QUICKCAM.SYS: Difference between revisions
Created page with "Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro '''NOTE:''' It is recommended that you set your parallel port to either ..." |
(No difference)
|
Revision as of 13:42, 27 November 2016
Quickcam Viewer driver for Connectix QuickCam (tm) B&W, Colour, ColourII, QuickCam VC or QuickCam Pro
NOTE: It is recommended that you set your parallel port to either AT-mode or EPP-mode for uni-directional or bi-directional modes, respectively. Bi-directional mode will give at least double the throughput compared to uni-directional mode. QuickCam VC and Pro: The parallel-port MUST be set to ECP-mode. Currently, interrupt and DMA settings are not used. Available at: http://www.cix.co.uk/~elad/qv2.htm
DEVICE=QUICKCAM.SYS
Platform Support:
| OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
|---|---|---|---|
| Yes | Yes | Yes |