TRIOS2.ADD: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
Triones Bus Master EIDE/ATAPI Device Driver | Triones Bus Master EIDE/ATAPI Device Driver for Intel 82430FX/HX Chipset | ||
BASEDEV=TRIOS2.ADD [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]] | BASEDEV=TRIOS2.ADD [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]] | ||
| Line 36: | Line 36: | ||
|Not tested | |Not tested | ||
|} | |} | ||
[[Category:BASEDEV Statements]] | [[Category:BASEDEV Statements]] | ||
Latest revision as of 13:38, 23 July 2023
Triones Bus Master EIDE/ATAPI Device Driver for Intel 82430FX/HX Chipset
BASEDEV=TRIOS2.ADD [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]]
Parameters
- V
- Indicates to display verbose information.
- drive
- Specifies which drive to override on. It can be:
- PM primary/master
- PS primary/slave
- SM secondary/master
- SS secondary/slave
- dmamode
- specifies the overriding DMA mode. It can be:
- SW2 single word DMA mode 2
- MW1 multi-word DMA mode 1
- MW2 multi-word DMA mode 2
- NO not use DMA operation. The PIO will be used.
- piomode
- specifies the overriding PIO mode. It can be:
- 0 PIO mode 0
- 1 PIO mode 1
- 2 PIO mode 2
- 3 PIO mode 3
- 4 PIO mode 4
- If the pio_mode is specified, the driver will only use PIO operation on the corresponding drive.
- !lba
- indicates not to use LBA mode.
- !ms
- indicates not to use multi-sectors commands.
| OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
|---|---|---|---|
| Yes | Yes | Not tested | Not tested |