EIDE2300.ADD: Difference between revisions
mNo edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
EIDE 2300PLUS VL-Bus disk controller driver. Adapter Driver for ST506/IDE DASD. | |||
==Syntax== | |||
BASEDEV = EIDE2300.ADD /A:0 /U:0 /DMASPEED:7 /U:1 /PIOSPEED:5 | BASEDEV=EIDE2300.ADD /A:0 /U:0 /DMASPEED:7 /U:1 /PIOSPEED:5 | ||
==Parameters== | ==Parameters== | ||
'''/A:''' | |||
:Adapter number | |||
'''/U:''' | |||
:Drive number | |||
'''/PIOSPEED:''' | |||
:Set the drive PIO speed. The PIO speed of drive is from 0 to 8 or A. | |||
'''/DMASPEED:''' | |||
:Set the drive DMA speed. The DMA speed of drive is from 0 to 8. If the drive does not have this feature, the switch will be ignored and the driver will automatically detect and set the speed of drive. | |||
==Remarks== | |||
'''NOTES:''' Only one speed mode can be specified per drive. | '''NOTES:''' Only one speed mode can be specified per drive. | ||
| Line 15: | Line 20: | ||
The driver will automatically detect and set the speed of drive if user doesn't specify it. | The driver will automatically detect and set the speed of drive if user doesn't specify it. | ||
==Links== | |||
* {{FileLink|EIDE_2300P_8-162.zip}} - 8.162 (1995-08-10) | |||
[[Category:BASEDEV Statements]] | [[Category:BASEDEV Statements]] | ||
Latest revision as of 04:16, 8 August 2025
EIDE 2300PLUS VL-Bus disk controller driver. Adapter Driver for ST506/IDE DASD.
Syntax
BASEDEV=EIDE2300.ADD /A:0 /U:0 /DMASPEED:7 /U:1 /PIOSPEED:5
Parameters
/A:
- Adapter number
/U:
- Drive number
/PIOSPEED:
- Set the drive PIO speed. The PIO speed of drive is from 0 to 8 or A.
/DMASPEED:
- Set the drive DMA speed. The DMA speed of drive is from 0 to 8. If the drive does not have this feature, the switch will be ignored and the driver will automatically detect and set the speed of drive.
Remarks
NOTES: Only one speed mode can be specified per drive.
Do not set a speed setting for the driver higher than the speed setting that the EIDE2300.EXE Install utility reported for your drive(s).
The driver will automatically detect and set the speed of drive if user doesn't specify it.
Links
- EIDE_2300P_8-162.zip - 8.162 (1995-08-10)