View source for QSP100.SYS

Quatech QSP-100 PCMCIA Quad RS-232 Serial Port driver. 

 DEVICE=x:\path\QSP100.SYS <COM>
or
 DEVICE=x:\path\QSP100.SYS (port_number,base_address,irq)

No spaces should appear inside the parentheses.
The QSP-100 requires 32 bytes of I/O space, starting with the base address.
The first port resides in the first 8 bytes, the second in the next 8 bytes, and so on.
The irq is a decimal value from 2 to 15.


==Examples==
 DEVICE=x:\path\QSP100.SYS COM3
The client driver's first and only choice is to configure the QSP-100 to use COM3 through COM6.  Only one QSP-100 can be used.

 DEVICE=x:\path\QSP100.SYS COM3 COM7
The client driver's first choice is to configure the QSP-100 to use COM3 through COM6.  The second choice is to use COM7 through COM10.  Up to two QSP-100s can be used.

 DEVICE=x:\path\QSP100.SYS (3,100,5)
The client driver's first and only choice is to configure the QSP-100 for COM3 through COM6 (I/O addresses 100-11F hex), using IRQ 5. Configuration will fail if any of these resources are already in use. Only one QSP-100 can be used.

 DEVICE=x:\path\QSP100.SYS (3,300,4) (7,120,15)
The client driver's first choice is to configure the QSP-100 for COM3 through COM6 (I/O addresses 300-31F hex), using IRQ 4.  The second choice is to configure the QSP-100 for COM7 through COM10 (I/O addresses 120-13F hex), using IRQ 15.  Up to two QSP-100s can be used.