EPATCD.ADD: Difference between revisions

Latest revision as of 01:14, 8 August 2025

Product Support
OS/2 1.3
OS/2 2.0	S
OS/2 2.1	S
OS/2 2.11 SMP	S
OS/2 Warp 3	S
OS/2 Warp Connect	S
OS/2 Warp 4	S
OS/2 Warp Server for e-Business	S

Shuttle-EPAT parallel port to IDE adapter

Shuttle's Parallel-port adapters provide interface between the parallel port of the PC to either the SCSI or the IDE devices, apart from providing a pass-thru parallel-port on the adapter.

Syntax

BASEDEV=EPATCD.ADD

Parameters

/Rx: x=0 Nibble Fast; x=1 Nibble Normal; x=2 Nibble Slow; x=3 Uni Fast; x=4 Uni Normal; x=5 Uni Slow; x=6 Toshiba Fast; x=7 Toshiba Slow; x=8 PS/2 Fast; x=9 PS/2 Slow; x=10 EPP Normal; x=11 EPP Fast
/Wx: x=0 Write Fast, x=1 Write Normal, x=2 Write Slow, x=3 EPP Normal, x=4 EPP Fast
/Zx: The default EPP wait state programmed by the ADD Driver is 2.; To change the wait state, give the appropriate value in '/Zx'. For example, to program the EPP Shuttle to zero wait, use '/Z0'.; Valid range of x : 0 to 9.
/de: Disables the EPP automatic detection during the initialization of the Driver.
/da: Disables auto-detection. With no command line options, the driver defaults to 'Nibble Slow' and 'Write Slow' modes.
/dp: Disables PS/2 DMA arbitration.
/fe: Force EPP mode
/fp: Force PS/2
/fb: Enables Bi-directional capability in some EISA chipset machines

@@ Line 1: / Line 1: @@
+{{ProdS |V20=S|V21=S|V22=S|V30=S|V31=S|V40=S|V45=S}}
 Shuttle-EPAT parallel port to IDE adapter
 Shuttle's Parallel-port adapters provide interface between the parallel port of the PC to either the SCSI or the IDE devices, apart from providing a pass-thru parallel-port on the adapter.
+==Syntax==
   BASEDEV=EPATCD.ADD
-{{ProdS |V20=S|V21=S|V22=S|V30=S|V31=S|V40=S|V45=S}}
-==Parameter==
+==Parameters==
-* /Rx
+;/Rx
-*:x=0 Nibble Fast
+:x=0 Nibble Fast
-*:x=1 Nibble Normal
+:x=1 Nibble Normal
-*:x=2 Nibble Slow
+:x=2 Nibble Slow
-*:x=3 Uni Fast
+:x=3 Uni Fast
-*:x=4 Uni Normal
+:x=4 Uni Normal
-*:x=5 Uni Slow
+:x=5 Uni Slow
-*:x=6 Toshiba Fast
+:x=6 Toshiba Fast
-*:x=7 Toshiba Slow
+:x=7 Toshiba Slow
-*:x=8 PS/2 Fast
+:x=8 PS/2 Fast
-*:x=9 PS/2 Slow
+:x=9 PS/2 Slow
-*:x=10 EPP Normal
+:x=10 EPP Normal
-*:x=11 EPP Fast
+:x=11 EPP Fast
-* /Wx - x=0 Write Fast, x=1 Write Normal, x=2 Write Slow, x=3 EPP Normal, x=4 EPP Fast
+;/Wx
-* /Zx - The default EPP wait state programmed by the ADD Driver is 2.
+:x=0 Write Fast, x=1 Write Normal, x=2 Write Slow, x=3 EPP Normal, x=4 EPP Fast
-*:To change the wait state, give the appropriate value in '/Zx'. For example, to program the EPP Shuttle to zero wait, use '/Z0'.
+;/Zx
-*:Valid range of x : 0 to 9.
+:The default EPP wait state programmed by the ADD Driver is 2.
-* /de - Disables the EPP automatic detection during the initialization of the Driver.
+:To change the wait state, give the appropriate value in '/Zx'. For example, to program the EPP Shuttle to zero wait, use '/Z0'.
-* /da - Disables auto-detection. With no command line options, the driver defaults to 'Nibble Slow' and 'Write Slow' modes.
+:Valid range of x : 0 to 9.
-* /dp - Disables PS/2 DMA arbitration.
+;/de
-* /fe - Force EPP mode
+:Disables the EPP automatic detection during the initialization of the Driver.
-* /fp - Force PS/2
+;/da
-* /fb - Enables Bi-directional capability in some EISA chipset machines
+:Disables auto-detection. With no command line options, the driver defaults to 'Nibble Slow' and 'Write Slow' modes.
+;/dp
+:Disables PS/2 DMA arbitration.
+;/fe
+:Force EPP mode
+;/fp
+:Force PS/2
+;/fb
+:Enables Bi-directional capability in some EISA chipset machines
 [[Category:BASEDEV Statements]][[Category:Adapter Device Drivers]]