View source for OpenGL on OS/2 - All About NURBS

Written by [[Perry Newhook]]

===All About NURBS===

==Introduction==

Well here we are again with another month of OpenGL programming. As promised, this month we describe NURBS, what they are for, and most importantly, how to use them. I hope everyone benefitted from last month's column. In it we described the different toolkits available to OpenGL programmers such as yourselves, so that you don't have to rely on any one compiler (or platform for that matter,) to create your applications.

==Background==

Ok, here we go. Before getting into the OpenGL implementation of NURBS, I will give a bit of background as to what they actually are. Since this is almost impossible without at least a bit of math, those who are not mathematically inclined can simply skip to the next section. Even if you don't like the math, this section will be useful because to create the effect that you want, you have to understand at least a bit of what is going on underneath. However, since this is not a computer science course, I will try to keep the math to only what is necessary.

NURBS stands for Non-Uniform Rational B-Spline. B-Spline is derived from the term basis spline. (Don't you love it when acronyms contain acronyms? If you do, come join the space program.) Now to understand this fully, let's go all the way back and describe the simple curve.

If you recall our OpenGL primitives, you may notice that a curve is not one of them. All we can really do in OpenGL is draw points, and line segments; all other OpenGL objects are made up from them (i.e. a triangle is simply three lines connected together and filled in. A polygon is an n-sided "triangle".) The curves that we have encountered so far are simply segmented with lines; the shorter the line segments the more accurate the curve. You would have noticed this with our previous examples when we used a wire cylinder and wire sphere.

If we wanted a really accurate curve so that we could not visually see the individual segments, we would need to specify a lot of individual line segments. If we wanted to show a smooth surface, we would have a large number of very small polygons. This would quickly get tedious and impractical for large scenes. Many curves and surfaces, however, can instead be described by a small number of parameters in a mathematical formula. A third order function would describe a unique curve with only three parameters. Such a surface could be described with nine parameters, and take up much less storage space than the equivalent surface described with polygons. The polygon surface would also only approximate the surface (because at some scale it still consists of flat polygons) while the mathematical version is perfectly accurate. In OpenGL we use evaluators to specify the points on the curve using only the control points.

==Evaluators==

OpenGL evaluators always make splines and surfaces based on a Bezier basis. If you create evaluators that use some other basis, they must be converted to a Bezier basis before you can use them with OpenGL. What is a Bezier function? Well, I'm glad you asked.

A Bezier curve is a vector based function of one variable in the form: <font color="#0000BB"></font>

   C(u) = [ X(u) Y(u) Z(u) ]

and a Bezier surface is a vector valued function of two variables: <font color="#0000BB"></font>

 
   S(u,v) = [ X(u,v) Y(u,v) Z(u,v) ]

For each u (and v for surfaces) C() and S() calculates a point on the curve or surface. To use an evaluator, define and enable a function C() or S() that you wish to use, and where you normally call glVertex(), call glEvalCoord1() or glEvalCoord2() instead.

The definition of the evaluator is done with the functions glMap1() for a one dimensional evaluator (a line) or glMap2() for a two dimensional evaluator (a surface). glMap1() uses the following equations that define a curve:

[[Image:OpenGL-equ1.gif]]

represents a Bernstein polynomial of degree n. Now if Pi represents a set of control points then:

[[Image:OpenGL-equ2.gif]]

represents a Bezier curve as u varies from 0 to 1. To allow the same curve to vary from u1 to u2 instead of 0 to 1, evaluate:

[[Image:OpenGL-equ3.gif]]

which is what is used by glMap1().

glMap1() is defined as follows: <font color="#0000BB"></font>

 
    glMap1( GLenum target, TYPE u1, TYPE u2, GLint stride,
            GLint order, const TYPE *points )

* target defines what the points represent, which can be vertices, colours, normals, or texture coordinates. This type must also be enabled or disabled with glEnable() or glDisable() in order to use it.
* u1 and u2 indicate the range of the variable u.
* stride is the number of values between control points
* order is the degree of the polynomial plus 1 and should be equal to the number of control points
* points is a pointer to the list of control points

Example code of how to use the above could be: <font color="#0000BB"></font>

 
   (inside initialization code)
   // initialize and enable the evaluators
   glMap1f( GL_MAP1_VERTEX_3, 0.0, 1.0, 3, 4, ctrlPoints );
   glEnable( GL_MAP1_VERTEX_3 );
 
   (inside paint routine)
   glBegin( GL_LINE_STRIP );
   for( int i=0; i<NUM_SEGMENTS; i++ )
           glEvalCoord1f( (GLfloat)i / NUM_SEGMENTS );

in the above, ctrlPoints would be a pointer to an array of four XYZ points.

