Difference between revisions of "Creating modules for Doodle's Screen Saver - Part 3"

From EDM2
Jump to: navigation, search
(First version)
 
m
Line 96: Line 96:
  
 
Good luck with creating your new skins!
 
Good luck with creating your new skins!
 +
 +
[[Category:SOM Articles]]

Revision as of 22:24, 28 October 2011

Introduction

Starting with the v1.5 version of Doodle's Screen Saver, the package contains a new module called 'Pretty Clock'. This screen saver module shows a skinnable clock on the screen.

The purpose of this article is to describe the format used for the skins, so people might be able to create their own clock skins.

The basics

The Pretty Clock module assembles its clock image from five different layers. All these layers are transparent PNG files. These layers are the following:

  • Background
  • Hour marker
  • Minute marker
  • Second marker
  • Foreground

As you can imagine, a nice watch can be constructed using this method by putting the image of the watch to the background, putting the markers on top of it, then putting another transparent image on top of these to imitate the glass of the watch.

To Rotate Or Not To Rotate

Now, to make things a bit more flexible (and a bit more confusing), the drawing of the markers have been made special.

Imagine, that you have an image of the hour marker, pointing to 12:00. If the time is 06:00, then it has to be rotated by 180 degrees. However, if you want your marker to be very nice, you draw shadows to it, but a rotated version of this image will look ugly, because it will rotate the shadows, too.

So, it was decided that the skin designers can decide which statuses they want to draw. It's possible to draw 24 different images for the hour marker, one for each possible position of the marker. If the code finds an exact image for the given hour, it will use that one, or it will find the closest match, rotate that image, and use the rotated image.

The same applies to the minute and second markers. It's possible to have only one image of them, then that image will be rotated. However, it's also possible to draw all the possible positions of the markers, then those images will be used.

It's also possible to draw only some of the positions of the markers, like 0, 15, 30 and 45 minutes, or any combination you like, the missing ones will be created automatically by rotating the closest available image.

Simple, no?

Yes? Well, then here comes one more twirl.
As you might be aware, there are clocks where the hour and minute markers jump from one position to another, and there are ones where they slowly advance the next position as the time goes. This later case is called "analogue mode" in Pretty Clock, and both the hour and the minute markers can be told to work in analogue mode.

The skin descriptor file

You may ask now how to describe all these to the screen saver module?
Well, all these are described in a simple text file, which has the extension of ".skn". You will already find some skin files installed in "Modules\PrClock" subdirectory of the Doodle's Screen Saver home folder, now that's the place where you should copy your own skins to install them.

And now let's see the keywords you can use in the skin file:

Skin name

A short description or the name of the skin can be told by using the keyword "Skin_Name".
For example:

Skin_Name = Test skin by Doodle

Draw area

All the layers are drawn inside a so-called Draw Area. The draw area is a rectangular drawing space, in which all drawing is done. This area is moved around the screen as the screen saving goes, so your pretty clock will not be burned into the monitor.

The size of the Draw Area can be told by using the following keywords:

Draw_Area_Width = 256
Draw_Area_Height = 256

The images

All the images of the layers can be described by using two keywords for the given image. The first one tells the PNG file to use, for example:

Background_Image = test\test_back.png

(All the file paths are relative to the place of the skin file.)

The second one tells the center of the image, so the module will know how to rotate that image if needed. It's not used for the foreground and background images, but it can be used for the markers:

Hour_0_Image = test\test_stick.png
Hour_0_Image_Center = 128 128 64 64

The four numbers are: <CenterOffsetX> <CenterOffsetY> <CenterX> <CenterY>

The CenterX and CenterY values tell the center of the PNG image. The image will be rotated around this point, if it has to be rotated. Most of the times it's the center of the image, but it can be set so that the image will be rotated around its bottom or anything else.

The CenterOffsetX and CenterOffsetY values tell a coordinate inside the Draw Area, where the center of the image (given above) will be positioned. This is usually the center of the Draw Area.

Please note that all coordinates are relative to top-left corner, which is (0;0).

The following images can be specified:

"Background_Image" and "Background_Image_Center"
"Foreground_Image" and "Foreground_Image_Center"
"Hour_0_Image", "Hour_1_Image" ... "Hour_23_Image" and the corresponding "Hour_0_Image_Center", "Hour_1_Image_Center" ... "Hour_23_Image_Center"
"Minute_0_Image", "Minute_1_Image" ... "Minute_59_Image" and the corresponding "Minute_0_Image_Center", "Minute_1_Image_Center" ... "Minute_59_Image_Center"
"Second_0_Image", "Second_1_Image" ... "Second_59_Image" and the corresponding "Second_0_Image_Center", "Second_1_Image_Center" ... "Second_59_Image_Center"

Analogue modes

As it was already described, the hour and minute markers can work in "analogue mode", where they do not jump from one position to another, but slowly advance it. This can be turned on and off by setting the value of the following two keywords to 1 or 0:

Hour_Analogue_Mode = 1
Minute_Analogue_Mode = 1

Conclusion

As you can see, creating new clock skins is not hard. You only need some inspiration, some drawing tools, create your images, assemble your SKN file, and you're done.

All you have to take care is to make sure that all your PNG files are transparent! If a given PNG file is not transparent, it will not be loaded by Pretty Clock, so your skin will either not be loaded at all, or some parts of it will be missing.

Good luck with creating your new skins!