Difference between revisions of "MouRegister"

From EDM2
Jump to: navigation, search
m
m
Line 7: Line 7:
 
;ModuleName (PSZ) - input : Address of the dynamic link module name. The maximum length is 9 bytes (including ASCIIZ terminator).
 
;ModuleName (PSZ) - input : Address of the dynamic link module name. The maximum length is 9 bytes (including ASCIIZ terminator).
 
;EntryName (PSZ) - input : Address of the dynamic link entry point name of a routine that receives control when any of the registered functions are called. The maximum length is 33 bytes (including ASCIIZ terminator).
 
;EntryName (PSZ) - input : Address of the dynamic link entry point name of a routine that receives control when any of the registered functions are called. The maximum length is 33 bytes (including ASCIIZ terminator).
;Mask (ULONG) - input : A mask of bits, where each bit set to 1 identifies a mouse function being registered. Bit values are:
+
;Mask (ULONG) - input : A mask of bits, where each bit set to 1 identifies a mouse function being registered.
  '''Bit        Description'''
+
31-22    Reserved, set to zero
+
21        MouSetDevStatus
+
20        MouFlushQue
+
19        MouInitReal
+
18        MouSetPtrPos
+
17        MouGetPtrPos
+
16        MouRemovePtr
+
15        MouDrawPtr
+
14        MouSetPtrShape
+
13        MouGetPtrShape
+
12        MouClose
+
11        MouOpen
+
10        Reserved
+
9        Reserved
+
8        MouSetEventMask
+
7        MouSetScaleFact
+
6        MouGetEventMask
+
5        MouGetScaleFact
+
4        MouReadEventQue
+
3        MouGetNumQueEl
+
2        MouGetDevStatus
+
1        MouGetNumMickeys
+
0        MouGetNumButtons
+
  
 
==Return Code==
 
==Return Code==
Line 63: Line 39:
  
 
The following list shows the relationship of the mouse API calls and the Function Code passed to either the Base Mouse Subsystem or a registered mouse subsystem.
 
The following list shows the relationship of the mouse API calls and the Function Code passed to either the Base Mouse Subsystem or a registered mouse subsystem.
MOU API calls   Function Code  
+
{|class="wikitable"
MouGetNumButtons 00H
+
!MOU API calls||Function Code||Function Mask
MouGetNumMickeys 01H
+
|-
MouGetDevStatus 02H
+
|MouGetNumButtons||00H||00000001H
MouGetNumQueEl   03H
+
|-
MouReadEventQue 03H
+
|MouGetNumMickeys||01H||00000002H
MouGetScaleFact 05H
+
|-
MouGetEventMask 06H
+
|MouGetDevStatus||02H||00000004H
MouSetScaleFact 07H
+
|-
MouSetEventMask 08H  
+
|MouGetNumQueEl||03H||00000008H
Reserved        09H
+
|-
Reserved        0AH
+
|MouReadEventQue||04H||00000010H
MouOpen         0BH
+
|-
MouClose         0CH
+
|MouGetScaleFact||05H||00000020H
MouGetPtrShape   0DH
+
|-
MouSetPtrShape   0EH
+
|MouGetEventMask||06H||00000040H
MouDrawPtr       0FH
+
|-
MouRemovePtr     10H
+
|MouSetScaleFact||07H||00000080H
MouGetPtrPos     11H
+
|-
MouSetPtrPos     12H
+
|MouSetEventMask||08H||00000100H
MouInitReal     13H
+
|-
MouFlushQue     14H
+
|MouGetHotKey||09H||00000200H
MouSetDevStatus 15H
+
|-
 +
|MouSetHotKey||0AH||00000400H
 +
|-
 +
|MouOpen||0BH||00000800H
 +
|-
 +
|MouClose||0CH||00001000H
 +
|-
 +
|MouGetPtrShape||0DH||00002000H
 +
|-
 +
|MouSetPtrShape||0EH||00004000H
 +
|-
 +
|MouDrawPtr||0FH||00008000H
 +
|-
 +
|MouRemovePtr||10H||00010000H
 +
|-
 +
|MouGetPtrPos||11H||00020000H
 +
|-
 +
|MouSetPtrPos||12H||00040000H
 +
|-
 +
|MouInitReal||13H||00080000H
 +
|-
 +
|MouFlushQue||14H||00100000H
 +
|-
 +
|MouSetDevStatus||15H||
 +
|}
 
A registered mouse sybsystem must leave the stack, on exit, in the exact state it was received.
 
A registered mouse sybsystem must leave the stack, on exit, in the exact state it was received.
  
