMSSDIF.SYS=
| |
| PCMCIA Storage Driver for OS/2 (Interface).
| |
| | |
| DEVICE=PCMSSDIF.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PCNTND.OS2=
| |
| AMD PCNet Ethernet Family Adapter driver.
| |
| | |
| DEVICE=PCNTND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PDITOU01.SYS=
| |
| See DEVICE TOUCH.SYS.
| |
| | |
| DEVICE=PDITOU01.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE)PDITOU02.SYS=
| |
| See DEVICE TOUCH.SYS.
| |
| | |
| DEVICE)PDITOU02.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| | |
| =DEVICE=PENCC.SYS=
| |
| Pen for OS/2 Device Driver for CalComp 3300.
| |
| | |
| DEVICE=PENCC.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PENDD.SYS=
| |
| Wacom IV and V Tablet driver by Masami Kitamura.
| |
| | |
| DEVICE=PENDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PMAC.OS2=
| |
| SSW-Parallelportdriver for Adapter without NIC.
| |
| | |
| DEVICE=PMAC.OS2
| |
| | |
| If there is an printer also connected to the parallel port there must be the BASEDEV=PRINT01(or 2).SYS /IRQ set. To switch between PMAC and Printer got to the drive:/IBMCOM directory and execute PMAC.EXE -R. To reestablish connection with PMAC type PMAC.EXE -C.
| |
| | |
| '''JERRY ROWE's WARP REMOTE INSTALL PAGE'''
| |
| | |
| This page is a preliminary FAQ about installing OS/2 Warp 4 over a laplink cable from a Server to a Client.
| |
| | |
| First, you must set the Server up to use the parallel port (SSW Parallel MAC driver) network driver. You do this from MPTS [just type MPTS at the command line]. Select the driver, and add Netbios as a protocol.
| |
| | |
| Then Edit the SSW Parallel MAC driver in MPTS and Note its address. It should be 40000000000A.
| |
| | |
| Then open up the OS/2 Warp Remote Install object. Create the remote install disks. Be sure to use the same SSW Parallel MAC driver.
| |
| | |
| Then edit the protocol.ini file on the 2nd disk. Inside it, insure that the MAC address is something other than 40000000000A. Using 40000000000B will work fine.
| |
| | |
| Save the file.
| |
| | |
| Now, shutdown and reboot the machine.
| |
| | |
| Then examine \ibmcom\lantran.log and look for the reference to the Adapter # for the parallel port adapter. If you have another adapter in the Server, the number may be 1, otherwise it will be 0.
| |
| | |
| Find Server Adapter #
| |
| Note that the Adapter #=1 in the file below. If your parallel port is setup for adapter #=0, then lantran.log will be different.
| |
| ==file lantran.log=========================================
| |
| PARALLEL PORT MAC V 1.0 by Savant Software Inc. Copyright (C) 1994, 1995
| |
| SAVANT SOFTWARE: PORT ADDRESS(ES): LPT1
| |
| SAVANT SOFTWARE: PORT ADDRESS CONFIGURED: LPT1(378)
| |
| IBM LANVDD is loaded and operational.
| |
| IBM OS/2 LAN Netbind
| |
| IBM LANDD is accessing IBM 802.3 LAN Interface.
| |
| Adapter 1 was initialized and opened successfully.
| |
| Adapter 1 is using node address 40000000000A. The Token-Ring
| |
| format is 02000000
| |
| IBM LANDD was successfully bound to MAC: pmac_nif->VECTOR.
| |
| ==end file lantran.log=========================================
| |
| | |
| Install service.exe and other files.
| |
| | |
| If they were not installed during the Warp install, follow these instructions.
| |
| | |
| Given that my CDRom drive is I:, and My Warp 4 drive is H:, issue this command:
| |
| | |
| [H:\]I:\CID\SRVIFS\thinsrv /s:. /t:h:\cid\SRVIFS
| |
| /r:h:\ibminst\tables\service.ini /tu:h:\
| |
| | |
| THINSRV completed successfully.
| |
| | |
| This creates a line in startup.cmd and creates startup.cmd if necessary.
| |
| START H:\CID\SRVIFS\SERVICE.EXE /INI=SERVICE
| |
| | |
| Thinsrv also adds:
| |
| | |
| h:\cid\SRVIFS;
| |
| | |
| to the PATH and DPATH statements in CONFIG.SYS.
| |
| | |
| Because these changes will not take effect until a reboot, the command in STARTUP.CMD will not work until then.
| |
| | |
| However, you can:
| |
| | |
| cd \cid\srvifs service /ini=service
| |
| | |
| to start it right away from the command line.
| |
| | |
| You will probably want to remove the commands from Startup.cmd at this time to prevent the Server facility from running all the time.
| |
| | |
| You may also want to create another cmd file with the service command in it if you would like to run it interactively.
| |
| | |
| Edit h:\cid\service.ini
| |
| | |
| Note Alias's and Path near bottom. Should be correct for the CD Note Adapter #. Should match # from Lantran.log.
| |
| =============================================================
| |
| ;SRVIFS INI file for OS/2 Warp Remote Install Server - 7CPESGDV
| |
| Name = 7CPESGDV
| |
| GroupName = NO
| |
| Adapter = 1
| |
| MaxClients = 5
| |
| MaxFiles = 9999
| |
| ClientWorkers = 8
| |
| Path = I:\
| |
| Alias = ReadOnly,Single,CDROM,I:\
| |
| Alias = ReadWrite,Single,STATUS,H:\IBMINST\RSP\REMOTE
| |
| ==============================================================
| |
| | |
| With these changes made, shut down the computer and reboot. After it comes up, the GUI front end for the Remote install should work.
| |
| | |
| ===Config.sys on disk 1 ===================
| |
| CALL=A:\SRVATTCH.EXE z: \\7CPESGDV\CDROM
| |
| DEVICE=A:\SRVIFS.SYS
| |
| IFS=A:\SRVIFSC.IFS * /T
| |
| CALL=A:\SRVATTCH.EXE w: \\7CPESGDV\STATUS
| |
| RUN=Z:\CID\LOCINSTU\SRVREXX.EXE
| |
| libpath=.;\os2\install;\os2\dll;z:\cid\locinstu;
| |
| set os2_shell=cdboot.exe
| |
| set oemprogram=\ibminst\npconfig.exe
| |
| set exitwhendone=1
| |
| set ADAPTER_NIF=PMAC.NIF
| |
| set SRVNAME1=7CPESGDV
| |
| set SAVECONNECT=1
| |
| ================================================
| |
| | |
| Now, change to H: [warp 4 drive] and start server.
| |
| cd \cid
| |
| SERVICE.EXE /INI=SERVICE
| |
| | |
| Now, boot the client off the disk set.
| |
| | |
| Should work. If it does not, check the hardware configuration of the parallel ports and insure they are set to bi-directional if that option is offered.
| |
| | |
| I successfully installed Warp 4 on a Thinkpad using this method.
| |
| | |
| After the install, you should also be able to network between the two computers over the laplink cable using OS/2 Peer.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PMDD.SYS=
| |
| Installs pointer draw device driver support.
| |
| | |
| DEVICE=C:\Os2\Boot\Pmdd.sys
| |
| | |
| '''WARNING:''' OS/2 will not start without this line in your config.sys file.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PNPND.OS2=
| |
| Device driver for the RTL8019 Ethernet card.
| |
| DEVICE=PNPND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=POINTDD.SYS=
| |
| Provides mouse pointer draw support. Text modes 0, 1, 2, 3, and 7 and graphic modes D, E, F, and 10 are supported. For graphic modes other than D, E, F, and 10, the correct graphic device driver must also be installed.
| |
| | |
| DEVICE=C:\Os2\Boot\Pointdd.sys
| |
| | |
| | |
| '''WARNING:''' In order for MOUSE.SYS to work effectively, this driver must be loaded by OS/2 before MOUSE.SYS. Do not remove it from your config.sys file.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PPPEMYWI.OS2=
| |
| PPP over Ethernet Protocol driver included in ISDNPM 3.x.
| |
| | |
| DEVICE=PPPEMYWI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PRANDIS.OS2=
| |
| NDIS-Mac for the Parallel Port available for FREE at http://www.w-4.de/~tbaumann/ (there is also the PEER FAQ) supports:
| |
| | |
| * PPLINK-Fullduplexcable (needs PS/2 bidirectional port)
| |
| * LAPLINK/INTERLNK-Cable
| |
| * JFACOMM-Halfduplexcable
| |
| | |
| DEVICE=PRANDIS.OS2
| |
| | |
| For using it edit the following files:
| |
| | |
| 1. PROTOCOL.INI (in directory IBMCOM)
| |
| | |
| [NETBEUI_nif]
| |
| ADAPTRATE = 0
| |
| TI = 60000
| |
| T1 = 10000
| |
| T2 = 2000
| |
| MAXIN = 5
| |
| MAXOUT = 5
| |
| | |
| 2. IBMLAN.INI (in directory IBMLAN)
| |
| | |
| [requester]
| |
| sesstimeout = 300
| |
| | |
| [peer]
| |
| ; The next lines help you to locate bits in the srvheuristics entry.
| |
| ; 1 V Bit 15 changed to 2 to increase timeout
| |
| ; 0123456789012345678
| |
| srvheuristics = 1111014111131102133
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PROTMAN.OS2=
| |
| Network protocol-manager driver. IBM OS/2 LAN Protocol Manager, read PROTOCOL.INI in directory drive:\IBMCOM
| |
| | |
| DEVICE=C:\IBMCOM\PROTMAN.OS2 <parameter>
| |
| | |
| '''Parameters'''
| |
| | |
| * /I:C:\IBMCOM
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PSCOM.SYS=
| |
| This driver is required for serial communications on ACPI systems.
| |
| | |
| DEVICE=C:\OS2\Boot\PSCOM.SYS <parameters>
| |
| | |
| '''NOTE:''' This line MUST appear ''after'' any driver that uses a communications port, but ''before'' USB serial drivers (e.g., USBSER.SYS and/or USBCOM.SYS).
| |
| | |
| '''NOTE:''' See other notes related to COM.SYS.
| |
| | |
| '''TIP:''' To specify address and interrupt manually, use the syntax (port,address,IRQ), e.g.:
| |
| | |
| Set COM3 and COM4 at address 3E8 on IRQ 4 and 2E8 on IRQ 3:
| |
| DEVICE=drive:\OS2\COM.SYS (3,3E8,4) (4,2E8,3)
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose
| |
| * /W
| |
| Wait verbose mode. Displaying pauses with a "Press Enter to continue..." message.
| |
| * /F
| |
| Find COM ports on PCI combo (serial/parallel) cards automatically.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=PTDVR.SYS=
| |
| Driver of Backmaster tape backup system.
| |
| | |
| DEVICE=PTDVR.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=QAP2DRVR.SYS=
| |
| Driver for QAPlus/2, a PM program for testing system hardware: CDROM, ser/par ports, floppy drives, HD, keyboard, system board, memory, mouse... It can pinpoint failed SIMMs. Makes reports; everything. A bit dated now (1996), but still kinda useful. From DiagSoft, Inc., in Scott's Valley, CA, USA.
| |
| | |
| DEVICE=QAP2DRVR.SYS
| |
| | |
| Information by [[Wm D Loughman]] (wdlkhl@attglobal.net)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=QCAMM.SYS=
| |
| Driver for the Connectix Quickcam connected to parallel port.
| |
| QCammdd01.zip is FREE for personal use.
