SBCD2.ADD: Difference between revisions
Created page with "===SBCD2.ADD=== Creative Labs Sound Blaster CD-ROM interface device driver. BASEDEV=SBCD2.ADD <parameters> ===Parameter=== ;/P:nnn :Specifies the base I/O port address of th..." |
(No difference)
|
Revision as of 17:09, 9 October 2016
SBCD2.ADD
Creative Labs Sound Blaster CD-ROM interface device driver.
BASEDEV=SBCD2.ADD <parameters>
Parameter
- /P
- nnn
- Specifies the base I/O port address of the interface card. The value must be the same number as the port address selected by the jumper on the host interface card.
- /T
- nn
- Sets the adapter type connected to the CD-ROM drive. Supported value is: 2 = Creative Labs CD-ROM interface card (not Sound Blaster)
- /NS
- Disable drive select scan. Driver will not scan for more than one CD-ROM drive.
| OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
|---|---|---|---|
| Yes | Yes | Yes | Yes |