Jump to content

IRDD.SYS: Difference between revisions

From EDM2
Ak120 (talk | contribs)
Created page with "Installs the Infrared Device Driver at COM2. DEVICE=IRDD.SYS To print through that port, the driver INFRARED.PDR needs also to be installed. '''TIP:''' For Thinkpads th..."
 
Ak120 (talk | contribs)
mNo edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Installs the Infrared Device Driver at COM2.
Device driver supporting the infrared device installed on a IBM ThinkPad 755CE, 755CD, 755CDV, 755CV, 755CX, 755CS, 755CSE, 701C, and 701CS.
  DEVICE=IRDD.SYS
  DEVICE=IRDD.SYS
 
To print through that port, the driver INFRARED.PDR needs also to be installed.
To print through that port, the driver [[INFRARED.PDR]] needs also to be installed.


'''TIP:''' For Thinkpads the address and the IRQ should be added.
'''TIP:''' For Thinkpads the address and the IRQ should be added.
E.g. Device=C:\OS2\BOOT\IRDD.SYS 2F8 3. This is valid only if IRQ 3 isn't used yet. If it is, another one has to be chosen (with an appropriate I/O address).
E.g. DEVICE=\OS2\BOOT\IRDD.SYS 2F8 3. This is valid only if IRQ 3 isn't used yet. If it is, another one has to be chosen (with an appropriate I/O address).
To print through that port, the driver INFRARED.PDR needs to be installed by changing the Printer Output Port settings in the Printerdriver Properties.
To print through that port, the driver INFRARED.PDR needs to be installed by changing the Printer Output Port settings in the Printerdriver Properties.


'''Platform Support:'''
{| class="wikitable"
{| class="wikitable"
|-
|+Platform Support:
!OS/2 2.x
!OS/2 2.x
!OS/2 3.0
!OS/2 3.0

Latest revision as of 22:48, 18 August 2017

Device driver supporting the infrared device installed on a IBM ThinkPad 755CE, 755CD, 755CDV, 755CV, 755CX, 755CS, 755CSE, 701C, and 701CS.

DEVICE=IRDD.SYS

To print through that port, the driver INFRARED.PDR needs also to be installed.

TIP: For Thinkpads the address and the IRQ should be added. E.g. DEVICE=\OS2\BOOT\IRDD.SYS 2F8 3. This is valid only if IRQ 3 isn't used yet. If it is, another one has to be chosen (with an appropriate I/O address). To print through that port, the driver INFRARED.PDR needs to be installed by changing the Printer Output Port settings in the Printerdriver Properties.

Platform Support:
OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x
No Yes Yes Yes