QUICKCAM.SYS: Difference between revisions

Latest revision as of 18:15, 4 October 2023

Quickcam Viewer driver for Connectix QuickCam™ B&W, Colour, ColourII, QuickCam VC or QuickCam Pro

NOTE: It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bidirectional modes, respectively. Bidirectional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used.

DEVICE=x:\path\QUICKCAM.SYS

@@ Line 1: / Line 1: @@
-Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro
+Quickcam Viewer driver for Connectix QuickCam™ B&W, Colour, ColourII, QuickCam VC or QuickCam Pro
-'''NOTE:''' It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bi-directional modes, respectively. Bi-directional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used.
+;NOTE: It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bidirectional modes, respectively. Bidirectional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used.
-Available at: http://www.cix.co.uk/~elad/qv2.htm
- DEVICE=QUICKCAM.SYS
-'''Platform Support:'''
+ DEVICE=x:\path\QUICKCAM.SYS
-{| class="wikitable"
-|-
-!OS/2 2.x
-!OS/2 3.0
-!OS/2 4.0
-!OS/2 4.5x
-|-
-|
-|Yes
-|Yes
-|Yes
-|}
 [[Category:DEVICE Statements]]