MONMOU01.SYS: Difference between revisions

Latest revision as of 17:16, 29 August 2021

Serial Touchscreen Controller on PC-Bus System

DEVICE=MONMOU01.SYS <parameter>

Parameters

4035: for the IntelliTouch E281-4035 PC-Bus controller.
4025: for the IntelliTouch E281{A}-4025 PC-Bus controllers.
2201: for the AccuTouch E271-2201 PC-Bus con troller.
141: for the AccuTouch E271-141 PC-Bus controller.

matches the jumper settings on the controller.

matches the interrupt jumper on the controller.

Note: Disabling the COM Drivers

If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.

Note: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.

@@ Line 2: / Line 2: @@
   DEVICE=MONMOU01.SYS <parameter>
-'''Parameter:'''
+==Parameters==
-where is:
+;4035:for the IntelliTouch E281-4035 PC-Bus controller.
-:4035 for the IntelliTouch E281-4035 PC-Bus controller.
+;4025:for the IntelliTouch E281{A}-4025 PC-Bus controllers.
-:4025 for the IntelliTouch E281{A}-4025 PC-Bus controllers.
+;2201:for the AccuTouch E271-2201 PC-Bus con troller.
-:2201 for the AccuTouch E271-2201 PC-Bus con troller.
+;141:for the AccuTouch E271-141 PC-Bus controller.
-:141 for the AccuTouch E271-141 PC-Bus controller.
 matches the jumper settings on the controller.
@@ Line 13: / Line 12: @@
 matches the interrupt jumper on the controller.
-'''NOTE:''' Disabling the COM Drivers
+;Note: Disabling the COM Drivers
 If you selected IRQ4 or IRQ3 for the touchscreen controller (the interrupts reserved for COM1 and COM2), move the DEVICE=COM.SYS and DEVICE=VCOM.SYS commands (if present) before the DEVICE= MONMOU03.SYS command in CONFIG.SYS. This prevents the COM drivers from displaying a message saying the COM port is unavailable. Add the flag (,0,0) to COM.SYS, where is 1 for IRQ4 or 2 for IRQ3.
+;Note: If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.
-'''NOTE:''' If you do not wish to have a mouse connected, change the "stype=elomou$" flag to "type=elomou$" on the DEVICE=MOUSE.SYS command.
-'''Platform Support:'''
-{| class="wikitable"
-|-
-!OS/2 2.x
-!OS/2 3.0
-!OS/2 4.0
-!OS/2 4.5x
-|-
-|No
-|No
-|Yes
-|Yes
-|}
 [[Category:DEVICE Statements]]