The Config.sys Documentation Project/DEVICE Statements

From EDM2

Jump to: navigation, search

Return to The Config.sys Documentation Project Main Page

Device Drivers are needed by OS/2 to work with your installed hardware. The Device Drivers are loaded after the Base Device Drivers Unlike the Base Device Drivers, the Device Drivers are loaded in the order they appear in the config.sys file. The following pages describe these entries:

Contents

[edit] DEVICE=$ICPMOS2.SYS

Power Management Driver for PCMCIA 

  DEVICE=$ICPMOS2.SYS

ATTENTION: Must be after all other listed drivers in the config.sys.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=ACCND.OS2

ACCTON EN1207D Series Ethernet PCI Adapter NDIS driver: http://www.accton.com/accton/products/adapters/en1207d_wol/base.html Network card in IBM's netvista 6269N2G 

  DEVICE=ACCND.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ACECAD.SYS

Driver for the ACECATIII digitizing board. 

  DEVICE=ACECAD.SYS

for working DEVICE=E:\OS2\BOOT\MOUSE.SYS STYPE=ACECAD$ must be added

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=AD1816DD.SYS

Analog Devices AD1816 Soundport Driver 

 DEVICE=AD1816DD.SYS

Parameter:

  • /N:$strng$

Device driver name assigned by MINSTALL

  • /3:y

3D Phase expansion (0-31)

NOTE: The Aztech SC16-3D sound card has an Analog Devices AD1816 chip whose drivers should work, in theory. The problem is that this card does not report itself as a standard AD1816 based board, so even though the PnP-Manager correctly initializes the card, the driver can neither recognize the board nor pick up the IRQ, I/O, and DMA values from the PnP-Manager. Martin Schaffoener (martin.schaffoener@student.uni-magdeburg.de) patched the driver so it will work also with this card. Search for azsc163d.zip

[edit] DEVICE=ADSMSDIS.SYS

Personally Safe n Sound tape backup driver that from Warp Server for E-Business 

 DEVICE=ADSMSDIS.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ADSMTAPE.SYS

Personally Safe n Sound tape backup driver that from Warp Server for E-Business. 

  DEVICE=ADSMTAPE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No No No Yes Yes Yes

DEVICE AFINET.SYS Part of the TCP/IP Protocol Drivers. 

  DEVICE=C:\Mptn\Potocol\Afinet.sys

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=AFINETK.SYS

32bit TCP/IP Protocol Drivers using the KEE API introduced with WSeB and Fixpak13 for Warp 4 Part of the TCP/IP Ver. 4.x firewall 

  DEVICE=AFINETK.SYS

Parameter:

  • /V

Verbose, shows version-number

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No No Yes-FP13 Yes Yes Yes

[edit] DEVICE=AFNB.SYS

Basic-NetBIOS-Socket-Support Driver. 

  DEVICE=AFNB.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=AFOS2.SYS

Part of the TCP/IP Protocol Drivers 

  DEVICE=C:\Mptn\Potocol\Afos2.sys

Parameter:

  • /V

Verbose, shows version-number

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=AIRO340.SYS

Cisco Systems 340 Series Wireless Lan Adapter. 

  DEVICE=AIRO340.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes


[edit] DEVICE=ALC.SYS

ALC* AC97 Audio Codec OS/2 Device Driver. http://www.realtek.com.tw/htm/download/driver.asp 

  DEVICE=ALC.SYS

Parameter:

  • I5

The 'I' means interrupt, the available interrupts are 5, 7, 9, 10, 11, 12 and 15

  • N:ALC1$

Physical Device Driver name

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes


[edit] DEVICE=AMOUSE.SYS

Mouse Driver for Wheel Mices. like e.g. the:

  • Logitech Pilot Mouse+
  • Logitech Mouse Man+
  • Logitech Optical Wheel Mouse
  • Microsoft Intellimouse
  • IBM Scrollpoint Mouse
  • Typhoon 40159
  • Trust 250S 
  DEVICE=AMOUSE.SYS

NOTE: With Amouse installed XFree86 refuses to work Available for FREE at http://home.t-online.de/home/klaus.breining/

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes


[edit] DEVICE=ANSI.SYS

This driver installs the ANSI support for DOS windows. 

  DEVICE=C:\OS2\MDOS\ANSI.SYS <parameters>

Parameters:

  • /X

Enables the redefinition of keys.