| |
| | |
| DEVICE=QCAMM.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| * /CB=nnn
| |
| Camera Balance 1-254 (varies)
| |
| | |
| * /CC=nnn
| |
| Camera Contrast,nnn=1-255,default 104
| |
| | |
| * /CE=nnn
| |
| Camera Exposure,nnn=1-254,default 210
| |
| | |
| * /CT=n
| |
| Camera Transfer,n=1,2,4, default 1
| |
| | |
| * /FD=n
| |
| Frame Depth,n=4,6,default 6
| |
| | |
| * /FH=nnn
| |
| Frame Height,nnn=1-240,default 240
| |
| | |
| * /FL=nnn
| |
| Frame Left,nnn=1-320,default 1
| |
| | |
| * /FT=nnn
| |
| Frame Top,nnn=1-240,default 1
| |
| | |
| * /FW=nnn
| |
| Frame Width,nnn=1-320,default 320
| |
| | |
| * /PA=nnn
| |
| Port Address,nnn=278,378,3bc
| |
| | |
| * /PN=n
| |
| Port Number,n=1,2,3
| |
| | |
| * /QM
| |
| Quiet Mode
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=QCOM.SYS=
| |
| Quatech (www.quatech.com) asynchronous serial device driver for the Quatech ISA and PCI boards High baud rates to 921,600 bits per second, depending on UART type. Support for 16750 UARTs and their 64-byte FIFOs. Up to 32 serial ports.
| |
| | |
| DEVICE=QCOM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=QUICKCAM.SYS=
| |
| Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro
| |
| | |
| '''NOTE:''' It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bi-directional modes, respectively. Bi-directional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used.
| |
| Available at: http://www.cix.co.uk/~elad/qv2.htm
| |
| | |
| DEVICE=QUICKCAM.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=QVCOM.SYS=
| |
| Quatech (www.quatech.com) asynchronous serial device driver for the Quatech ISA and PCI boards for DOS.
| |
| | |
| DEVICE=QVCOM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=R0STUB.SYS=
| |
| Is somewhere used by MMOS2. R0STUB is the ring-0 half of the sync-stream-manager (SSM) that allows MMPM/2 to synchronize audio and video. Allows audiosh.dll to talk to audio drivers vis IDC entrypoint. In the beginning, all the streaming took place at ring-0. Later (Warp 3?), the audio streaming was moved to ring-3. The API still had to be maintained to audio driver. R0STUB is small piece of code that takes FIFOs buffers to/from MMPM/2 ring-3 audio stream handler and delivers them from/to the hardware vender audio device driver.
| |
| | |
| DEVICE=C:\Mmos2\R0stub.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RAWEMYWI.OS2=
| |
| DSL cable-modem driver from ISDNPM.
| |
| | |
| DEVICE=RAWEMYWI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RCPTRNDS.OS2=
| |
| Racore Preferred Token Ring Adapter (PCMCIA Support).
| |
| | |
| DEVICE=RCPTRNDS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RDRHELP.200=
| |
| This driver is part of MPTS and is necessary somewhere for the NetBIOS protocol.
| |
| | |
| DEVICE=C:\Ibmcom\Netprog\Rdrhelp.200
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=REFPART.SYS=
| |
| Driver for accessing the Refernce Partition on IBM PS/2 Microchannel Machines.
| |
| Information by: [[Ralph-Marcus Boenicke]]
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RMAUDIO.SYS=
| |
| Reel Magic sound card driver.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RODENT.SYS=
| |
| Device driver for the shareware mouse driver Rodent.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ROUTE.SYS=
| |
| This driver allows a Netware client to see Netware servers on other physical LAN (or segment) across source-routing routers (used by many IBM routers). This is equivalent to Route.nlm for a Netware server.
| |
| | |
| DEVICE=C:\Netware\Route.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RSJSCSI.SYS=
| |
| The device driver RSJSCSI.SYS provides simplified access to SCSI devices. The CD Writer File System uses this device driver to access the CD Recorder (also needed for ATAPI).
| |
| | |
| DEVICE=RSJSCSI.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * -q
| |
| While booting, ask user for confirmation before installing the device driver.
| |
| | |
| * -x
| |
| This option allows using memory above the 16MB line. This works together with true 32-bit SCSI adapters, only (e.g. most EISA and PCI adapters).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RSMVDWO.SYS=
| |
| Driver for PolyPM a Remote Service Management Solution. http://www.iss2you.com
| |
| | |
| DEVICE=RSMVDWO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RTFND.OS2=
| |
| RTL8129 Fast Ethernet Adapter.
| |
| NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/realtek.zip.
| |
| | |
| DEVICE=RTFND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RTGNDA.OS2=
| |
| New description.
| |
| DEVICE=RTGNDA.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RTR16NDIS.OS2=
| |
| Racore 16/4 Token-Ring Adapter.
| |
| | |
| DEVICE=RTR16NDIS.OS2
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RTSND.OS2=
| |
| NDIS MAC for RTL8139 Fast Ethernet Adapter.
| |
| | |
| DEVICE=RTSND.OS2 <parameter>
| |
| | |
| '''Parameters'''
| |
| * /V
| |
| Verbose mode
| |
| * /Q
| |
| Quiet mode
| |
| * /2 .. /9
| |
| Selecects other Drivername = netry in \ibmcom\protocol.ini used automaticly if you install more than one card.
| |
| * /U
| |
| Number cards as found. useful if BUSNO, DEVICENO or ETHERID values are not present in protocol.ini
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RTSOS2.SYS=
| |
| ODI MAC for RTL8139 Fast Ethernet Adapter.
| |
| | |
| DEVICE=RTSOS2.SYS
| |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RVGNDIS.OS2=
| |
| Racore 10/100 AnyLAN Card.
| |
| | |
| DEVICE=RVGNDIS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=RZT2BOOT.SYS=
| |
| This driver is used by the IBM AO-Manager.
| |
| | |
| DEVICE=C:\SMG\Bin\Rzt2boot.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=S0TE.SYS=
| |
| Module for Teles ISDN-Cards.
| |
| | |
| DEVICE=S0TE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SB16D2.SYS=
| |
| Driver for Sound Blaster 16 sound card.
| |
| | |
| DEVICE=SB16D2.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /C:
| |
| Card Number, this will be set to 1 in most cases
| |
| | |
| * /D:
| |
| 8-bit DMA channel, Valid values - 0, 1 & 3 (Sound Blaster cards that use Vibra chipset do not have 0). Default value - 1.
| |
| | |
| * /H:
| |
| 16-bit DMA channel, Valid values - 5, 6 & 7 (Sound Blaster cards that use Vibra chipset do not have 6). Default value - 5.
| |
| | |
| * /I:
| |
| IRQ number, Valid values - 5, 7, 9, 10 & 11. Default IRQ - 5.
| |
| | |
| * /A:
| |
| Base addresss, Valid values - 220, 240, 260, 280 Default value - 220.
| |
| | |
| * /B:
| |
| Buffer size in KB, Valid values - 1-24. While any value in this range will work fine, to get the best results don't use this option and let the driver use the default buffer size. Default value - 8KB.
| |
| | |
| * /M:
| |
| MPU port address Valid values - 300 & 330 Default value - 330.
| |
| | |
| * /N:
| |
| Driver name, set this to SBAUD1$
| |
| | |
| * /Q
| |
| Quiet mode flag, OPTIONAL. Setting this option disables initialization messages. If not specified the initialization messages are displayed during boot-up.
| |
| | |
| * /EXT
| |
| Use MPU port instead of internal synth for MIDI, OPTIONAL By default the drivers are configured to use the internal synthesizer. But if you have a daughterboard attached to your Sound Blaster card and you want MIDI playback to use the synthesizer in the daughterboard, specify this flag.
| |
| | |
| * /P
| |
| Ignore PnP BIOS if it is present. If PnP BIOS is present, the driver usually queries the BIOS for certain PnP port addresses. Specifying this option causes the driver not to access the BIOS and determine these port addresses itself.
| |
| | |
| * /G
| |
| Override PnP BIOS, undocumented switch. When used all parameters must be specified.
| |
| | |
| '''TIP:''' Look for the SB163264.ZIP package which contains all drivers for the soundblaster cards including those for the AWE 64.
| |
| | |
| A FREE Mixer for SB 16/32/64 is Mixomat 1.01b by [[Christoph Bratschi]], and the newer Mixomat 2.0 available at http://www.bratschi.net
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SBAWED2.SYS=
| |
| It is used by Creative Labs AWE32 soundcards.
| |
| | |
| DEVICE=C:\Sbos2\Sbawed2.sys
| |
| | |
| '''Parameter:'''
| |
| See DEVICE SB16D2.SYS
| |
| | |
| '''TIP:''' According to OS/2-Inside the statement can be shortened to:
| |
| SBAWED2.SYS /N:SBAUD1$
| |
| | |
| '''TIP:''' Look for the SB163264.ZIP package which contains all drivers for the soundblaster cards including those for the AWE 64.
| |
| According to OS2V.O.I.C.E for the AWE 64 the entry should look like this:
| |
| DEVICE=drive:\SBOS2\SBAWED2.SYS /C:1 /D:1 /H:5 /I:5 /A:220 /B:1 /M:330 /N:SBAUD1$ /G
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SBLIVE16.SYS=
| |
| Soundblaster Live 16Bit MMPM/2 Sounddriver ported from the Linux sources by Sander van Leuween (sandervl@xs4all.nl)
| |
| | |
| DEVICE=SBLIVE16.SYS <parameter>
| |
| | |
| '''Parameters:'''
| |
| | |
| * /V verbose (prints copyrights during driver init)
| |
| * /C enable CD audio input
| |
| * /M enable microphone audio input
| |
| * /L enable linein audio input
| |
| * /A enable aux audio input (since driver 0.80)
| |
| | |
| '''ATTENTION:''' Read the supplied readme.txt to avoid troubles if you have installed the scitech display drivers (SDDHELP.SYS).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SBLIVE32.SYS=
| |
| Soundblaster Live 32Bit core audio driver ported from the Linux sources by Sander van Leuween (sandervl@xs4all.nl)
| |
| | |
| DEVICE=SBLIVE32.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /D
| |
| Print start and end address of code (useful to locate code that causes a trap)
| |
| | |
| '''NOTE:''' The install.cmd copies - if it finds a Warp 4.5 (fixpak 13 or WarpServer for E-Business) an driver according to the new KEE API (32 Bit driver architecture) to this file.
| |
| | |
| A appropiate Mixer is the FREE LBMix by Lesha Bogdanow (boga@inbox.ru)
| |
| The lastest version of the mixer can be downloaded from http://www.podolsk.ru/~boga/OS2Programs.html where you can also find a couple of other useful OS/2 programs.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SBMIX.SYS=
| |
| Soundblaster-mixer driver.
| |
| | |
| DEVICE=SBMIX.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SCANHP1.SYS=
| |
| SCSISCAN OS/2 Copyright (c) 1992,1993 Danmar Systems Inc. Scanner Driver for use with the propietary SCSI controller included with the HPIIp series.
| |
| | |
| DEVICE=SCANHP1.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SCANOS2.SYS=
| |
| SCSISCAN OS/2 Version 1.20, Copyright (c) 1992,1993 Danmar Systems Inc. ASPI Compatible Scanner Driver.
| |
| | |
| DEVICE=SCANOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SCAX.SYS=
| |
| Device driver for HST Janus ISDN ISA-Cards and CAPI v.1.1/2.0 for 1TR6 (German) protocol.
| |
| | |
| DEVICE=SCAX.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SCAXE.SYS=
| |
| Device driver for HST Janus ISDN ISA-Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol.
| |
| | |
| DEVICE=SCAXE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SDDHELP.SYS=
| |
| | |
| The helper driver for the Scitech Software Display Doctor for OS/2. The Display Doctor is a universal driver for almost every graphiccard. Driver for the Scitech Display Doctor, also for some games (e.g. SNES9XOS2) there is also a IBM Special Edition.
| |
| | |
| DEVICE=C:\OS2\SDDHELP.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| * /Q
| |
| Disables the banner during boot.