Two dimensional evaluators are very similar, except where before we had just u, we now have u and v. This defines a surface instead of just a line. Instead of glMap1() and glEvalCoord1(), we call glMap2() and glEvalCoord2(). glMap2() has the following parameters: <font color="#0000BB"></font>

 
    glMap2( GLenum target, TYPE u1, TYPE u2, GLint ustride,
            GLint uorder, TYPE v1, TYPE v2, GLint vstride,
            GLint vorder, const TYPE *points )

the parameters mean exactly what they meant with glMap1() but now we have independent settings for both u and v.

==GLU NURBS Interface==

Instead of using evaluators directly, most applications use the NURBS interface provided by the OpenGL utility library. This interface removes much of the math from creating NURBS and hides it behind a few very simple to use functions.

Before calling any of the NURBS functions, we have to tell OpenGL that we are going to create a NURB. To do this simply call the function <font color="#0000BB"></font>
 
   nurbSurface = gluNewNurbsRenderer();

Every call to this function returns a pointer to a GLUnurbsObj, that must be used with each of the other NURBS interface functions. In this manner we can create any number of individual NURBS patches, and set properties for each independently.

To set the properties, we call (duh), gluNurbsProperty(). <font color="#0000BB"></font>

   gluNurbsProperty( GLUnurbsObj *nurb, GLenum property, GLfloat value );

property can be one of the following

; GLU_SAMPLING_TOLERANCE
: value specifies the maximum length in pixels of polygon edges. The smaller the number, the smoother looking the final image is but conversely, the longer it takes to render. The default is 50 pixels.
; GLU_DISPLAY_MODE
: defines how a NURB should be rendered. value can be any one of the following: GLU_FILL, GLU_OUTLINE_POLYGON, or GLU_OUTLINE_PATCH
; GLU_CULLING
: value is a Boolean. GL_TRUE means that a NURBS curve should be discarded prior to tesselation if its control points lie outside the current viewpoint. Default is GL_FALSE.
; GLU_AUTO_LOAD_MATRIX
: value is Boolean. GL_TRUE means that the NURBS code automatically uses the current projection, modelview and viewport matrices to compute sampling and culling matrices for each curve rendered. GL_FALSE requires the user to specify matrices with gluLoadSamplingMatrices().

For our example we will set the tolerance down to 25, and specify that the nurbs should be filled in. <font color="#0000BB"></font>

 
   gluNurbsProperty( nurbSurface, GLU_SAMPLING_TOLERANCE, 25.0 );
   gluNurbsProperty( nurbSurface, GLU_DISPLAY_MODE, GLU_FILL );

Now that we have the NURB set up, we just have to call the code that actually displays it. All NURB drawing functions have to be surrounded by a gluBeginSurface(), gluEndSurface() pair. The only parameter that these functions take is the pointer to the NURB object returned above.

The surface is actually drawn with the function gluNurbsSurface(). <font color="#0000BB"></font>

 
   gluNurbsSurface( GLUnurbsObj *nurb, GLint uKnotCount, GLfloat *uKnot,
                    GLint vKnotCount, GLfloat *vKnot, GLint uStride,
                    GLint vStride, GLfloat *ctrlArray, GLint uOrder,
                    GLint vOrder, GLenum type );

* nurb is the pointer to the NURBS object
* uKnotCount specifies the number of knots in the parametric u direction
* uKnot specifies an array of nondecreasing knot values in the u direction
* vKnotCount specifies the number of knots in the parametric v direction
* vKnot specifies an array of nondecreasing knot values in the v direction
* uStride specifies an offset between successive control points in the parametric u direction in ctrlArray
* vStride specifies an offset between successive control points in the parametric v direction in ctrlArray
* uOrder specifies the order of the NURBS surface in the u direction
* vOrder specifies the order of the NURBS surface in the v direction
* type specifies the type of surface which can be any valid two dimensional evaluator type such as GL_MAP2_VERTEX_3 or GL_MAP2_COLOR_4