  • /K

Prevents the use of extended keyboards. Extended keyboards work as standard keyboards.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=APM.SYS

Advanced Power Management (APM) device driver. Provides support for your APM BIOS on your motherboard. 

  DEVICE=C:\Os2\Boot\Apm.sys parameter

Parameter:

  • /B

favorizes the direct connection to the APM-BIOS support

  • /D

favorizes the device-driver connection of the APM support

  • /V

x.y forces the compatibility to APM Version x.y (e.g. 1.0)

Together with the APMDAEMN.SYS these settings can also be done by using the Power-Symbol in your System Setup Folder.

TIP: To work correctly you have 1. to change your Warp-Center properties to 'Show only when Mouse is over Center's position' and 2. enable in 'Power Properties' in your System folder on the 'Performance' page 'Automaticall change performance when the power source changes'. (Only tested with Warp4 fixpak 13).

TIP: When OS/2 fails to install in ACPI only Systems REM this driver (has to be done on the Installationdisks too) or give APM_NH.SYS a try, it is rported to work on Intel based Motherborads too.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes


[edit] DEVICE APM_NH.SYS

Replacement APM driver (APM_NH.SYS) APM_NH.SYS is based on 10.037 level of IBM's APM.SYS (same as XR_D002 but probably outdated with respect to OS/2 v 4.52 G.A.). Its purpose is to honor the APM hooks installed by VIAAPM.SYS while allowing usual APM tasks such as power-down or suspend mode. It is therefore essential that one installs APM_NH.SYS rather than APM.SYS, so the KT266A idle hook would not be taken out by IBM's driver. 

  DEVICE APM_NH.SYS

Tip: In System which only have ACPI it is reported that APM-NH.SYS works even it is a Intel chipset.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=APPOINT.SYS

Pen for OS/2 Device Driver for Kurta PenMouse/APT Gliffic Plus. 

  DEVICE=APPOINT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ARLTNDIS.OS2

ARtem Onair ComCard. The ComCard is a IEEE 802.11 compliant wireless LAN network card. For more Information see http://www.artem.de 

  DEVICE=ARLTNDIS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ARTPAD.SYS

Device Driver for Wacom Artpad used with Pen for OS/2 

  DEVICE=ARTPAD.SYS

IRQ=4 COMPORT=1 ADRESS=3F8 is used for Com1 IRQ=3 COMPORT=2 ADRESS=2F8 is used for Com2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ARTZ.SYS

Pen for OS/2 Device Driver for Wacom UD-0608. 

  DEVICE=ARTZ.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASNPCI.OS2

AsanteFast 10/100 PCI Ethernet driver. 

 DEVICE=ASNPCI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASP4CORE.SYS

Vortex AU8820 Core OS/2 driver. 

  DEVICE=ASP4CORE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASP4JOY.SYS

Vortex AU8820 OS/2 Joystick driver. 

  DEVICE=ASP4JOY.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASP4OS2.SYS

Vortex AU8820 OS/2 MMPM/2 driver. 

  DEVICE=ASP4OS2.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASP4VDD.SYS

Vortex AU8820 Virtual DOS driver. 

  DEVICE=ASP4VDD.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASPIDRV.SYS

ASPI Driver supplied by Solution Technology Inc. 

  DEVICE=ASPIDRV.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASPIPFA.SYS

Device driver used to distinguish between IDE drives and SCSI drives when using Hard Disk Drive Monitor.

The Hard Disk Drive Monitor monitors the status of SMART-compatible harddisk drives in your computer. available as ftp://ftp.pc.ibm.com/pub/pccbbs/commercial_desktop/zp1t06a.exe 

  DEVICE=ASPIPFA.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASPIROUT.SYS

The interface of ASPI Router merely is an extension of the interface of OS2-ASPI.DMD needed e.g. by the FREE CDRECORD/2 by Chris Wohlgemuth available at: http://www.geocities.com/SiliconValley/Sector/5785/ and by the FREE SANE (Scanner Access Now Easy) By Yuri Dario available at http://www.geocities.com/SiliconValley/Peaks/4320. 

  DEVICE=ASPIROUT.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ASPITAPE.SYS

GTAK Driver for SCSI tape access by GTAR scsitape.dmd and scsitape.sys also belong to the package By Andreas Kaiser Andreas.Kaiser@stuttgart.netsurf.de, gtak258.zip gtar258.zip. 