| |
| | |
| '''TIP:''' To change to the default fontsize add to the OS2.INI in 'Applications' the key 'DefaultFont'. As key value any installed font and fontsize is possible e.g. '10.System Proportional.' (regard the use of the zero terminator '.').
| |
| | |
| '''Supported Graphic Chips:'''
| |
| * 3dfx Voodoo Banshee, Voodoo3, Voodoo4, Voodoo5
| |
| * 3DLabs Permedia, Permedia 2, Permedia 2V, Permedia 3
| |
| * Alliance ProMotion 6422, ProMotion AT24, ProMotion AT3D
| |
| * ARK 1000PV, 2000PV, 2000MT, 2000MI (Quadro64), 2000MI+ (Quadro64)
| |
| * ATI Mach64 GX, Mach64 CX, Mach64 CT, Mach64 VT, 3D Rage, Mach64 VTB
| |
| * ATI 3D Rage II, 3D Rage II+, Mach64 VT4, 3D Rage IIC, 3D Rage Pro
| |
| * ATI 3D Rage LT Pro, Rage Mobility, Rage XL, Rage 128, Rage 128 Pro
| |
| * ATI Rage 128 Ultra, Rage Mobility 128, Rage Mobility 128-D4x, Radeon
| |
| * ATI Radeon VE, Mobility Radeon, Radeon 7500, Mobility Radeon 7500
| |
| * ATI Radeon 8500
| |
| * Chips & Technologies 65548, 65550, 65554, 65555, 69000
| |
| * Cirrus Logic CL-GD5434, CL-GD5440, CL-GD5436, CL-GD5446
| |
| * Cirrus Logic CL-GD7555 LCD, CL-GD7543 LCD, Laguna 5462, Laguna 5464
| |
| * Cirrus Logic Laguna 5465
| |
| * Cyrix MediaGX
| |
| * IBM VGA Compatible
| |
| * InteGraphics CyberPro 2000, CyberPro 2010
| |
| * Intel i740, i740 PCI, i810, i810/DC100, i810e, i815
| |
| * Macronix 86250, 86251
| |
| * Matrox MGA Millennium, MGA Millennium II, MGA Mystique
| |
| * Matrox MGA Mystique 220, MGA-G100, MGA-G200, MGA-G400, MGA-G450
| |
| * Matrox MGA-G550
| |
| * NeoMagic MagicGraph 128, MagicGraph 128ZV, MagicGraph 128XD
| |
| * NeoMagic MagicGraph 256AV, MagicMedia 256AV+, MagicMedia 256ZX
| |
| * NeoMagic MagicMedia 256XL+
| |
| * Number Nine Imagine 128, Imagine 128 II, Imagine 128 II VRAM
| |
| * Number Nine Imagine 128 II DRAM, Ticket 2 Ride WRAM
| |
| * Number Nine Ticket 2 Ride SGRAM, Ticket 2 Ride IV
| |
| * NVIDIA RIVA-128, RIVA-128ZX, RIVA-TNT, RIVA-TNT2, RIVA-TNT2 M64
| |
| * NVIDIA RIVA-TNT2 Vanta, RIVA-TNT2 Ultra, GeForce 256, GeForce DDR
| |
| * NVIDIA Quadro, GeForce2 GTS, GeForce2 MX, Quadro2 Pro, Quadro2 MXR
| |
| * NVIDIA GeForce2 Ultra, GeForce3
| |
| * OAK Spitfire 64107, Spitfire 64111, Eon 64017, Eon 64217, Warp 5
| |
| * Philips 9710
| |
| * Rendition Verite V1000, Verite V2200
| |
| * S3 Vision 864, Vision 964, Vision 868, Vision 968, Trio32, Trio64
| |
| * S3 Trio64V+, Trio64UV+, Trio64V2/DX, Virge, Virge/DX/GX, Virge/VX
| |
| * S3 Virge/GX2, Virge/MX, Trio3D, Trio3D/2X, Savage3D, Savage4
| |
| * S3 Savage/MX/IX, SuperSavage/IXC, Savage2000
| |
| * Sigma Designs RealMagic 64 GX
| |
| * SiS 6202, 6205, 6215, 5597/5598, 6326, 300, 305, 630, 5595/530
| |
| * SiS 5595/620, 730
| |
| * Trident TGUI9440, TGUI9440-R2, TGUI9680, ProVidia 9682
| |
| * Trident Cyber9385 LCD, ProVidia 9685, 3DImage 975, Cyber9397 LCD
| |
| * Trident 3DImage 985, Blade 3D, Blade 3D (VIA VT8501)
| |
| * Trident Blade 3D (VIA VT8601)
| |
| * Tseng Labs ET4000/W32p, ET6000, ET6100
| |
| * Weitek P9000, P9100
| |
| * VESA VBE 1.2, VBE 2.0, VBE 3.0
| |
| | |
| | |
| '''Supported Laptop Graphics Chips'''
| |
| The following is a complete list of the various laptop graphics chipsets that
| |
| is supported in this version of SciTech Display Doctor. Please note that this
| |
| list refers to the actual chips being used, not the laptop brand or model
| |
| itself. Thus you will not see any products from Gateway or Dell on the list,
| |
| but their products are supported because they use NeoMagic, ATI, Cirrus etc.
| |
| chips.
| |
| | |
| * ATI 3D Rage LT Pro, Rage Mobility, Rage Mobility 128, Rage Mobility 128-D4x
| |
| * ATI Mobility Radeon, Mobility Radeon 7500
| |
| * Chips & Technologies 65550, 65554, 65555, 69000
| |
| * Cirrus Logic CL-GD7555 LCD, CL-GD7543 LCD
| |
| * NeoMagic MagicGraph 128, MagicGraph 128ZV, MagicGraph 128XD
| |
| * NeoMagic MagicGraph 256AV, MagicMedia 256AV+, MagicMedia 256ZX
| |
| * NeoMagic MagicMedia 256XL+
| |
| * S3 Virge/MX, S3 Savage/MX/IX, SuperSavage/IXC
| |
| * Trident Cyber9385 LCD, Cyber9397 LCD
| |
| * VESA VBE 1.2, VBE 2.0, VBE 3.0
| |
| | |
| | |
| '''Supported Flat Panel Graphics Chips'''
| |
| The following is a list of graphics chipsets that are working with digital
| |
| flat panels. Please note that if you can't see anything on the display when
| |
| you boot your machine, SciTech Display Doctor can't fix this, as it is a
| |
| hardware problem.
| |
| | |
| * ATI 3D Rage LT Pro (DFP), Rage XL (DFP), Rage 128 Pro (DVI)
| |
| * ATI Rage 128 Ultra (DVI), Radeon (DVI), Radeon VE (DVI), Radeon 7500 (DVI)
| |
| * ATI Radeon 8500 (DVI)
| |
| * Matrox MGA-G200 (DFP), MGA-G400 (DVI)
| |
| | |
| Note that the Rage XL is currently not displaying correctly in 640x480.
| |
| | |
| '''Supported TV Out Graphics Chips'''
| |
| The following is a list of graphics chipsets that are working with TV Out.
| |
| Please note that if you can't see anything on the display when you boot your
| |
| machine, SciTech Display Doctor can't fix this, as it is a hardware problem.
| |
| Note that the OS/2 boot messages will not display correctly on the TV; the
| |
| text mode used at that time does not work on TV screens, and SDD has no
| |
| control over this (it's not even active yet).
| |
| | |
| * ATI 3D Rage II+, 3D Rage IIC, 3D Rage Pro, 3D Rage LT Pro
| |
| * ATI Rage 128 (Rage Theater models only), Radeon (AIW only)
| |
| * Matrox MGA-G200, MGA-G400
| |
| | |
| Note that the G200 should be working, but hasn't been tested at this time.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SDI_ASPI.SYS=
| |
| PC-BaX ASPI Device Driver. This driver provides PC-BaX with support for SCSI devices, it uses the OS2ASPI.DMD device manager. This is the prefered method of SCSI support for
| |
| PC-BaX and should be used in almost all cases.
| |
| | |
| DEVICE=SDI_ASPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SDI_CISA.SYS=
| |
| PC-BaX ISA Device Driver. This driver provides PC-BaX with support for a special CRISTIE 8-bit SCSI controller.
| |
| | |
| DEVICE=SDI_CISA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SDI_IDE.SYS=
| |
| PC-BaX IDE Device Driver. This driver provides PC-BaX with support for IDE connected devices like Travan backup stations.
| |
| | |
| DEVICE=SDI_IDE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SDI_LPT.SYS=
| |
| PC-BaX LPT Device Driver. This driver provides PC-BaX with support for Cristie parallel port connect tape drives, it does not need any other OS/2 Devices managers or Drivers.
| |
| | |
| DEVICE=SDI_LPT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SDI_SCSI.SYS=
| |
| PC-BaX SCSI Device Driver. This driver provides PC-BaX with support for SCSI devices, it uses the OS2SCSI.DMD device manager. This method of SCSI support is only neccesary when using an IBM MCA type SCSI controller. See common problems by clicking on the support icon within PC-BaX for a full description.
| |
| | |
| DEVICE=SDI_SCSI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SEAGB24.SYS=
| |
| Sytos Plus driver for the Seagate 4mm Tape.
| |
| | |
| DEVICE=SEAGB24.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SESDD32.SYS=
| |
| Security device driver. Part of IBM's security system - enabler driver. Will stop install if by itself. Network Associates has a product called 'VirusScan for OS/2'. In its User Guide's appendix 'C' is a very good description of how to modifiy the config.sys file manually to add SES to the user's machine.
| |
| | |
| DEVICE=C:\Os2\Boot\Sesdd32.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SIO.SYS=
| |
| The Sio.sys driver is a replacement for the com.sys driver. The Sio.sys driver can support up to 16 COM ports.
| |
| | |
| DEVICE=C:\Os2\Boot\Sio.sys <parameters>
| |
| | |
| * DEVICE=C:bslbootbslSio.Sys (Cn, An, In, Ig, Fc) :hp4. [(Cn, An, In, Ig, Fc)] :ehp4.
| |
| | |
| * CN
| |
| The number of the Com port or the string COM1 to COMn.
| |
| If you use a * in front of the Com port, then the port will be used as a PCMCIA Com port.
| |
| | |
| * AN
| |
| A hexnumber to define the I/O address of the Com port.
| |
| | |
| * IN
| |
| The IRQ number (0 to 15) or the string IRQ0 to IRQ15. If you don't use this parameter, SIO will search for a IRQ.
| |
| | |
| * IG
| |
| This exists only for compatibility with COM.SYS and is ignored by Sio.sys.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SIO2K.SYS=
| |
| Excellent replacement driver for COM.SYS. If you utilise communications software on a regular basis at high speeds (e.g. 57,600), then the SIO drivers are the way to go.
| |
| | |
| DEVICE=SIO2K.SYS
| |
| | |
| '''NOTE:''' REM all other serial drivers like COM.SYS or SIO.SYS
| |
| | |
| The SIO2K set of drivers have some interesting new techniques and implementations.
| |
| | |
| '''Block input and output.''' If the UART is a FIFOed device, the interrupt service routines (there are several) always use block input and output instructions to read and write characters. During high communications activity, this means the 16550 interrupt routine is 5 to 10 times faster (possibly more) than previous implementations. UARTs with larger FIFOs will execute even faster. Now boys and girls, it is the interrupt service routines that are faster. Nothing on Earth can make your modem go faster than it is capable of. However, faster interrupt service routines means less processor overhead.
| |
| | |
| '''Automatic FIFO sizing.''' The SIO2K drivers now support 16650, 16550A, 16750, 16850 and 16950 uarts. However, knowing the chip type does not necessarily mean the FIFO size is know. For example, the 16654 is the equivalent of four (or more) 16650A UARTS on a single chip. The normal 16650 UARTs have a 32 byte FIFO, but the UARTS on the 16654 have 64 byte FIFOs. Only probing will determine this.