 
==Bindings==
 
==Bindings==
=== C ===
+
===C===
 
<PRE>
 
<PRE>
 
#define INCL_MOU
 
#define INCL_MOU

Revision as of 16:30, 14 September 2019

This call registers a mouse subsystem within a session.

Syntax

MouRegister (ModuleName, EntryName, Mask)

Parameters

ModuleName (PSZ) - input 
Address of the dynamic link module name. The maximum length is 9 bytes (including ASCIIZ terminator).
EntryName (PSZ) - input 
Address of the dynamic link entry point name of a routine that receives control when any of the registered functions are called. The maximum length is 33 bytes (including ASCIIZ terminator).
Mask (ULONG) - input 
A mask of bits, where each bit set to 1 identifies a mouse function being registered.

Return Code

rc (USHORT) - return
Return code descriptions are:
  • 0 NO_ERROR
  • 385 ERROR_MOUSE_NO_DEVICE
  • 413 ERROR_MOUSE_INVALID_ASCIIZ
  • 414 ERROR_MOUSE_INVALID_MASK
  • 415 ERROR_MOUSE_REGISTER
  • 466 ERROR_MOU_DETACHED
  • 505 ERROR_MOU_EXTENDED_SG

Remarks

The Base Mouse Subsystem is the default mouse subsystem. There can be only one MouRegister outstanding for each session without an intervening MouDeRegister. MouDeRegister must be issued by the same process that issued MouRegister.

When any registered function is called, control is routed to EntryName. When this routine is entered, four additional values are pushed onto the stack. The first is the index number (Word) of the function being called. The second is a near pointer (Word). The third is the caller's DS register (Word). The fourth is the return address (DWord) to the mouse router. For example, if MouGetNumMickeys were called and control routed to EntryName, the stack would appear as if the following instructions were executed:

PUSH@ WORD    NumberOfMickeys
PUSH  WORD    DeviceHandle
CALL  FAR     MouGetNumMickeys
PUSH  WORD    Function Code
CALL  NEAR    Entry point in Mouse Router
PUSH  DS
CALL  FAR     EntryName.

When a registered function returns to the Mouse Router, AX is interpreted as follows:

AX = 0    No error. Do not invoke the Base Mouse Subsystem routine. Return AX = 0.
AX = -1   Invoke the BaseMouse Subsystem routine. Return AX = return code from the Base Mouse Subsystem.
AX = error (if not 0 or -1) Do not invoke the Base Mouse Subsystem Routine. Return AX = error.

When the mouse router receives a mouse call, it routes it to the Base Mouse Subsystem unless an application or other mouse subsystem has previously issued MouRegister for that call. If the call was registered, the subsystem is entered at the EntryName specified, and provided with the applicable function code.

The registered function mask is used to determine whether a requested function is performed by the registered mouse subsystem or default to the Base Mouse Subsystem.

The following list shows the relationship of the mouse API calls and the Function Code passed to either the Base Mouse Subsystem or a registered mouse subsystem.

MOU API calls Function Code Function Mask
MouGetNumButtons 00H 00000001H
MouGetNumMickeys 01H 00000002H
MouGetDevStatus 02H 00000004H
MouGetNumQueEl 03H 00000008H
MouReadEventQue 04H 00000010H
MouGetScaleFact 05H 00000020H
MouGetEventMask 06H 00000040H
MouSetScaleFact 07H 00000080H
MouSetEventMask 08H 00000100H
MouGetHotKey 09H 00000200H
MouSetHotKey 0AH 00000400H
MouOpen 0BH 00000800H
MouClose 0CH 00001000H
MouGetPtrShape 0DH 00002000H
MouSetPtrShape 0EH 00004000H
MouDrawPtr 0FH 00008000H
MouRemovePtr 10H 00010000H
MouGetPtrPos 11H 00020000H
MouSetPtrPos 12H 00040000H
MouInitReal 13H 00080000H
MouFlushQue 14H 00100000H
MouSetDevStatus 15H

A registered mouse sybsystem must leave the stack, on exit, in the exact state it was received.

Bindings

C

#define INCL_MOU

USHORT  rc = MouRegister(ModuleName, EntryName, Mask);

PSZ     ModuleName;    /* Module Name */
PSZ     EntryName;     /* Entry Name */
ULONG   Mask;          /* Function Mask */

USHORT  rc;            /* return code */

MASM

EXTRN   MouRegister:FAR
INCL_MOU            EQU 1

PUSH@  ASCIIZ  ModuleName    ;Module Name
PUSH@  ASCIIZ  EntryName     ;Entry Name
PUSH   DWORD   Mask          ;Function Mask
CALL   MouRegister

Returns WORD

Related Functions