MIDILAB.SYS: Difference between revisions
Created page with "MidiLab/2 Device Driver. DEVICE=<path>\MIDILAB.SYS ii aaa ;ii :is the interrupt for which the MPU hardware is wired. Default is 5. ;aaa :is the port address for your MIDI hardware device. Default is hex 330. ;/Z :Should be used to avoid warning messages. These values must be entered as hex numbers. An example of an installation with IRQ 10 and Address of hex 330 would be: DEVICE=C:\MLABPM\MIDILAB.SYS A 330 Category:DEVICE Statements Category:Multimedia..." |
(No difference)
|
Latest revision as of 16:48, 7 August 2025
MidiLab/2 Device Driver.
DEVICE=<path>\MIDILAB.SYS ii aaa
- ii
- is the interrupt for which the MPU hardware is wired. Default is 5.
- aaa
- is the port address for your MIDI hardware device. Default is hex 330.
- /Z
- Should be used to avoid warning messages.
These values must be entered as hex numbers. An example of an installation with IRQ 10 and Address of hex 330 would be:
DEVICE=C:\MLABPM\MIDILAB.SYS A 330