CONFIG.SYS - DEVICE Statements - ISDN Support
AVM
AVMB1.SYS
Driver for the AVM Active ISDN-Controller B1.
DEVICE=AVMB1.SYS
Parameter:
- /$ - If old programs needs the old naming convention (like an outdated CFOS).
NOTE: The passive AVM-Cards (like the Fritzcard) aren't supported by AVM with OS/2 Drivers.
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
ISDNBASE.SYS
AVM Fritz ISDN PCCard (aka PCMCIA) driver.
DEVICE=ISDNBASE.SYS <parameter>
Parameter:
- /S - Load Silent, no messages during Boot.
- /IRQ:xx - Specifies an Interrupt for the driver, e.g. /IRQ:10
- /IO:xxx - Specifies an IO-Address, whereby possible resources are 140 and 300
- /EXCL:xxxx - a bit mask definition of excluded interrupts, eg. /excl:F947
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
No | Yes | Yes | Yes |
ELSA
DSS1C20X.SYS
CAPI version 2.0 driver for ELSA ISDN board.
- D channel protocol : DSS1 (EURO-ISDN)
- B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
DEVICE=DSS1C20X.SYS
Parameter:
- /a - IO-Port, e.g. /a160
- /r - IRQ, e.g. /r11
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
DSS1CAPX.SYS
CAPI version 1.1 driver for ELSA ISDN board.
- D channel protocol : DSS1 (EURO-ISDN)
- B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
DEVICE=DSS1CAPX.SYS <parameters>
Parameter:
- /a - IO-Port, e.g. /a160
- /r - IRQ, e.g. /r11
- /N0=MSN0 - /N9=MSN9 - Allocation of MSNs
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
ISDNC20X.SYS
CAPI version 2.0 driver for ELSA ISDN board.
- D channel protocol : 1TR6 (national ISDN)
- B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 modem function (V.34), Fax group 3 function (V.34 only for PCFpro, QuickStep 3000 and QuickStep 3000-PCI). FAX only for PCF, PCFpro, QuickStep 3000 and QuickStep 3000-PCI.
DEVICE=ISDNC20X.SYS
Parameter:
- /a IO-Port, e.g. /a160
- /r IRQ, e.g. /r11
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
No | Yes | Yes | Yes |
Eicon
CAPI20.OS2
Eicon Diehl COMMON-ISDN-API Version 2.0.
DEVICE=CAPI20.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
DIAPIS.OS2
Eicon Diehl COMMON-ISDN-API Version 1.1.
DEVICE=DIAPIS.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
DIDD.OS2
This device driver stores the configuration information of every installed Eicon.Diehl ISDN-Adapter using the DI(Direct)-Interface and has to be installed before any ISDNSDI.OS2 or ISDNPDI.OS2 drivers.
DEVICE=DIDD.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
DIMAINT.OS2
This device driver is a trace interface for all installed Eicon Diel ISDN adapters and is used by the DILOG.EXE application. The content of a DILOG trace depends on the driver which writes information into the DIMAINT buffer. DIMAINT uses no parameter.
DEVICE=DIMAINT.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
DIVAPP.OS2
This utility represents the Plug and Play (PnP) enabler for the Eicon Diehl ISA Plug and Play ISDN adapters.
DEVICE=DIVAPP.OS2 <parameters>
- Parameter
- -a
I/O address for adapter
- -i
Interrupt number to use
- -q
Quiet mode
- -v
Verbose mode, print detailed information onto screen.
Platform Support:
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TED1TR6.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TED1TR6.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TED5ESS.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TED5ESS.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDATEL.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDATEL.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDBELG.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDBELG.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDETSI.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDETSI.OS2
Platform Support:
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDFRANC.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDFRANC.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDJAPAN.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDJAPAN.OS2
Platform Support:
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDNI.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDNI.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
TEDSWED.OS2
The TED.OS2 loads the Eicon Diehl ISDN protocol specified by the name "Protocol" and installs the IDI interface.