If you wish to draw a curved line instead of a surface, you can call gluNurbsCurve(). The parameters have the same meaning as gluNurbsSurface() except there is only a u direction because it is one-dimensional. <font color="#0000BB"></font>

 
   gluNurbsCurve( GLUnurbsObj *nurb, GLint uKnotCount, GLfloat *uKnot,
                  GLint uStride, GLfloat *cttrlArray, GLint uOrder,
                  GLenum type );

For an example that has 26 knots and thirteen control points in each of the u and v directions, the code could look like: <font color="#0000BB"></font>

 
   gluBeginSurface( nurbSurface );
   gluNurbsSurface( nurbSurface, 26, knots, 26, knots, 13*3, 3,
                    &points[0][0][0], 13, 13, GL_MAP2_VERTEX_3 );
   gluEndSurface( nurbSurface );

Complete source code fo a simple example can be downloaded [glcol12a.zip  here]. For this sample we used the control points shown in the following image:

[[Image:OpenGL-points.gif]]

As we stated before, we can vary the quality of the rendered image by varying the NURB sampling tolerance. The following images show the resulting NURB in mesh and in solid form for varying tolerance values.

GLU_SAMPLING_TOLERANCE of 5:

[[Image:OpenGL-nurbs5m.gif]] [[Image:nurbs5.gif]]

GLU_SAMPLING_TOLERANCE of 25:

[[Image:OpenGL-nurbs25m.gif]] [[Image:nurbs25.gif]]

GLU_SAMPLING_TOLERANCE of 100:

[[Image:OpenGL-nurbs100m.gif]] [[Image:nurbs100.gif]]

==NURBS Trimming==

While a NURBS patch may follow the desired shape, the patch itself may extend outside of the desired render area. This is because the NURBS patch can be thought of as a rectangular rubber sheet stretched over the control points. While the sheet does stretch to the correct shape, the edges are still rectangular. The NURBS interface allows you to trim away any section, or multiple sections that are unwanted, leaving only the desired surface.

Trimming is performed by specifying a gluNurbsCurve() or a gluPwlCurve(). Since gluNurbsCurve() was described above, I will describe gluPwlCurve() here.

gluPwlCurve() creates a piecewise linear trimming curve for the NURBS object. <font color="#0000BB"></font>

 
   gluPwlCurve( GLUnurbsObj *nurb, GLint count, GLfloat *array,
                GLint stride, GLenum type );

* nurb is the pointer to the nurb object
* count specifies the number of points on the curve
* array specifies the array containing the curve points
* stride specifies an offset between points on the curve
* type specifies the type of the curve and can be one of GLU_MAP1_TRIM_2 or GLU_MAP1_TRIM_3

A trimming curve has to be surrounded by a gluBeginTrim(), gluEndTrim() pair, and because the trimming commands operate on the nurb, the commands must occur between the gluBeginSurface() and gluEndSurface() pair as well.

For the surface above, if we picked eight values for a trim curve, the resulting code could look like: <font color="#0000BB"></font>

 
   gluBeginSurface( nurbSurface );
   gluNurbsSurface( nurbSurface, ... );
 
   gluBeginTrim( nurbSurface );
     gluPwlCurve( nurbSurface, 8, (GLfloat *)trim, 2, GLU_MAP1_TRIM_2 );
   gluEndTrim( nurbSurface );
   gluEndSurface( nurbSurface );

To determine what is included and what is thrown away, simply remember that everything to the left is kept and everything to the right is trimmed. Curves have to be closed and if multiple curves are specified, then they cannot intersect. You can cut multiple holes out, and you can also create islands within holes by creating a curve in the opposite direction within a trimmed out section.

The complete code that shows trimming can be downloaded [glcol12trim.zip  here ].

==Conclusion==

Well that's it for this month. Be sure to check back again next time when we create a full application from start to finish, one that I'm sure you'll all enjoy.

[[Category:Languages Documents]]