| |
| | |
| The first time a UART is touched by an application the SIO2K drivers automatically probe the size of the FIFO and the found size is used. Note that a UART with no FIFOs can be thought of as having a FIFO size of 1 byte. My thanks to Sam Detweiler, of IBM, for the idea of probing for FIFO size.
| |
| | |
| '''Automatic Crystal Frequency.''' Most UARTs are capable of bit rates to 921600bps or more. However, on most serial devices, the bit rate is limited to 115200bps by the crystal oscillator attached to the UART. Many boards, like those from Lava, offer bit rates greater than by using faster crystal oscillator. The down side is one must tell the driver to use a bit rate of 28800 to really get a bit rate of.
| |
| | |
| The first time a UART is touched by an app, the SIO2K drivers probe the UART to determine if it is using a standard crystal oscillator or not. If the frequency is not standard, then the SIO2K drivers automatically adjust so that a request of 115200bps yields an actual bit rate of 115200bps. In addition, the maximum bit rate is adjusted and reported to applications that request the maximum bit rate. Boards like the Blue Heat from CTI use a 12x crystal and its top bit rate is 1382.4kbps.
| |
| | |
| '''Minimum touch during boot.''' The SIO2K drivers do not touch the UART hardware during boot. This was very difficult to do, while maintaining a compatible OS/2 serial driver. The "no touch" practically eliminates the possibility of traps occurring during the boot process when they are difficult to deal with. This does mean that a lot of processing will occur the first time a port is opened.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SIS900.OS2=
| |
| SIS 900/7016 PCI Fast Ethernet Adapter.
| |
| | |
| DEVICE=SIS900.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SMC1208.OS2=
| |
| SMC EZ PCI COMBO Ethernet NIC.
| |
| | |
| DEVICE=SMC1208.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SMC8000.OS2=
| |
| SMC Ethernet Adapter Family (SMC 8003, SMC 8013, SMC 8216, SMC 8416) NDIS driver.
| |
| | |
| DEVICE=SMC8000.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SMC8000.SYS=
| |
| SMC Ethernet Adapter Family (SMC 8003, SMC 8013, SMC 8216, SMC 8416) ODI driver.
| |
| | |
| DEVICE=SMC8000.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SMC9432.OS2=
| |
| Network driver for SMC9432/TX (EtherPower II) 10/100 PCI NIC.
| |
| | |
| DEVICE=SMC9432.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SMCND.OS2=
| |
| Acctron SMC 1211TX base 10/100 PCI ethernet card.
| |
| | |
| DEVICE=SMCND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SMCPWR.OS2=
| |
| SMC EtherPower for OS/2. NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/dec.zip.
| |
| | |
| DEVICE=SMCPWR.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SND16.SYS=
| |
| The Snd16.sys driver is used by the MAD16 soundcard.
| |
| | |
| DEVICE=C:\Os2\Boot\Snd16.sys <parameters>
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SND931.SYS=
| |
| OPTiSound 82C931 Sound Card Driver.
| |
| | |
| DEVICE=SND931.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SNDSCAPE.SYS=
| |
| Ensoniq Soundscape VIVO (SND-ENSVIVO) AD1848 Audio OS/2 Device Driver.
| |
| | |
| DEVICE=SNDSCAPE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SOAB.SYS=
| |
| Module for Teles ISDN Cards.
| |
| | |
| DEVICE=SOAB.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SOCKETS.SYS=
| |
| Network driver.
| |
| | |
| DEVICE=C:\Mptn\Potocol\Sockets.sys <parameter>
| |
| | |
| '''Parameters:'''
| |
| | |
| * /c:value
| |
| Number of the COM port to which debug information should be send to. Value can be any valid COM port number .
| |
| Default = 2
| |
| | |
| * /v
| |
| Display the banner at boot time.
| |
| | |
| * /uis:0
| |
| Turn of unique ID for select().
| |
| If this parameter is not set it defaults to ON .
| |
| | |
| * /mem:value
| |
| Number of 4kbyte clusters allocated at initialization time.
| |
| Value can be in the range from 30 to 32766 . Default = 75
| |
| | |
| * /gdt:value
| |
| The maximum number of 64kbyte blocks the stack can allocate.
| |
| Default = 80
| |
| | |
| | |
| '''TIP:''' According to IBM there is the undocumented parameter /UIS:0 for use on 3172 Offload System to improve the performance. This parameter is only intended for use on a 3172 Offload System and turns off the process id : thread id processing on select () calls in the stack
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SOCKETSK.SYS=
| |
| 32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fxpak 13 for Warp 4.
| |
| Part of the TCP/IP Ver. 4.x firewall.
| |
| | |
| DEVICE=SOCKETSK.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose, shows version-number
| |
| | |
| * /MEM:#
| |
| amount of 4KB Clusters. Standard = 75; valid Range = 30 - 32766
| |
| | |
| * /GDT:#
| |
| max. amount of 64KB Blocks the Stack can arrange; Standard = 80
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SOLO.SYS=
| |
| Driver for ESS SOLO 1 based soundcards or motherboards.
| |
| | |
| DEVICE=SOLO.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /O:ENABLEWAVETABLE
| |
| If your installation includes an ES689 or ES692 WaveTable adding thid parameter to the config.sys line will cause the driver to use the wavetable as the primary midi.
| |
| | |
| * /R:n
| |
| (where n is in milliseconds and between 1 and 32) this parameter allows the user to over ride the default timer resolution (5ms). Increasing this value will cause te driver to get dispatched less often and so use less cpu time, however this can cause the tempo to drag. Decreasing this value below 5 will cause the driver to use more cpu time and can interfere with other timers.
| |
| | |
| The IBM Mixer IOCTLS fully implemented in the Solo driver and this driver can be controlled using IBM's Warp Mixer. Available as Warpmix.zip
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SPCIIRQ.SYS=
| |
| Change IRQ for PCI cards.
| |
| | |
| DEVICE=SPCIIRQ.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| * 0..255
| |
| * 0..31
| |
| * 0..7
| |
| * 1..4 fr #A..#B
| |
| * 0..15
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SPKRDD.SYS=
| |
| The Speaker audio device driver provide support for playing digital audio waveform files on the standard PC speaker by using the MMPM/2 audio system. The speaker driver provides support for PCM waveform files that are (8-bit/16-bit, stereo/mono, 11Khz-44khz).
| |
| | |
| DEVICE=SPKRDD.SYS
| |
| | |
| BETTER DON'T USE IT, if you need (or want) sound on a regular base better buy one of those cheap soundcards.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SPX.SYS=
| |
| Provides support for the Novell Netware SPX protocol.
| |
| | |
| DEVICE=C:\Netware\Spx.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SRVIFS.SYS=
| |
| Part of the ThinIFS by IBM.
| |
| | |
| DEVICE=SRVIFS.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SSCOMA1.SYS=
| |
| OS/2 Serial port driver with auto-detection of Serial Solutions PCI serial cards
| |
| available at: http://www.brainboxes.com/
| |
| | |
| PCI card support, 115200 baud rate, ISA interrupt sharing cards with a shared interrupt status register, PCMCIA single function serial communications card support, the device driver is a replacement for the COM.SYS standard serial port driver. Up to 8 COM ports can be opened.
| |
| | |
| DEVICE=SSCOMA1.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /TTEMPLATE.PCI
| |
| This template describes a range of PCI coms cards and gives additional information to the driver about a specific card's non-standard features.
| |
| | |
| * /L
| |
| List the detected PCI cards
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SSMDD.SYS=
| |
| Is somewhere used by MMOS2.
| |
| | |
| DEVICE=C:\Mmos2\Ssmdd.sys <parameter>
| |
| | |
| '''Parameter:'''
| |
| * /H:nn
| |
| The default is 32. For best results, set nn = 32 x (the number of movie clips being played). For example, if you plan on regularly viewing 2 clips at a time, set nn to 64 (32 x 2).
| |
| | |
| '''Example:'''
| |
| DEVICE=C:\MMOS2\ssmdd.sys /S:64 /P:64 /H:256 /Q:1024 /E:1024
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SUMMA.SYS=
| |
| Driver for Summa MM1201 format graphics tablet.
| |
| | |
| DEVICE=SUMMA.SYS <paremeter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * SERIAL=COMn
| |
| n=the serial port where the tablet is attached
| |
| | |
| * /a
| |
| Sets the tablet to ABSOLUTE mode.
| |
| | |
| * /r
| |
| Sets the tablet to RELATIVE mode (mouse emulation mode).
| |
| | |
| * /xl:n
| |
| Sets the lower X limit of the tablet aperture, n = number.
| |
| | |
| * /yl:n
| |
| Lower Y limit aperture.
| |
| | |
| * /xh:n
| |
| Upper X limit aperture.
| |
| | |
| * /yh:n
| |
| Upper Y limit aperture.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SVDISK.SYS=
| |
| This is the driver for the Super Virtual Disk tool, which emulates a floppy drive in memory. Super Virtual Disk (SVDisk) is a 32-bit OS/2 device driver that emulates either a removable Virtual Disk (VDisk) or a removable Virtual Floppy (VFloppy) drive. By using OS/2's virtual memory management facility, SVDisk allows the entire contents of the disk to be swapped out via the paging mechanism. If the SVDisk is frequently accessed, OS/2 will keep the most recently used memory pages in RAM, SVDisk will essentially behave like a RAM Disk.
| |
| | |
| DEVICE=C:\SVDisk\SVDisk.sys <parameter>
| |
| | |
| '''Parameter:'''
| |
| * n
| |
| the possible values for VFloppy device are: 360, 720, 1200, 1440, and 2880. Use 1520, 1840 and 3680 for XDF VFloppy. Since SVDisk defaults to a 1.44MB VFloppy device, the 1440 parameter can be omitted.
| |
| * ssss
| |
| the size of the VDisk device. The possible values for ssss are from 16 to 131056 (16KB to 128MB.) The VDisk device will always round up the size into 16Kb boundary.
| |
| * eeee
| |
| (optional) the root directory entries for the device. Default 64
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=SWITCH.OS2=
| |
| Virtual PC for OS/2 Virtual Switch Driver. Virtual Switch Networking is the most powerful way of connecting your guest systems to an Ethernet network. It assigns a unique MAC address to your virtual machine, allowing it to use arbitrary network protocols and even act as a server. For other machine in the network, the virtual machine appears as an additional network station and it is indistinguishable from a "real" PC.
| |
| | |
| Note that while Virtual Switch Networking gives you more power and flexibility, it also means additional administration. The virtual machine uses a MAC address of its own and therefore needs a unique IP address etc. For typical TCP/IP requirements, the Shared Networking (NAT) is recommended.
| |
| | |
| DEVICE=SWITCH.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SYSINFO.SYS=
| |
| This driver is needed foby the System Information Tool.
| |
| | |
| DEVICE=C:\NETFIN\SYSINFO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=SYSIOS2.SYS=
| |
| This device driver is required by the System Information Tools provided in the "BonusPak" that comes with OS/2 Warp. If you plan on using these tools, do not delete this driver.
| |
| | |
| DEVICE=SYSIOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TC15DVR.SYS=
| |
| Driver of Backmaster tape backup system.
| |
| | |
| DEVICE=TC15DVR.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TC902X.OS2=
| |
| Tamarack tmi TC9021 Ethernet MAC Adapter.
| |
| | |
| DEVICE=TC902X.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TCPBEUI.OS2=
| |
| This is the TCPBEUI (NetBIOS over TCP/IP) protocol driver.
| |
| | |
| DEVICE=C:\Ibmcom\Protocol\TcpBEUI.os2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TED1TR6.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TED1TR6.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TED5ESS.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TED5ESS.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TEDATEL.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDATEL.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TEDBELG.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDBELG.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TEDETSI.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDETSI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TEDFRANC.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDFRANC.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TEDJAPAN.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDJAPAN.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TEDNI.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDNI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=TEDSWED.OS2=
| |
| The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
| |
| | |
| DEVICE=TEDSWED.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TESTCFG.SYS=
| |
| Test configuration device driver. TESTCFG.SYS is used during the install process to test your systems configuration. It is also used by the Selective Install process and during device driver installations.
| |
| | |
| DEVICE=C:\Boot\Testcfg.sys
| |
| | |
| '''NOTE:''' Because this driver is used by the Selective Install process, it should not be deleted.
