MVPRODD.SYS: Difference between revisions
mNo edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{ProdS |V21=S|V30=S|V31=S|V40=S|V45=S}} | |||
Driver for MediaVision's ProAudio Spectrum 16 sound card. The first driver is set for IRQ 11, DMA 3 with Sound Blaster support on IRQ 5 and DMA 1. | Driver for MediaVision's ProAudio Spectrum 16 sound card. The first driver is set for IRQ 11, DMA 3 with Sound Blaster support on IRQ 5 and DMA 1. | ||
DEVICE=\MMOS2\MVPRODD.SYS | DEVICE=\MMOS2\MVPRODD.SYS | ||
| Line 5: | Line 6: | ||
'''Warp NOTE:''' There may be a bug in Warp which causes problems in Win-OS/2 "seamless" mode. A solution is contained in SNDWOR.ZIP. | '''Warp NOTE:''' There may be a bug in Warp which causes problems in Win-OS/2 "seamless" mode. A solution is contained in SNDWOR.ZIP. | ||
[[Category:Multimedia Device Drivers]] | |||
Latest revision as of 19:15, 18 March 2022
| Product Support | |
|---|---|
| OS/2 1.3 | |
| OS/2 2.0 | |
| OS/2 2.1 | S |
| OS/2 2.11 SMP | |
| OS/2 Warp 3 | S |
| OS/2 Warp Connect | S |
| OS/2 Warp 4 | S |
| OS/2 Warp Server for e-Business | S |
Driver for MediaVision's ProAudio Spectrum 16 sound card. The first driver is set for IRQ 11, DMA 3 with Sound Blaster support on IRQ 5 and DMA 1.
DEVICE=\MMOS2\MVPRODD.SYS
Warp TIP: MediaVison's technical support indicates that the only correct settings for the PAS 16 in Warp is IRQ 11 and DMA 3. If you are experiencing static or white noise during bootup, MediaVison indicates that this is caused by using an IRQ other than 11 and DMA 3. They also indicate that the two device driver lines must be the last lines in the CONFIG.SYS file. Note that this information didn't solve the static problem for all users, but it did for some. Others have indicated that adding the /T:1 parameter solved their "white noise" problem.
Warp NOTE: There may be a bug in Warp which causes problems in Win-OS/2 "seamless" mode. A solution is contained in SNDWOR.ZIP.