DEVICE=TEDSWED.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
HST
CAPIVDEV.SYS
Virtual Device Driver (VDD)32 bit for HST Janus ISDN Cards for DOS.
DEVICE=CAPIVDEV.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
CCAXI.SYS
Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for 1TR6(German) protocol.
DEVICE=CCAXI.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
CCAXE.SYS
Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol.
DEVICE=CCAXE.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
SCAX.SYS
Device driver for HST Janus ISDN ISA-Cards and CAPI v.1.1/2.0 for 1TR6 (German) protocol.
DEVICE=SCAX.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
SCAXE.SYS
Device driver for HST Janus ISDN ISA-Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol.
DEVICE=SCAXE.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
IBM
BIPMAC.OS2
This is a driver for the IBM Active 2000 ISDN card.
DEVICE=x:\IBMbip\OS2\BIPMAC.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
BIPPDD.OS2
This is a driver for the IBM Active 2000 ISDN card.
DEVICE=x:\IBMbip\OS2\BIPPDD.OS2 <parameter>
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
Teles
BUNDLE.SYS
Module for Teles ISDN Cards.
DEVICE=BUNDLE.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
CAPI.DLL
CAPI-DLL v.1.1 16-bit for ISDN Cards.
DEVICE=CAPI.DLL
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
CAPI20.DLL
CAPI-DLL v.2.0 32-bit for ISDN Cards.
DEVICE=CAPI20.DLL
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
DSS1TE.SYS
Euro ISDN Module for Teles ISDN Cards
DEVICE=DSS1TE.SYS
TIP: If you not already have one better get one from ELSA. Newer Teles Cards are reported to produce many problems (if not fail in general) and there is definetly no further OS/2 development. Also newer Driver Versions (> 2.97) are reported to make trouble.
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
HDLC.SYS
HDLC Module for Teles ISDN Cards.
DEVICE=HDLC.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
ISDNAPI.SYS
Module for Teles ISDN Cards.
DEVICE=ISDNAPI.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
No | Yes | Yes | Yes |
S0TE.SYS
Module for Teles ISDN-Cards.
DEVICE=S0TE.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
SOAB.SYS
Module for Teles ISDN Cards.
DEVICE=SOAB.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
Misc
CFOS.SYS
CFOS is a driver that sits between your ISDN hardware and your Modem Software (Internet Dialer, Terminal program). It emulates a COM port. 'cFos' device driver receives the usual modem commands, the so-called AT commands from the communication programs and turns them into the corresponding ISDN CAPI commands. ISDN CAPI responses are turned into modem responses of the same meaning, so that the communication programs 'understand' them.
DEVICE=C:\Cfos\Cfos.Sys <parameters>
As you can enter any equipment names (e.g.: ISDN1) or several COM ports (a maximum of two in the shareware version, up to 30 in 'cFos Professional'). Be careful not to enter COM ports that actually exist as hardware and are in use (e.g. a COM port for your mouse).
NOTE: The CFOS.SYS driver should be loaded after drivers for serial interfaces (COM.SYS oder SIO.SYS) and after the CAPI driver.
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
CFOS20.SYS
CAPI 2.0 CFOS device driver, for more details see DEVICE CFOS.SYS.
DEVICE=CFOS20.SYS
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
KSCOM.SYS
Kamell ISDN Comport Device Driver (At-Commands with Fax Class 2.0)
DEVICE=KSCOM.SYS <parameter>
Parameter:
- /P:COMx - Port (Default COM3)
- /C:x - Controller (Default Controller)
- /S:x - Serialnumber
- /A:x - Activation key
- /K:DIVA - Cardtype (only for Eicon Diehl DIVA Cards Version 5.0.3 or higher)
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |
MACMYWI.OS2
ISDNPM Support Driver.
DEVICE=MACMYWI.OS2
OS/2 2.x | OS/2 3.0 | OS/2 4.0 | OS/2 4.5x |
---|---|---|---|
Yes | Yes | Yes | Yes |