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=THESEUS2.SYS=
| |
| Driver for the outdated memory analysis tool THESEUS2 by IBM. See DEVICE THESEUS5.SYS for an update.
| |
| | |
| DEVICE=THESEUS2.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=THESEUS5.SYS=
| |
| Driver for the new memory analysis tool THESEUS3 by IBM downloadable at: ftp://ftp.boulder.ibm.com/ps/products/os2/fixes/v4warp/theseus3/
| |
| | |
| DEVICE=THESEUS5.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TOKEN.SYS=
| |
| This line differs depending on the network board you have.
| |
| | |
| DEVICE=TOKEN.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TOUCH.SYS=
| |
| Implements support for touch devices.
| |
| | |
| DEVICE=TOUCH.SYS
| |
| | |
| For a touch device to be effectively used, the POINTDD.SYS device driver and appropriate mouse device-driver support must be loaded. In addition, these statements must be included in the CONFIG.SYS file in the following order:
| |
| | |
| * A device-dependent statement that gives the name of the file containing the information for the touch device you use.
| |
| | |
| * A device-independent statement that identifies the touch device to TOUCH.SYS
| |
| | |
| * If during installation, OS/2 detects a touch device installed on your system, the Install program automatically loads the required device-driver support necessary to enable the touch device. The touch device shares the auxiliary device (mouse) port on the system with the mouse by allowing the mouse to connect to the touch device, which is then connected to the system.
| |
| | |
| * The Install program automatically adds the following statements to the CONFIG.SYS file:
| |
| | |
| DEVICE=drive:\OS2\PDITOU0x.SYS CODE=drive:\OS2TOUCO21.BIN INIT=drive:TOUCH.INI
| |
| DEVICE=drive:\OS2\TOUCH.SYS TYPE=PDITOU$
| |
| RUN=drive:\OS2\CALIBRATE.EXE-C drive:\OS2CALIBRAT.DAT
| |
| DEVICE=drive:\OS2\MOUSE.SYS TYPE=PDIMOU$
| |
| | |
| * "x" is 1 or 2 depending on the bus architecture of your system. TOUCO21D.BIN is the touch-device microcode binary file and TOUCH.INI is a text file containing default parameter settings.
| |
| | |
| * The RUN=CALIBRAT.EXE statement is to activate the Calibration program. This program performs the dual actions of downloading calibration-constant data to the touch device each time the system is started, and enabling recalibration of the touch device at initial setup, and when the device is moved to a new location.
| |
| | |
| * To recalibrate the touch device, enter the following at an OS/2 command prompt:
| |
| | |
| x: (where "x" is your OS/2 boot drive.)
| |
| CD \OS2
| |
| CALIBRAT -U
| |
| | |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TR2KNDIS.OS2=
| |
| Texas Instruments TokenLite Compatible Token-Ring Adapter driver.
| |
| | |
| DEVICE=TR2KNDIS.OS2
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=TSRKRN.SYS=
| |
| Module for Teles ISDN-Cards.
| |
| | |
| DEVICE=TSRKRN.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=UART.SYS=
| |
| Basic UART device driver for DEVICE SIO2K.SYS.
| |
| | |
| DEVICE=UART.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ULTRADD.SYS=
| |
| Device driver for Gravis Ultra Soundcards (discontinued)
| |
| | |
| DEVICE=ULTRADD.SYS <parameter>
| |
| | |
| Now FREE available at http://www.xs4all.nl/~sandervl
| |
| free REGISTRATION KEY: 191181338
| |
| | |
| '''Parameter:'''
| |
| | |
| * /P:,
| |
| * /I:,
| |
| * /D:,
| |
| * /C:
| |
| (default = 28) (Ignored on a GUS PnP)
| |
| * /J
| |
| (enable joystick)
| |
| * /L
| |
| (always enable line-in)
| |
| * /V
| |
| (verbose messages at startup)
| |
| * /X
| |
| Displays initial Code & Data offsets (for debugging crashes)
| |
| | |
| The next switches are only for the GUS PnP (Pro) and other InterWave based soundcards:
| |
| * /G
| |
| (enable GUS PnP (and Interwave) detection)
| |
| * /R
| |
| (force PnP reset if your system doesn't have a PnP BIOS and you are NOT running OS/2 Warp 4.0)
| |
| NOTE: /R seems to be necessary for the Reveal WaveXtreme
| |
| * /E:XXXXXXX
| |
| (3 letters + 4 digits) (PnP ISA Vendor ID for Interwave based soundcards not sold by Gravis
| |
| example (uses the GUS PnP Vendor ID): /E:GRV0001 The Vendor ID can be found in the iw.ini file)
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=ULTRAVDD.SYS=
| |
| Virtual Device driver for Gravis Ultra Soundcard for DOS (discontinued).
| |
| | |
| DEVICE=ULTRAVDD.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=UNIAUD16.SYS=
| |
| Part of Universal Audio Driver
| |
| | |
| DEVICE=UNIAUD16.SYS
| |
| | |
| Supports the following audio cards:
| |
| | |
| * Sound Blaster Live!
| |
| * Cirrus Logic CS4281 chipset based audio cards
| |
| * Avance Logic ALS4000 chipset based audio cards
| |
| * C-Media CMI8738 chipset based audio cards
| |
| * Intel ICHx + SigmaTel STAC9721/23 chipset based audio cards
| |
| | |
| '''NOTE:''' Uniaud will crash if EARLYMEMINIT=TRUE is set in config.sys
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose
| |
| * /C
| |
| Enable CD output
| |
| * /M
| |
| Enable Microphone output
| |
| * /L
| |
| Enable Line-In output
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=UNIAUD32.SYS=
| |
| Part of Universal Audio Driver.
| |
| | |
| DEVICE=UNIAUD32.SYS <parameter>
| |
| | |
| Supports the following audio cards:
| |
| | |
| * Sound Blaster Live!
| |
| * Cirrus Logic CS4281 chipset based audio cards
| |
| * Avance Logic ALS4000 chipset based audio cards
| |
| * C-Media CMI8738 chipset based audio cards
| |
| * Intel ICHx + SigmaTel STAC9721/23 chipset based audio cards
| |
| | |
| '''NOTE:''' Uniaud will crash if EARLYMEMINIT=TRUE is in the config.sys
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose
| |
| | |
| * /C:CARDNAME
| |
| Where CARDNAME is :
| |
| SBLIVE : Sound Blaster Live!
| |
| CS4281 : Cirrus Logic CS4281
| |
| ALS4000 : Avance Logic ALS4000
| |
| CMEDIA : C-Media CMI8738
| |
| ICH : Intel ICH + SigmaTel STAC9721/23
| |
| Force detection of specified audio hardware
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=UNICODE.SYS=
| |
| Warp Server for E-Business Unicode Driver, enables unicode and locale support. Necessary for JFS.IFS.
| |
| | |
| DEVICE=UNICODE.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| * -L
| |
| Specifies that base locale setting is permanent. If selected \LANGUAGE\LOCALE\DEFAULT.LOC overrides the config.sys settings.
| |
| * -x
| |
| Disables codepage conversion, must not be used with JFS.IFS
| |
| * -V
| |
| Verbose
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=UPSMON.SYS=
| |
| A free UPS monitor found on Hobbes to monitor a serial port for UPS events from APC's 'Back UPS' line of devices. Requires a serial port and special Non-standard Null-modem cable, usually provided by APC. The author provides infomation to construct this cable, if user needs one. Comes with a daemon that is started from the startup folder.
| |
| | |
| DEVICE=UPSMON.SYS
| |
| | |
| '''Platform Support'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBAUDIO.SYS=
| |
| Driver for USB audio devices. The only devices you can use with it at the moment are loudspeakers from Labtec.
| |
| | |
| DEVICE=C:\OS2\BOOT\USBAUDIO.SYS
| |
| | |
| '''Parameters'''
| |
| | |
| * /V
| |
| Verbose Mode, displays driver information during OS/2 initialization.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBCOM.SYS=
| |
| Driver for USB modems. At the moment support is only available for some devices from IBM and US-Robotics. The Usbcom.sys driver emulates an aditional COM port, this allows you to use your terminal or Internet dialer software with the USB modem.
| |
| | |
| DEVICE=C:\OS2\BOOT\USBCOM.SYS <parameters>
| |
| | |
| '''Parameters:'''
| |
| | |
| * /N:Value
| |
| Here can you control under which COM port number the USB device is available. Value can be in the range from 1 to 9 . It had to be a non used COM port number. The default value is the first non used COM port number.
| |
| | |
| * /V
| |
| With this parameter gives the driver you some status information during the boot.
| |
| | |
| * /M:<X>
| |
| X=Number of USB Modems to be used at the same time
| |
| | |
| * /I:<X>
| |
| X = Size of Inbuffer in kB
| |
| | |
| * /O:<X>
| |
| X = Size of Outbuffer in kB
| |
| | |
| '''TIP:''' By William L. Hartzell: Know that you can assign an alias to the USB port by using /N:COMx at the end of the USBCOM driver line. Thus it becomes useable with software that does not know about USB ports. You will need one driver line per modem.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBETHR.OS2=
| |
| USB Ethernet Adapter.
| |
| | |
| DEVICE=USBETHR.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=USBKBD.SYS=
| |
| USB Keyboard driver.
| |
| | |
| DEVICE=<drive>:\OS2\BOOT\USBKBD.SYS
| |
| | |
| Where drive: is the drive letter of the OS/2 boot partition on your system.
| |
| | |
| '''Paramenters:'''
| |
| | |
| * /V
| |
| Verbose Mode, displays driver information during OS/2 initialization.
| |
| | |
| * /DEVICE:n
| |
| Parameter is added to select which USB device to serve in multidevice configurations (several keyboards devices attached to USB bus).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBMOUSE.SYS=
| |
| Driver for USB mouse. At the moment only some mouse from Logitech and IBM are supported.
| |
| | |
| DEVICE=C:\Os2\Boot\USBMOUSE.SYS <parameter>
| |
| | |
| '''PARAMETER:'''
| |
| * /V
| |
| Verbose Mode, displays driver information during OS/2 initialization.
| |
| | |
| * /DEVICE:n
| |
| Parameter is added to select which USB device to serve in multidevice configurations (several mice devices attached to USB bus).
