View source for EIDE2300.ADD

EIDE2300 Driver

Example:
 BASEDEV = EIDE2300.ADD /A:0 /U:0 /DMASPEED:7 /U:1 /PIOSPEED:5

==Parameters==
*A: - adapter number
*U: - drive number
*PIOSPEED: - Set the drive PIO speed. The PIO speed of drive is from 0 to 8 or A.
*DMASPEED: - Set the drive DMA speed. The DMA speed of drive is from 0 to 8. If the drive does not have this feature, the switch will be ignored and the driver will automatically detect and set the speed of drive.

'''NOTES:''' Only one speed mode can be specified per drive. 

Do not set a speed setting for the driver higher than the speed setting that the EIDE2300.EXE Install utility reported for your drive(s).

The driver will automatically detect and set the speed of drive if user doesn't specify it.

[[Category:BASEDEV Statements]]