  DEVICE=ASPITAPE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ATALK.SYS

Appletalk driver from Lanserver for Macintosh 

 DEVICE=ATALK.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=ATI0.sys

Used by ATI 3D Rage graphic cards. 

  DEVICE=C:\OS2\ATI0.sys

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=ATIM64.SYS

Used by ATI 3D Rage grafic cards. 

  DEVICE=C:\OS2\ATIM64.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes


[edit] DEVICE=ATKP.SYS

Appletalk PAP Port driver from Lanserver for Macintosh. 

  DEVICE=ATKP.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=AUDIOVDD.SYS

This is the standard VDD for audio device drivers that prevents DOS sessions from accessing the audio hardware when an OS/2 session is using it and vice versa. The driver comes with OS/2 and is used by a lot of diferent soundcards. 

  DEVICE=C:\MMOS2\AUDIOVDD.SYS

Parameter:

  • PAS161$ for the MediaVision's ProAudio Spectrum Soundcard
  • SBAUD1$ for the Sound Blaster 16 sound card

NOTE: the parameter is the link between the OS2 driver and the DOS driver. The DOS driver inherits it's settings associated with the parameter

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes


[edit] DEVICE=AVMB1.SYS

Driver for the AVM Active ISDN-Controller B1. 

  DEVICE=AVMB1.SYS

Parameter:

  • /$

If old programs needs the old naming convention (like an outdated CFOS).

NOTE: The passive AVM-Cards (like the Fritzcard) aren't supported by AVM with OS/2 Drivers.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes


[edit] DEVICE=B57.OS2

Broadcom Corporation 10/100/1000 NetXtreme Ethernet DOS/OS2 NDIS2 driver. 

  DEVICE=B57.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes


[edit] DEVICE=BIPMAC.OS2

This is a driver for the IBM Active 2000 ISDN card. 

  DEVICE=C:\IBMbip\OS2\BIPMAC.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=BIPPDD.OS2

This is a driver for the IBM Active 2000 ISDN card. 

  DEVICE=C:\IBMbip\OS2\BIPPDD.OS2 <parameter>

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=BIXANDIS.OS2

BinTec XAIR WLan PC Card http://www.bintec.de/de/index.php?r=prod/XAir&m=navbar.html&c=XAirpc.html 

  DEVICE=BIXANDIS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=BT32.SYS

Radio/TV driver for BT878 based Cards 

  DEVICE=BT32.SYS

Parameters:

  • /V

Verbose: Show Copyright information

  • /VM

Verbose modules: Like /V plus module list

  • /3

Execute an INT3 at initialisation (Use kernel debugger!)

  • /NOMODULE

Don't load modules at system startup (Use BT32CFG.EXE to load/unload)

  • /NOCOREMODULE

Don't load core modules at system startup (Use BT32CFG.EXE to load/unload)

  • /MODPARM:

Support Linux insmod parameters for various modules

  • /LOADMODULE:

Load module (only with parameter /NOCOREMODULE)

  • /NOIRQ

Disable IRQ for BTTV. This is for test purposes only when the driver traps at startup

NOTE: BT32.SYS must reside after LXAPI32.SYS.

NOTE: BT32.SYS contains the following modules:

  • bttv
  • tvaudio
  • tuner
  • msp3400
  • tda7432
  • tda9875

NOTE: Module parameters: BT32.SYS contains a lot of module parameters. See documentation in the DOC directory of the package. Most important paramers are:

  • bttv card=n Specify a specific BTTV card.
  • tuner=n Specify a specific BTTV tuner.

Valid numbers for n for both parameters are listed in DOC\CARDLIST

See DOC\Insmod-options for all other parameters.

NOTE: If you are using wcast.sys also there may be problems to use the bttv driver after an application has used wcast.sys. (Attention: Multimedia Setup also opens wcast.sys!!!) Known results are: No picture, No sound or both.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=BTSSCSI.SYS

Driver for Back Again/2 SCSI tape support. 

  DEVICE=BTSSCSI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=BUNDLE.SYS

Module for Teles ISDN Cards. 

  DEVICE=BUNDLE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=BUSAUDIO.SYS

C-Media CMI 8330 Soundcard driver (AD 8329 Chip). 

  DEVICE=BUSAUDIO.SYS

Parameters:

  • /D:n

DMA channel, n=0,1 or 3

  • /I:n

Interrupt, n=5,7,9,10,11 or 12

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CAPI.DLL

CAPI-DLL v.1.1 16-bit for ISDN Cards. 