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBPRT.SYS=
| |
| Driver for USB printers.
| |
| | |
| DEVICE=C:\OS2\BOOT\USBPRT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBRESMG.SYS=
| |
| OS/2 USB Resource Manager.
| |
| | |
| DEVICE=USBRESMG.SYS
| |
| | |
| The purpose of this driver is to show all connected USB devices with exception of USB-hubs connected to the system. It allows to view the USB Device Report and can thereby help a developer to see how a device registers at the system and try to find reasons why a certain device which should run with installed drivers doesn't or in the development of new drivers.
| |
| | |
| The author can be contacted at usbguy@netlabs.org
| |
| If you use this package to check why an USB device doesn't work even you have the right USB drivers installed, include the following information:
| |
| - Config.sys
| |
| - Device report
| |
| - Timestamp of the USB drivers (creation date size)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBSCAN.SYS=
| |
| USB-Scanner Device class driver by [[Maeda Haruyuki]].
| |
| | |
| DEVICE=USBSCAN.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBQSER.SYS=
| |
| | |
| DEVICE=C:\OS2\BOOT\USBQSER.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBSER.SYS=
| |
| USB Serial Converter Driver
| |
| | |
| DEVICE=C:\OS2\BOOT\USBSER.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /V
| |
| Verbose mode to display driver information.
| |
| | |
| | |
| List of supported and tested USB Serial Converters:
| |
| | |
| * USB Serial Converter on IBM Multi-Port USB Hub (part number 00N8216),
| |
| * Belkin F5U103 USB Serial Adapter,
| |
| * USB Serial Adapter on Belkin F5U116 USB Multi-Port Hub,
| |
| * USB Serial Adapter on Belkin F5U120 USB DockStation,
| |
| * D-Link DU-CS/DSB-S25 USB to Serial Converter Cable,
| |
| * Belkin F5U109 USB PDA Adapter (IBM model name 10K3822)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=USBWCM.SYS=
| |
| USB Wacom Tablet Device Class Driver.
| |
| | |
| DEVICE=USBWCM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=USLGENIO.SYS=
| |
| Driver for the TampV HappyPlayer, this driver can be used with TV-card which have a BT848, BT849, BT878 or a BT879 chip. This driver will not work with other TV applications.
| |
| | |
| DEVICE=C:\Apps\HappyTV\Uslgenio.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=V110.SYS=
| |
| Module for Teles ISDN Cards .
| |
| | |
| DEVICE=V110.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=V2GB.SYS=
| |
| The purpose of this driver is to provide a solution to the problem caused by the inability of many DOS programs to handle a partition in excess of 2GB in size. This causes spurious reports of insufficient disk space.
| |
| | |
| DEVICE=V2GB.SYS
| |
| | |
| Available for FREE at http://www.tavi.co.uk/os2pages/index.html
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=V8514A.SYS=
| |
| Virtual device driver for 8514 graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\Os2\Boot\V8514a.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VAD64.SYS=
| |
| Virtual Device driver used by ATI 3D Rage graficcards. Gives support for DOS and WIN-OS/2.
| |
| | |
| DEVICE=C:\OS2\Vad64.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VAPM.SYS=
| |
| Virtual device driver for Advanced Power Management used by DOS and Windows.
| |
| | |
| DEVICE=C:\Os2\Boot\Vapm.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VASPI.SYS=
| |
| Adaptec ASPI device drivers for SCSI support.
| |
| | |
| DEVICE=VASPI.SYS
| |
| | |
| After you have installed the driver(s) correctly and have restarted your system, you will find a new entry in the DOS settings of DOS program objects, ASPI_ENABLE. This parameter defines, if ASPI is available in the session started from this object. The default is OFF, i.e. the ASPI interface is NOT available. Please change this parameter for all those program objects which you use to start your (DOS and WIN-OS/2) ASPI applications to ON.
| |
| | |
| The default (OFF) can be changed globally to ON by adding the option /ON to the line DEVICE=C:\OS2\VASPI.SYS in your CONFIG.SYS. In this case all DOS and WIN-OS/2 sessions have ASPI available automatically, but you can still disable ASPI for each program object individually.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VASACOM1.SYS=
| |
| This driver was found on XTEL software configurations (version 5.6 (MINI X-TEL) and 6.0). This driver is for PLC usage.
| |
| | |
| Examples:
| |
| | |
| DEVICE=X:\OS2\VASACOM1.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VASPIDD.SYS=
| |
| Adaptec ASPI device drivers for SCSI support.
| |
| | |
| DEVICE=VASPIDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VAUDDRV.SYS=
| |
| DOS Soundcard-Driver.
| |
| | |
| DEVICE=VAUDDRV.SYS
| |
| | |
| '''Parameter:'''
| |
| | |
| * ES16881$ for Soundcards with ESS 1688 chip
| |
| * ES18681$ for Soundcards with ESS 1868 chip
| |
| * ES18691$ for Soundcrads with ESS 1869 chip
| |
| | |
| '''NOTE:''' the parameter is the link between the OS2 driver and the DOS driver. The DOS driver inherits it's settings associated with the parameter.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VBOXGUEST.SYS=
| |
| This driver is for OS/2-eComStation running as guest under a VirtualBox virtual machine. This driver is included on the VirtualBox Guest Additions virtual CD image.
| |
| Last version: 1.6.51 - 2008
| |
| | |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VBOXMOUSE.SYS=
| |
| This driver is for OS/2-eComStation running as guest under a VirtualBox virtual machine. It is the mouse pointer driver. This driver allows you to use the mouse directly inside the OS/2-eComStation virtual machine and switch back to the host machine without using the control-right key to release it.
| |
| This driver is included on the VirtualBox Guest Additions virtual CD image.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |No
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VBSAUDIO.SYS=
| |
| Virtual DOS Driver for the C-Media CMI 8330 soundcard.
| |
| | |
| DEVICE=VBSAUDIO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCADCMDR.SYS=
| |
| Ctrl-Alt-Del Commander DOS FS Game Boost Driver.
| |
| | |
| DEVICE=VCADCMDR.SYS
| |
| | |
| '''NOTE:''' It is reported that fixpak 13 for Warp 4 doesn't work correctly with this driver.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCAPI.SYS=
| |
| Teles Virtual DOS ISDN Capi Driver.
| |
| | |
| DEVICE=VCAPI.SYS
| |
| | |
| '''Note:''' Delete this driver when running Warp Server for E-Business or Fixpack 13 for Warp 4 otherwise you'll get a Trap.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCAPI20.SYS=
| |
| Elsa Virtual DOS ISDN Capi 2.0 Driver.
| |
| | |
| DEVICE=VCAPI20.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCAPIAVM.SYS=
| |
| AVM Virtual DOS Driver for the ISDN-Controllers B1 and Fritz.
| |
| | |
| DEVICE=VCAPIAVM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCDROM.SYS=
| |
| Virtual device driver for CDRom drives used by DOS and Windows.
| |
| | |
| DEVICE=C:\Os2\Boot\Vcdrom.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCFOS.SYS=
| |
| Gives support for CFOS in DOS and Windows.
| |
| | |
| DEVICE=C:\Cfos\Vcfos.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCGA.SYS=
| |
| Virtual device driver for CGA graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\Os2\Mdos\Vcga.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCOM.SYS=
| |
| Virtual device driver for the serial Ports COMx, used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VCOM.SYS
| |
| | |
| '''NOTE:''' If you are using COM3 and/or COM4, add the appropriate parameters to the COM.SYS line above only. It is not necessary to add any parameters to this line. VCOM.SYS inherits its parameters from the COM.SYS line.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VCOMPAT.SYS=
| |
| Compatibility VDD. It hooks itself into the middle of several APIs and it contains a magical VM patcher, that is able to patch out some buggy routines on-the-fly, which means the user won't notice that he got a broken program.
| |
|
| |
| DEVICE=C:\OS2\BOOT\VCOMPAT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VCSHDD.SYS=
| |
| Is needed for the video parts of MMOS2.
| |
| | |
| DEVICE=C:\Mmos2\Vcshdd.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VDISK.SYS=
| |
| As in DOS, this driver installs a RAM disk. In this example, the RAM disk is 512k with the sectors and directories parameters set at the default level (64-byte sectors and 64 directory entries). With DOS, a RAM disk could significantly improve system performance, but because OS/2 handles your memory far more efficiently than DOS and has its own sophisticated caching routines, using a RAM disk is not recommended.
| |
| | |
| '''CAUTION:''' Because a RAM disk takes available memory away from OS/2, you may negatively impact system performance on systems with less than 12MB of RAM. Unless you have lots of RAM or have a very specific need, don't install a RAM disk.
| |
| | |
| '''NOTE:''' If you do install VDISK.SYS and you also have EXTDSKDD.SYS installed, VDISK.SYS must be placed after EXTDSKDD.SYS in your config.sys file. Check your on-line Command Reference for information on EXTDSKDD.SYS.
| |
| | |
| '''TIP:''' Better use the RAM(64).IFS by Karl Olson, see IFS.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VDOSTCP.SYS=
| |
| Virtual device driver for the TCP/IP protocol used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VDOSTCP.SYS
| |
| | |
| '''Parameter:'''
| |
| * /C:x
| |
| x is the number of the serial port.
| |
| | |
| '''TIP:''' If you don't need TCP/IP support in DOS sessions REM this line.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VDOSTCP.VDD=
| |
| DOS API Driver for the TCP/IP protocol.
| |
| | |
| DEVICE=C:\OS2\BOOT\VDOSTCP.VDD
| |
| | |
| '''TIP:''' If you don't need TCP/IP support in DOS sessions REM this line.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VDPMI.SYS=
| |
| Supports the DPMI memory access and is required to support all Windows applications.
| |
| | |
| DEVICE=C:\OS2\MDOS\VDPMI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VDPX.SYS=
| |
| This driver is the protected mode to real mode driver for DPMI applications.
| |
| | |
| DEVICE=C:\OS2\MDOS\VDPX.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VDTA.SYS=
| |
| DOS Virtual device driver for the Data Transport Agent (DTA)
| |
| | |
| DEVICE=VDTA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VEGA.SYS=
| |
| | |
| Virtual device driver for EGA graphic cards used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VEGA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VEMM.SYS=
| |
| Used to support Extended Memory use in DOS and Windows programs.
| |
| | |
| DEVICE=C:\OS2\MDOS\VEMM.SYS <parameter>
| |
| | |
| '''Parameters:'''
| |
| * /S=n
| |
| Sets the limit of EMS memory in blocks of 1024k. Default is 2.
| |
| | |
| * /L=n
| |
| Size of conventional memory that can be remapped. Default is none.
| |
| | |
| * /F=nnnn
| |
| Memory frame address to be used to map EMS. Default is AUTO.
| |
| | |
| '''NOTE:''' Settings you specify in a DOS session will override these parameters.
| |
| | |
| '''NOTE:''' The VEMM.SYS device must be listed in your config.sys file before the VXMS.SYS device.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VFDISK.SYS=
| |
| Virtual Floppy Disk driver, it emulates a floppy drive in the memory. VFDISK by IBM is a virtual floppy disk device driver that allows track reading, writing, and formatting like a normal floppy disk (2.88 Mb,1.44 Mb,1.2 Mb, 360K, or 1.84Mb). This can be useful for automation of diskette image builds and for creating virtual floppies for one-time installs of distributed diskette images.
| |
| Can be found on OS/2 servicepak CD's, V 3.0 is maintained by [[Daniela Engert]]
| |
| | |
| DEVICE=C:\Os2\Boot\Vfdisk.sys <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * 1
| |
| 3.5" 1.44 Mb Floppy (default)
| |
| | |
| * 2
| |
| 5.25" 1.2 Mb Floppy
| |
| | |
| * 3
| |
| 3.5" 720 Kb Floppy
| |
| | |
| * 4
| |
| 3.5" 2.88 Mb Floppy
| |
| | |
| * 5
| |
| 5.25" 360K Floppy
| |
| | |
| * 6
| |
| 3.5" 1.84 Mb Floppy
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VGENAUD.SYS=
| |
| Generic WinOS/2 Audio Driver R0 VDD component.
| |
| | |
| DEVICE=VGENAUD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VHAPI.OS2=
| |
| [[Paul Kurr]] wrote the following. "This provides for Virtual HLLAPI support within VDM's (not sure about VMB's). This allows DOS programs that use the HLLAPI to access the HOST sessions running at the OS/2 level under comm mgr. So you can actually watch your comm mgr sessions in one window and your DOS program in another while they interact."
| |
| | |
| DEVICE=VHAPI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VIAAPM.SYS=
| |
| VIA KT266A power management.
