TI11225CB.SYS
From EDM2
Socket Services driver for Dell Latitude CpiA
BASEDEV=TI11225CB.SYS
Parameter
- /C0=z - These parameters define the IRQ level to be used by the
- /C1=z - Socket Services driver. The new Card Services and Socket Services drivers for OS/2 do not use a hardware interrupt to notify the PCMCIA status change, so you do not need these parameters.
- /IG0=y - This parameter defines a slot number, which Socket Services ignores. If you use the "Point enabler" supplied with a PC Card, you should take into consideration the coexistence with Socket Services.
- /RI0=x - This parameter defines a slot number, where Socket Services disables the RI_OUT signal. For Example, "/RI0=1" specifies slot 1.
- /D - This parameter enables "Warm docking" from the view point of PCMCIA hardware. By adding this parameter, two additional PCMCIA slots are reserved for the docking station.
- /APOFF - This parameter turns off the Auto-Power Mode. If the Auto-Power Mode is ON, a PC Card will be automatically turned ON by the hardware when it is inserted. The default for Auto-Power Mode is ON.
- /IO0=s - This parameter defines the slot number, for which Socket Services will change the way the -IOCS16 signal is generated. By default, the -IOCS16 signal is generated based on the -IOIS16 signal from the PC Card. If this parameter is specified, the -IOCS16 signal is generated based on the I/O data size which is specified by the Client program. This option is needed for some cards which do not generate the -IOIS16 signal. You need to verify this information with PCMCIA card vendors.
Product Support | |
---|---|
OS/2 1.3 | |
OS/2 2.0 | |
OS/2 2.1 | |
OS/2 2.11 SMP | |
OS/2 Warp 3 | C |
OS/2 Warp Connect | C |
OS/2 Warp 4 | C |
OS/2 Warp Server for e-Business | C |