View source for UsbDeviceSetDescriptor

==Description==
'''Warning:''' Do NOT use this function unless you know your USB device supports it.

Executes the Standard Device Request that updates the Device Descriptor.

==Syntax==
<pre>
ulrc = UsbDeviceSetDescriptor(Handle,usLength,pucDescriptor)
</pre>

==Parameters==
; Handle : the Device Handle received from the previous UsbOpen.

; usLength : the desired number of bytes up to 18 for the whole Device Descriptor.

; pucDescriptor : the address of the variable containing the Device Descriptor.

==Return Code==
<pre>
0x0000 - NO_ERROR
</pre>
===Errors===
<pre>
0x0006 - ERROR_INVALID_HANDLE
0x0008 - ERROR_NOT_ENOUGH_MEMORY
0x0057 - ERROR_INVALID_PARAMETER
0x005F - ERROR_INTERRUPT
0x0122 - ERROR_TOO_MANY_HANDLES
0x0280 - ERROR_TIMEOUT
0x1B58 - USB_NOT_INIT
0x4000 - USB_IORB_REQUEST
0x80XX - USB_IORB_FAILED
0xFF0D - ERROR_INVALID_DATA
0xFF13 - ERROR_I24_INVALID_PARAMETER
0xFF13 - USB_IDC_PARMERR
0xFF18 - USB_IDC_ADDRINV
0xFF37 - ERROR_DEV_NOT_EXIST
0xFF5D - EROR_NO_ITEMS
0xFFA7 - ERROR_LOCK_FAILED
</pre>

==Remarks==
'''Warning:''' Do NOT use this function unless you know your USB device supports it.

==Example Code==
<pre>
//Code Snippet - UsbDeviceSetDescriptor
{
  APIRET ulrc;
  PUCHAR pucDescriptor;
  UCHAR ucDescriptor[18];
  USHORT usLength = sizeof(ucDescriptor);

  pucDescriptor = &ucDescriptor[0];
  ulrc = UsbDeviceSetDescriptor(Handle,usLength,pucDescriptor);
  printf("\nUsbDeviceSetDescriptor - ulrc: 0x%04X (%hu)",ulrc,ulrc);
  if (!ulrc) //success
  {
    int i; printf(" - DeviceDescriptor:\n");
    for (i=0;i<ucDescriptor[0];i++) printf("%02X",ucDescriptor[i]);
  }
}

</pre>

==Related Functions==
* [[UsbDeviceGetDescriptor]]
* [[UsbCtrlMessage]]
* [[UsbOpen]]

[[Category:USBCalls]]