  DEVICE=CAPI.DLL

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CAPI20.DLL

CAPI-DLL v.2.0 32-bit for ISDN Cards. 

  DEVICE=CAPI20.DLL

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CAPI20.OS2

Eicon Diehl COMMON-ISDN-API Version 2.0. 

  DEVICE=CAPI20.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CAPIVDEV.SYS

Virtual Device Driver (VDD)32 bit for HST Janus ISDN Cards for DOS. 

  DEVICE=CAPIVDEV.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CBENDIS.OS2

Xircom CardBus Ethernet 10/100 Adapter 

  DEVICE=CBENDIS.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CBEODI.OS2

Xircom CardBus Ethernet 10/100 Adapter OS/2 Netware ODI driver. 

  DEVICE=CBEODI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CBEODI.OS2

Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for 1TR6(German) protocol. 

  DEVICE=CBEODI.OS2

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CCAXE.SYS

Device driver for HST Janus Saphire ISDN Cards and CAPI v.1.1/2.0 for DSS-1 (ETSI) protocol. 

  DEVICE=CCAXE.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CCSINIT.SYS

ChipChat Sound Initializer only needed with warp 4 

 DEVICE=CCSINIT.SYS

The ChipChat is one of the rare available Soundcards for the microchannel, it is based on the ESS1688. For more information see: http://www.ChipChat.com

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CD1400.SYS

RISC COM CD1400 Device driver by DECISION-COMPUTER INTERNATIONAL Co.,LTD 

  DEVICE=CD1400.SYS

Parameter:

  • /Mxxxx

card memory address

  • /Ixx

IRQ Nø

  • /Cxx

Assign the port number of the first port on the card ( COM1 to COM96 )

NOTE: The driver will autodetect the number of communication ports on the card ( 4 or 8 ports ).

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CDBASPI.SYS

CD-TEK driver to access easily the PIONEER DRM-1804X autochange CD-ROM device. 

  DEVICE=CDBASPI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
Yes Yes Yes Yes Yes Yes

[edit] DEVICE=CDMF.SYS

Used by the Firewall built into TCP/IP 4.1 and above. This is IBM's Commerical Data Masking Facility encryption driver. This driver is an early version of the IBM proposed new national standard encryption protocol (US) with a variable key of up to 128-bits. It supports the VPN (Virtual Private Network) built-in to the firewall of TCPIP 4.1 and later. This driver uses a larger data block than DES and is faster than competing protocol drivers. It is a enhanced version of DES. Many to don't consider it as strong an algorithm as Blowfish or Ideal, widely available competitors to this protocol. 

  DEVICE=C:\Mptn\Potocol\Cdmf.sys

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes


[edit] DEVICE=CDMGRDRV.SYS

Driver of the FREE CD-Rom Manager for Plextor SCSI CD-ROM drives. Developed by Markus and Christian Mueller. 

  DEVICE=CDMGRDRV.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=CDROMMGR.DMD

CD-ROM device manager which prevents subsequent requests to different slots of a CD changer. 

  DEVICE=CDROMMGR.DMD

NOTE: OS2CDROM.DMD must be disabled to work.

Parameter:

  • /T:n

CDROMMGR.DMD has the changer feature enabled by default. It prevents slot changes for 1000ms by returning ERROR_DEVICE_NOT_READY to the caller. The timeout value can be set at load time through option /T: The valid range is from 1 second up to 60 seconds. If CDROMMGR.DMD does not find a CD Changer device, the feature will automatically be disabled and cannot be activated.

  • /C

CDROMMGR.DMD will manage only CD Changers. Normal CD-ROM drives or CD Burners will not get allocated. This option is useful if you want to use another CD-ROM device manager for special features, like CTCDROM.DMD for Unite CD-Maker. To make sure that CDROMMGR.DMD gets control over the CD Changer devices, it has to be loaded as the first CD-ROM manager.

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=CE3NDIS.OS2

Xircom Ethernet Adapter 10/100 NIC driver packages available at http://pws.prserv.net/mckinnis/nicpak/pcmcia.zip. 

  DEVICE=CE3NDIS.OS2


Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes

[edit] DEVICE=CFMASPI.SYS

Driver for the TWAIN Scanner Module by CFM (Computer for Mankind) 

  DEVICE=CFMASPI.SYS

Platform Support:

OS/2 2.x OS/2 3.0 OS/2 4.0 OS/2 4.5x eCS 1.x eCs 2.x
No Yes Yes Yes Yes Yes
</