PIIXIDE.ADD
From EDM2
Intel IDE Busmaster Driver, better use DANIS506.ADD or IBM1S506.ADD
BASEDEV=PIIXIDE.ADD
Product Support | |
---|---|
OS/2 1.3 | |
OS/2 2.0 | |
OS/2 2.1 | S |
OS/2 2.11 SMP | |
OS/2 Warp 3 | S |
OS/2 Warp Connect | S |
OS/2 Warp 4 | S |
OS/2 Warp Server for e-Business | S |
Parameters
- /A:x - Adapter Switch, where x is 0, 1, 2, or 3. This selects the adapter that will be referenced by subsequent switches.
- /U:x - Unit Switch, where x is 0, 1, 2, or 3. This selects the unit that will be referenced by subsequent switches.
- /!BM - Bus Master Disable Switch: This will disable the bus master DMA feature. This capability is fully auto-detected by the driver. If for any reason it is desirable to disable bus master DMA transfers, this switch can be used on a per adapter or per unit basis. If used after a /A:x switch but prior to any /U:x or /UNIT:x switch, then bus master DMA transfers will be disabled for all units on the adapter. If the bus master disable switch follows both /A:x and /U:x (or /UNIT:x) switches, then bus master DMA transfers will be disabled only on the specified unit.
All other option switches are same as for the "IBM1S506.ADD" driver.
Sample
BASEDEV=PIIXIDE.ADD /A:1 /U:1 /BM