| |
| | |
| DEVICE=VIAAPM.SYS
| |
| | |
| '''Note:''' Replace APM.SYS by APM_NH.SYS
| |
| | |
| Provides the following services:
| |
| * CPU idle hook for APM KPI (APM_IdleHookRtn).
| |
| * CPU throttling API.
| |
| | |
| The APM idle hook routine replaces the OS/2's standard idle operation (HLT x86 instruction). The reason for it is that HLT corresponds to ACPI "C1" level of CPU operation (CPU still connected to bus and consumes its full rated power). The "C2" level, provided by the idle hook, disconnects the CPU from its bus, dropping the power consumption by about 10 times and putting the CPU into so-called "Stop Grant state". CPU returns from this state in the same ways as from "C1", therefore the performance losses are insignificant.
| |
| | |
| The "throttling API" enables the user to slow down the CPU by selectively filtering out CPU clock cycles. In KT266A chipset, this method is particularly useful for cooling down the 8366 memory controller ("northbridge") which imposes a noticeable source of heat besides the CPU.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VIAUDD.SYS=
| |
| VIA audio sound system driver for the VIA Southbridge with built in AC97 Controller.
| |
| | |
| DEVICE=VIAUDD.SYS
| |
| | |
| '''NOTE:''' There are different drivers with the same name available. Please consult the readme delivered with the driver.
| |
| | |
| '''Parameter:'''
| |
| | |
| * /N:
| |
| Symbolic device name for binding with MMPM/2. This is automatically selected by MINSTALL.EXE. Defaults to VIAUD1$".
| |
| | |
| * /NO_IRQ_SHARING
| |
| Disable the IRQ sharing mode. Normally, VIAUDD.SYS automatically detects whether IRQ sharing is needed and performs the necessary setup.
| |
| | |
| * /!OEM
| |
| Prevent any special setup for AC'97 codec ICs. This parameter disables any vendor-specific setup done by the driver.
| |
| | |
| * /ALC|/!ALC
| |
| Override ALC-201A detection. Normally the driver detects the presence of ALC-201A automatically and performs the necessary setup; however, the presence of codec may be forced using /ALC or disabled with /!ALC (/!ALC is a synonym for /!OEM).
| |
| | |
| * /LFREQ|/AFREQ /LFREQ,
| |
| which is the default for chip revisions >=0x30, uses a modified frequency algorithm known from VIA drivers for Linux. /AFREQ, default for the older revisions, uses the officially documented algorithm known from ALSA driver. Use /LFREQ if the sound plays too slowly; use /AFREQ if the sound plays too fast or with interruptions.
| |
| | |
| * /VERBOSE
| |
| Verbose output, useful for troubleshooting or finding out the capabilities of a specific AC'97 solution. Shows if any step during initialization fails and makes a pause to let the user examine the results.
| |
| | |
| * /QUIET
| |
| Quiet initialization - display no messages at all.
| |
| | |
| * /R:
| |
| Configure Audio Codec '97 registers manually. This is intended for advanced users, as the IOCTL90 mixer interface should be usually enough for customization. The format of is:
| |
| | |
| =,,...
| |
| or
| |
| ..=value,...
| |
| | |
| Refer to AC'97 specification for a list of register values and their meanings.
| |
| | |
| '''Practical examples:'''
| |
| | |
| Enable the +20 dB microphone gain:
| |
| /R:0E=40
| |
| | |
| Enable simulated stereo (if supported):
| |
| /R:20=4000
| |
| | |
| Enable bass boost (if supported):
| |
| /R:20=1000
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VIPX.SYS=
| |
| This driver enables the Novell Netware IPX support for DOS based Netware utilities.
| |
| | |
| DEVICE=C:\NETWARE\VIPX.SYS
| |
| | |
| <b>Platform Support:</b>
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VKBD.SYS=
| |
| Virtual device driver for the keyboard used by DOS and Windows.
| |
| | |
| DEVICE=C:\Os2\Boot\Vkbd.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VLAN.OS2=
| |
| OS/2 Virtual LAN Kernal.
| |
| | |
| DEVICE=VLAN.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VLFN.SYS=
| |
| Driver for long filenames in DOS sessions.
| |
| | |
| DEVICE=VLFN.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VLFNMEM.SYS=
| |
| Driver for long filenames in DOS sessions.
| |
| | |
| DEVICE=VLFNMEM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VLTMODEM.SYS=
| |
| Lucent Technologies Virtual DOS Modem Driver, V. 5.55 Beta 3.
| |
| Available for FREE at http://www.drmartinus.de/notebook2/notebook.htm
| |
| | |
| DEVICE=VLTMODEM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMAD16.SYS=
| |
| Virtual device driver for the MAD16 soundcard used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VMAD16.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMANWIN.SYS=
| |
| This driver is used by your Graphic card to support Windows.
| |
| | |
| DEVICE=C:\OS2\MDOS\VMANWIN.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMDRV.SYS=
| |
| This driver is used by Microsoft Virtual PC. Called OS/2 Additions Driver.
| |
| | |
| DEVICE=C:\VM\VMDRV.SYS
| |
| | |
| '''Parameters:'''
| |
| | |
| * /Q
| |
| Quiet Mode: Disable messages at boot.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |??
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMGAX64.SYS=
| |
| Virtual device driver for Matrox graphic cards.
| |
| | |
| DEVICE=C:\MGA\OS2\VMGAX64.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VMMOUSE.SYS=
| |
| This is Mouse Driver included on Microsoft Virtual Machine Additions for OS/2. This one allows to automatic switch from Windows to OS/2 running on Microsoft Virtual PC and viceversa without pressing the host key.
| |
| | |
| DEVICE=C:\VM\VMMOUSE.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMODEM.SYS=
| |
| Ray Gwinn's Virtaul Modem device driver.
| |
| | |
| DEVICE=VMODEM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMONO.SYS=
| |
| Virtual device driver mono-graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VMONO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMOUSE.SYS=
| |
| Virtual device driver for the mouse used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VMOUSE.SYS
| |
| | |
| '''NOTE:''' If you don't have this line (or you REM'd it), you will not have mouse support in your DOS sessions.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMPU401.SYS=
| |
| Virtual DOS MPU401 driver.
| |
| | |
| DEVICE=VMPU401.SYS
| |
| | |
| '''Parameter:'''
| |
| * MPU4011$
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VMVDD.SYS=
| |
| This driver comes with Microsoft Virtual Machine Additions for OS/2 for MS Virtual PC 2007.
| |
| | |
| DEVICE=C:\VM\VMVDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |???
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VNETAPI.OS2=
| |
| This driver is part of the File and Print client for OS/2.
| |
| | |
| [[Paul Kurr]] wrote: "This sets up the virtual network support API within the VDM's (not VMB's). This allows DOS programs running within a VDM to "see" that the network is loaded, and interact with it (get/set redirections and such). If VDOLANAPI support is required in a VMB the device driver VNETAPI.SYS needs to be loaded within the VMB (this is found in \IBMLAN\NETPROG)."
| |
| | |
| DEVICE=C:\IBMLAN\NETPROG\VNETAPI.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VNETAPI.SYS=
| |
| [[Paul Kurr]] wrote: "This sets up the virtual network support API within the VDM's (not VMB's). This allows DOS programs running within a VDM to "see" that the network is loaded, and interact with it (get/set redirections and such). If VDOLANAPI support is required in a VMB the device driver VNETAPI.SYS needs to be loaded within the VMB (this is found in \IBMLAN\NETPROG)."
| |
| | |
| DEVICE=VNETAPI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VNPX.SYS=
| |
| This device driver works _with_ your systems math coprocessor. If you do not have a math coprocessor, this driver will not load. Some have suggested that if you add it to your config.sys you will see an enhancement in your systems performance. Not so. There is no reason for it to be added to your config.sys file. IF YOU HAVE A MATH COPROCESSOR, OS/2 WILL LOAD THIS DRIVER AUTOMATICALLY. If you add it to your config.sys file, a second copy of the driver will be loaded. In doing so, many have reported that no DOS programs would run. DO NOT ADD THIS STATEMENT TO YOUR CONFIG.SYS FILE.
| |
| | |
| DEVICE=VNPX.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| | |
| =DEVICE=VP9100.SYS=
| |
| Virtual device driver for Weitek P9100 based graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VP9100.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VP91VGA.SYS=
| |
| Virtual device driver for Weitek P9100 based graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VP91VGA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VPC.SYS=
| |
| Virtual Dos Driver of Process Commander.
| |
| | |
| DEVICE=VPC.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VPCAPP.SYS=
| |
| InnoTek Virtual PC for OS/2 Application driver. Virtual PC for OS/2 allows you to run additional operating systems on top of your OS/2 system. It is based on Virtual PC by Connectix Corporation, delivering the most advanced virtualization technology available.
| |
| | |
| DEVICE=VPCAPP.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VPCMCIA.SYS=
| |
| This driver gives support for PCMCIA cards in DOS and Windows sessions.
| |
| | |
| DEVICE=C:\OS2\BOOT\VPCMCIA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VPICPARM.SYS=
| |
| Some applications like PCAS (and some terminal emulators) have problems sharing IRQ9 in a VDM. Since the DOS Virtual Device drivers are not loaded out of CONFIG.SYS, a new device driver VPICPARM.SYS has been added starting with Warp 3 FixPak 38 and Warp 4 FixPak 8.
| |
| | |
| To prevent sharing of IRQ9 in a VDM, add the device in config.sys: Next, in the settings for the program that requires exclusive access to IRQ9, set the DOS setting HW_SHARE_IRQ9 to ON. When you next boot your system, VDMs will not share IRQ
| |
| | |
| DEVICE=VPICPARM.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VPRPMI.SYS=
| |
| Private video PMI virtual device driver. GRADD Display Drivers - generic DOS part.
| |
| Some laptops, including those that use the Intel i845, the S3 Savage/IX or S3 SuperSavage chipsets, will require an additional driver for full LCD BIOS support. When booting with the LCD panel active, if the OS/2 System object does not display refresh rate selection, and/or displays video modes larger than your LCD panel, then you need this driver. This driver should not be required for the"Convenience Pak" releases of OS/2 Warp 4 and WSeB.
| |
| | |
| DEVICE=C:\OS2\MDOS\VPRPMI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VSHELL.SYS=
| |
| This dricver loads the Novell Netware network shell. It is automatically used for all DOS and Windows sessions that require it.
| |
| | |
| DEVICE=C:\NETWARE\VSHELL.SYS <parameter>
| |
| | |
| '''Parameters:'''
| |
| | |
| * Value can be Global or Local .
| |
| * Default = Global
| |
| | |
| * :Li. Global
| |
| All DOS, Windows and OS/2 sessions set up for global login support share a single login to a Netware server. Drive mappings and port captures from one session apply to all the other sessions. This is useful in environments where the number of connections is carefully monitored. :Li. Local
| |
| All DOS and Windows sessions set up for private login support have their own logins to a Netware server. Drive mappings and port captures from one session do not apply to the other sessions. This is useful in environments where users need logins from DOS and Windows sessions to be separate from logins from OS/2 sessions.
| |
| | |
| You can change this parameter also in the DOS/Windows settings of each Program object.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VSIO.SYS=
| |
| Virtual device driver for the serial ports COMx used by DOS and Windows. This is a replacement for the Vcom.sys driver.
| |
| | |
| DEVICE=C:\Os2\Boot\VSIO.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VSIO2K.SYS=
| |
| Excellent replacement driver for VCOM.SYS. If you utilize communications software on a regular basis at high speeds (e.g. 14,400), then the SIO2K drivers are the way to go. Be sure you have REM'd out VCOM.SYS when using. SIO2K.SYS and VSIO2K.SYS are Shareware, not Freeware. See also SIO2K.SYS.
| |
| | |
| DEVICE=VSIO2K.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VSND931.SYS=
| |
| OPTiSound 82C931 Virtual Audio Card Driver.
| |
| | |
| DEVICE=VSND931.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VSVGA.SYS=
| |
| Virtual device driver for SVGA graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VSVGA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VVGA.SYS=
| |
| Virtual device driver for VGA graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\Os2\Boot\Vvga.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VVTCAPT.SYS=
| |
| TVShow Video Capturing driver. Available at: http://os2.kiev.ua
| |
| | |
| DEVICE=VVTCAPT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VW32S.SYS=
| |
| Supplies support for the WIN32S Windows APIs. Only needed for Windows programs that use WIN32S APIs.
| |
| | |
| DEVICE=C:\OS2\MDOS\VW32S.SYS
| |
| | |
| '''NOTE:''' This driver has no parameters.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VWCAT.SYS=
| |
| This driver is used by the Watchcat task killer.
| |
| | |
| DEVICE=C:\user\watchcat\Vwcat.sys
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VWIN.SYS=
| |
| This driver provides seamless Windows support in Win-OS2.
| |
| | |
| DEVICE=C:\OS2\MDOS\VWIN.SYS
| |
| | |
| '''Platform Support:'
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VX00.SYS=
| |
| Old version of Ray Gwinn's communication driver, needed by some DOS-VDM programs.
| |
| | |
| '''TIP:''' by [[Mike Luther]]
| |
| To load it together with the later version of VMODEM.SYS from SIO2K these entries must be done:
| |
| | |
| rem device=C:\sio2k\esp.sys logfile=C:\sio2k\sio2k.log NoPause
| |
| device=C:\sio2k\uart.sys logfile=C:\sio2k\sio2k.log
| |
| device=C:\sio2k\vsio2k.sys logfile=C:\sio2k\vsio2k.log _ vIrqList(2=3,1=4,3=12)
| |
| device=C:\sio2k\vx00.sys
| |
| device=C:\sio2k\vmodem.sys logfile=C:\sio2k\sio2k.log NoPause nPorts=1
| |
| device=C:\sio2k\sio2k.sys logfile=C:\sio2k\sio2k.log
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VXGA.SYS=
| |
| Virtual device driver for XGA graphiccards used by DOS and Windows.
| |
| | |
| DEVICE=C:\OS2\BOOT\VXGA.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=VXMS.SYS=
| |
| Supports Extended Memory in DOS and Windows applications. XMS allows DOS programs to access more than one MB of memory.
| |
| | |
| DEVICE=C:\OS2\MDOS\VXMS.SYS <parameter>
| |
| | |
| '''Parameters:'''
| |
| | |
| * /UMB
| |
| Upper memory block support in DOS sessions.
| |
| | |
| * /NOUMB
| |
| No upper memory block support.
| |
| | |
| * /XXMLIMIT=m,n
| |
| Indicates the total system wide memory limit.
| |
| | |
| * /HMAMIN=m
| |
| Sets the minimum request size for high memory, from 1k to 63k.
| |
| | |
| * /NUMHANDLES=m
| |
| Sets the number of handles in each DOS session, from 1 to 128.
| |
| | |
| '''NOTE:''' The VXMS.SYS device must be listed in your config.sys file after the VEMM.SYS device.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| | |
| =DEVICE=VYMF724.SYS=
| |
| Virtual DOS YAMAHA YMF724 sound card driver.
| |
| | |
| DEVICE=VYMF724.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=W840ND.OS2=
| |
| Winbond W89C840 Based 100M/10M PCI Ethernet Adapter.
| |
| | |
| DEVICE=W840ND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=W940ND.OS2=
| |
| PCI Network Device driver for Winbond W89C940 based PCI Ethernet Adapters.
| |
| | |
| DEVICE=W940ND.OS2
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WACOMOS2.SYS=
| |
| Pen for OS/2 Device Driver for Wacom SD-501.
| |
| | |
| DEVICE=WACOMOS2.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WARPDRVR.SYS=
| |
| Driver for TVShow.
| |
| | |
| DEVICE=WARPDRVR.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WATCHCAT.SYS=
| |
| This driver is used by the Watchcat task killer.
| |
| | |
| DEVICE=C:\USER\WATCHCAT\WATCHCAT.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WCAST.SYS=
| |
| This driver gives support for all PCI Hauppauge TV-cards. The USB versions are NOT supported.
| |
| | |
| DEVICE=C:\MMOS2\WCAST.SYS <parameter>
| |
| | |
| '''Parameter:'''
| |
| | |
| * /M=xxxxx
| |
| memory address
| |
| | |
| * /I=xx
| |
| Interrupt address
| |
| | |
| * /P=xxx
| |
| IO Port address
| |
| | |
| * /N=x
| |
| Device Number
| |
| | |
| * /D=x
| |
| DMA Channel
| |
| | |
| * /F=Filename
| |
| Initialisation file
| |
| | |
| * /X or /X1
| |
| Force install, access hardware if present
| |
| | |
| * /X2
| |
| Force install, access hardware even if not present
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WCPCI.SYS=
| |
| WatchCard PCI Watchdog driver by [[Juergen Dittmer]].
| |
| | |
| '''NOTE:''' This driver is not supported by the manufacturer and the author of this software is not related to this company.
| |
| | |
| DEVICE=WCPCI.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WIN32K.SYS=
| |
| Win32k - Odin32 Ring 0 PE loader/converter for OS/2.
| |
| | |
| DEVICE=WIN32K.SYS
| |
| | |
| Odin is a free Open Source project with the goal to eventually provide a fully working Win32 (Win 95/98/NT/2000) runtime environment, making it possible to run your favorite Windows programs under OS/2, as if they were native OS/2 programs. The second goal of Odin is to provide the full Win32 application programming interface (API) so that it is possible to build OS/2 programs using Windows source code.
| |
| | |
| Available at: http://odin.netlabs.org
| |
| | |
| The win32k.sys driver makes PE (Win32) executables equal to native OS/2 executables by implementing a Ring 0 on-the-fly converter. The converter is Pe2Lx.exe. So, everything that works with Pe2Lx will probably work with win32k.sys. And vice versa, when Pe2lx can't handle it, win32k.sys won't either.
| |
| | |
| You may wonder how you may run a Win32 program using a device driver. You
| |
| don't have to worry about that, simply treat the Win32 program just as an another OS/2 program. OS/2 can't tell the difference! No conversion of dlls or running programs thru Pe.EXE.
| |
| | |
| '''Parameter:'''
| |
| * Quited Quiet driver initiation. Default: disabled (ie. -V)
| |
| * Verbose Verbose driver initiation. Default: enabled
| |
| * -S: Full path to the current OS/2 kernel symbol file. When this is specified the given Default: symbol "database" and default locations are searched.
| |
| | |
| | |
| '''Loader parameters:'''
| |
| | |
| * -SCript: Enable / disable UNIX script support. Default: Enabled.
| |
| * -REXX: Enable / disable pure REXX script support. Default: Enabled.
| |
| * -Java: Enable / disable JAVA loading.
| |
| * -PE: Enabled / disable and set mode of the PE loading.
| |
| MIXED: Mix of Pe2Lx and Pe.exe. It uses Pe2Lx when possible and backs out to pe.exe if the executables aren't supported by the converter.
| |
| * PE2LX: Pe2Lx loader only.
| |
| * PE: Pe.exe only. The program is started using Pe.exe, and the process name will be pe.exe.
| |
| * NOT: Disable PE loading.
| |
| | |
| '''Logging parameters:'''
| |
| * -L<:E|:D> Enables/Disables logging. Default: disabled.
| |
| * -Com:<1|2|3|4> or -C<1|2|3|4> Which com-port to log to. Default: -C2
| |
| * -Warning:<1|2|3|4> or -W<1|2|3|4> Warning/info level for PE loader. (This is warnings and info which is published thru the com-port as logging information.) Default: -W0
| |
| | |
| | |
| '''Heap parameters:'''
| |
| * HEAPMax: Maximum swappable heap size in bytes. Default: 512KB
| |
| * Heapinit: Initial heapsize in bytes. Default: 16MB
| |
| * RESHEAPMax: Maximum resident heap size in bytes. Default: 256KB
| |
| * Resheapinit: Initial resident in bytes. Default: 16MB
| |
| | |
| '''OS/2 Loader parameter:'''
| |
| | |
| * -Dllfixes<:E|:D> Enables or Disables the long DLL name and non .DLL extention fixes. OS/2 DLLs have been limited to 8 chars names since version 2.. This is a very bad limitation. Also OS/2 forces all DLL loaded to loadtime to have the extention '.DLL'. Both these retritions are removed if this option is enabled. For DLL with non .DLL extention the internal name must have to the extention included. (If you the experiences problems with IMPLIB.EXE, enclose the internal name in double-quotes.) You should not make a DLL with a name starting with DOSCALLS, DOSCALLS1, IBMVGA32, IBMDEV32 or IBMXGA32. Current state for this feature is EXPERIMENTAL. Default: Enabled
| |
| | |
| | |
| '''Obsolete:'''
| |
| | |
| * -K: Ignored. Win32k scans the kernel image in memory!
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=WIPEDD.SYS=
| |
| BocaSoft WipeOut/2 screen saver program.
| |
| | |
| DEVICE=WIPEDD.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=XF86SUP.SYS=
| |
| Driver needed by XFree86/OS2, You will be unable to run XFree86/OS2 without the XF86sup.sys driver.
| |
| | |
| DEVICE=C:\XFree86\lib\XF86Sup.sys
| |
| | |
| '''TIP:''' See the excellent guide by [[Rob Fargher]] in Voice 2/99 for installing XFREE.
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=XMOUSE.SYS=
| |
| Enhanced mouse driver by Martin Lafaix. It is intended to replace the mouse.sys driver as included in the scrollms.exe package.
| |
| | |
| DEVICE=XMOUSE.SYS
| |
| | |
| Adds support for the following mouse types:
| |
| * Intellimouse Explorer (five buttons + wheel)
| |
| * Logitech MouseMan (three buttons)
| |
| * Logitech M-BJ58 Optical scroll mouse (three buttons + wheel)
| |
| * Logitech M-RG45 Cordless wheel mouse (three buttons + wheel)
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=YMF724.SYS=
| |
| PCI Yamaha YMF724 (DS-1) driver.
| |
| | |
| DEVICE=YMF724.SYS
| |
| | |
| '''TIP:''' Together with Daniela Engerts patchymf.zip the driver can support some more chips.
| |
| | |
| These are PCI vendor ID: 1073h (Yamaha)
| |
| | |
| * YMF724D (DS-1) 0004h
| |
| * YMF724F (DS-1) 000Dh
| |
| * YMF740C (DS-1L) 000Ch
| |
| * YMF744B (DS-1S) 0010h
| |
| * YMF754 (DS-1E) 0012h
| |
| | |
| If you need a mixer for it, there is the Free 724mix a simple mixer with a VIO-interface for YMF724-based sound cards. It also supports YMF724 compatible chips such as YMF740, YMF744 and YMF754. Available at http://os2.ru/projects/724mix/index.phtml.en
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
| | |
| =DEVICE=ZX312.SYS=
| |
| Zynx ZX312 PCI EtherAction NDIS Network Driver.
| |
| | |
| DEVICE=ZX312.SYS
| |
| | |
| '''Platform Support:'''
| |
| {| class="wikitable" style="text-align:center" border="1"
| |
| |-
| |
| !OS/2 2.x
| |
| !OS/2 3.0
| |
| !OS/2 4.0
| |
| !OS/2 4.5x
| |
| !eCS 1.x
| |
| !eCs 2.x
| |
| |-
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |Yes
| |
| |}
| |
|
| |
|
| [[Category:The Config.sys Documentation Project]] | | [[Category:The Config.sys Documentation Project]] |